Search NASA⌕ Search

SEARCH · Search NASA

Results for “precipitation characteristics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Sulfide precipitation characteristics of Mn, Ni, Co, and Zn in the presence of contaminant metal ions

In this study, the effects of Al 3+ and Fe 2+ on the precipitation characteristics of four valuable metals, including Mn 2+ , Ni 2+ , Co 2+ , and Zn 2+ , were investigated by conducting solution chemistry calculations, sulfide precipitation tests, and mineralogy characterizations. It was found that the ability of the valuable metals to form sulfide precipitates followed an order of Zn 2+ > Ni 2+ > Co 2+ > Mn 2+ . The sulfide precipitate of Zn 2+ was the most stable and did not re-dissolve under the acidic condition (pH 4.00 ± 0.05). In addition, the sulfide precipitation characteristics of Zn 2+ was barely affected by the contaminant metal ions. However, in the presence of Al 3+ , the precipitation recoveries of Mn 2+ , Ni 2+ , and Co 2+ were noticeably reduced due to simultaneous hydrolysis and competitive adsorption. The precipitation recoveries of Ni 2+ and Co 2+ in solutions containing individual valuable metals also reduced when Fe 2+ was present, primarily due to competitive precipitation. However, the recovery of Mn 2+ was enhanced due to the formation of ferrous sulfide precipitate, providing abundant active adsorption sites for Mn species. Here, in the solution containing all the valuable metals, Fe 2+ promoted the recovery of the valuable metals due to the higher concentration of Na 2 S and the formation of ferrous sulfide precipitate.

58 GEOSCIENCES↗

Precipitation Characteristics and Future Changes Over the Southern Slope of Tibetan Plateau Simulated by a High-Resolution Global Nonhydrostatic Model

Current climate model resolution cannot accurately describe the complex topography over the Tibetan Plateau, which limits our understanding of past and future precipitation over this region. This study investigates the daily precipitation characteristics and its future changes over the Tibetan Plateau, especially for the southern slope of Tibetan Plateau (SSTP), by 14-km Nonhydrostatic ICosahedral Atmospheric Model (NICAM) with explicitly calculated convection for historical and future 30-years period. By comparing with the satellite Global Precipitation Measurement (GPM), NICAM well reproduces the historical precipitation spatial pattern, seasonal cycle, and the extreme precipitation belt over SSTP, but overestimates precipitation amount by~35%. It is found that heavy precipitation probability decreases as elevation becomes higher while the light precipitation generally shows the opposite. For the precipitation changes during June to September from 1979–2008 to 2075–2104, NICAM predicts that mean precipitation will decrease over low-level SSTP but increase over high-level SSTP. Nonprecipitation and heavy precipitation probability will increase while light precipitation probability will decrease in the future over SSTP. The extreme precipitation probability and intensity will increase ~50%/°C and ~8%/°C over SSTP, and this increase is more obvious as elevation becomes higher. The robust increase of extreme precipitation along the SSTP topography is unique and has not been identified by the climate model simulations before. The strong meridional gradient of specific humidity over SSTP is found to be further enhanced under global warming, and this gradient enhancement is suggested to be responsible for the increase in the extreme precipitation over SSTP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Can the GPM IMERG Final Product Accurately Represent MCSs’ Precipitation Characteristics over the Central and Eastern United States?

Mesoscale convective systems (MCSs) play an important role in water and energy cycles as they produce heavy rainfall and modify the radiative profile in the tropics and midlatitudes. An accurate representation of MCSs’ rainfall is therefore crucial in understanding their impact on the climate system. The V06B Integrated Multisatellite Retrievals from Global Precipitation Measurement (IMERG) half-hourly precipitation final product is a useful tool to study the precipitation characteristics of MCSs because of its global coverage and fine spatiotemporal resolutions. However, errors and uncertainties in IMERG should be quantified before applying it to hydrology and climate applications. This study evaluates IMERG performance on capturing and detecting MCSs’ precipitation in the central and eastern United States during a 3-yr study period against the radar-based Stage IV product. The tracked MCSs are divided into four seasons and are analyzed separately for both datasets. IMERG shows a wet bias in total precipitation but a dry bias in hourly mean precipitation during all seasons due to the false classification of nonprecipitating pixels as precipitating. These false alarm events are possibly caused by evaporation under the cloud base or the misrepresentation of MCS cold anvil regions as precipitating clouds by the algorithm. IMERG agrees reasonably well with Stage IV in terms of the seasonal spatial distribution and diurnal cycle of MCSs precipitation. A relative humidity (RH)-based correction has been applied to the IMERG precipitation product, which helps reduce the number of false alarm pixels and improves the overall performance of IMERG with respect to Stage IV.

