Search NASA⌕ Search

SEARCH · Search NASA

Results for “rapid development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Analysis of Rapidly Developing Low Cloud Ceilings in a Stable Environment

This report describes the work done by the Applied Meteorology Unit (AMU) in developing a database of days that experienced rapid (< 90 minutes) low cloud formation in a stable atmosphere, resulting in ceilings at the Shuttle Landing Facility (TTS) that violated Space Shuttle Flight Rules (FR). The meteorological conditions favoring the rapid formation of low ceilings include the presence of any inversion below 8000 ft, high relative humidity beneath the inversion, and a clockwise turning of the winds from the surface to the middle troposphere (approx. 15000 ft). The AMU compared and contrasted the atmospheric and thermodynamic conditions between days with rapid low ceiling formation and days with low ceiling resulting from other mechanism. The AMU found that the vertical wind profile is the probable discerning factor between the rapidly-forming ceiling days and other low ceiling days at TTS. Most rapidly-developing low ceiling days had a clockwise turning of the winds with height, whereas other low ceiling days typically had a counter-clockwise turning of the winds with height or negligible vertical wind shear. Forecasters at the Space Meteorology Group (SMG) issue 30 to 90 minute forecasts for low cloud ceilings at TTS to support Space Shuttle landings. Mission verification statistics have shown ceilings to be the number one forecast challenge. More specifically, forecasters at SMG are concerned with any rapidly developing clouds ceilings below 8000 ft in a stable, capped thermodynamic environment, Therefore, the AMU was tasked to examine archived events of rapid stable cloud formation resulting in ceilings below 8000 ft, and document the atmospheric regimes favoring this type of cloud development. The AMU examined the cool season months of November to March during the years of 1993-2003 for days that had low-level inversions and rapid, stable low cloud formation that resulted in ceilings violating the Space Shuttle FR. The AMU wrote and modified existing code to identify inversions from the morning Cape Canaveral, FL rawinsonde (XMR) during the cool season and output pertinent sounding information. They parsed all days with cloud ceilings below 8000 ft at TTS, forming a database of possible rapidly-developing low ceiling events. Days with precipitation or noticeable fog bum-off situations were excluded from the database. Only the daytime hours were examined for possible ceiling development events since low clouds are easier to diagnose with visible satellite imagery. Follow-on work would expand the database to include nighttime cases, using a special enhancement of the infrared imagery for identifying areas of low clouds. The report presents two sample cases of rapidly-developing low cloud ceilings. These cases depict the representative meteorological and thermodynamic characteristics of such events. The cases also illustrate how quickly the cloud decks can develop, sometimes forming in 30 minutes or less. The report also summarizes the composite meteorological conditions for 20 event days with rapid low cloud ceiling formation and 48 non-events days consisting of advection or widespread low cloud ceilings. The meteorological conditions were quite similar for both the event and non-event days, since both types of days experienced low cloud ceilings. Both types of days had a relatively moist environment beneath the inversion based below 8000 ft. In the 20 events identified, de onset of low ceilings occurred between 1200-1800 UTC in every instance. The distinguishing factor between the event and non-event days appears to be the vertical wind profile in the XMR sounding. Eighty-five percent of the event days had a clockwise turning of the winds with height in the lower to middle troposphere whereas 83% of the non-events had a counter-clockwise turning of the winds with height or negligible vertical wind shear. A clockwise turning of the winds with height indicates a warm advection regime, which supports large-scale rising motn and possible cloud formation. Meanwhile, a counter-clockwise turning of the winds with height indicates cold advection or sinking motion in a post-cold frontal environment.

Wheeler, Mark M.↗

Library reuse in a rapid development environment

The Aeroscience and Flight Mechanics Division (AFMD) established a Rapid Development Laboratory (RDL) to investigate and improve new 'rapid development' software production processes and refine the use of commercial, off-the-shelf (COTS) tools. These tools and processes take an avionics design project from initial inception through high fidelity, real-time, hardware-in-the-loop (HIL) testing. One central theme of a rapid development process is the use and integration of a variety of COTS tools: This paper discusses the RDL MATRIX(sub x)(R) libraries, as well as the techniques for managing and documenting these libraries. This paper also shows the methods used for building simulations with the Advanced Simulation Development System (ASDS) libraries, and provides metrics to illustrate the amount of reuse for five complete simulations. Combining ASDS libraries with MATRIX(sub x)(R) libraries is discussed.

