Search NASA⌕ Search

SEARCH · Search NASA

Results for “pulse position modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Photonic generation of millimeter-wave ultra-wideband monocycle signal using up-conversion based on stimulated Brillouin scattering effect

We propose a novel scheme for photonic generation of millimeter-wave (MMW) ultra-wideband monocycle signal free of strong local oscillation (LO) and low-frequency component. A theory and a mathematical model are built to investigate the proposed scheme. Firstly, a differentiator is implemented using a dual-drive Mach–Zehnder modulator to attain monocycle pulses by differentiating a series of Gauss pulses. Subsequently, a dual-parallel Mach–Zehnder modulator and stimulated Brillouin scattering effect are employed to realize single-sideband modulation for up-converting the monocycle pulses to the MMW band. In the calculation, the generated signal is centered at 26 GHz with 10-dB bandwidth of 7 GHz and its power efficiency is about 50.08%. In addition, on–off keying modulation, amplitude modulation (PAM) and pulse position modulation monocycle pulses are generated. The spectrum of the generated signal meets with the FCC mask efficiently, so this technique has a potential application in MMW radar communication systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Power distribution and BER in indoor VLC with PPM based modulation schemes: a comparative study

Visible light communication (VLC) uses an intensity-modulation and direct-detection scheme to transmit data. The light source utilized in VLC structures is constantly switched on and off rapidly, resulting in flickering. Furthermore, most of illumination systems exclude dimming support to permit customers to dim the light source to the desired stage. Therefore, the modulation scheme for information transmission in VLC should consist of flicker mitigation and dimming manage abilities. Double inverse pulse position modulation (DIPPM), sub-carrier pulse position modulation (SC-L-PPM), and M-ary variable pulse position modulation (M-VPPM) are recommended for minimizing the flicker issues and supporting an excessive degree of dimming for VLC systems. In this paper, a comparison is introduced between DIPPM, SC-L-PPM, and M-VPPM according to error performance and bit rate. In addition, a simulation is carried out to measure the optical power distribution for a LED lamp in an indoor room topology for each modulation technique. The obtained results indicated that SC-L-PPM is the best choice regarding the bit error rate (BER) and optical power distribution compared to the other two schemes. A 10{sup −6} BER is achieved with a very low power requirement at L = 8, while a remarkable power distribution of 1.5–6.5 dBm is observed from 3 × 5 × 5 m{sup 3} room corners to the center, respectively. According to the bit rate, it is noticed that, M-VPPM is the most efficient one compared to the two other schemes. It achieves 2.3 × 10{sup 7} bps at a signal to noise ratio (SNR) of 22 dB and M = 8.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

An efficient hybrid visible light communication/radio frequency system for vehicular applications

This paper focuses on improving the traffic system for Intelligent Transportation System (ITS) by using an imaging receiver instead of photodiode as a single receiver. Here, two simple traffic models have been proposed and analyzed in order to optimize the design characteristics such as signal to noise ratio, required power, received information, bit error rate, and modulation technique. First, a standalone visible light communication (VLC) with different modulation techniques is considered. The On–OFF Keying, L-Pulse Position Modulation (L-PPM), and Inverse L-Pulse Position Modulation (I-L-PPM) are investigated. Then, a hybrid communication system utilizing VLC and radio frequency (RF) is proposed for position-based services. The VLC/RF system combines the benefits of both systems and offers long distance transmission which is an important concern in ITS and in order to improve the link reliability in infrastructure to vehicle communications. This means that the probability of having a communication link between the transmitter and receiver is maintained without interruption. Then, the performance is finally evaluated. The obtained simulation results show a considerable increase in the received information using the proposed hybrid VLC/RF system compared to a VLC system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Multi-rate OCDMA system BER performance evaluations for different ML-code sequences

