Search NASA⌕ Search

SEARCH · Search NASA

Results for “production process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Demonstration of Parallel Algal Processing: Production of Renewable Diesel Blendstock and a High-Value Chemical Intermediate

Co-production of high-value chemicals such as succinic acid from algal sugars is a promising route to enabling conversion of algal lipids to a renewable diesel blendstock. Biomass from the green alga Scenedesmus acutus was acid pretreated and the resulting slurry separated into its solid and liquor components using charged polyamide induced flocculation and vacuum filtration. Over the course of a subsequent 756 hours continuous fermentation of the algal liquor with Actinobacillus succinogenes 130Z, we achieved maximum productivity, process conversion yield, and titer of 1.1 g L-1 h-1, 0.7 g g-1 total sugars, and 30.5 g L-1 respectively. Succinic acid was recovered from fermentation media with a yield of 60% at 98.4% purity while lipids were recovered from the flocculated cake at 83% yield with subsequent conversion through deoxygenation and hydroisomerization to a renewable diesel blendstock. This work is a first-of-its-kind demonstration of a novel integrated conversion process for algal biomass to produce fuel and chemical products of sufficient quality to be blend-ready feedstocks for further processing.

09 BIOMASS FUELS↗

Identification of major matrix metalloproteinase-20 proteolytic processing products of murine amelogenin and tyrosine-rich amelogenin peptide using a nuclear magnetic resonance spectroscopy based method

Objective: The aim of this study was to identify major matrix metalloproteinase-20 (MMP20) proteolytic processing products of amelogenin over time and determine if the tyrosine-rich amelogenin peptide (TRAP) was a substrate of MMP20. Design: Recombinant 15N-labeled murine amelogenin and 13C,15N-labeled TRAP were incubated with MMP20 under conditions where amelogenin self-assembles into nanospheres. Digestion products were fractionated by reverse-phase high-performance liquid chromatography at various time points. Product identification took advantage of the intrinsic disorder property of amelogenin that results in little change to its fingerprint 1H-15N heteronuclear single-quantum coherence nuclear magnetic resonance spectrum in 2% acetic acid upon removing parts of the protein, allowing cleavage site identification by observing which amide cross peaks disappear. Results: The primary product in five out of the six major reverse-phase high-performance liquid chromatography bands generated after a 24 hour incubation of murine amelogenin with MMP20 were: S55-L163, P2-L147, P2-E162, P2-A167, and P2-R176. After 72 hours these products were replaced with five major reverse-phase high-performance liquid chromatography bands containing: L46-A170, P2-S152, P2-F151, P2-W45, and short N-terminal peptides. TRAP was completely digested by MMP20 into multiple small peptides with the initial primary site of cleavage between S16 and Y17. Conclusions: Identification of the major MMP20 proteolytic products of amelogenin confirm a dynamic process, with sites towards the C-terminus more rapidly attacked than sites near the N-terminus. This observation is consistent with nanosphere models where the C-terminus is exposed and the N-terminus more protected. One previously reported end-product of the MMP20 proteolytic processing of amelogenin, TRAP, is shown to be an in vitro substrate for MMP20.

amelogenesis imperfecta, protease, amelogenin, ena↗

Process Dependent Sivers Function and Implication for Single Spin Asymmetry in Inclusive Hadron Production

We study the single transverse spin asymmetries in the single inclusive particle production within the framework of the generalized parton model (GPM). By carefully analyzing the initial- and final-state interactions, we include the process-dependence of the Sivers functions into the GPM formalism. The modified GPM formalism has a close connection with the collinear twist-3 approach. Within the new formalism, we make predictions for inclusive {pi}{sup 0} and direct photon productions at RHIC energies. We find the predictions are opposite to those in the conventional GPM approach.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Modeling of Synfuel Production Process: ASPEN Model of FT production with electricity demand provided at LWR scale

