Search NASA⌕ Search

SEARCH · Search NASA

Results for “rapid development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Rapid Development of Disruptive Photovoltaic Technologies

Development of new PV technologies based on novel materials is an important direction of solar cell research to enhance the odds for beyond-TW scaling of solar energy production. However, such research presents a significant technical challenge, because it requires a balance between sufficient breadth (screening new materials) and depth (development of PV devices) of the problem. The objective of this project was to establish novel inorganic photovoltaic absorbers using rapid development approach. The studied materials were the potentially scalable defect-tolerant oxide- and nitride solar cell absorbers. For one of these materials (ZnSnN 2 ), we have experimentally demonstrated how to achieve low carrier density required for solar cell fabrication, and demonstrated that this synthesis process leads to near band edge photoluminescence supporting high optoelectronic quality of the material. For this ZnSnN 2 material, we also showed that cation disorder does not significantly influence carrier transport, and that benign defect complexes can lead to improved doping control, both supporting the targeted defect tolerance of this material. All these results have been summarized in peer review publications, some featured on journal covers. In addition, we established a new class of anti-perovskite absorbers, and published several review articles of the field.

14 SOLAR ENERGY↗

National Smart Manufacturing Strategic Plan: To Facilitate More Rapid Development, Deployment and Adoption of Smart Manufacturing Technologies

Smart manufacturing technologies provide real-time data and insight to improve the productivity, efficiency, and competitiveness of U.S. manufacturing, creating the potential for new jobs in the manufacturing sector. These technologies can support U.S. manufacturers’ ability to increase throughput and energy efficiency, and decrease waste, defects, and costs. A wide range of manufacturing and industrial subsectors, particularly energy-intensive and energy-dependent industries, have the potential to benefit from smart manufacturing technologies. There are technical improvements still needed to reduce the costs and barriers (trained workforce and upskilling, software-hardware integration, cost, and technical barriers to deployment of advanced sensors, computing, and communication technologies for existing manufacturing assets) to the adoption of smart manufacturing technologies, especially to small and medium-sized manufacturers, and subsequently, increase the overall adoption rate of smart manufacturing technologies. This report outlines the Department of Energy’s (DOE) strategic plan to accelerate the development and implementation of smart manufacturing technologies in the United States and the actions DOE has taken to use these technologies in smart manufacturing for the United States. DOE’s plan to facilitate more rapid development, deployment and widespread adoption of smart manufacturing technologies derive from the 2018 Strategy for American Leadership in Advanced Manufacturing. The strategy outlines a vision for America’s leadership in advanced manufacturing including the development of intelligent manufacturing systems to optimize manufacturing facilities and support the manufacturing of transformative materials. DOE’s Clean Energy Smart Manufacturing Innovation Institute (CESMII), a Manufacturing USA Institute, focuses on accelerating the development and adoption of advanced sensors, controls, platforms, and models needed for smart manufacturing. The objective is to enhance U.S. manufacturing productivity and global competitiveness through the research and development of these technologies. Smart manufacturing has the potential to improve the overall performance, energy productivity, and efficiency of manufacturing, fostering the economic competitiveness of the manufacturing sector.

99 GENERAL AND MISCELLANEOUS↗

A Methodology for the Rapid Development of Scalable HPC Data Services

There is growing evidence in the scientifc computing community that parallel file systems are not sufficient for all HPC storage workloads. This realization has motivated extensive research in new storage system designs. The question of which alternative we should turn towards implies that there could be a single answer satisfying a wide range of very diverse applications. We argue that such a generic solution does not exist. Instead, custom data services should be designed and tailored to the needs of specific applications on specific hardware. Furthermore, custom data services should be designed in close collaboration with users. In this paper, we present a methodology for the rapid development of such data services. This methodology promotes the design of reusable building blocks that can be composed together efficiently through a runtime based on high-performance threading, tasking, and remote procedure calls. We illustrate the success of our methodology by showcasing three examples of data services designed from the same building blocks, yet targeting entirely different applications.

