Search NASA⌕ Search

SEARCH · Search NASA

Results for “pyroxenes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Cosmogenic 10 Be in pyroxene: laboratory progress, production rate systematics, and application of the 10 Be– 3 He nuclide pair in the Antarctic Dry Valleys

Here, we present cosmogenic- 10 Be and cosmogenic- 3 He data from Ferrar dolerite pyroxenes in surficial rock samples and a bedrock core from the McMurdo Dry Valleys, Antarctica, with the goal of refining the laboratory methods for extracting beryllium from pyroxene, further estimating the 10 Be production rate in pyroxene and demonstrating the applicability of 10 Be– 3 He in mafic rock. The ability to routinely measure cosmogenic 10 Be in pyroxene will open new opportunities for quantifying exposure durations and Earth surface processes in mafic rocks. We describe scalable laboratory methods for isolating beryllium from pyroxene, which include a simple hydrofluoric acid leaching procedure for removing meteoric 10 Be and the addition of a pH 8 precipitation step to reduce the cation load prior to ion exchange chromatography. 10 Be measurements in pyroxene from the surface samples have apparent 3 He exposure ages of 1–6 Myr. We estimate a spallation production rate for 10 Be in pyroxene, referenced to 3 He, of 3.6 ± 0.2 atoms g –1 yr –1 . 10 Be and 3 He measurements in the bedrock core yield initial estimates for parameters associated with 10 Be and 3 He production by negative-muon capture ($f_{10}^{*}$ = 0.00183 and $f_{3}^{*}f_{C}f_{D}$ = 0.00337). Next, we demonstrate that the 10 Be– 3 He pair in pyroxene can be used to simultaneously resolve erosion rates and exposure ages, finding that the measured cosmogenic-nuclide concentrations in our surface samples are best explained by 2–8 Myr of exposure at erosion rates of 0–35 cm Myr –1 . Finally, given the low 10 Be in our laboratory blanks (average of 5.7 × 10 3 atoms), the reported measurement precision, and our estimated production rate, it should be possible to measure 2 g samples with 10 Be concentrations of 6 × 10 4 and 1.5 × 10 4 atoms g –1 with 5 % and 15 % uncertainty, respectively. With this level of precision, Last Glacial Maximum to Late Holocene surfaces can now be dated with 10 Be in pyroxene. Application of 10 Be in pyroxene, alone or in combination with 3 He, will expand possibilities for investigating glacial histories and landscape change in mafic rock.

58 GEOSCIENCES↗
DOE OSTI2026

Cosmogenic 3 He exposure dating in mafic rocks by “Virtual mineral separation” of pyroxene

We describe a “virtual mineral separation” method for measuring the cosmogenic 3 He concentration in pyroxene in mafic rocks that consist mainly of plagioclase and pyroxene, without physically separating the minerals. This approach is significantly faster and more cost-effective than the conventional method, which requires physical separation and purification of pyroxene grains by time-consuming and labor-intensive crushing, acid cleaning, magnetic separation, HF etching, and handpicking under a microscope. The premise of the method is that helium diffusivity is much higher in plagioclase than in pyroxene, so controlled preheating of a mixed whole-rock sample can degas 3 He from plagioclase while retaining all 3 He in pyroxene. A second heating step releases all 3 He from pyroxene for measurement. To then obtain a 3 He concentration in pyroxene rather than the whole rock, we determine the pyroxene weight fraction in the sample using X-ray computed tomography (CT). A comparison of 3 He concentrations in pyroxene measured using virtual mineral separation with those measured in the same samples by physical mineral separation in previous work shows no evidence of systematic bias between the methods. Virtual mineral separation greatly simplifies the workflow for 3 He exposure-dating of mafic rocks, reduces time, effort, and cost, and permits measurements on very small samples. This enables new emerging applications of exposure dating, such as quantifying stochastic surface processes, ecosystem studies, and potential subglacial bedrock exposure dating.

