SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The new 9.6-kbps wideband data rate capability in the DSN is reviewed. A functional description of the completed implementation is presented, together with a plan to upgrade the central communications terminal for additional 9.6 s operational flexibility.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
A 50 Ampere-hour nickel-hydrogen cell with a single-layer Zircar separator stack design was fully charged and then discharged at a 2C current rate to an end voltage of 1 volt. This extreme test resulted in high temperatures which were recorded at three locations on the cell, i.e., the cell wall, the boss (barrel of the compression seal), and a terminal. The results provide new information about the high-temperature and high-discharge-rate capabilities of nickel-hydrogen cells. This information also adds to the growing data base for single-layer zirconium-oxide-cloth (Zircar) separator cell designs.
JPL is involved in the development of rechargeable Li-ion cells for future Mars Exploration Missions. The specific objectives are to improve the Li-ion cell cycle life performance and rate capability at low temperature (<<-20 C) in order to enhance survivability of the Mars lander and rover batteries. Poor Li-ion rate capability at low temperature has been attributed to: (1) the electrolytes becoming viscous or freezing and/or (2) reduced electrode capacity that results from decreased Li diffusivity. Our efforts focus on increasing the rate capability at low temperature for Li-ion cells. In order to improve the rate capability we evaluated the following: (1) cathode performance at low temperatures, (2) electrode active material particle size on low temperature performance and (3) Li diffusivity at room temperature and low temperatures. In this paper, we will discuss the results of our study.
In March 1985, the NASA/DOD Space Transportation System Master Plan was published. This document establishes objectives and plans for operating the Space Transportation System (STS) for the next decade. In the present paper, some key points are discussed, and the significance of the weather forecasting capability is indicated. The STS is to become fully operational by the later 1980's and is to support fully the national needs into the mid-1990's. Attention is given to NASA/DOD STS coordination, NASA/DOD STS Master Plan Traffic Models, the Orbiter Launch-Rate Capability, Launch-Rate Capabilities for Shuttle Processing Facilities at Kennedy Space Center, and Launch-Rate Capabilities for Shuttle Processing Facilities at Vandenberg Air Force Base.
An implementation of both finite rate and equilibrium chemistry have been completed for the OVERFLOW code, a chimera capable, complex geometry flow code widely used to predict transonic flow fields. The implementation builds on the computational efficiency and geometric generality of the solver.
We have been developing superconducting transition-edge sensor (TES) microcalorimeters for a variety of potential astrophysics missions, including Athena. The X-ray Integral Field Unit (X-IFU) instrument on this mission requires close-packed pixels on a 0.25 mm pitch, and high quantum efficiency between 0.2 and 12 keV. The traditional approach within our group has been to use square TES bilayers on molybdenum and gold that are between 100 and 140 microns in size, deposited on silicon nitride membranes to provide a weak thermal conductance to a 50 mK heat bath temperature. It has been shown that normal metal stripes on top of the bilayer are needed to keep the unexplained noise at a level consistent with the expected based upon estimates for the non-equilibrium non-linear Johnson noise.In this work we describe a new approach in which we use a square TES bilayer that is 50 microns in size. While the weak link effect is much stronger in this size of TES, we have found that excellent spectral performance can be achieved without the need for any normal metal strips on top of the TES. A spectral performance of 1.58 eV at 6 KeV has been achieved, the best resolution seen in any of our devices with this pixel size. The absence of normal metal stripes has led to more uniform transition shapes, and more reliable excellent spectral performance. The smaller TES size has meant that that the thermal conductance to the heat bath, determined by the perimeter length of the TES and the membrane thickness, is lower than on previous devices, and thus has a lower count rate capability. This is an advantage for low count-rate applications where the slower speed enables easier multiplexing in the read-out, thus potential higher multiplexing factors. In order to recover the higher count rate capabilities, a potential path exits using thicker silicon nitride membranes to increase the thermal conductance to the heat bath.
Rechargeable aluminum-graphite batteries using chloroaluminate-containing electrolytes have been the focus of significant research, particularly due to their high-rate capabilities. Engineered graphite electrodes have been shown to exhibit supercapacitor-like rate performance, despite the fact they store charge via the electrochemical intercalation of polyatomic AlCl4− anions. However, the origins of such rate capabilities are not well understood. Here, using electrochemical techniques, we disentangle quantitatively the diffusion-limited Faradaic, pseudocapacitive, and capacitive contributions to charge storage, revealing that AlCl4− anions intercalate into graphite with significant pseudocapacitive characteristics due to low ion diffusion limitations. Pristine and mildly exfoliated graphites are compared, where exfoliation resulted in significantly higher pseudocapacitive AlCl4− intercalation at the highest potential redox pair as well as higher galvanostatic capacity retention at faster discharge rates. The relationships between graphite structure, ion mass transport, and the overall rate of electrochemical AlCl4− intercalation are discussed. Ion diffusion within the electrolyte phase of the porous electrode is shown to play a key role in controlling the rate of intercalation at higher potentials and faster rates, which can be enhanced by reducing electrode tortuosity. The results establish that chloroaluminate anion intercalation into graphite exhibits non-diffusion-limited pseudocapacitive contributions that are tunable by modifying the graphite structure.