Uhde, JO↗

Peru Health & Air Quality: Land Use Change in the Rapidly Developing Peruvian Amazon and Implications on Zoonotic Disease Incidence

In the Madre de Dios region of the Peruvian Amazon, forests are being cleared for mining, timber harvesting, road construction, and hydroelectric dam development. These rapid land use changes are increasing human presence in previously sparsely populated areas, disrupting ecosystems and increasing the proximity of human settlement to zoonotic disease vectors. Dengue fever and leishmaniasis are two neglected tropical diseases which are prevalent in Madre de Dios and have been associated with urbanization and road construction. In partnership with the Peruvian Ministries of Health (MINSA) and the Environment (MINAM) and other in-country collaborators, our team examined Land Use Land Cover (LULC) correlations with reported dengue and leishmaniasis incidence in the Madre de Dios region to help partners understand the spatial relationship between land use change and zoonotic disease incidence. We created a LULC classification script using Google Earth Engine with Landsat 5 Thematic Mapper and Landsat 8 Operational Land Imager imagery to classify land cover in 2010, 2015, and 2020 and evaluate changes over this time period. We then used the quantified results of the LULC assessment in conjunction with reported disease cases to evaluate correlations between disease incidence and key land cover changes across Madre de Dios’s 11 districts. In the second term, the team will use these products to develop more detailed disease incidence risk maps and models. High risk areas will then be classified, using PeruSat-1 that allow for even higher resolution mapping at less than 3 meters. These products will allow the partners to understand hotspots of land cover change in Peru and the relationship with outbreaks to inform public health decision making and environmental policy.

Elizabeth Stapleton↗

Design and Development of an Equipotential Voltage Reference (Grounding) System for a Low-Cost Rapid-Development Modular Spacecraft Architecture

This work describes the design and development effort to adapt rapid-development space hardware by creating a ground system using solutions of low complexity, mass, & cost. The Lunar Atmosphere and Dust Environment Explorer (LADEE) spacecraft is based on the modular common spacecraft bus architecture developed at NASA Ames Research Center. The challenge was building upon the existing modular common bus design and development work and improving the LADEE spacecraft design by adding an Equipotential Voltage Reference (EVeR) system, commonly referred to as a ground system. This would aid LADEE in meeting Electromagnetic Environmental Effects (E3) requirements, thereby making the spacecraft more compatible with itself and its space environment. The methods used to adapt existing hardware are presented, including provisions which may be used on future spacecraft.

Lukash, James A.↗

A Study of Rapidly Developing Low Cloud Ceilings in a Stable Atmosphere at the Florida Spaceport

Forecasters at the Space Meteorology Group (SMG) issue 30 to 90 minute forecasts for low cloud ceilings at the Shuttle Landing Facility (KTTS) in Kennedy Space Center, FL for all Space Shuttle missions. Mission verification statistics have shown cloud ceilings to be the biggest forecast challenge. SMG forecasters are especially concerned with rapidly developing cloud ceilings below 8000 ft. in a stable, capped thermodynamic environment because ceilings below 8000 ft restrict Shuttle landing operations and are the most challenging to predict accurately. This project involves the development of a database of these cases over east-central Florida in order to identify the onset, location, and if possible, dissipation times of rapidly-developing low cloud ceilings. Another goal is to document the atmospheric regimes favoring this type of cloud development to improve forecast skill of such events during Space Shuttle launch and landing operations. A 10-year database of stable, rapid low cloud development days during the daylight hours was compiled for the Florida cool-season months by examining the Cape Canaveral Air Force Station sounding data, and identifying days that had high boundary layer relative humidity associated with a thermally-capped environment below 8000 ft. Archived hourly surface observations from KTTS and Melbourne, Orlando, Sanford, and Ocala, FL were then examined for the onset of cloud ceilings below 8000 ft between 1100 and 2000 UTC. Once the database was supplemented with the hourly surface cloud observations, visible satellite imagery was examined in 30-minute intervals to confirm event occurrences. This paper will present results from some of the rapidly developing cloud ceiling cases and the prevailing meteorological conditions associated with these events, focusing on potential pre-curser information that may help improve their prediction.