Geosciences↗
DOE OSTI2024

Compositional evidence for chondrule origins of low‐Ca pyroxenes in comet Wild 2 and a giant cluster IDP

Abstract A literature compilation of 1136 low‐Ca pyroxene compositions from chondrules from 12 primitive type 2–3 carbonaceous, ordinary and enstatite chondrite groups define unique regions on an Al 2 O 3 and Cr 2 O 3 diagram when compared to low‐Ca pyroxenes from equilibrated type 4‐6 chondrites. Measured compositions of 100 low‐Ca pyroxenes from comet Wild 2 and a giant cluster IDP of probable cometary origin are similar to each other and fall in the type 2–3 chondrite chondrule region suggesting that most of the pyroxenes likely formed in the solar nebula like conventional chondrules. The data imply that most low Ca‐pyroxenes from comet Wild 2 and the giant cluster IDP formed from igneous crystallization processes and did not experience significant thermal metamorphism, indicating that the low‐Ca pyroxenes were unlikely incorporated into large parent bodies prior to accretion in their respective comet bodies. An intriguing group of nine low‐Ca pyroxenes from comet Wild 2 with low Cr and Al that fall where type 4–6 chondrites are located are interpreted as products of condensation. The compositional data combined with previously measured oxygen isotopes on 17 low‐Ca pyroxenes support earlier conclusions that comet samples have links with carbonaceous, ordinary, and possibly enstatite chondrite groups. Our results provide additional evidence that comets accreted materials from multiple chondrule reservoirs throughout the solar nebula.

Geochemistry & Geophysics↗
DOE OSTI2024

Production rate calibration for cosmogenic 10 Be in pyroxene by applying a rapid fusion method to 10 Be-saturated samples from the Transantarctic Mountains, Antarctica

Measurements of multiple cosmogenic nuclides in a single sample are valuable for various applications of cosmogenic nuclide exposure dating and allow for correcting exposure ages for surface weathering and erosion and establishing exposure–burial history. Here we provide advances in the measurement of cosmogenic 10 Be in pyroxene and constraints on the production rate that provide new opportunities for measurements of multi-nuclide systems, such as 10 Be/ 3 He, in pyroxene-bearing samples. We extracted and measured cosmogenic 10 Be in pyroxene from two sets of Ferrar Dolerite samples collected from the Transantarctic Mountains in Antarctica. One set of samples has 10 Be concentrations close to saturation, which allows for the production rate calibration of 10 Be in pyroxene by assuming production–decay equilibrium. The other set of samples, which has a more recent exposure history, is used to determine if a rapid fusion method can be successfully applied to samples with Holocene to Last Glacial Maximum exposure ages. From measured 10 Be concentrations in the near-saturation sample set we find the production rate of 10 Be in pyroxene to be 3.74 ± 0.10 atoms g -1 yr -1 , which is consistent with 10 Be/ 3 He paired nuclide ratios from samples assumed to have simple exposure. Given the high 10 Be concentration measured in this sample set, a sample mass of ~ 0.5 g of pyroxene is sufficient for the extraction of cosmogenic 10 Be from pyroxene using a rapid fusion method. However, for the set of samples that have low 10 Be concentrations, measured concentrations were higher than expected. We attribute spuriously high 10 Be concentrations to failure in removing all meteoric 10 Be and/or a highly variable and poorly quantified procedural blank background correction.

58 GEOSCIENCES↗
DOE OSTI2025

Diffusion kinetics of 3 He in pyroxene and plagioclase and applications to cosmogenic exposure dating and paleothermometry in mafic rocks