54 ENVIRONMENTAL SCIENCES↗

Southern Ocean Precipitation Characteristics Observed From CloudSat and Ground Instrumentation During the Macquarie Island Cloud & Radiation Experiment (MICRE): April 2016 to March 2017

A 1-year blended surface precipitation data set using Parsivel disdrometer, surface W-band radar, and tipping bucket measurements is produced for the Macquarie Island Cloud and Radiation Experiment (MICRE) and compared with retrievals from CloudSat (spaceborne 94 GHz radar). Surface precipitation was observed 44% ± 4% of the time between April 2016 and March 2017. Precipitation composed primarily of small particles (diameter <1 mm) occurred about 36% ± 2% of the time, constituting 10% of total accumulation. Remaining precipitation contained enough large particles such that the disdrometer could be used to identify the precipitation type as rain, ice, snow or wet snow. Seasonal and annual statistics on frequency of occurrence and accumulation for each precipitation type observed during MICRE are presented. Most ice and mixed phase precipitation was shallow, originating at a height of 3 km or lower, and occurred most often when Macquarie Island was to the northwest of the nearest cyclonic low-pressure center. In contrast, rain was more often deep and occurred most frequently when the island was to the southeast of cyclonic lows. A weak diurnal cycle in frequency and mean rate was present with a minimum between 12:00 and 14:00 local time and maximum between 03:00 and 06:00 local time. The CloudSat 2C-Precip-Column product missed the lightest precipitation (because the near-surface reflectivity is <-15 dBZ) and overestimated total liquid precipitation and occurrence of mixed phase precipitation, but captured reasonably well the distribution of rain rates for rates >0.5 mm/hr.

54 ENVIRONMENTAL SCIENCES↗

Precipitation Characteristics of Warm Season Weather Types in the Southeastern United States of America

Daily weather types (WTs) over the Southeast United States have been analyzed using 850 hPa winds from reanalysis data from March to October of 1979–2019. Six WTs were obtained. WTs 1–3 represent mid-latitude synoptic systems propagating eastward. WT4 is a summer-type pattern predominantly occurring in June–August, with the center of the North Atlantic Subtropical High (NASH) along the Gulf coast in the southern United States. WT5 is most frequent from August to middle October, with the NASH pushed further north and southerly winds over the northern Great Plains. An anticyclone centered at the Carolina coast characterizes WT6, which occurs in all months but is slightly more frequent in the spring and fall, especially in October, corresponding to fair weather in the region. WTs 1, 2 and 3 can persist for only a few days. WTs 4, 5 and 6 can have long spells of persistence. Besides self-persistence, the most observed progression loop is WT1 to WT2, to WT3, and then back to WT1, corresponding to eastward-propagating waves. WTs 4 and 5 are likely to show persistence, with long periods of consecutive days. WT6 usually persists but can also transfer to WT3, i.e., a change from fair weather in the Southeast U.S. to rainy weather in the Mississippi River Valley. A diurnal cycle of precipitation is apparent for each WT, especially over coastal plains. The nocturnal precipitation in central U.S. is associated with WT3. WTs 1–3 are more frequent in El Niño years, corresponding to stronger westerly wave activities and above normal rainfall in the Southeast U.S. in the spring. The positive rainfall anomaly in the Mississippi and Ohio River valley in El Niño years is also associated with more frequent WT3.

