Search NASA⌕ Search

SEARCH · Search NASA

Results for “raindrops”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Statistical Characteristics of Raindrop Size Distributions and Parameters in Central China during the Meiyu Seasons

The rain parameters measured by the laser OTT Parsivel raindrop disdrometer (Parsivel), the two-dimensional video disdrometer (2DVD) and DZZ5 tipping-bucket rain gauge (RG) during the Integrative Monsoon Frontal Rainfall Experiment (IMFRE) in summer 2018 are compared. The total rain amounts observed by Parsivel, 2DVD, and RG during IMFRE are 178.07 mm, 176.76 mm and 182.5 mm, while their total rainy hours are 113, 113 and 90. The mean Dm (mass-weighted mean diameter) and liquid water content values derived from Parsivel and 2DVD are 0.9 mm and 1.02 mm, and 0.247 g m-3 and 0.223 g m-3, respectively, and Parsivel is more sensitive to small raindrops (< 1 mm) than 2DVD. The raindrop spectra measured by Parsivel and 2DVD have excellent agreement for both convective rain (CR) and stratiform rain (SR) within a range of Dm from 1 to 3.5 mm. The rain samples from six Parsivel sites over the middle reaches of the Yangtze River during the 2016–2018 meiyu seasons have been collected and processed. The frequency occurrences for rain rates (RR) < 5 and > 10 mm h-1 are 83.9% and 7.4%, respectively, but they contribute 30.5% and 52.1 % of the total accumulated rainfall. Comparing the results with those over the lower reaches, the RR and total accumulated rainfall over the middle reaches are greater, especially for heavy rainfall. The rain drop size distributions (DSDs) in this study are wider and have higher number concentration than those from the lower reaches.

Raindrop size distribution, Meiyu front, disdromet↗
DOE OSTI2022

Assessing Raindrop Breakup Parameterizations Using Disdrometer Observations

In this work, an intercomparison of raindrop mean diameter frequency distribution (RDFD) is performed for numerical simulations of precipitating cloud systems using an array of models and microphysics schemes. This includes results from the Regional Atmospheric Modeling System (RAMS) double-moment microphysics, the Hebrew University Cloud Model bin microphysics (HUCM) interfaced to the RAMS parent model, and the Weather Research and Forecasting (WRF) Model with the Thompson, Morrison, double-moment 6-class (WDM6), and National Severe Storms Laboratory (NSSL) double-moment schemes. Simulations are examined with respect to the raindrop size distribution (DSD) volume-number mean diameter (D m ) and intercept parameter (N w ). When compared to a suite of disdrometer observations, the RDFD resulting from each microphysics scheme exhibits varying degrees of mean drop size constraints and peaks in the frequency distribution of D m . A more detailed investigation of the peaked RDFD from the RAMS simulations suggests that the parameterization of raindrop collisional breakup can impose strong limitations on the evolution of simulated drop growth. As such, a summary and comparison of the drop breakup parameterizations among the aforementioned microphysics schemes is presented. While some drop breakup parameterizations are adjusted toward the observations by modifying the threshold diameter for the onset of breakup, this study explores the use of a modified maximum breakup efficiency. This method permits the parameterization to retain its threshold breakup diameter, while limiting the strength of drop breakup and permitting a broader range of drop sizes. As a result, the simulated mean drop sizes are in better agreement with observations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Raindrop Size Spectrum in Deep Convective Regions of the Americas

This study compared drop size distribution (DSD) measurements on the surfaces, the corresponding properties, and the precipitation modes among three deep convective regions within the Americas. The measurement compilation corresponded to two sites in the midlatitudes: the U.S. Southern Great Plains and Córdoba Province in subtropical South America, as well as to one site in the tropics: Manacapuru in central Amazonia; these are all areas where intense rain-producing systems contribute to the majority of rainfall in the Americas’ largest river basins. This compilation included two types of disdrometers (Parsivel and 2D-Video Disdrometer) that were used at the midlatitude sites and one type of disdrometer (Parsivel) that was deployed at the tropical site. The distributions of physical parameters (such as rain rate R, mass-weighted mean diameter D m , and normalized droplet concentration N w ) for the raindrop spectra without rainfall mode classification seemed similar, except for the much broader N w distributions in Córdoba. The raindrop spectra were then classified into a light precipitation mode and a precipitation mode by using a cutoff at 0.5 mm h -1 based on previous studies that characterized the full drop size spectra. These segregated rain modes are potentially unique relative to previously studied terrain-influenced sites. In the light precipitation and precipitation modes, the dominant higher frequency observed in a broad distribution of N w in both types of disdrometers and the identification of shallow light precipitation in vertically pointing cloud radar data represent unique characteristics of the Córdoba site relative to the others. As a result, the co-variability between the physical parameters of the DSD indicates that the precipitation observed in Córdoba may confound existing methods of determining the rain type by using the drop size distribution.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