This paper analyzes Bit Error Rate (BER) of Optical Code Division Multiple Access (OCDMA) networks for different class of services which are data, voice, and video; whereas Multi-Length Weighted Modified Prime Code (ML-WMPC) sequences are utilized as a spreading code in with respect to previously used ML-Optical Orthogonal codes. Due to variations in bit rates between the mentioned services, each of them assigns a different WMPC sequence length. In addition, the shot noise, thermal noise, and the Multiple Access Interference (MAI) are included and considered as sources of noise in the BER performance analysis. Furthermore, Pulse Position Modulation, Manchester encoding and MAI cancellation (MAIC) technique are utilized to improve the network performance at a higher number of active users. For analysis, the BER performance calculations are investigated for three types of OCDMA receivers such as simple receiver, receiver with MAIC technique, and receiver with MAIC and Manchester encoding. Moreover, the BER mathematical models have been introduced for different bit rates according to the type of service in the presence of the ML-WMPC and the last of three mentioned OCDMA receivers. Finally, these models and their results are compared with the other existing models, where the results show an improvement in BER performance in the proposed approach.

42 ENGINEERING↗
DOE OSTI2022

Carrier and sampling frequency offset estimation for RF communication with crystal-less nodes

When the ultra-low power mm-scale sensor node does not have a crystal oscillator and phase-lock loop, it inevitably exhibits significant carrier frequency offset (CFO) and sampling frequency offset (SFO) with respect to the reference frequencies in the gateway. This disclosure enables efficient real-time calculation of accurate SFO and CFO at the gateway, thus the ultra-low power mm-scale sensor node can be realized without a costly and bulky clock reference crystal and also power-hungry phase lock loop. In the proposed system, the crystal-less sensor starts transmission with repetitive RF pulses with a constant interval, followed by the data payload using pulse-position modulation (PPM). A proposed algorithm uses a two-dimensional (2D) fast Fourier transform (FFT) based process that identifies the SFO and CFO at the same time to establish successful wireless communication between the gateway and crystal-less sensor nodes.

Kim, Hun-Seok↗
DOE OSTI2021

A position and pulse shape discriminant p -terphenyl detector module

We present the development of a neutron detector array module made with para-terphenyl, a bright, fast, n/γ discriminating crystalline organic scintillator. The module is comprised of 2 cm × 2 cm × 2 cm p-terphenyl crystals that have been optically coupled together to create a pseudo-bar module. While only relying on two photo detectors, the module is capable of distinguishing interactions between up to eight crystals. Furthermore, the module retains the p-terphenyl’s pulse shape discrimination (PSD) capability. Together this makes the pseudo-bar module a promising position-sensitive neutron detector. Here we present characteristics of the pseudo-bar module - its timing resolution as well as its pulse shape and position discrimination capabilities, and briefly discuss future plans for utilizing an array of pseudo-bar modules in a useful neutron detector system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Higher-order dispersion compensating pulse shaper via amplitude spectral filtering and nonlinear phase accumulation

A method of pulse shaping using spectral filtering, positive chirp, and self-phase modulation to control the accumulated higher-order phase terms of the spectral phase. This pulse shaping method has particular advantage in fiber chirped pulse amplification (FCPA) systems, where there are two effects: (1) an offsetting of the fourth order phase via nonlinear phase accumulation, allowing for a higher Strehl ratio (i.e., a cleaner pulse), higher peak power pulse and (2) enabling power scaling to higher pulse energies without the increased nonlinear phase accumulation leading to pulse breakup. This technique can be used both in a passive system with no amplification to clean up an existing pulse, and in an amplifier system to enable higher performance operation (shorter pulses, cleaner pulses, higher energy pulses).