Synfuels, or electro-fuels (e-fuels) have the unique potential to significantly reduce greenhouse gas (GHG) emissions across the transportation sector. This is especially true for applications with substantial payloads and daily miles traveled, such as long-haul heavy-duty vehicles, rail locomotives, marine vessels and aviation aircrafts that are challenging to directly electrify via battery or fuel cell powertrain technologies. Synfuels, or electro-diesel/electro-jet fuels, have similar properties with the incumbent petroleum fuels, compatible with current infrastructure but have much lower GHG emissions relative to the petroleum counterpart, because they utilize waste carbon dioxide (CO2) streams and green hydrogen (H2) sourced from electrolysis. To achieve substantial reductions in GHG emissions, electricity sources must be zero carbon or near-zero carbon, which is the case with solar, wind, hydro and nuclear power. Compared to the intermittency of solar, wind and hydro, nuclear energy provides a steady energy source. In addition, it’s advantageous for nuclear power to produce synfuels because it provides not only near-zero carbon electricity to displace grid electricity, but also near-zero carbon steam to displace carbon-intensive natural gas combustion for steam generation. The availability of electricity and steam also enables more efficient green hydrogen production by using high-temperature electrolysis. In this work, Argonne National Laboratory (ANL) models a synfuel production process via the Fischer- Tropsch (FT) reaction by using nuclear power to provide electricity and steam. In 2021, using ASPEN Plus software, ANL established a detailed process model of a stand-alone FT production facility, assuming feedstocks of pure CO2 and H2. This stand-alone model can be expanded to integrate H2 production from nuclear power via low-temperature and high-temperature electrolysis at light-water reactor (LWR) scale. This report summarizes the stand-alone ASPEN Plus model results with a detailed mass and energy analysis. Our modeled facility produces 351 MT/day (130,000 gal/day) of FT fuel (a mixture of naphtha, jet fuel, and diesel) by converting 223 MT/day of H2 and 2,387 MT/day of CO2. The FT fuel production energy efficiency is 58% and the carbon conversion efficiency (from CO2 to FT fuel) is 46%. The production of green hydrogen requires 390–470 MWe of electricity, which is compared with the capacity of an LWR plant. For the stand-alone FT process, the detailed energy demand (electricity and heat) is summarized in the table below. Based on the energy supply source and the required temperature, potential insertion points of nuclear energy are identified. Based on the potential nuclear energy utilization, this report discusses potential modification options for expanding the system boundary to integrate nuclear power use, for example on-site hydrogen production via water electrolysis. Modeling of the integrated system is conducted by closely working with ANL and Idaho National Laboratory (INL) collaborators to harmonize design parameters of nuclear plants and the FT production process.

Zang, Guiyan↗

Search for Polarization Effects in the Antiproton Production Process

For the production of a polarized antiproton beam, various methods have been suggested including the possibility that antiprotons may be produced polarized which will be checked experimentally. The polarization of antiprotons produced under typical conditions for antiproton beam preparation will be measured at the CERN/PS. If the production process creates some polarization, a polarized antiproton beam could be prepared by a rather simple modification of the antiproton beam facility. The detection setup and the expected experimental conditions are described.

43 PARTICLE ACCELERATORS↗

Chemical evolution of {sup 244}Pu in the solar vicinity and its implications for the properties of r-process production

Meteoritic abundances of r-process elements are analyzed to deduce the history of chemical enrichment by the r-process, from the beginning of disk formation to the present time in the solar vicinity. Our analysis combines the abundance information from short-lived radioactive nuclei such as {sup 244}Pu with the abundance information from stable r-process nuclei such as Eu. These two types of nuclei can be associated with one r-process event and an accumulation of events until the formation of the solar system, respectively. With the help of the observed local star formation (SF) history, we deduce the chemical evolution of {sup 244}Pu and obtain three main results: (i) the last r-process event occurred 130–140 Myr before the formation of the solar system; (ii) the present-day low {sup 244}Pu abundance as measured in deep-sea reservoirs results from the low recent SF rate compared to ∼4.5−5 Gyr ago; and (iii) there were ∼15 r-process events in the solar vicinity from the formation of the Galaxy to the time of solar system’s formation and ∼30 r-process events to the present time. Then, adopting the hypothesis that a neutron star (NS) merger is the r-process production site, we find that the ejected r-process elements are extensively spread out and mixed with interstellar matter, with a mass of ∼3.5×10{sup 6} M{sub ⊙}, which is about 100 times larger than that for supernova ejecta. In addition, the event frequency of r-process production is estimated to be 1 per ∼1400 core-collapse supernovae, which is identical to the frequency of NS mergers estimated from the analysis of stellar abundances.

79 ASTRONOMY AND ASTROPHYSICS↗

Studies of the use of heat from high temperature nuclear sources for hydrogen production processes

Future uses of hydrogen and hydrogen production processes that can meet the demand for hydrogen in the coming decades were considered. To do this, a projection was made of the market for hydrogen through the year 2000. Four hydrogen production processes were selected, from among water electrolysis, fossil based and thermochemical water decomposition systems, and evaluated, using a consistent set of ground rules, in terms of relative performance, economics, resource requirements, and technology status.