How a raindrop gets shattered on biological surfaces

Many biological surfaces of animals and plants (e.g., bird feathers, insect wings, plant leaves, etc.) are superhydrophobic with rough surfaces at different length scales. Previous studies have focused on a simple drop-bouncing behavior on biological surfaces with low-speed impacts. However, we observed that an impacting drop at high speeds exhibits more complicated dynamics with unexpected shock-like patterns: Hundreds of shock-like waves are formed on the spreading drop, and the drop is then abruptly fragmented along with multiple nucleating holes. Such drop dynamics result in the rapid retraction of the spreading drop and thereby a more than twofold decrease in contact time. Our results may shed light on potential biological advantages of hypothermia risk reduction for endothermic animals and spore spreading enhancement for fungi via wave-induced drop fragmentation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Ice Multiplication by Fragmentation during Quasi-Spherical Freezing of Raindrops: A Theoretical Investigation

Ice multiplication by fragmentation during collision–freezing of supercooled rain or drizzle is investigated. A zero-dimensional dynamical system describes the time evolution of number densities of supercooled drops and ice crystals in a mixed-phase cloud. The characteristic time scale for this collision–freezing ice fragmentation is controlled by the collision efficiency, the number of ice fragments per freezing event, and the available number concentration of supercooled drops. The rate of the process is proportional to the number of supercooled drops available. Thus, ice may multiply extensively, even when the fragmentation number per freezing event is relatively small. The ratio of total numbers of ice particles to those from the first ice, namely, the “ice-enhancement factor,” is controlled both by the number of fragments per freezing event and by the available number concentration of supercooled drops in a similar manner. Especially, when ice fragmentation by freezing of supercooled drops is considered in isolation, the number of originally existing supercooled drops multiplied by the fragmentation number per freezing event yields the eventual number of ice crystals. When supercooled drops are continuously generated by coalescence, ice crystals from freezing fragmentation also continuously increase asymptotically at a rate equal to the generation rate of supercooled drops multiplied by the fragmentation number per freezing event. All these results are expressed by simple analytical forms, thanks to the simplicity of the theoretical model. These parameters can practically be used as a means for characterizing observed mixed-phase clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Occurrence of Warm Freezing Rain: Observation and Modeling Study

Freezing rain has been normally considered to be composed of supercooled raindrops when the 2 m air temperature (hereafter T as ) is below freezing. However, according to a statistical survey of freezing rain observations in China from 2000 to 2019, we find that there were 656 events that occurred at T as greater than 0°C (hereafter warm freezing rain and denoted by WFR), which account for 7% of the total freezing rain observations. Additionally, nearly 3% (266 observations) of freezing rain events occurred when the near-surface wet-bulb temperature was greater than 0°C. The modeling and sensitivity experiments on the nonequilibrium raindrop temperature (hereafter T r ) how that the temperature difference between raindrops and the atmosphere is the main cause of WFR. The magnitudes of the Δ T ar (difference between raindrop temperature T r and air temperature T a ) and Δ T ur (difference between T r and wet-bulb temperature T w ) are determined by the raindrop diameter D, temperature lapse rate $\Gamma$, and relative humidity RH. Increases of D and $\Gamma$, and a decrease of RH enhance Δ T ar and Δ T ur and thus the occurrence of WFR. Further simulations of 4 idealized and 370 real sounding profiles reveal that either the T a or the T w cannot properly distinguish the WFR events. When considering the temperature difference between raindrops and the atmosphere, the WFR can form by the “melting of solid hydrometeors” or “supercooled warm rain process.” This study can also deepen our understanding of the conditions of WFR and freezing rain formation at different altitudes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Quantifying the time‐specific kinetic energy of simulated rainfall using a dynamic rain gauge system

Abstract Raindrop impact derives from the kinetic energy of falling raindrops. Determining the kinetic energy of rainfall requires the size distribution and terminal velocity of raindrops, which necessitates complex instrumentation. To avoid this, empirical relations have been developed that relate rainfall intensity and the rate of kinetic energy, i.e., time‐specific kinetic energy (KE time ). In this study, a dynamic rain gauge system (DRGS) was used to quantify the KE time generated by a rainfall simulator without need of measuring raindrop size distributions or impact velocities. In a series of 10 rainfall tests, the KE time and rainfall intensity were 860.9 (±88.6) J m 2 h −1 and 72.1 (±1.9) mm h −1 , respectively. Estimated KE time was found to agree well with the power‐law relation presented by Petrů and Kalibová for high‐intensity simulated rainfall, which are the conditions when higher deviations occur. The DRGS may be a useful tool in quantifying the KE time of rainfall simulators in hopes to better understand raindrop impact mechanisms.