Domingue, Scott R.↗
DOE OSTI2018

Nonlinear discrete wavefront shaping for spatiotemporal pulse compression with multicore fibers

Here in this work, we apply an effective discrete phase front focusing method to control the coherent combining and temporal compression of laser pulses by means of nonlinear multicore fibers. We numerically demonstrate the possibility of combining almost entirely the input optical pulses injected in all cores, into the central core of a hexagonal lattice multicore fiber. We investigate the optimal operational conditions for the most effective pulse combining and analyze the influence of a positive input pulse temporal chirp and spatial phase modulation. We demonstrate that a pulse, which has been focused into an arbitrary core of the fiber, also undergoes temporal compression.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Wide-Bandgap Semiconductor Amplifiers for Fusion Plasma Heating and Control

This paper discusses power electronics developed under the ARPA-E GAMOW program to support nuclear fusion power production. The goal of this project was to develop and assess the potential for wide-bandgap (WBG) semiconductor devices in power electronics to enable high-efficiency and high-voltage solid-state systems for fusion plasma generation, heating, and control. The power electronics use an architecture in which multiple high-power boards can be combined to produce megawatt-level power, where using multiple boards provides high reliability. Two main areas of power electronics boards are developed in this project for fusion plasma heating and control applications: (1) pulse generation and control and (2) radiofrequency generation. The first area is for boards capable of driving high-voltage millisecond pulses at high duty cycles. The envisioned application of these pulses is in plasma control of magnetohydrodynamic instabilities, plasma position, and edge-localized modes. Pulse-width modulation allows for the implementation of a wide variety of linear and nonlinear control systems. The boards developed for this project could actuate control coils based on digital input signals and can be parallelized to provide megawatts of output power. The design of the pulse generator is a low-side load switch. A load switch was designed and constructed that utilized 2-kV-rated field-effect transistor (FET)-based cascodes developed by Qorvo under this project to perform initial testing of these cascodes. The second area is being implemented using class E amplifiers with WBG devices and a reactance steering network to handle inductive or capacitive plasma loads. Applications include ion cyclotron resonance heating (ICRH) and high-harmonic fast-wave (HHFW) heating. A class E reactance steering network is demonstrated in modeling and experiment with a resistive-inductive load that models an inductively-coupled plasma. Power combining of boards with class E reactance steering networks is also simulated and demonstrated experimentally, to enable scaling up to high power. Modeling of high-power-density cooling and remaining useful life is conducted to enable reliable, effectively cooled high-power electronics for fusion applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2019

A prototype for SANDD: A highly-segmented pulse-shape-sensitive plastic scintillator detector incorporating silicon photomultiplier arrays

We report the first clear observation of neutron/gamma-ray pulse-shape sensitivity of a fully-instrumented 8 × 8 array of plastic scintillator segments coupled to two 5 cm × 5 cm 64-channel SiPM arrays as part of a study of the key metrics of a prototype antineutrino detector module designed for directional sensitivity. SANDD (a Segmented AntiNeutrino Directional Detector) will eventually comprise a central module of 64 elongated segments of 6 Li-doped pulse-shape-sensitive scintillator rods, each with a square cross section of 5.4 mm × 5.4 mm, surrounded by larger cross section bars of the same material. The most important metrics with the potential to impact the performance of the central module of SANDD are neutron and gammaray pulse-shape sensitivity using silicon photomultipliers (SiPMs), particle identification via scintillator rod multiplicity, and energy and position resolution. As a first step, we constructed a prototype detector to investigate the performance of a central SANDD-like module using two 64-channel SiPM arrays and rods of undoped pulse-shape-sensitive plastic scintillator.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Interference effects in the formation of the light bullet spectrum under axicon focusing

Specific features of the anti-Stokes band of the light bullet supercontinuum spectrum under filamentation of 1900-nm femtosecond pulses, focused by an axicon in fused silica and calcium fluoride, have been experimentally, numerically, and analytically investigated. It is found that the formation of two or more light bullets in a filament leads to modulation of spectral components’ intensity. The oscillation period of spectral components, defined as the wavelength interval between adjacent intensity minima, decreases with decreasing their wavelength. On a logarithmic scale, the relative change in the oscillation period in the spectrum is proportional to the spectral component wavelength and is independent of the pulse energy and the position of the light bullet formation region in the filament. It is established that the modulation in the spectrum is due to the interference of the broadband supercontinuum emitted by light bullets, and its period decreases with increasing interval between them. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Intrinsic optical bistability of photon avalanching nanocrystals