A number of electrolyte formulations that have been designed to operate over a wide temperature range have been investigated in conjunction with layered-layered metal oxide cathode materials developed at Argonne. In this study, we have evaluated a number of electrolytes in Li-ion cells consisting of Conoco Phillips A12 graphite anodes and Toda HE5050 Li(1.2)Ni(0.15)Co(0.10)Mn(0.55)O2 cathodes. The electrolytes studied consisted of LiPF6 in carbonate-based electrolytes that contain ester co-solvents with various solid electrolyte interphase (SEI) promoting additives, many of which have been demonstrated to perform well in 4V systems. More specifically, we have investigated the performance of a number of methyl butyrate (MB) containing electrolytes (i.e., LiPF6 in ethylene carbonate (EC) + ethyl methyl carbonate (EMC) + MB (20:20:60 v/v %) that contain various additives, including vinylene carbonate, lithium oxalate, and lithium bis(oxalato)borate (LiBOB). When these systems were evaluated at various rates at low temperatures, the methyl butyrate-based electrolytes resulted in improved rate capability compared to cells with all carbonate-based formulations. It was also ascertained that the slow cathode kinetics govern the generally poor rate capability at low temperature in contrast to traditionally used LiNi(0.80)Co(0.15)Al(0.05)O2-based systems, rather than being influenced strongly by the electrolyte type.
Future NASA missions aimed at exploring Mars and the outer planets require rechargeable batteries that can operate at low temperatures to satisfy the requirements of such applications as landers, rovers, and penetrators. A number of terrestrial applications, such as hybrid electric vehicles (HEVs) and electric vehicles (EVs) also require energy storage devices that can operate over a wide temperature range (i.e., -40 to +70 C), while still providing high power capability and long life. Currently, the state-of-the-art lithium-ion system has been demonstrated to operate over a wide range of temperatures (-30 to +40 C); however, the rate capability at the lower temperatures is very poor. These limitations at very low temperatures are due to poor electrolyte conductivity, poor lithium intercalation kinetics over the electrode surface layers, and poor ionic diffusion in the electrode bulk. Two wide-operating-temperature-range electrolytes have been developed based on advances involving lithium hexafluorophosphate-based solutions in carbonate and carbonate + ester solvent blends, which have been further optimized in the context of the technology and targeted applications. The approaches employed include further optimization of electrolytes containing methyl propionate (MP) and ethyl butyrate (EB), which are effective co-solvents, to widen the operating temperature range beyond the baseline systems. Attention was focused on further optimizing ester-based electrolyte formulations that have exhibited the best performance at temperatures ranging from -60 to +60 C, with an emphasis upon improving the rate capability at -20 to -40 C. This was accomplished by increasing electrolyte salt concentration to 1.20M and increasing the ester content to 60 percent by volume to increase the ionic conductivity at low temperatures. Two JPL-developed electrolytes 1.20M LiPF6 in EC+EMC+MP (20:20:60 v/v %) and 1.20M LiPF6 in EC+EMC+EB (20:20:60 v/v %) operate effectively over a wide temperature range in MCMB-LiNiCoAlO2 and Li4Ti5O12-LiNi-CoAlO2 prototype cells. These electrolytes have enabled high rate performance at low temperature (i.e., up to 2.0C rates at -50 C and 5.0C rates at -40 C), and good cycling performance over a wide temperature range (i.e., from -40 to +70 C). Current efforts are focused upon improving the high temperature resilience of the methyl propionatebased system through the use of electrolyte additives, which are envisioned to improve the nature of the solid electrolyte interphase (SEI) layers.
The Hurricane Imaging Radiometer (HIRAD) is the next-generation Stepped Frequency Microwave Radiometer (SFMR), and it will offer the capability of simultaneous wide-swath observations of both extreme ocean surface wind vector and strong precipitation from either aircraft (including UAS) or satellite platforms. HIRAD will be a compact, lightweight, low-power instrument with no moving parts that will produce valid wind observations under hurricane conditions when existing microwave sensors (radiometers or scatterometers) are hindered by precipitation. The SFMR i s a proven aircraft remote sensing system for simultaneously observing extreme ocean surface wind speeds and rain rates, including those of major hurricane intensity. The proposed HIRAD instrument advances beyond the current nadir viewing SFMR to an equivalent wide-swath SFMR imager using passive microwave synthetic thinned aperture radiometer technology. The first version of the instrument will be a single polarization system for wind speed and rain rate, with a dual-polarization system to follow for wind vector capability. This sensor will operate over 4-7 GHz (C-band frequencies) where the required tropical cyclone remote sensing physics has been validated by both SFMR and WindSat radiometers. HIRAD incorporates a unique, technologically advanced array antenna and several other technologies successfully demonstrated by NASA s Instrument Incubator Program. A brassboard (laboratory) version of the instrument has been completed and successfully tested in a test chamber. Development of the aircraft instrument is underway, with flight testing planned for the fall of 2009. Preliminary Observing System Simulation Experiments (OSSEs) show that HIRAD will have a significant positive impact on surface wind analyses as either a new aircraft or satellite sensor. New off-nadir data collected in 2008 by SFMR that affirms the ability of this measurement technique to obtain wind speed data at non-zero incidence angle will be presented, as well as data from the brassboard instrument chamber tests.