54 ENVIRONMENTAL SCIENCES↗

Investigating Mechanisms Driving Differences in the Characteristics of Precipitation in the E3SM Multiscale Modeling Framework With 2D Versus 3D Cloud Resolving Model Configurations

Abstract In this study, we compare the Energy Exascale Earth Systems Model (E3SM) multiscale modeling framework (MMF) with the cloud resolving model (CRM) configured in two (2dMMF) and three (3dMMF) dimensions. We explore how CRM dimensionality impacts the representation of mean and extreme precipitation characteristics. Our results show that tropical mean precipitation patterns are better represented in 3dMMF compared to observations (Integrated Multi‐satellitE Retrivals for GPM and Global Precipitation Climatology Project One Degree Daily products), while 2dMMF better captures extreme precipitation intensity, with systematic land‐ocean differences in precipitation and cloud‐associated variables. These differences are attributed to the co‐occurrence of CRM throttling (i.e., suppressed convection in due to smaller numbers of CRM columns and domain size) and dilution (i.e., 3‐D cloud circulations with increased entrainment and lower precipitation efficiency) effects. Overall, throttling results in more low‐level humidity in 2dMMF and dilution contributes to more high clouds with less precipitation efficiency in 3dMMF. Since throttling occurs more strongly over the ocean than land, the 3dMMF tends to have less cloud liquid and precipitation over the ocean and more cloud ice and precipitation over land. These results may serve as a guide for choosing the CRM structure to reduce precipitation and cloud‐related biases.

54 ENVIRONMENTAL SCIENCES↗

Characteristics of Electron Precipitation During 40 Energetic Electron Injections Inferred via Subionospheric VLF Signal Propagation

Energetic electron injection events are associated with energetic electron precipitation (EEP) through possible resonant wave-particle interactions. Previous studies confirm the impacts of injection-driven precipitation on observed amplitude/phase of subionospheric VLF (very low frequency) signals transmitted from distant artificial transmitters. Currently, there are substantial uncertainties on precipitation characteristics and flux during injection events. In this work we study 40 injection events selected by Van Allen Probes particle data to investigate the changes in amplitude and phase of VLF signals at ground receivers across Canada during particle injection events. We model the ionospheric effect of the EEP flux to find its impact on VLF propagation and characterize the injection events. Typically, we find a clear phase advance of ~40° in the received VLF signal at Fort Smith (Canada, L = 8) transmitted from U.S. Navy communication transmitter NAA at Maine (USA). Comparing to other VLF transmitter-receiver paths in North America leads us to conclude that effects are only seen on paths with adequately large range >>200 km) through L > 7. Modeling the VLF phase change indicates that in the majority of events (>90%), less than 10% of the strong scattering limit inferred from particle flux measurements at the Van Allen Probes is required to obtain the observed VLF phase signature. The median precipitating flux during energetic particle injections is less than 4 × 10 6 el/cm 2 s sr (<10% of the strong scattering rate) for electrons above ~40 keV extracted from trapped particles energy spectrum. This implies that strong scattering is not typical for these 40 selected energetic electron injection events.

79 ASTRONOMY AND ASTROPHYSICS↗

Evaluating and Improving Convective Parameterization for GCMs Using ARM Observations. Final report

This technical report summarizes the achievements during the project period funded by the Atmospheric System Research (ASR) program. The general goal of the project is to improve the representation of atmospheric deep convection in global climate models. By using DOE Atmospheric Radiation Measurement (ARM) program observations and a hierarchy of models from cloud-resolving to global climate models, we evaluated and improved many aspects of convection parameterization schemes, such as the trigger function for convection and closure condition to determine the amount of convection. We also incorporated the stochasticity of convection into a convection scheme. These improvements, when implemented into the National Center for Atmospheric Research (NCAR) Community Earth System Model (CESM) and the DOE Exascale Energy Earth System Model (E3SM), led to improved simulation of precipitation characteristics, including precipitation intensity, Intertropical Convergence Zone, and Madden-Julian oscillation. The project also improved the representation of microphysical processes in convective clouds. It enables the interaction of cloud microphysics with aerosols in weather and climate models.