FROM↗

Ada and the rapid development lifecycle

JPL is under contract, through NASA, with the US Army to develop a state-of-the-art Command Center System for the US European Command (USEUCOM). The Command Center System will receive, process, and integrate force status information from various sources and provide this integrated information to staff officers and decision makers in a format designed to enhance user comprehension and utility. The system is based on distributed workstation class microcomputers, VAX- and SUN-based data servers, and interfaces to existing military mainframe systems and communication networks. JPL is developing the Command Center System utilizing an incremental delivery methodology called the Rapid Development Methodology with adherence to government and industry standards including the UNIX operating system, X Windows, OSF/Motif, and the Ada programming language. Through a combination of software engineering techniques specific to the Ada programming language and the Rapid Development Approach, JPL was able to deliver capability to the military user incrementally, with comparable quality and improved economies of projects developed under more traditional software intensive system implementation methodologies.

Deforrest, Lloyd↗

Analysis of Rapidly Developing Low Cloud Ceilings in a Stable Environment

Forecasters at the Space Meteorology Group (SMG) issue 30 to 90 minute forecasts for low cloud ceilings at the Space Shuttle Landing Facility (TTS) to support Space Shuttle landings. Mission verification statistics have shown ceilings to be the number one forecast challenge for SMG. More specifically, forecasters at SMG are concerned with any rapidly developing clouds/ceilings below 8000 ft in a stable, capped thermodynamic environment. Therefore, the Applied Meteorology Unit (AMU) was tasked to examine archived events of rapid stable cloud formation resulting in ceilings below 8000 ft, and document the atmospheric regimes favoring this type of cloud development. The AMU examined the cool season months of November to March during the years of 1993-2003 for days that had low-level inversions and rapid, stable low cloud formation that resulted in ceilings violating the Space Shuttle Flight Rules. The AMU wrote and modified existing code to identify inversions from the morning (-10 UTC) Cape Canaveral, FL rawinsonde (XMR) during the cool season and output pertinent sounding information. They parsed all days with cloud ceilings below 8000 ft at TTS, forming a database of possible rapidly-developing low ceiling events. Days with precipitation or noticeable fog burn-off situations were excluded from the database. In the first phase of this work, only the daytime hours were examined for possible ceiling development events since low clouds are easier to diagnose with visible satellite imagery. Phase II of this work includes expanding the database to include nighttime cases which is underway as this abstract is being written. For the nighttime cases, the AMU will analyze both the 00 UTC soundings and the 10 UTC soundings to examine those data for the presence of a low-level inversion. The 00 UTC soundings will probably not have a surface-based inversion, but the presence of inversions or "neutral" layers aloft and below 8,000 ft will most likely help define the stable regime, being a thermodynamically "capped" environment. Occurrences of elevated low-level inversions or stable layers will be highlighted in conjunction with nights that experienced a possible development or onset of cloud ceilings below 8,000 ft. Using these criteria to narrow down the database, the AMU will then use archived IR satellite imagery for these possible events. This presentation summarizes the composite meteorological conditions for 20 daytime event days with rapid low cloud ceiling formation and 48 non-events days consisting of advection or widespread low cloud ceilings and describes two sample cases of daytime rapidly-developing low cloud ceilings. The authors will also summarize the work from the nighttime cases and describe a representative sample case from this data set.