Optically bistable materials respond to a single input with two possible optical outputs, contingent on excitation history. Such materials would be ideal for optical switching and memory, but the limited understanding of intrinsic optical bistability (IOB) prevents the development of nanoscale IOB materials suitable for devices. Here we demonstrate IOB in Nd 3+ -doped KPb 2 Cl 5 avalanching nanoparticles, which switch with high contrast between luminescent and non-luminescent states, with hysteresis characteristic of bistability. Here we elucidate a non-thermal mechanism in which IOB originates from suppressed non-radiative relaxation in Nd 3+ ions and from the positive feedback of photon avalanching, resulting in extreme, >200th-order optical nonlinearities. The modulation of laser pulsing tunes the hysteresis widths, and dual-laser excitation enables transistor-like optical switching. This control over nanoscale IOB establishes avalanching nanoparticles for photonic devices in which light is used to manipulate light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Lasing dynamics of diode-pumped Yb – Er laser with a passive Q switch exposed to high-power external light

The temporal dynamics of diode-side-pumped Yb – Er laser, with a passive Co{sup 2+} : MgAl{sub 2}O{sub 4} Q switch illuminated by a light beam (total fluence of 0.15 – 0.16 J cm{sup −2}) from a semiconductor pulsed module, is investigated. It is shown that, using this external illumination, one can change the lasing onset delay and the time jitter ΔT{sub gi}. The dependence of ΔT{sub gi} on the interval between the instant of switching the illumination module on and the lasing peak position t{sub i} has a minimum at |t{sub i}| ≈ 10 μs. The decrease in ΔT{sub gi} with a change in |t{sub i}| from 90 to 10 μs indicates that instant of lasing peak occurrence for the Yb – Er laser is partially controlled by the pulse from the highly stable semiconductor module. If |t{sub i}| < 10 μs, the enhanced luminescence fluence in the cavity of Yb – Er laser exceeds 0.16 J cm{sup −2}; the light beam from the module does not affect much the lasing process in the ytterbium – erbium laser; and, as a consequence, the time jitter recovers the initial value. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Nearly monoenergetic positive ion beam with self-neutralized space charge extracted from a pulsed plasma

Not provided.A nearly monoenergetic Ar + ion beam (100 eV peak energy, 3.5 eV full width at half maximum), with self-neutralized space charge, was extracted from a power modulated (pulsed) inductively coupled plasma (ICP), through a single grounded grid. The beam energy was set by applying a synchronous DC bias voltage to a boundary electrode in contact with the plasma, in the late afterglow of the power pulse. A retarding field energy analyzer and a movable Faraday cup were used to measure the ion energy distribution (IED) and the time resolved ion and electron current densities, as a function of position along the beam axis, to unravel the mechanism of self-neutralization of the space charge of the beam. When a +100 V DC bias was applied to the boundary electrode during the afterglow, a ~100 eV beam (ion density ~10 9 cm -3 ) emerged that was space-charge neutralized by periodic injection of electrons, mainly during the early afterglow, into the region downstream of the extraction grid. A background plasma (electron density ~10 10 cm -3 ) was formed by these electrons, in conjunction with relatively low-energy ions (1–10 eV) that flew out of the ICP when the DC bias was off, as well as formed by resonant charge exchange of the 100 eV beam ions with the background Ar in the downstream region near the extraction grid. The behavior of the beam IED as a function of pressure and power of the ICP as well as the timing of application of the DC bias voltage was also studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Complete spectroscopy in the attosecond regime