Dorier, Mattieu↗

Camellia: A Rapid Development Framework for Finite Element Solvers

We report the discontinuous Petrov–Galerkin (DPG) methodology of Demkowicz and Gopalakrishnan guarantees the optimality of the finite element solution in a user-controllable energy norm, and provides several features supporting adaptive schemes. The approach provides stability automatically; there is no need for carefully derived numerical fluxes (as in DG schemes) or for mesh-dependent stabilization terms (as in stabilized methods). In this paper, we focus on features of Camellia that facilitate implementation of new DPG formulations; chief among these is a rich set of features in support of symbolic manipulation, which allow, e.g., bilinear formulations in the code to appear much as they would on paper. Many of these features are general in the sense that they can also be used in the implementation of other finite element formulations. In fact, because DPG’s requirements are essentially a superset of those of other finite element methods, Camellia provides built-in support for most common methods. We believe, however, that the combination of an essentially “hands-free” finite element methodology as found in DPG with the rapid development features of Camellia are particularly winsome, so we focus on use cases in this class. In addition to the symbolic manipulation features mentioned above, Camellia offers support for one-irregular adaptive meshes in 1D, 2D, 3D, and space-time. It provides a geometric multigrid preconditioner particularly suited for DPG problems, and supports distributed parallel execution using MPI. For its load balancing and distributed data structures, Camellia relies on packages from the Trilinos project, which simplifies interfacing with other computational science packages. Camellia also allows loading of standard mesh formats through an interface with the MOAB package. Camellia includes support for static condensation to eliminate element-interior degrees of freedom locally, usually resulting in substantial reduction of the cost of the global problem. Finally, we include a discussion of the variational formulations built into Camellia, with references to those formulations in the literature, as well as an MPI performance study.

97 MATHEMATICS AND COMPUTING↗

TEQUILA: a platform for rapid development of quantum algorithms

Variational quantum algorithms are currently the most promising class of algorithms for deployment on near-term quantum computers. In contrast to classical algorithms, there are almost no standardized methods in quantum algorithmic development yet, and the field continues to evolve rapidly. As in classical computing, heuristics play a crucial role in the development of new quantum algorithms, resulting in a high demand for flexible and reliable ways to implement, test, and share new ideas. In this paper, inspired by this demand, we introduce TEQUILA, a development package for quantum algorithms in PYTHON, designed for fast and flexible implementation, prototyping and deployment of novel quantum algorithms in electronic structure and other fields. TEQUILA operates with abstract expectation values which can be combined, transformed, differentiated, and optimized. On evaluation, the abstract data structures are compiled to run on state of the art quantum simulators or interfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spatial‐Uniformity–Driven Bayesian Optimization for Rapid Development of Printed Perovskite Solar Cells

Printed metal halide perovskites can enable rapid, roll-to-roll manufacturing of a broad class of optoelectronics—flexible solar cells and imagers among them—while promising cost and speed advantages over incumbent silicon. However, though current methods offer high throughput and patterning capabilities, perovskite films’ spatial heterogeneity remains a challenge for large-area devices. Here, a spatial-uniformity-driven Bayesian optimization (BO) approach is leveraged to accelerate the development of printed perovskite solar cells and improve large-area device performance. Using a BO surrogate model, a 6D design space of ink chemistry and printing physics is explored via extensive iterative experimentation (≈100) informed by an objective function capturing spatial photoluminescence (PL) variance. It is discovered that optimizing for uniformity drives rapid advances in photovoltaic performance, yielding ≈20% power conversion efficiency (PCE) for small area (0.134 cm 2 ) devices and > 16% for large area (1 cm 2 ) devices. This machine-learning approach simultaneously enables rheological comparison of ink formulations that accelerate the leveling of Saffman-Taylor artifacts and improve film uniformity. Here, this showcases uniformity-driven BO as an efficient approach for uncovering the key printing physics and mitigating spatial heterogeneity to enable device scaling beyond small cell areas.