Bauman, William H., III↗

Demonstration of Rapid Development Through Containerization: OSE-SAT

Modern advancements in spacecraft technology have enabled engineers to develop radically smaller and lighter spacecraft, which has drastically reduced the cost of putting spacecraft into space. Despite these advancements and the shrinking cost to get spacecraft into space, space exploration is still prohibitively expensive. So much so that many space missions prefer to err on the side of caution than take on additional risk by trying newer, unproven technologies. This risk-averse mission design, while very reasonable from a program management point of view, significantly impacts engineers’ ability to solve newer, more complicated problems and limits scientists’ ability to develop more complex experiments that rely on newer technology. Often these new technologies remain stuck at lower technology readiness levels for many years due to the space community's reluctance to take on the additional risks of proving out unproven technology. The Distributed Spacecraft Autonomy (DSA) team at NASA Ames Research Center is developing a containerized solution to enable the rapid development of newer space technologies and accelerate their adoption into space missions. The Opportunistic Software Experiments for Spacecraft Autonomy Testbeds (OSE-SAT) is an on-orbit test bed that aims to reduce the amount of risk associated with newer, unproven space technologies by containerizing each experiment in its own isolated environment and providing a safe, robust, and controlled interface to access spacecraft host resources that is monitored in real time by thoroughly tested Trusted Container developed by DSA. This paper will describe DSA’s implementation of OSE-SAT and discuss the benefits, as well as challenges, of on-orbit containerization.

Aaron J Woodard↗

Rapid development of the X-31 simulation to support flight-testing

The X-31 Enhanced Fighter Maneuverability Program has been recognized to form the International Test Organization, with the NASA Dryden Flight Research Facility (NASA-Dryden) as the responsible test organization. The two X-31 research aircraft and engineering support personnel were colocated at NASA-Dryden, with flight test operations beginning in Apr. 1992. Therefore, rapid development of a hardware-in-the-loop simulation was needed to support the flight test operations at NASA-Dryden, and to perform verification and validation of flight control software. The X-31 simulation system requirements, distributed simulation system architecture, simulation components math models to the visual system, and the advanced capabilities the X-31 simulation provides. In addition, unique software tools and the methods used to rapidly develop this simulation system will be highlighted.

Mackall, Dale↗

Rapid development of the X-31 simulation to support flight-testing

The X-31 Enhanced Fighter Maneuverability Program has been recognized to form the International Test Organization, with the NASA Dryden Flight Research Facility (NASA-Dryden) as the responsible test organization. The two X-31 research aircraft and engineering support personnel were colocated at NASA-Dryden, with flight test operations beginning in Apr. 1992. Therefore, rapid development of a hardware-in-the-loop simulation was needed to support the flight test operations at NASA-Dryden, and to perform verification and validation of flight control software. The X-31 simulation system requirements, distributed simulation system architecture, simulation components math models to the visual system, and the advanced capabilities the X-31 simulation provides. In addition, unique software tools and the methods used to rapidly develop this simulation system will be highlighted.

Mackall, Dale↗

A model-based diagnostic study of the rapid development phase of the Presidents' Day cyclone

A model simulation of the rapid development phaser of the Presidents' Day cyclone on February 19, 1979, is studied. Model trajectories and Eulerian analyses show that, during this phase, three airstreams converge into the cyclogenetic region. The evolution of the PJ-trough system and its associated tropopause fold is described, including the simulated surface low and the vertical profile of mass divergence which contributes to the decreasing sea-level pressure. The various terms of the vorticity equation are evaluated to identify the processes contributing to the increase in absolute vorticity. The nature and origin of airstreams entering the low-level circulation associated with rapid cyclogenesis are examined from a Lagrangian perspective.

Whitaker, Jeffrey S.↗

Rapid Development of Disruptive Photovoltaic Technologies

Development of new PV technologies based on novel materials is an important direction of solar cell research to enhance the odds for beyond-TW scaling of solar energy production. However, such research presents a significant technical challenge, because it requires a balance between sufficient breadth (screening new materials) and depth (development of PV devices) of the problem. The objective of this project was to establish novel inorganic photovoltaic absorbers using rapid development approach. The studied materials were the potentially scalable defect-tolerant oxide- and nitride solar cell absorbers. For one of these materials (ZnSnN 2 ), we have experimentally demonstrated how to achieve low carrier density required for solar cell fabrication, and demonstrated that this synthesis process leads to near band edge photoluminescence supporting high optoelectronic quality of the material. For this ZnSnN 2 material, we also showed that cation disorder does not significantly influence carrier transport, and that benign defect complexes can lead to improved doping control, both supporting the targeted defect tolerance of this material. All these results have been summarized in peer review publications, some featured on journal covers. In addition, we established a new class of anti-perovskite absorbers, and published several review articles of the field.