Farbman, G. H.↗

Pre- and Post-Production Processes Increasingly Dominate Greenhouse Gas Emissions From Agri-Food Systems

We present results from the FAOSTAT emissions shares database, covering emissions from agri-food systems and their shares to total anthropogenic emissions for 196 countries and 40 territories for the period 1990–2019. We find that in 2019, global agri-food system emissions were 16.5 (95 %; CI range: 11–22) billion metric tonnes (GtCO2 eq. yr(exp -1)), corresponding to 31%(range: 19 %–43 %) of total anthropogenic emissions. Of the agri-food system total, global emissions within the farm gate – from crop and livestock production processes including on-farm energy use – were 7.2 GtCO2 eq. yr(exp -1); emissions from land use change, due to deforestation and peatland degradation, were 3.5 GtCO2 eq. yr(exp -1); and emissions from pre- and post-production processes – manufacturing of fertilizers, food processing, packaging, transport, retail, household consumption and food waste disposal – were 5.8 GtCO2 eq. yr(exp -1). Over the study period 1990–2019, agri-food system emissions increased in total by 17 %, largely driven by a doubling of emissions from pre- and post-production processes. Conversely, the FAOSTAT data show that since 1990 land use emissions decreased by 25 %, while emissions within the farm gate increased 9 %. In 2019, in terms of individual greenhouse gases (GHGs), pre- and postproduction processes emitted the most CO2 (3.9 GtCO2 yr(exp -1)), preceding land use change (3.3 GtCO2 yr(exp -1)) and farm gate (1.2 GtCO2 yr(exp -1)) emissions. Conversely, farm gate activities were by far the major emitter of methane (140 MtCH4 yr(exp -1)) and of nitrous oxide (7.8 MtN2Oyr(exp -1)). Pre- and post-production processes were also significant emitters of methane (49 MtCH4 yr(exp -1)), mostly generated from the decay of solid food waste in landfills and open dumps. One key trend over the 30-year period since 1990 highlighted by our analysis is the increasingly important role of food-related emissions generated outside of agricultural land, in pre- and post-production processes along the agri-food system, at global, regional and national scales. In fact, our data show that by 2019, pre- and post-production processes had overtaken farm gate processes to become the largest GHG component of agri-food system emissions in Annex I parties (2.2 GtCO2 eq. yr(exp -1)). They also more than doubled in non-Annex I parties (to 3.5 GtCO2 eq. yr(exp -1)), becoming larger than emissions from land use change. By 2019 food supply chains had become the largest agri-food system component in China (1100 MtCO2 eq. yr(exp -1)), the USA (700 MtCO2 eq. yr(exp -1)) and the EU-27 (600 MtCO2 eq. yr(exp -1)). This has important repercussions for food-relevant national mitigation strategies, considering that until recently these have focused mainly on reductions of non-CO2 gases within the farm gate and on CO2 mitigation from land use change. The information used in this work is available as open data with DOI https://doi.org/10.5281/zenodo.5615082 (Tubiello et al., 2021d). It is also available to users via the FAOSTAT database (https://www.fao.org/faostat/en/#data/EM; FAO, 2021a), with annual updates.

FAOSTAT agri-food systems emissions database↗

Experimental study of the space-time development of the particle production process in hadron-nucleon collisions, using massive target nucleus as a detector

Experimental study of the space-time development of the particle production process in hadronic collisions at its initial stage was performed. Massive target nuclei have been used as fine detectors of properties of the particle production process development within time intervals smaller than 10 to the 22nd power s and spatial distances smaller than 10 to the 12th power cm. In hadron-nucleon collisions, in particular in nucleon-nucleon collisions, the particle production process goes through intermediate objects in 2 yields 2 type endoergic reactions. The objects decay into commonly observed resonances and paricles.

Strugalski, Z.↗

The Modeling of the Synfuel Production Process: Process models of Fischer-Tropsch production with electricity and hydrogen provided by various scales of nuclear plants