14 SOLAR ENERGY↗

Developing rapid electrochemical relithiation protocols for scalable relithiation of lithium-ion battery cathode materials

The recent and ongoing boom in electric vehicle sales has caused the circularity of the supply chain for electric vehicle battery materials to come under a great deal of scrutiny. Innovative recycling processes, or direct recycling, that offer the possibility of reducing the cost of recycling are one possible solution to regaining resources from end-of-life (EoL) electric vehicle batteries. Electrochemically shuttling lithium back into the cathode, or electrochemical relithiation, is a possible technique for restoring lithium content to NMC materials (EoL) in a direct recycling process. This study provides essential understanding towards developing an electrochemical relithiation protocol that will restore lithium loss in intercalation cathode materials that reach EoL by loss of lithium inventory (LLI) as opposed to other degradation mechanisms like loss of active material (LAM), cation mixing or phase transition. Electrochemically aged NMC cathode materials have been prepared and characterized to establish the extent of EoL material structural degradation and lithium loss. A model-informed experimental process is used to identify the optimal electrochemical relithiation protocol to minimize the time taken to relithiate EoL materials and maximize the amount of lithium restored. Protocols were evaluated based on their ability to enable rapid lithium intercalation, maintain structural uniformity in the EoL material and fully restore lithium content. An optimal protocol was identified at elevated temperatures utilizing a novel scanning voltage step.

25 ENERGY STORAGE↗

Using Active Learning to Rapidly Develop Machine Learned Diffusion Coefficients of CO 2 Conversion Reagents in Metal–Organic Frameworks

Here, we used a combined molecular dynamics/active learning (AL) approach to create machine learning models that can predict the diffusion coefficient of epichlorohydrin and chloropropene carbonate, the reactant and product of a common CO 2 cycloaddition reaction, in metal–organic frameworks (MOFs). Nanoporous MOFs are effective catalysts for the cycloaddition of CO 2 to epoxides. The diffusion rates within nanoporous catalysts can control the rate of reaction as the reactants and products must diffuse to the active sites within the MOF and then out of the nanoporous material for reusability. However, the diffusion process is routinely ignored when searching for new materials in catalytic applications. Here we verified improvement during the AL process by consistently tracking metrics on the same groups of MOFs to ensure consistency. Metal identity was found to have little impact on diffusion rates, while structural features like pore limiting diameter act as a threshold where a minimum value is needed for high diffusion rates. We identified the MOFs with the highest epichlorohydrin and chloropropene carbonate diffusion coefficients which can be used for further studies of reaction energetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

INteroperable Tools for Rapid dEveloPment of compatible Discretizations

Intrepid is a library of interoperable tools for compatible discretizations of Partial Differential Equations (PDEs).Current version is intended primarily for application developers who want to reuse large parts of their existing code frameworks such as I/O, data structures, assembly routines, etc. while gaining access to advanced discretization capabilities provided by Intrepid. Intrepid2 is a performance portable version of Intrepid, that requires all input data types be Kokkos (performance-portability library from Trillions) multidimentional arrays. this restriction is needed for providing performance portability in Intrepid2 and break backward-compatibility of Intrepid.

Source record↗

Rapid development of an ice sheet climate application using the components-based approach

In the third year of a five-year jointly funded project, Sandia’s Albany/FELIX simulation code for ice sheet dynamics is being developed to be run in two modes: (1) as a stand-alone model for scientific investigations, and (2) as part of the land-ice component of coupled climate simulations in the Department of Energy’s (DOE’s) earth system model. The land-ice component simulates changes to the Greenland and Antarctic ice sheets, including their contributions to global sea-level rise. Using high performance computing (HPC), Sandia has recently completed a controlled mesh convergence study to compute the rate at which the Greenland ice sheet is flowing. The study demonstrated that the HPC code is capable of working accurately, efficiently, and reliably on larger scales (over 1 billion unknowns). The study also identified, for the first time, the minimum number of vertical levels needed in the mesh to maintain accuracy