54 ENVIRONMENTAL SCIENCES↗

Characteristics of Precipitation and Mesoscale Convective Systems Over the Peruvian Central Andes in Multi 5‐Year Convection‐Permitting Simulations

Abstract Using the Weather Research and Forecasting model with two planetary boundary layer schemes, ACM2 and MYNN, convection‐permitting model (CPM) regional climate simulations were conducted for a 6‐year period, including a one‐year spin‐up period, at a 15‐km grid spacing covering entire South America and a nested convection‐permitting 3‐km grid spacing covering the Peruvian central Andes region. These two CPM simulations along with a 4‐km simulation covering South America produced by National Center for Atmospheric Research (NCAR), three gridded precipitation products, and rain gauge data in Peru and Brazil, are used to document the characteristics of precipitation and mesoscale convective systems (MCSs) in the Peruvian central Andes region. Results show that all km‐scale simulations generally capture the spatiotemporal patterns of precipitation and MCSs at both seasonal and diurnal scales, although biases exist in aspects such as precipitation intensity and MCS frequency, size, propagation speed, and associated precipitation intensity. The 3‐km simulation using MYNN scheme generally outperforms the other simulations in capturing seasonal and diurnal precipitation over the mountain, while both it and the 4‐km simulation demonstrate superior performance in the western Amazon Basin, based on the comparison to the gridded precipitation products and gauge data. Dynamic factors, primarily low‐level jet and terrain‐induced uplift, are the key drivers for precipitation and MCS genesis along the east slope of the Andes, while thermodynamic factors control the precipitation and MCS activity in the western Amazon Basin and over elevated mountainous regions. The study suggests model improvements and better model configurations for future regional climate projections.

Meteorology & Atmospheric Sciences↗

Projected future daily characteristics of African precipitation based on global (CMIP5, CMIP6) and regional (CORDEX, CORDEX-CORE) climate models

In this work, we provide an assessment of future daily characteristics of African precipitation by explicitly comparing the results of large ensembles of global (CMIP5, CMIP6) and regional (CORDEX, CORE) climate models, specifically highlighting the similarities and inconsistencies between them. Results for seasonal mean precipitation are not always consistent amongst ensembles: in particular, global models tend to project a wetter future compared to regional models, especially over the Eastern Sahel, Central and East Africa. However, results for other precipitation characteristics are more consistent. In general, all ensembles project an increase in maximum precipitation intensity during the wet season over all regions and emission scenarios (except the West Sahel for CORE) and a decrease in precipitation frequency (under the Representative Concentration Pathways RCP8.5) especially over the West Sahel, the Atlas region, southern central Africa, East Africa and southern Africa. Depending on the season, the length of dry spells is projected to increase consistently by all ensembles and for most (if not all) models over southern Africa, the Ethiopian highlands and the Atlas region. Discrepancies exist between global and regional models on the projected change in precipitation characteristics over specific regions and seasons. For instance, over the Eastern Sahel in July–August most global models show an increase in precipitation frequency but regional models project a robust decrease. Global and regional models also project an opposite sign in the change of the length of dry spells. CORE results show a marked drying over the regions affected by the West Africa monsoon throughout the year, accompanied by a decrease in mean precipitation intensity between May and July that is not present in the other ensembles. This enhanced drying may be related to specific physical mechanisms that are better resolved by the higher resolution models and highlights the importance of a process-based evaluation of the mechanisms controlling precipitation over the region.

54 ENVIRONMENTAL SCIENCES↗

Scaling of Floods With Geomorphologic Characteristics and Precipitation Variability Across the Conterminous United States

Abstract Accurate flood risk assessment requires a comprehensive understanding of flood sensitivity to regional drivers and climate factors. This paper presents the scaling of floods (duration, peak, volume) with geomorphologic characteristics of the basin (i.e., drainage area, slope, elevation) and precipitation patterns (rainfall accumulation, variability). Long‐term daily streamflow observations over the 20th and early 21st centuries from Hydro‐Climatic Data Network streamgages across the conterminous United States are used to create a flood event database based on their flood stage information. Antecedent daily rainfall accumulation and variability corresponding to these floods are computed using Global Historical Climatology Network daily data set. Two Bayesian scaling models are developed, and the spatial organization of scaling exponents is investigated. The baseline model quantifies the scaling of floods to geomorphologic characteristics. The dynamic model quantifies the scaling of floods to antecedent precipitation distribution which is further conditioned on geomorphologic characteristics. Results show that small and low‐elevation basins have a stronger response to antecedent rainfall distribution in amplifying flood peaks, while high‐elevation steeper basins have a lower response for flood duration and volume. The dynamic models demonstrate that there are significant variations in the flood scaling rates, with the largest rates up to 40% and 4.5% for flood duration, 64% and 44% for peak, and 98% and 40% for volume found across the Northeast, Coastal Southeast, and Northwest with intensifying rainfall accumulation and variability, respectively. This study advances flood predictions by better informing the flood attributes in the context of dynamical land‐atmosphere perturbations.

