Search NASA⌕ Search

SEARCH · Search NASA

Results for “polymeric materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Space environmental effects on polymeric materials

Polymeric materials that may be exposed on spacecraft to the hostile environment beyond Earth's atmosphere were subjected to atomic oxygen, electron bombardment, and ultraviolet radiation in terrestrial experiments. Evidence is presented for the utility of an inexpensive asher for determining the relative susceptibility of organic polymers to atomic oxygen. Kapton, Ultem, P1700 polysulfone, and m-CBB/BIS-A (a specially formulated polymer prepared at NASA Langley) all eroded at high rates, just as was observed in shuttle experiments. Films of Ultem, P1700 polysulfone, and m-CBB/BIS-A were irradiated with 85 keV electrons. The UV/VIS absorbance of Ultem was found to decay with time after irradiation, indicating free radical decay. The tensile properties of Ultem began to change only after it had been exposed to 100 Mrads. The effects of dose rate, temperature, and simultaneous vs. sequential electron and UV irradiation were also studied.

Kiefer, Richard L.↗
NASA NTRS1990

Dynamic mechanical analysis of polymeric materials

Polymeric materials exhibit mechanical behavior which is dependent on temperature. Dynamic mechanical analysis measures the mechanical damping and resonant frequency of a material over a temperature range. Values of the dynamic loss modulus, storage modulus, and loss tangent can be calculated from these data. The glass transition temperature and onset temperature are obtained from curves of the dynamic moduli versus temperature.

Kern, Kristen T.↗
NASA NTRS1990

Nonintrusive method and apparatus for monitoring the cure of polymeric materials

The invention is a nonintrusive method of monitoring the cure of a polymeric material using an electromagnetic field to sense a change of resistance of the polymeric material in the electromagnetic field that occurs during curing. This change of resistance is used to vary the impedance of an alternating voltage power supply that produces the electromagnetic field and which change of impedance is measured periodically or continuously to monitor the cure of said polymeric material. The apparatus for practicing the method of this invention may include a nonintrusive sensing head providing an inner, electromagnetic core within an open ended outer pot formed of magnet material. The open end of the pot core is positioned from a selected area of the surface of a sheet of the polymeric material. An alternating voltage supply circuit includes an inductance coil around the electromagnetic core and capacitor connected in parallel with the inductance coil forms a resonant tank circuit when energized. The resulting change in resistance of the polymeric material opposite the open end, a function of the curing, is measured as a corresponding change in the impedance of the power supply circuit to thereby monitor the cure of the polymeric material in the selected area.

Johnston, David F.↗
NASA NTRS1984

Vacuum stability requirements of polymeric material for spacecraft application

The purpose of this document is to establish outgassing requirements and test guidelines for polymeric materials used in the space thermal/vacuum environment around sensitive optical or thermal control surfaces. The scope of this document covers the control of polymeric materials used near or adjacent to optical or thermal control surfaces that are exposed to the thermal/vacuum environment of space. This document establishes the requirements and defines the test method to evaluate polymeric materials used in the vicinity of these surfaces in space applications.

Craig, J. W.↗
NASA NTRS1976

Apparent lethal concentrations of pyrolysis products of some polymeric materials

Thirty-nine samples of polymeric materials were evaluated to determine the apparent lethal concentrations of their pyrolysis products. The materials were compared on the basis of the apparent lethal concentration for 50 percent of the test animals. Relative toxicity rankings based o apparent lethal concentration values can differ significantly depending on whether they are based on weight of sample charged or weight of sample pyrolyzed. The ranking of polyphenylene sulfide is particularly sensitive to this difference.

Hilado, C. J.↗
NASA NTRS1990

The reaction efficiency of thermal energy oxygen atoms with polymeric materials

The reaction efficiency of several polymeric materials with thermal-energy (0.04 eV translational energy), ground-state (O3P) oxygen atoms was determined by exposing the materials to a room temperature gas containing a known concentration of atomic oxygen. The reaction efficiency measurements were conducted in two flowing afterglow systems of different configuration. Atomic oxygen concentration measurements, flow, transport and surface dose analysis is presented in this paper. The measured reaction efficiencies of Kapton, Mylar, polyethylene, D4-polyethylene and Tedlar are .001 to .0001 those determined with high-energy ground-state oxygen atoms in low earth orbit or in a high-velocity atom beam. D4-polyethylene exhibits a large kinetic isotope effect with atomic oxygen at thermal but not hyperthermal atom energies.

Koontz, S. L.↗
NASA NTRS1990

Thermomechanical properties of polymeric materials and related stresses

The thermomechanical analysis (TMA) and dynamic mechanical analysis characterizations of a polymeric material yield useful data relating to the thermomechanical stresses of eight widely used polymeric materials. The materials encompass Lexan, Plexiglass, Epon, Conap, Uralane, Solithane, and Humiseal. A combined profile of the coefficient of thermal expansion (CTE) and the modulus change over a wide temperature range obtained by these analytical methods indicates the drastic effects of glass transition on both the CTE and the modulus of a polymer. TMA can also detect secondary transitions, and provides a convenient means for the study of a polymer's toughness.

Lee, Sheng Yen↗
NASA NTRS1989

Polymeric materials science in the microgravity environment

The microgravity environment presents some interesting possibilities for the study of polymer science. Properties of polymeric materials depend heavily on their processing history and environment. Thus, there seem to be some potentially interesting and useful new materials that could be developed. The requirements for studying polymeric materials are in general much less rigorous than those developed for studying metals, for example. Many of the techniques developed for working with other materials, including heat sources, thermal control hardware and noncontact temperature measurement schemes should meet the needs of the polymer scientist.

Coulter, Daniel R.↗
NASA NTRS1986

The effects of energetic proton bombardment on polymeric materials: Experimental studies and degradation models

This report describes 3 MeV proton bombardment experiments on several polymeric materials of interest to NASA carried out on the Tandem Van De Graff Accelerator at the California Institute of Technology's Kellogg Radiation Laboratory. Model aromatic and aliphatic polymers such as poly(1-vinyl naphthalene) and poly(methyl methacrylate), as well as polymers for near term space applications such as Kapton, Epoxy and Polysulfone, have been included in this study. Chemical and physical characterization of the damage products have been carried out in order to develop a model of the interaction of these polymers with the incident proton beam. The proton bombardment methodology developed at the Jet Propulsion Laboratory and reported here is part of an ongoing study on the effects of space radiation on polymeric materials. The report is intended to provide an overview of the mechanistic, as well as the technical and experimental, issues involved in such work rather than to serve as an exhaustive description of all the results.

Coulter, D. R.↗