14 SOLAR ENERGY↗

National Smart Manufacturing Strategic Plan: To Facilitate More Rapid Development, Deployment and Adoption of Smart Manufacturing Technologies

Smart manufacturing technologies provide real-time data and insight to improve the productivity, efficiency, and competitiveness of U.S. manufacturing, creating the potential for new jobs in the manufacturing sector. These technologies can support U.S. manufacturers’ ability to increase throughput and energy efficiency, and decrease waste, defects, and costs. A wide range of manufacturing and industrial subsectors, particularly energy-intensive and energy-dependent industries, have the potential to benefit from smart manufacturing technologies. There are technical improvements still needed to reduce the costs and barriers (trained workforce and upskilling, software-hardware integration, cost, and technical barriers to deployment of advanced sensors, computing, and communication technologies for existing manufacturing assets) to the adoption of smart manufacturing technologies, especially to small and medium-sized manufacturers, and subsequently, increase the overall adoption rate of smart manufacturing technologies. This report outlines the Department of Energy’s (DOE) strategic plan to accelerate the development and implementation of smart manufacturing technologies in the United States and the actions DOE has taken to use these technologies in smart manufacturing for the United States. DOE’s plan to facilitate more rapid development, deployment and widespread adoption of smart manufacturing technologies derive from the 2018 Strategy for American Leadership in Advanced Manufacturing. The strategy outlines a vision for America’s leadership in advanced manufacturing including the development of intelligent manufacturing systems to optimize manufacturing facilities and support the manufacturing of transformative materials. DOE’s Clean Energy Smart Manufacturing Innovation Institute (CESMII), a Manufacturing USA Institute, focuses on accelerating the development and adoption of advanced sensors, controls, platforms, and models needed for smart manufacturing. The objective is to enhance U.S. manufacturing productivity and global competitiveness through the research and development of these technologies. Smart manufacturing has the potential to improve the overall performance, energy productivity, and efficiency of manufacturing, fostering the economic competitiveness of the manufacturing sector.

99 GENERAL AND MISCELLANEOUS↗

Latent heating associated with a rapidly developing cyclone over the North Atlantic Ocean

The impact of latent heat release (LHR) on a rapidly developing extratropical cyclone is assessed by comparing the height tendencies forced by LHR with the total height tendency as represented by the extended height-tendency equation. In addition, the calculated LHR estimates are assessed using satellite information and observed precipitation rates. It is concluded that the calculated values underestimate the magnitude of LHR consistently. Furthermore, the over-water LHR patterns require adjustment in order to render them more consistent with the satellite-observed precipitating cloud features.

Fosdick, Earl K.↗

Rapid Development of Instrument Thermal Models: Perspectives and Guidelines from NASA Goddard’s Instrument Design Laboratory

The Instrument Design Laboratory (IDL), part of NASA Goddard Space Flight Center’s Integrated Design Center (IDC), is a concurrent and collaborative environment which allows for rapid development of science instrumentation concepts within the span of less than two weeks. Science goals set by a Principal Investigator from government, industry or academia are translated into engineering requirements, from which a team of engineers spanning multiple disciplines use an established study process and a suite of analysis tools to work towards an instrument point design. As part of this process, a staff thermal engineer is tasked with designing a thermal control system which meets all incoming thermal requirements, while iterating real-time with other subsystems to ensure compatibility and functionality as a completed system. Thermal engineers on spaceflight projects typically have weeks or months to develop thermal models. However, the severe time limitation in this conceptual study setting makes thermal design particularly difficult, as rapid thermal modeling solely over the span of a few days is required to develop the instrument thermal design and understand the performance over its intended mission, especially if the instrument concept contains multiple thermal challenges such as dynamic environments or high heat dissipating components. In this paper, the authors provide a condensed guide for the most efficient ways to develop thermal models and conduct thermal analysis within the span of one-to-two weeks, as informed by decades of design experience and best practices in the IDL. The authors also focus on quick methods for determining worst-case thermal environments, deciding which modeling details are essential at this early phase, and quantifying the engineering resources necessary for thermal control. This paper concludes with specific thermal design tips for different instrument types across the electromagnetic spectrum.