54 ENVIRONMENTAL SCIENCES↗

Exploratory Precipitation Metrics: Spatiotemporal Characteristics, Process-Oriented, and Phenomena-Based

Abstract Precipitation sustains life and supports human activities, making its prediction one of the most societally relevant challenges in weather and climate modeling. Limitations in modeling precipitation underscore the need for diagnostics and metrics to evaluate precipitation in simulations and predictions. While routine use of basic metrics is important for documenting model skill, more sophisticated diagnostics and metrics aimed at connecting model biases to their sources and revealing precipitation characteristics relevant to how model precipitation is used are critical for improving models and their uses. This paper illustrates examples of exploratory diagnostics and metrics including 1) spatiotemporal characteristics metrics such as diurnal variability, probability of extremes, duration of dry spells, spectral characteristics, and spatiotemporal coherence of precipitation; 2) process-oriented metrics based on the rainfall–moisture coupling and temperature–water vapor environments of precipitation; and 3) phenomena-based metrics focusing on precipitation associated with weather phenomena including low pressure systems, mesoscale convective systems, frontal systems, and atmospheric rivers. Together, these diagnostics and metrics delineate the multifaceted and multiscale nature of precipitation, its relations with the environments, and its generation mechanisms. The metrics are applied to historical simulations from phases 5 and 6 of the Coupled Model Intercomparison Project. Models exhibit diverse skill as measured by the suite of metrics, with very few models consistently ranked as top or bottom performers compared to other models in multiple metrics. Analysis of model skill across metrics and models suggests possible relationships among subsets of metrics, motivating the need for more systematic analysis to understand model biases for informing model development.

54 ENVIRONMENTAL SCIENCES↗

Dominant Controls on Preferential Flow and Their Implications for Future Soil Water Fluxes

Abstract Soil water flow, particularly preferential flow (PF), is a critical control on hydrological and biogeochemical processes, including groundwater recharge, contaminant transport, and carbon cycling. However, it remains challenging to predict PF occurrence across large environmental gradients. Here, we developed a deep learning (DL) model to estimate event‐scale soil water flow velocity and the probability of PF occurrence using high‐frequency soil moisture and precipitation data from 33 sites across the National Ecological Observatory Network. The model demonstrated high skill in predicting the binary occurrence of PF (91% F1‐score; 85% accuracy) but the performance was limited in predicting soil water velocity ( R 2 = 0.31). We found that precipitation characteristics (duration, volume, and intensity) were the most important predictors for soil water velocity. Among the non‐precipitation event variables, sand content showed relatively high predictive skill, though differences among non‐event climate variables were generally modest. Lower sand content was associated with increased predicted soil water velocity, a finding that highlights the role of soil structure in producing more non‐uniform flow, which contrasts with traditional uniform flow models. Projecting a reduced DL model under both moderate and high‐emissions future climate scenarios (2060–2099 Representative Concentration Pathways 4.5 and 8.5), we found ∼7.3% increase under RCP4.5 and ∼15% under RCP8.5 of soil water velocities compared to the historical simulation, while modeled likelihood of PF changed little. These findings suggest climate change is not making PF more frequent, but it is making existing PF pathways more efficient with important consequences for associated nutrient and contaminant transport under climate change. Plain Language Summary Water movement in soil is critical for water quality. While often modeled as a uniform flow process, in reality water moves rapidly through cracks and burrows in what is called “preferential flow” (PF), which limits natural filtration and can transport pollutants. We developed a deep learning model, trained on data from 33 U.S. sites, to predict when and how fast this PF occurs based on precipitation, soil, and climate data. The model showed that precipitation characteristics (duration, intensity, volume) were the most important predictors of PF. Lower soil sand content/higher clay content was associated with faster water flow, likely due to clay soils forming aggregates and cracks that water moves through rather than infiltrating uniformly. Further analyses based on climate projections suggest that the speed at which PF occurs will become more rapid under future climate scenarios compared to historical simulation. This highlights the need to represent PF in soil water models when assessing future water quality. Key Points The effect of precipitation peak intensity on soil water velocities declined with increasing precipitation intensity Antecedent soil moisture failed to predict preferential flow (PF), contrasting the high predictive power of sand content Climate predictions suggest that soil water velocities through PF paths will increase ∼15% by 2099