Developing a long-range manifest begins with the assessment of flight rate capability for the next 6 years. Payloads priorities, launch readiness, and service needs are reviewed and compatible mixed cargo flights are determined and integrated with the dedicated missions to become the manifest. Manifest development must also address Orbiter upgrades to assure that payload-related enhancements meet need dates and that new hardware integration does not adversely affect flight rate capability. A series of Space Shuttle upgrades and new capabilities are in development driven by a continuing effort to improve safety margins, support recognized payload needs, and unique SSF requirements. These enhancements include extended mission duration capability, ASRM development, extended middeck payload support capability, and improved attitude control systems.
The X-ray Integral Field Unit (X-IFU) on board the Advanced Telescope for High-ENergy Astrophysics (Athena) will provide spatially resolved high-resolution X-ray spectroscopy from 0.2 to 12 keV, with 5 pixels over a field of view of 5 arc minute equivalent diameter and a spectral resolution of 2.5 eV up to 7 keV. In this paper, we first review the core scientific objectives of Athena, driving the main performance parameters of the X-IFU, namely the spectral resolution, the field of view, the effective area, the count rate capabilities, the instrumental background. We also illustrate the breakthrough potential of the X-IFU for some observatory science goals. Then we brie y describe the X-IFU design as defined at the time of the mission consolidation review concluded in May 2016, and report on its predicted performance. Finally, we discuss some options to improve the instrument performance while not increasing its complexity and resource demands (e.g. count rate capability, spectral resolution). (2016) .
The affordability of transportation to or from space is of continued interest across numerous and diverse stakeholders in our aerospace industry. Such an important metric as affordability deserves a clear understanding among stakeholders about what is meant by affordability, costs, and related terms, as otherwise it's difficult to see where specific improvements are needed or where to target specific investments. As captured in the famous words of Lewis Carroll, "If you don't know where you are going, any road will get you there". As important as understanding a metric may be, with terms such as costs, prices, specific costs, average costs, marginal costs, etc., it is equally important to understand the relationship among these measures. In turn, these measures intermingle with caveats and factors that introduce more measures in need of a common understanding among stakeholders. These factors include flight rates, capability, and payload. This paper seeks to review the costs of space transportation systems and the relationships among the many factors involved in costs from the points of view of diverse decision makers. A decision maker may have an interest in acquiring a single launch considering the best price (along with other factors in their business case), or an interest in many launches over time. Alternately, a decision maker may have a specific interest in developing a space transportation system that will offer certain prices, or flight rate capability, or both, at a certain up-front cost. The question arises for the later, to reuse or to expend? As it is necessary in thinking about the future to clearly understand the past and the present, this paper will present data and graphics to assist stakeholders in visualizing trends and the current state of affairs in the launch industry. At all times, raw data will be referenced (or made available separately) alongside detailed explanations about the data, so as to avoid the confusion or misleading conclusions that occur more often than not with complex graphs or statements when such context is lacking.
The Jet Propulsion Laboratory is actively engaged in the development of ambient temperature rechargable lithium cells for future NASA geosynchronous Earth orbit (GEO) missions. To achieve these ambitious goals, Li-TiS2, Li-MoS3, and Li-V6O13 systems were examined in detail. Among these three, the Li-TiS2 system has shown the longest life cycle and highest rate capability. Experimental Li-TiS2 batteries (10.5 V, 0.4 Ah) developed in-house have completed eight simulated and accelerated GEO seasons successfully. Inview of the encouraging results, the design options were examined for a scaled-up Li-TiS2 cell. It is hoped that the results of these studies will provide guidelines for prioritizing the research efforts and guiding the selection of optimized materials. Designs for 35 Ah Li-TiS2 cell were examined because present day geosynchronous satellites are powered by batteries of 35 Ah capacity. A computer program was developed to evaluate the influence of various design parameters on the specific energy and the rate capability of the cells.
The combined use of a space-based radar and a radiometer for measurement of precipitation is discussed. Phenomena to exploit or overcome is surveyed. Basic measurement problems are discussed. Several active systems are proposed, including three ocean systems and two land-sea systems. Recommendations for future research are given.
In this paper, we will present several performance characterization tests, including cycle life at different temperatures, rate capability at various charge/discharge rates and temperatures and real tim and accelerated storage, which were carried out on these prototype cells in support of the Mars exploration missions.