Synthetic fuels (synfuels), also known as electro-fuels (E-fuels), are hydrocarbon fuels produced from waste CO2 streams and water electrolysis, with electricity as the primary source of energy. To achieve substantial reductions in greenhouse gas (GHG) emissions, electricity sources must release zero carbon or near-zero carbon, as is the case with solar, wind, hydro, and nuclear power. Nuclear power is one of the largest and steadiest domestic sources of clean energy in the United States. Moreover, nuclear power has the potential to produce hydrogen economically for less than $2/kg, reaching the DOE near-term target price. Thus, using nuclear power to produce synfuels has the unique potential to significantly reduce the GHG emissions of hydrocarbon fuels production and end-use applications. Fisher-Tropsch or FT fuel (a mixture of naphtha, jet fuel, and diesel) is of great interest because it is a drop-in fuel that can be blended with conventional petroleum counterparts and is compatible with existing infrastructure. By using the ASPEN Plus model, this report develops FT fuel production models on three scales, corresponding to nuclear plants with capacities of 1000 MWe, 437 Mwe, and 100 MWe, respectively. The FT model case with energy from a 437-MWe nuclear plant is used as a baseline case. This report summarizes the baseline ASPEN Plus model results with a detailed mass and energy analysis. Our modeled facility produces 507 MT/day (185,000 gal/day) of FT fuel by converting 255 MT/day of hydrogen and 1,580 MT/day of CO2. The FT fuel production energy efficiency from hydrogen and electricity energy inputs is 70% (lowerheating-value or LHV-based). Including the high-temperature electrolyzer in the system boundary, the FT fuel production LHV efficiency from electricity and thermal energy inputs is 51%, considering 39.8 kWh/kg of electricity and 6.86 kWh/kg of thermal energy use from a nuclear plant for hydrogen production. The FT production efficiency can potentially be increased by further integrating the heat exchange between nuclear plant and FT process, and this study is underway. The carbon conversion ratio in the baseline case is 99%, with process CO2 capture and recirculation and oxy-combustion using the oxygen by-product from water electrolysis. The hydrogen consumption is 1.38 kg/gal-FT fuel and the CO2 consumption is 8.56 kg/gal-FT fuel in the baseline case. With different FT production scales determined by the nuclear plant capacity, the FT model was scaled using the same operating parameters, which led to the same conversion efficiency regardless of scale. However, the different FT plant scales will impact the economics of FT fuel production; this impact will be examined in the next phase of this study.

Zang, Guiyan↗

CRITICAL REVIEW OF N, N{sup +}, N{sup +} {sub 2}, N{sup ++}, And N{sup ++} {sub 2} MAIN PRODUCTION PROCESSES AND REACTIONS OF RELEVANCE TO TITAN'S ATMOSPHERE

This paper is a detailed critical review of the production processes and reactions of N, N{sup +}, N{sup +} {sub 2}, N{sup ++}, and N{sup ++} {sub 2} of relevance to Titan's atmosphere. The review includes neutral, ion-molecule, and recombination reactions. The review covers all possible active nitrogen species under Titan's atmospheric conditions, specifically N{sub 2} (A {sup 3}{Sigma}{sup +} {sub u}), N ({sup 4} S), N ({sup 2} D), N ({sup 2} P), N{sup +} {sub 2}, N{sup +} ({sup 3} P), N{sup +} ({sup 1} D), N{sup ++} {sub 2}, and N{sup ++} species, and includes a critical survey of the reactions of N, N{sup +}, N{sup +} {sub 2}, N{sup ++}, and N{sup ++} {sub 2} with N{sub 2}, H{sub 2}, D{sub 2}, CH{sub 4}, C{sub 2}H{sub 2}, C{sub 2}H{sub 4}, C{sub 2}H{sub 6}, C{sub 3}H{sub 8} and the deuterated hydrocarbon analogs, as well as the recombination reactions of N{sup +} {sub 2}, N{sup +}, N{sup ++} {sub 2}, and N{sup ++}. Production processes, lifetimes, and quenching by collisions with N{sub 2} of all reactant species are reviewed. The N ({sup 4} S) state is reactive with radicals and its reactions with CH{sub 2}, CH{sub 3}, C{sub 2}H{sub 3}, and C{sub 2}H{sub 5} are reviewed. Metastable states N{sub 2} (A {sup 3}{Sigma}{sup +} {sub u}), N ({sup 2} D), and N ({sup 2} P) are either reactive or quenched by collisions with the target molecules reviewed. The reactions of N{sup +} ({sup 1} D) have similar rate constants as N{sup +} ({sup 3} P), but the product branching ratios differ significantly. Temperature effects and the role of the kinetic energy content of reactants are investigated. In all cases, experimental uncertainties of laboratory data are reported or estimated. Recommended values with uncertainties, or estimated values when no data are available, are given for rate constants and product branching ratios at 300 K and at the atmospheric temperature range of Titan (150-200 K for neutral reactions and 150 K for ion reactions).