Li, Bonan↗

A Comprehensive Northern Hemisphere Particle Microphysics Data Set From the Precipitation Imaging Package

Microphysical observations of precipitating particles are critical data sources for numerical weather prediction models and remote sensing retrieval algorithms. However, obtaining coherent data sets of particle microphysics is challenging as they are often unindexed, distributed across disparate institutions, and have not undergone a uniform quality control process. This work introduces a unified, comprehensive Northern Hemisphere particle microphysical data set from the National Aeronautics and Space Administration precipitation imaging package (PIP), accessible in a standardized data format and stored in a centralized, public repository. Data is collected from 10 measurement sites spanning 34° latitude (37°N–71°N) over 10 years (2014–2023), which comprise a set of 1,070,000 precipitating minutes. The provided data set includes measurements of a suite of microphysical attributes for both rain and snow, including distributions of particle size, vertical velocity, and effective density, along with higher-order products including an approximation of volume-weighted equivalent particle densities, liquid equivalent snowfall, and rainfall rate estimates. The data underwent a rigorous standardization and quality assurance process to filter out erroneous observations to produce a self-describing, scalable, and achievable data set. Case study analyses demonstrate the capabilities of the data set in identifying physical processes like precipitation phase-changes at high temporal resolution. Bulk precipitation characteristics from a multi-site intercomparison also highlight distinct microphysical properties unique to each location. This curated PIP data set is a robust database of high-quality particle microphysical observations for constraining future precipitation retrieval algorithms, and offers new insights toward better understanding regional and seasonal differences in bulk precipitation characteristics.

54 ENVIRONMENTAL SCIENCES↗

Laser powder bed fusion of ODS Fe–Cr–Al (0.3Zr, 0.3Y 2 O 3 ): Unveiling processing-microstructure- mechanical property relationships

Here, this study investigates the fabrication of oxide dispersion strengthened (ODS) Fe-Cr-Al alloys via laser powder bed fusion (LPBF) with strategic additions of 0.3 wt% Zr and 0.3 wt% Y 2 O 3 for enhanced mechanical performance in nuclear applications. Systematic processing parameter optimization yielded three distinct conditions: one low-density product with significant defects and two near-full-density materials with improved consolidation. Comprehensive characterization confirmed single-phase α-ferrite matrix formation with successful incorporation of Y-, Zr-, O-, and C-rich precipitates characteristic of ODS alloys. However, precipitate density remained low (∼10 7 cm −3 ), resulting in sink strength values substantially below optimal levels for radiation resistance. Microhardness values (mid-200s HV) correlated inversely with grain size following the Hall-Petch relationship, indicating grain boundary strengthening as the dominant mechanism rather than precipitation strengthening. The optimized processing conditions achieved excellent mechanical properties with room temperature yield strength of approximately 500 MPa and 30 % elongation, demonstrating superior strength-ductility synergy compared to other additively manufactured ODS materials and performance consistent with literature values for LPBF-processed ODS-FeCrAl alloys. This investigation reveals both the potential and limitations of LPBF processing for ODS Fe-Cr-Al alloys. While successful defect-free fabrication was achieved, results highlight the critical need for systematic optimization of processing parameters and post-processing heat treatments to enhance precipitate density for effective dispersion strengthening and radiation resistance while maintaining additive manufacturing advantages.

Additive manufacturing↗