Wacha, Kenneth M.↗
DOE OSTI2022

How Much Attenuation Extinguishes mm-Wave Vertically Pointing Radar Return Signals?

Vertically pointing radars (VPRs) operating at millimeter wavelengths measure the power return from raindrops enabling precipitation retrievals as a function of height. However, as the rain rate increases, there are combinations of rain rate and rain path length that produce sufficient attenuation to prevent the radar from detecting raindrops all the way through rain shafts. This study explores the question: Which rain rate and path length combinations completely extinguish radar return signals for VPRs operating between 3 and 200 GHz? An important step in these simulations is converting attenuated radar reflectivity factor into radar received signal-to-noise ratio (SNR) in order to determine the range where the SNR drops below the receiver detection threshold. Configuring the simulations to mimic a U.S. Department of Energy Atmospheric Radiation Mission (ARM) W-band (95 GHz) radar deployed in Brazil, the simulation results indicate that a W-band radar could observe raindrops above 3.5 km only when the rain rate was less than approximately 4 mm h -1 . The deployed W-band radar measurements confirm the simulation results with maximum observed heights ranging between 3 and 4.5 km when a surface disdrometer measured 4 mm h -1 rain rate (based on 25-to-75 percentiles from over 25,000 W-band radar profiles). In summary, this study contributes to our understanding of how rain and atmospheric gas attenuation impacts the performance of millimeter-wave VPRs and will help with the design and configuration of multi-frequency VPRs deployed in future field campaigns.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Simulating a Mesoscale Convective System Using WRF with a New Spectral Bin Microphysics: Part 1: Hail vs Graupel

A modified Fast Spectral Bin Microphysics scheme (FSBM-2) embedded into the Weather Research and Forecasting Model (WRF) is used to simulate a mesoscale deep convective system observed during the Midlatitude Continental Convective Clouds Experiment (MC3E). FSBM-2 uses modified source codes as compared to the current FSBM (FSBM-1). In contrast to FSBM-1, FSBM-2 can simulate hail of several cm in diameter and includes additional processes such as spontaneous breakup of raindrops and aerosol regeneration by drop evaporation. It is shown that allowing large hail particles of diameters exceeding about 1 cm substantially increases the agreement between the simulated and observed squall-line structures both in the convective and stratiform regions. In contrast, if graupel particles are used to represent high-density hydrometeors in convective areas, the ratio of convective-to-stratiform areas diverges from the ratio seen in observations and maximum radar reflectivities are substantially underestimated. Analysis of snow size distributions in the stratiform area shows an important link between the ice crystals formed by homogeneous freezing in the convective area to ice particle number concentration in the stratiform region. Simulated raindrop size distributions in the stratiform area below the melting level from FSBM-2 show a good agreement with observations. The regeneration of CCN by droplet evaporation and detrainment of these CCN to the stratiform region increases the concentration of CCN there up to 8-9 km altitude; the additional CCN penetrate clouds and produce new droplets, leading to some convection intensification. Key words: Mesoscale convective systems (MCS), squall lines, spectral bin microphysics, large hail, in-cloud nucleation, size distributions of hydrometeors in MCS.

Shpund, Kobby↗
DOE OSTI2023

Tracing the Rain Formation Pathways in Numerical Simulations of Deep Convection

Quantifying the microphysical process contributions to surface precipitation in numerical simulations can be challenging. This is due to the fact that many microphysical processes contribute to the formation and depletion of rain drops and there is almost always a spatial/temporal mismatch between where/when rain is formed and where/when it strikes the surface. In this work, we develop a tracing method that tracks the sources and sinks of raindrop mass and number as they are advected by the Weather Research and Forecasting model. Applying the method to an idealized squall line confirms that convective precipitation is dominated by warm rain processes (autoconversion and accretion) while stratiform precipitation is dominated by the melting of rimed and unrimed ice crystals. Sensitivity experiments in which the prescribed cloud drop number concentration is increased confirm the conventional wisdom that weakened autoconversion increases the fraction of raindrops originating from cold rain processes. The method also reveals that when applied to deep convection the Khairoutdinov and Kogan autoconversion scheme produces an excessive number of raindrops which are subsequently clipped in P3 microphysics to keep the rain size distribution within prescribed limits. This problem can mostly be mitigated by increasing the assumed radius for raindrops created by autoconversion.