Harnessing light waveforms at attosecond time scales provides information of the structure and dynamics of matter on it's natural time scales. For this reason attosecond metrology has been at the forefront of the optical sciences for more than a decade, and it represents the latest time-domain frontier of the quantum world. Attosecond light pulses are commonly generated using higher-order harmonic generation (HHG) , a process capable of generating XUV coherent pulses. In addition to generate attosecond pulses, HHG can be used to study the structure and dynamics of atoms and molecules by analyzing the spectral content of the XUV pulses. This approach is known as HHG spectroscopy and it provides a coherent, time-dependent approach to study structure and dynamics in the quantum world. In this proposal we will generate harmonics from two optical foci produced by a system of a two-dimensional spatial light modulator (SLM) and a lens. In the far eld the train of attosecond pulses will interfere creating harmonic-dependent fringes. The position of such fringes is a direct measurement of the relative phase between the two foci and they also carry information about the quantum state of the target atom or molecule. Therefore, by measuring the amplitude and relative phase of the emitted harmonics we will have access to both, the amplitude and phase of the dipole moments of the studied target. Because the two beams are completely indistinguishable from each other up to a few millimeters from the focus, both driving pulses share the exact beam path. So far we have measured a jitter of 700 zeptoseconds with a 12.5 attosecond resolution in the delay control of the two foci. These two time scales represent some of the best time controls ever achieved to date.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

In-orbit operation of Resolve Filter Wheel and modulated X-ray source

The Resolve soft X-ray spectrometer is a high spectral resolution microcalorimeter spectrometer for the X-ray Imaging and Spectroscopy Mission. In the beam of Resolve, there is a filter wheel containing X-ray filters. In the beam, there is also an active calibration source, the modulated X-ray source (MXS), which can provide pulsed X-rays to facilitate gain calibration. The filter wheel consists of six filter positions. Two open positions, one 55 Fe source to aid in spectrometer characterization during the commissioning phase, and three transmission filters: a neutral density filter, an optical blocking filter, and a beryllium filter. The X-ray intensity, pulse period, and pulse separation of an MXS are highly configurable. Furthermore, the switch-on time is synchronized with the spacecraft’s internal clock to give accurate start and end times of the pulses. One of the issues raised during ground testing was the susceptibility of an MXS at high voltage to ambient light. Although measures were taken to mitigate the light leak, the efficacy of those measures must be verified in orbit. Along with an overview of issues raised during ground testing, we will discuss the calibration source and the filter performance in-flight and compare with the transmission curves present in the Resolve calibration database.

X-ray Imaging and Spectroscopy Mission/Resolve↗
DOE OSTI2024

Optical encoder devices and systems

Devices, systems and methods for encoding information using optical components are described. An example photonic filtered sampler includes a spectral shaper configured to receive an optical pulse train, a dispersive element positioned to receive an output of the spectral shaper and to expand spectral contents thereof in time, and a modulator configured to receive an output of the dispersive element and a radio frequency (RF) signal, and to produce a modulated output optical signal in accordance with the RF signal. In this configuration, one or more characteristics of the modulated output optical signal is determined based on a spectral shape provided by the spectral shaper and dispersive properties of the dispersive element.

Buckley, Brandon Walter↗
DOE OSTI2019

System for fracturing an underground geologic formation

An explosive system for fracturing an underground geologic formation adjacent to a wellbore can comprise a plurality of explosive units comprising an explosive material contained within the casing, and detonation control modules electrically coupled to the plurality of explosive units and configured to cause a power pulse to be transmitted to at least one detonator of at least one of the plurality of explosive units for detonation of the explosive material. The explosive units are configured to be positioned within a wellbore in spaced apart positions relative to one another along a string with the detonation control modules positioned adjacent to the plurality of explosive units in the wellbore, such that the axial positions of the explosive units relative to the wellbore are at least partially based on geologic properties of the geologic formation adjacent the wellbore.

Mace, Jonathan L.↗