Kan Yang↗

The analysis of rapidly developing fog at the Kennedy Space Center

This report documents fog precursors and fog climatology at Kennedy Space Center (KSC) Florida from 1986 to 1990. The major emphasis of this report focuses on rapidly developing fog events that would affect the less than 7-statute mile visibility rule for End-Of-Mission (EOM) Shuttle landing at KSC (Rule 4-64(A)). The Applied Meteorology Unit's (AMU's) work is to: develop a data base for study of fog associated weather conditions relating to violations of this landing constraint; develop forecast techniques or rules-of-thumb to determine whether or not current conditions are likely to result in an acceptable condition at landing; validate the forecast techniques; and transition techniques to operational use. As part of the analysis the fog events were categorized as either advection, pre-frontal or radiation. As a result of these analyses, the AMU developed a fog climatological data base, identified fog precursors and developed forecaster tools and decision trees. The fog climatological analysis indicates that during the fog season (October to April) there is a higher risk for a visibility violation at KSC during the early morning hours (0700 to 1200 UTC), while 95 percent of all fog events have dissipated by 1600 UTC. A high number of fog events are characterized by a westerly component to the surface wind at KSC (92 percent) and 83 percent of the fog events had fog develop west of KSC first (up to 2 hours). The AMU developed fog decision trees and forecaster tools that would help the forecaster identify fog precursors up to 12 hours in advance. Using the decision trees as process tools ensures the important meteorological data are not overlooked in the forecast process. With these tools and a better understanding of fog formation in the local KSC area, the Shuttle weather support forecaster should be able to give the Launch and Flight Directors a better KSC fog forecast with more confidence.

Wheeler, Mark M.↗

A Methodology for the Rapid Development of Scalable HPC Data Services

There is growing evidence in the scientifc computing community that parallel file systems are not sufficient for all HPC storage workloads. This realization has motivated extensive research in new storage system designs. The question of which alternative we should turn towards implies that there could be a single answer satisfying a wide range of very diverse applications. We argue that such a generic solution does not exist. Instead, custom data services should be designed and tailored to the needs of specific applications on specific hardware. Furthermore, custom data services should be designed in close collaboration with users. In this paper, we present a methodology for the rapid development of such data services. This methodology promotes the design of reusable building blocks that can be composed together efficiently through a runtime based on high-performance threading, tasking, and remote procedure calls. We illustrate the success of our methodology by showcasing three examples of data services designed from the same building blocks, yet targeting entirely different applications.

Dorier, Mattieu↗

Camellia: A Rapid Development Framework for Finite Element Solvers

We report the discontinuous Petrov–Galerkin (DPG) methodology of Demkowicz and Gopalakrishnan guarantees the optimality of the finite element solution in a user-controllable energy norm, and provides several features supporting adaptive schemes. The approach provides stability automatically; there is no need for carefully derived numerical fluxes (as in DG schemes) or for mesh-dependent stabilization terms (as in stabilized methods). In this paper, we focus on features of Camellia that facilitate implementation of new DPG formulations; chief among these is a rich set of features in support of symbolic manipulation, which allow, e.g., bilinear formulations in the code to appear much as they would on paper. Many of these features are general in the sense that they can also be used in the implementation of other finite element formulations. In fact, because DPG’s requirements are essentially a superset of those of other finite element methods, Camellia provides built-in support for most common methods. We believe, however, that the combination of an essentially “hands-free” finite element methodology as found in DPG with the rapid development features of Camellia are particularly winsome, so we focus on use cases in this class. In addition to the symbolic manipulation features mentioned above, Camellia offers support for one-irregular adaptive meshes in 1D, 2D, 3D, and space-time. It provides a geometric multigrid preconditioner particularly suited for DPG problems, and supports distributed parallel execution using MPI. For its load balancing and distributed data structures, Camellia relies on packages from the Trilinos project, which simplifies interfacing with other computational science packages. Camellia also allows loading of standard mesh formats through an interface with the MOAB package. Camellia includes support for static condensation to eliminate element-interior degrees of freedom locally, usually resulting in substantial reduction of the cost of the global problem. Finally, we include a discussion of the variational formulations built into Camellia, with references to those formulations in the literature, as well as an MPI performance study.

97 MATHEMATICS AND COMPUTING↗