In this study, we investigate the diffusivity of cosmogenic 3 He in a variety of plagioclase and pyroxene compositions, and its application to paleothermometry and exposure dating in these minerals, through stepwise degassing experiments. While cosmogenic 3 He has been utilized for exposure dating in pyroxene for decades due to its retentivity, plagioclase, often found along with pyroxene in mafic rocks, is generally less retentive of cosmogenic noble gas. However, the diffusivity of 3 He in either plagioclase or pyroxene has not yet been measured quantitatively. A challenge in measuring diffusion kinetics by step-degassing experiments in poorly retentive minerals is the fact that significant amounts of He can be lost prior to the experiment. To address this issue, we apply a forward “multiple diffusion domain” (MDD) inversion model that includes model predictions of initial gas loss during irradiation and storage of the samples to account for this observation and add constraints to the diffusion parameters. We find that 3 He diffusivity in plagioclase appears to be highly variable. This variability can be explained by the MDD inversion models' inability to constrain the diffusion parameters when significant gas has been lost during irradiation and/or prolonged storage prior to experiment analysis, resulting in an overestimation of 3 He retentivity. Plagioclase samples that were kept frozen after irradiation, to limit this initial gas loss, yielded the most reliable estimate of diffusion kinetics. We find that 3 He in plagioclase is diffusively lost at Earth's surface temperatures on a timescale of 100 years and is therefore unsuitable for surface temperature paleothermometry. On the contrary, we find cosmogenic 3 He in pyroxene to be retentive at Earth's surface temperatures on a 1-million-year timescale.

Bergelin, Marie [Berkeley Geochronology Center (BG↗
DOE OSTI2024

Cobalt-based pyroxenes: A new playground for Kitaev physics

Recent advances in the study of cobaltites have unveiled their potential as a promising platform for realizing Kitaev physics in honeycomb systems and the Ising model in weakly coupled chain materials. In this manuscript, we explore the magnetic properties of pyroxene SrCoGe 2 O 6 using a combination of neutron scattering, ab initio methods, and linear spin-wave theory. Through careful examination of inelastic neutron scattering powder spectra, we propose a modified Kitaev model to accurately describe the twisted chains of edge-sharing octahedra surrounding Co 2+ ions. The extended Kitaev–Heisenberg model, including a significant anisotropic bond-dependent exchange term with K/|J| = 0.96, is identified as the key descriptor of the magnetic interactions in SrCoGe 2 O 6 . Furthermore, our heat capacity measurements reveal an effect of an external magnetic field (approximately 13 T) which shifts the system from a fragile antiferromagnetic ordering with T N = 9 K to a field-induced state. We argue that pyroxenes, particularly those modified by substituting Ge with Si and its less extended p orbitals, emerge as a platform for the Kitaev model. This opens up possibilities for advancing our understanding of Kitaev physics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Spin dynamics in natural multiferroic pyroxene NaFeSi 2 ⁢O 6

Spin dynamics in the natural mineral aegirine, NaFeSi 2⁢ O 6 , a member of the pyroxene family, was studied by elastic and inelastic neutron scattering. Magnetization and specific-heat measurements as well as single-crystal neutron diffraction maps, taken in the temperature range 2–20 K, confirm two successive magnetic transitions at 8.8 and 5.8 K, consistent with previous studies. The observed spin-wave excitations emerge from the incommensurate magnetic Bragg peaks corresponding to the propagation vector 𝑘 ICM = (0,0.77,0), and extend up to energies of about 1.5 meV. In the low-temperature helical phase, the spin dynamics of the Fe3+ ions is well described by a simple linear spin-wave model. The observed excitations can be modeled using a spin Hamiltonian that includes three primary exchange interactions—intrachain coupling 𝐽 = 0.142⁢(2) ⁢meV, and interchain couplings 𝐽 1 = 0.083⁢(1) ⁢meV and 𝐽 2 = 0.186⁢(1) meV—and an easy-plane anisotropy 𝐷 = 0.020⁢(6)⁢ meV. Furthermore, our results show that no single exchange interaction dominates the spin dynamics. The similar strengths of the intrachain and interchain couplings point to the fact that the magnetic interactions in aegirine are three dimensional rather than confined along one direction. As a result, the system cannot be considered quasi one dimensional, as previously suggested, and calls for further investigations.