54 ENVIRONMENTAL SCIENCES↗

Rapid Development of Hybrid Perovskites and Novel Tandem Architectures

Multijunction solar cells based on epitaxially grown III-V materials hold the record for solar energy power conversion efficiency (PCE). However, due to the high cost of fabricating these devices, they are typically only used for concentrator cells and space applications. The overarching goal of this project was to develop low-cost printable hybrid perovskite (HP) materials appropriate and optimized for tandem solar cells with high power conversion efficiency under “1 Sun” illumination. Key results and findings over the course of the project we: Developed higher-performance high-bandgap (1.75 eV) perovskite materials and devices. In particular, we explored tens-of-thousands of compositions for high bandgap perovskites, achieving quasi-Fermi level splitting of 1.35 eV for a 1.75 eV bandgap material. We achieved World-record open circuit voltages from single junction p-i-n devices, 1.24 V from 1.75 eV bandgap material, which is what is preferable for tandems with a PCE of 14.3% using a guanidinium/formanadinium/ cesium alloyed lead iodobromide. We also developed a series of World-record efficiency devices at higher band-gaps based on 2D/3D perovskites using PEA. Developed higher-performance low-bandgap (1.35 eV) perovskite materials and devices. In particular, we developed a 1.35 eV bandgap perovskite of composition MAPb0.5Sn0.5(I0.8Br0.2)3 and showed its superiority to MAPb0.75Sn0.25I3. High efficiency solar cells were fabricated using PEDOT:PSS and doped-ICBA as HTL and ETL, respectively. Short circuit currents of 25.7 mA/cm2 and PCEs of 17.1% were obtained. Developed mechanically stacked 4-terminal CIGS-Perovskite tandems with PCE of 18.8% and monolithic 2-terminal CIGS-Perovskite tandems with PCE of 8.5%. The low efficiency of the monolithic device is a result of the high surface roughness of the solution processed CIGS bottom cells. This is not an intrinsic problem for CIGS-perovskite tandems, but does mean that smooth evaporated or sputtered CIGS films likely need to be used, unless a polishing step is employed. Developed monolithic 2-terminal Perovskite-Perovskite tandems with a stabilized PCE of 18.5%. This was the World-record perovskite-perovskite monolithic tandems for over a year in 2017-2018. Revealed that light is not an essential component of the so-called “light-induced” phase segregation. By using charge injection in the dark and electroluminescence, we showed that the presence of electrons in the conduction band and hole in the valence band is sufficient to drive the nearly ubiquitously observed phase segregation in high bandgap perovskites. Developed a new method to simultaneously measure absolute intensity photoluminescence and photoconductivity and use them to obtain simultaneous in-situ measurement of quasi-Fermi level splitting and diffusion length. This is important since it provides a proxy for device Voc and device Jsc. In addition, 67 papers were published with support from this award that detail many more advances in the field, including numerous publications in high impact journals such as Nature Photonics, Advanced Materials, ACS Energy Letters, and Energy and Environmental Science.

14 SOLAR ENERGY↗

The Effect of Rapid Development on Soil CO2 Efflux in a Cellulosic Biofuel Stand

As awareness of climate change increases, the need for carbon neutral fuel sources is growing. Lignocellulosic biofuel derived from pine trees has been suggested as one potential energy source; however, it requires more research before its efficacy for climate change mitigation can be determined. Due to the large share of forest carbon held in soils and the extensive area of pine plantations in the southeast U.S., a better understanding of plantation soil carbon dynamics is critical for biofuel carbon accounting. This study evaluated the effects of canopy development and productivity on soil CO2 efflux, a proxy for soil respiration (Rs), in an intensively managed loblolly pine (Pinus taeda) stand over a period from May 2015 to December 2019. We found that leaf area index (LAI) and gross ecosystem production (GEP), as well as meteorological variables, had significant effects on Rs, but that both overall Rs and soil carbon pools did not increase over the course of the study. We thus hypothesize that GEP and LAI had intra-annual effects on Rs, and that the lack of change in Rs is the result of an increase in autotrophic respiration (Ra) that offset a decrease in decomposition of the previous stand’s organic matter.

09 BIOMASS FUELS↗