58 GEOSCIENCES↗
DOE OSTI2025

Investigating the Relative Roles of INPs and CCN in a Simulated Thunderstorm Using a New Immersion Freezing Algorithm

Microphysical processes in deep convective clouds are sensitive to the number concentrations of cloud condensation nuclei (CCN) and ice nucleating particles (INPs), but the effects of INPs are less studied. Modeling studies investigating the effects of INPs and/or CCN on deep convection typically retain a volume‐dependent raindrop freezing relation. The resulting neglect of aerosol accumulation in raindrops via drop collisions has likely produced unrealistic storm responses to INPs in past studies. To address this deficiency, a new immersion freezing algorithm was developed and embedded in a bulk microphysics scheme that freezes both cloud drops and raindrops using the same immersion freezing INP (IF‐INP) activity spectrum based on measurements. Multiple idealized simulations of a single case of deep convection observed during the Clouds, Aerosols, and Complex Terrain Interactions (CACTI) field campaign were conducted, with microphysical differences produced by independently altering IF‐INP temperature dependencies and CCN number concentrations from their observed values. Surface precipitation in all simulations resulted almost exclusively from riming graupel that melted upon descending to the surface. Rainfall and cold pools were substantially and systematically weakened with increased CCN due to decreased graupel riming rates but were relatively insensitive to variations in the magnitude and slope of IF‐INP spectra due to compensating depletion of supercooled liquid water. These compensating processes were a consequence of the accumulation of IF‐INPs in raindrops, encouraging caution in studying IF‐INP effects upon thunderstorms using traditional volume‐dependent drop freezing relationships.

CCN↗
DOE OSTI2023

Effects of Wind Shear and Aerosol Conditions on the Organization of Precipitating Marine Stratocumulus Clouds

Here this study examines how wind shear affects precipitating marine stratocumulus clouds under different cloud droplet number concentrations (N d ). We performed a series of large eddy simulations (LES) of nocturnal marine stratocumulus clouds using Cloud Model 1 (CM1). The simulations show that N d is the dominant factor for cloud cellular organization in this cloud regime rather than wind shear. Low N d characterizes the open cellular structure with a high in-cloud liquid water path (LWP). When wind shear is increased, the cloud fraction tends to decrease along with LWP, suggesting the cloud top region is significantly influenced by the entrainment and mixing of dry air from the free troposphere. We also examine cold pools in open and closed cellular clouds. Open-cell clouds produce larger and deeper cold pools compared to closed-cell clouds. Interestingly, cold pools can exist without surface precipitation and are produced by evaporation of light precipitation (drizzle) below the cloud base with weak downdrafts. The evaporation of raindrops and drizzle play an important role in initiating new convection, particularly where colliding outflows occur downstream of the cloud. This secondary convection contributes to the development and maintenance of the cloud cellular organization and formation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Corona splashing triggered by a loose monolayer of particles

In nature, high-speed raindrops often impact and spread on particulate surfaces (e.g., soil, plant leaves with spores or pollen). We study the dynamics of droplet impact on a loosely packed monolayer of particles by combining experimental and mathematical approaches. We find that the presence of mobile particles lowers the critical impact velocity at which the droplet exhibits corona splashing, as the particle area fraction is systematically increased. We rationalize this experimental observation by considering the jamming of frictional particles at the spreading rim. Elucidating the splashing transition of the drop on a particulate bed can lead to a better understanding of soil loss and erosion from falling raindrops

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Dependencies of Four Mechanisms of Secondary Ice Production on Cloud-Top Temperature in a Continental Convective Storm

Various mechanisms of secondary ice production (SIP) cause multiplication of numbers of ice particle, after the onset of primary ice. A measure of SIP is the ice enhancement ratio (“IE ratio”) defined here as the ratio between number concentrations of total ice (excluding homogeneously nucleated ice) and active ice-nucleating particles (INPs). A convective line observed on 11 May 2011 over the Southern Great Plains in the Mesoscale Continental Convective Cloud Experiment (MC3E) campaign was simulated with the “Aerosol–Cloud” (AC) model. AC is validated against coincident MC3E observations by aircraft, ground-based instruments, and satellite. Four SIP mechanisms are represented in AC: the Hallett–Mossop (HM) process of rime splintering, and fragmentation during ice–ice collisions, raindrop freezing, and sublimation. The vertical profile of the IE ratio, averaged over the entire simulation, is almost uniform (10 2 to 10 3 ) because fragmentation in ice–ice collisions dominates at long time scales, driving the ice concentration toward a theoretical maximum. The IE ratio increases with both the updraft (HM process, fragmentation during raindrop freezing, and ice–ice collisions) and downdraft speed (fragmentation during ice–ice collisions and sublimation). As reported historically in aircraft sampling, IE ratios were predicted to peak near 10 3 for cloud-top temperatures close to the −12°C level, mostly due to the HM process in typically young clouds with their age less than 15 min. Here, at higher altitudes with temperatures of −20° to −30°C, the predicted IE ratios were smaller, ranging from 10 to 10 2 , and mainly resulted from fragmentation in ice–ice collisions.

Aerosols↗