Magnetic coupling↗
DOE OSTI2024

A pyroxene-based quantum magnet with multiple magnetization plateaus

Pyroxenes (AMX 2 O 6 ) consisting of infinite one-dimensional edge-sharing MO 6 chains and bridging XO 4 tetrahedra are fertile ground for finding quantum materials. Thus, here, we have studied calcium cobalt germanate (CaCoGe 2 O 6 ) and calcium cobalt silicate (CaCoSi 2 O 6 ) crystals in depth. Heat capacity data show that the spins in both compounds are dominantly Ising-like, even after being manipulated by high magnetic fields. On cooling below the Néel temperatures, a sharp field–induced transition in magnetization is observed for CaCoGe 2 O 6 , while multiple magnetization plateaus beneath the full saturation moment are spotted for CaCoSi 2 O 6 . Our analysis shows that these contrasting behaviors potentially arise from the different electron configurations of germanium and silicon, in which the 3d orbitals are filled in the former but empty in the latter, enabling electron hopping. Thus, silicate tetrahedra can aid the interchain superexchange pathway between cobalt(II) ion centers, while germanate ones tend to block it during magnetization.

Science & Technology - Other Topics↗
DOE OSTI2025

Equilibrium Fe isotope fractionation between olivine, pyroxene, spinel and MORB glass: Implications for mantle partial melting to generate MORBs

Primitive mid-ocean ridge basalts (MORBs) exhibit Fe isotopic compositions heavier than the upper mantle by +0.074 ± 0.028 ‰ for δ 56 Fe. The processes responsible for this isotopic difference remain unclear. Modeling of Fe isotope fractionation during mantle partial melting requires reliable equilibrium Fe isotope fractionation factors between minerals and melts, for which consistent data are still lacking. Here, in this study, we used Nuclear Resonant Inelastic X-ray Scattering (NRIXS) technique to measure Fe force constants for a MORB glass (ALV 519-4-1) and natural mantle minerals (olivine, orthopyroxene, clinopyroxene, and spinel) to determine the equilibrium Fe isotope fractionation factors between them. The force constants determined in this study, in increasing order, are 167 ± 26 N/m for spinel, 175 ± 17 N/m for olivine, 176 ± 20 N/m for MORB glass, 205 ± 26 N/m for clinopyroxene, and 219 ± 36 N/m for orthopyroxene. We evaluated the previously proposed mechanisms for the heavy Fe isotopic composition of MORBs, including (i) mantle partial melting, (ii) mantle lithological heterogeneity, with pyroxenite in the source, (iii) mantle metasomatism by low-degree melts, and (iv) fractional crystallization of olivine from melts. For (i), we used the pMELTS program to simulate adiabatic decompression melting of mantle peridotites, and calculated Fe isotope fractionation based on Fe 3+ –Fe 2+ equilibrium-controlled fractionation, where Fe 3+ forms stronger bonds and is more incompatible than Fe 2+ . At 10 wt% peridotite melting, corresponding to MORB generation, only +0.03 ‰ Fe isotope fractionation between the melt and the original bulk composition (Δ 56 Fe = δ 56 Fe melt - δ 56 Fe 0 ) was produced, insufficient to account for the observed MORB-upper mantle difference. For (ii), melting of pyroxenites yields smaller Fe isotope fractionation than melting of peridotites, making it unlikely the cause for the MORB-upper mantle isotopic difference. For (iii), both the Fe 3+ /ΣFe ratio and the δ 56 Fe of melts increase with the degree of partial melting, indicating that low-degree melts are not isotopically heavy enough to significantly alter the isotopic composition of lithospheric mantle through metasomatism. For (iv), equilibrium isotope fractionation between olivine and melt is near zero. These results suggest that equilibrium Fe isotope fractionation alone cannot explain the MORB isotopic signature, highlighting the potential role of kinetic isotope fractionation. Using a diffusion model, we calculated kinetic Fe and Mg isotope fractionations associated with (iv) olivine crystallization from a melt, and found that the predicted Fe and Mg isotope fractionations were inconsistent with observations in MORBs. Qualitatively, two processes could have induced kinetic Fe isotope fractionation during MORB generation: (a) Fe-Mg interdiffusion between melt and solid during melt migration and (b) reactive melt-rock interactions during melt focusing. However, a quantitative understanding of their role in modifying the melt isotopic composition remains limited and requires further investigation.