79 ASTRONOMY AND ASTROPHYSICS↗

Savannah River Site HB-Line Plutonium Oxide Production Process Simulation Model - 17458

The AFS II/Plutonium Oxide Production process is in its initial operational phase at the Savannah River Site's (SRS) HB-Line. The process is new for the facility where it is being performed, but the facility itself has been in use on and off for over 50 years. Beginning this process inside the facility has resulted in multiple process delays, due to both equipment issues and process restrictions. In order to better understand the process and to identify ways to improve facility performance, Savannah River Nuclear Solutions (SRNS), in conjuncture with Newport News Shipbuilding (NNS), developed the HB-Line Process Simulation Model. This tool completely replicates the operations that comprise the HB-Line process and simulates all of the constraints associated with the process. The model realistically accounts for the number of personnel required for a process step, the time required for a process step to occur, rules related to the parallel operation of process steps, and realistic equipment and operational delay data. The result is a tool that allows SRNS to test different scenarios for improving the process throughput, while realistically accounting for potential process delays and restrictions. The tool is currently in use and has allowed SRNS to present to their customer, the National Nuclear Security Administration (NNSA), estimated production capabilities over wide-ranging timetables and assumptions. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Production processing and workflow management software evaluation in the DUNE collaboration

The Deep Underground Neutrino Experiment (DUNE) will be theworld’s foremost neutrino detector when it begins taking data in the mid-2020s.Two prototype detectors, collectively known as ProtoDUNE, have begun tak-ing data at CERN and have accumulated over 3 PB of raw and reconstructeddata since September 2018. Particle interaction within liquid argon time projec-tion chambers are challenging to reconstruct, and the collaboration has set upa dedicated Production Processing group to perform centralized reconstructionof the large ProtoDUNE datasets as well as to generate large-scale Monte Carlosimulation. Part of the production infrastructure includes workflow manage-ment software and monitoring tools that are necessary to eciently submit andmonitor the large and diverse set of jobs needed to meet the experiment’s goals.We will give a brief overview of DUNE and ProtoDUNE, describe the varioustypes of jobs within the Production Processing group’s purview, and discuss thesoftware and workflow management strategies are currently in place to meetexisting demand. We will conclude with a description of our requirements in aworkflow management software solution and our planned evaluation process.

Herner, Kenneth R.↗

Techno-economic analysis of a conceptual biofuel production process from bioethylene produced by photosynthetic recombinant cyanobacteria

Ethylene is a petrochemical produced in large volumes worldwide. It serves as a building block for a wide variety of plastics, textiles, and chemicals, and can be converted into liquid transportation fuels. There is great interest in the development of technologies that produce ethylene from renewable resources, such as biologically derived CO 2 and biomass. One of the metabolic pathways used by microbes to produce ethylene is via an ethylene-forming enzyme (EFE). By expressing a bacterial EFE gene in a cyanobacterium, ethylene has been produced through photosynthetic carbon fixation. Here, we present a conceptual design and techno-economic analysis of a process of biofuel production based on the upgradation of ethylene generated by the recombinant cyanobacterium. This analysis focuses on potential near-term to long-term cost projections for the integrated process of renewable fuels derived from ethylene. The cost projections are important in showing the potential of this technology and determining research thrusts needed to reach target goals. The base case for this analysis is a midterm projection using tubular photobioreactors for cyanobacterial growth and ethylene production, cryogenic distillation for ethylene separation and purification, a two-step Ziegler oligomerization process with subsequent hydrotreatment and upgradation for fuel production, and a wastewater treatment process that utilizes anaerobic digestion of cyanobacterial biomass. The minimum fuel selling price (MFSP) for the midterm projection is 15.07 per gallon gasoline equivalent (GGE). Near-term and long-term projections are 28.66 per GGE and 5.36 per GGE, respectively. Single- and multi-point sensitivity analyses are conducted to determine the relative effect that chosen variables could have on the overall costs. This analysis identifies several key variables for improving the overall process economics and outlines strategies to guide future research directions. Finally, the productivity of ethylene has the largest effect on cost and is calculated based on a number of variables that are incorporated into this cost model (i.e., quantum requirement, photon transmission efficiency, and the percent of energy going to either ethylene or cyanobacterial biomass production).

09 BIOMASS FUELS↗

Extracting Silicon From Sodium-Process Products

New acid leaching process purifies silicon produced in reaction between silicon fluoride and sodium. Concentration of sodium fluoride and other impurities and byproducts remaining in silicon are within acceptable ranges for semi-conductor devices. Leaching process makes sodium reduction process more attractive for making large quantities of silicon for solar cells.

Kapur, V.↗