Fe isotopes↗
DOE OSTI2024

Pressure-induced phase transitions in Ni-bearing ferrosilite (Ni-En31Fs65)

Abstract Orthopyroxene is an abundant mineral in subducting slabs. Studying its phase transitions at high pressure is important to the understanding of mineralogy of subducting slabs in the deep Earth. Synchrotron-based single-crystal X-ray diffraction experiments were conducted on a synthetic Ni-bearing ferrosilite (Ni-En31Fs65) at pressures up to 33.8 GPa. Three phase transitions were observed at 12.1(6), 15.6(6), and 31.3(25) GPa. The first two phase transitions in Ni-En31Fs65 resemble the previously described phase transitions in Ni-free Fe-rich orthopyroxenes, i.e., the initial α-opx (Pbca) transforms to β-opx (P21/c), then the latter transforms to γ-opx (Pbca). This indicates that the incorporation of a few mol% NiSiO3 does not influence the phase transition path of Fe-rich orthopyroxene. After the third phase transition, the structure (P21ca) of Ni-En31Fs65 resembles the previously reported β-popx observed in En90 at high pressure, although the onset pressure of the phase transition in Ni-En31Fs65 is ~7 GPa lower than that in En90. β-popx has a post-pyroxene structure that contains fivefold- and sixfold-coordinated Si cations. Our results indicate that the post-pyroxene structure is β-popx (P21ca) for either Fe-poor or Fe-rich orthopyroxenes, although the phase transition path before the pyroxene → post-pyroxene is compositionally dependent. Additionally, unlike the second and third transitions, whose onset pressures are monotonously decreased by increasing Fe content, the Fe effect on shifting the first transition is much more significant for orthopyroxenes within En <50 mol% than that within En >50 mol%.

Geochemistry & Geophysics↗
DOE OSTI2024

Effect of Particle Size on Raman Signal Strength of Silicate Minerals

Understanding the effects of particle size is necessary for quantifying minerals in mixtures using Raman spectroscopy. Raman signal intensity is evaluated using six common silicate minerals (two olivines, two pyroxenes, and two feldspars) at 10 particle size ranges. For olivines and feldspars, the highest peak intensities are observed in samples with 38–63 and 63–106 μm particle sizes. There is no such consistent trend for the pyroxene samples, although the overall low signal strength complicates those measurements. In conclusion, Raman spectra of samples with varying particle sizes appear to be influenced by two competing effects: scattering from particle boundaries and effective sampling volume.

58 GEOSCIENCES↗
DOE OSTI2023

Metasomatic alteration of coarse‐grained igneous calcium‐aluminum‐rich inclusions from CK3 carbonaceous chondrites

Abstract We report on the primary and secondary mineralogies of three coarse‐grained igneous calcium‐aluminum‐rich inclusions (CAIs) (Compact Type A [CTA], Type B [B], and forsterite‐bearing type B [FoB]) from the Northwest Africa (NWA) 5343 (CK3.7) and NWA 4964 (CK3.8) carbonaceous chondrites, compare them with the mineralogy of igneous CAIs from the Allende (CV3.6) chondrite, and discuss the nature of the alteration processes that affected the CK and CV CAIs. The primary mineralogy and mineral chemistry of the CK3 CAIs studied are similar to those from Allende; however, primary melilite and anorthite are nearly completely absent. Although the secondary minerals identified in CK CAIs (Al‐diopside, andradite, Cl‐apatite, clintonite, forsterite, ferroan olivine, Fe,Ni‐sulfides, grossular, ilmenite, magnetite, plagioclase, spinel, titanite, and wadalite) occur also in the Allende CAIs, there are several important differences: (i) In addition to melilite and anorthite, which are nearly completely replaced by secondary minerals, the alteration of CK CAIs also affected high‐Ti pyroxenes (fassaite and grossmanite) characterized by high Ti 3+ /Ti 4+ ratio and spinel. These pyroxenes are corroded and crosscut by veins of Fe‐ and Ti‐bearing grossular, Fe‐bearing Al,Ti‐diopside, titanite, and ilmenite. Spinel is corroded by Fe‐bearing Al‐diopside and grossular. (ii) The secondary mineral assemblages of grossular + monticellite and grossular + wollastonite, commonly observed in the Allende CAIs, are absent; the Fe‐bearing grossular + Fe‐bearing Al‐diopside ± Fe,Mg‐spinel, Fe‐bearing grossular + Fe,Mg‐olivine ± Fe,Mg‐spinel, and Ca,Na‐plagioclase + Fe‐bearing Al‐diopside + Fe‐bearing grossular assemblages are present instead. These mineral assemblages are often crosscut by veins of Fe‐bearing Al‐diopside, Fe,Mg‐olivine, Fe,Mg‐spinel, and Ca,Na‐plagioclase. The coarse‐grained secondary grossular and Al‐diopside often show multilayered chemical zoning with distinct compositional boundaries between the layers; the abundances of Fe and Ti typically increase toward the grain edges. (iv) Sodium‐rich secondary minerals, nepheline and sodalite, commonly observed in the peripheral portions of the Allende CAIs, are absent; Ca,Na‐plagioclase is present instead. We conclude that coarse‐grained igneous CAIs from CK3.7–3.8 s and Allende experienced an open‐system multistage metasomatic alteration in the presence of an aqueous solution–infiltration metasomatism. This process resulted in localized mobilization of all major rock‐forming elements: Si, Ca, Al, Ti, Mg, Fe, Mn, Na, K, and Cl. The metasomatic alteration of CK CAIs is more advanced and occurred under higher temperature and higher oxygen fugacity than that of the Allende CAIs.

Geochemistry & Geophysics↗
DOE OSTI2025

Secondary corundum‐bearing assemblages in Allende Ca,Al‐rich inclusions: Mineralogy, petrology, oxygen, and aluminum–magnesium isotope systematics

Here, we report on the mineralogy, petrology, oxygen, and aluminum–magnesium isotopic systematics of the secondary corundum-bearing assemblages in type B CAIs 3529Z and 3529G and fluffy type A (FTA) CAI ALH-2 from Allende (CV > 3.6). In 3529Z and 3529G, 2–5 μm-sized euhedral-to-subhedral corundum grains associate with secondary alumoåkermanite [(Ca,Na) 2 AlSi 2 O 7 ], grossular, spinel, grossite, celsian, kushiroite, and wadalite. In ALH-2, 2–5 μm-sized euhedral-to-subhedral corundum grains associate with secondary grossular, nepheline, spinel, and kushiroite. In 3529Z and 3529G, corundum and associated secondary grossite, spinel, alumoåkermanite, grossular, and kushiroite have similar 16 O-poor compositions (Δ 17 O = −2.2 ± 1.5‰); primary spinel is 16 O-rich (Δ 17 O ~ −23‰); Al,Ti-diopside shows a range of Δ 17 O (from ~ −24‰ to ~ −15‰); anorthite and melilite are 16 O-depleted to various degrees (−6.5‰ ≤ Δ 17 O ≤ −4.5‰ and Δ 17 O = −2.7 ± 0.8‰, respectively). In ALH-2, corundum shows a range of Δ 17 O, from ~ −9‰ to ~ −1‰; primary hibonite and spinel are 16 O-rich (Δ 17 O ~ −23‰); melilite and perovskite are 16 O-poor (Δ 17 O = −2.6 ± 1.5‰ and −3.1 ± 1.3‰, respectively). On the Al-Mg isotope diagram ( 26 Mg* versus 27 Al/ 24 Mg), primary Al,Ti-diopside, hibonite, melilite, and spinel in the Allende CAIs studied along the canonical isochron with inferred initial 26 Al/ 27 Al ratio [( 26 Al/ 27 Al) 0 ] of ~5 × 10 −5 . All secondary minerals have resolved excesses of 26 Mg*: alumoåkermanite, corundum, and grossite plot below the canonical isochron, whereas most spinel analyses plot above it. An internal isochron defined by the coexisting secondary corundum and alumoåkermanite in 3529Z has ( 26 Al/ 27 Al) 0 = (7.5 ± 2.6) × 10 −7 . We conclude that the corundum-bearing assemblages in Allende CAIs resulted from metasomatic alteration of primary melilite and anorthite, ~4–5 Ma after their crystallization. Metasomatic alteration of CAIs in the Allende parent asteroid by an aqueous fluid having Δ 17 O of ~ −3 ± 2‰ modified the O-isotope composition of their primary melilite, anorthite, and Ti-rich pyroxene; O-isotope compositions of primary hibonite, spinel, and low-Ti pyroxene escaped this modification.

Geosciences↗
DOE OSTI2021

BiInO 3 phases under asymmetric in-plane strain

Density functional theory is used to study the effect of asymmetric in-plane strain on various BiInO 3 phases. Structural relaxation is carried out to simulate the growth of coherently strained epitaxial films on (001) oriented orthorhombic perovskite substrates. The results are in particular analyzed with respect to commercially available substrates in order to assess the stabilization of new and fundamentally interesting BiInO 3 phases. We find that a pyroxene-like Pcca phase is energetically more favorable than the bulk-like Pna2 1 structure on standard cubic substrate materials, such as SrTiO 3 . However, the presence of imaginary phonon modes suggests that this phase is dynamically instable. The bulk-like structure instead is stable over a wide range of lattice in-plane strain, but coherent growth requires substrates with unusually large lattice parameters. We suggest the use of lanthanate substrates in order to produce high-quality thin films of the bulk phase.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Geologic hydrogen as an emerging fuel: experimental insights, thermodynamics, kinetics, and reactive transport modeling

Geologic hydrogen (GeoH 2 ) is emerging as a viable clean energy source. It is largely produced through serpentinization, a geological process in which ultramafic rocks react with water under suitable temperature and pressure. Here, this review synthesizes the current understanding of H 2 generation by serpentinization, with an emphasis on reaction mechanisms, kinetics, and thermodynamics, as well as on modeling flow and transport of reacting fluids in geological formations. We describe the role of mineral assemblages, such as olivine and pyroxene, fluid-rock interactions, and catalytic surfaces, in influencing GeoH 2 yield and reaction rates. By integrating models of reaction kinetics, subsurface reactive flow and transport, and the serpentinization process, and by accounting for the thermodynamic state of the system, this review aims to guide future GeoH 2 research and to evaluate the potential of natural hydrogen as a sustainable clean energy source.

Moradi, Rasoul [Univ. of Southern California, Los ↗
DOE OSTI2020

Petrogenesis, alteration, and shock history of intermediate shergottite Northwest Africa 7042: Evidence for hydrous magmatism on Mars?

We report Northwest Africa (NWA) 7042 is an intermediate, permafic shergottite consisting of two generations of zoned olivine (early olivine Fo 41-76 , and late-stage olivine Fo 46-56 ), complexly zoned pyroxene (En 35-64 Fs 22-46 Wo 5-34 ), maskelynitized feldspar and shock melt (An 5-30 Ab 16-61 Or 1-47 ), and accessory merrillite, apatite, ilmenite, titanomagnetite, Fe-Cr-Ti spinels, pyrrhotite, and baddeleyite. The olivine grains have been pervasively altered resulting in orange-brown stained cores with dark-brown margins, surrounded by significantly less altered overgrowth rims. This textural relationship suggests that the alteration of the cores took place at magmatic temperatures prior to crystallization of the rims on Mars. While this type of olivine alteration is rare in shergottites, it is similar to deuterically altered olivine in basalts and gabbros on Earth, caused by residual water-rich magmatic fluids. Launch-generated shock veins in NWA 7042 crosscut and displace several of the altered olivine grains indicating that the alteration occurred before ejection of the meteorite from Mars. However, NWA 7042 has also been subjected to extensive terrestrial weathering, with terrestrial calcite/barite veins occurring throughout the sample. Transmission electron microscopy analysis of the olivine alteration also reveals an absence of high-temperature phases typically associated with hydrous deuteric alteration on Earth, complicating our interpretation. The potential presence of deuterically altered olivine in NWA 7042 has significant implications, as it is the third martian meteorite where deuteric alteration of olivine has been observed (the others being NWA 10416, ALH 77005). The different mantle sources for the parental melts of these three meteorites would suggest many, if not all martian mantle reservoirs have the potential to produce water-rich magmas.

58 GEOSCIENCES↗