Search NASA⌕ Search

SEARCH · Search NASA

Results for “real time sensing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Real-time sensing of optical alignment

The Large Deployable Reflector and other future segmented optical systems may require autonomous, real-time alignment of their optical surfaces. Researchers have developed gratings located directly on a mirror surface to provide interferometric sensing of the location and figure of the mirror. The grating diffracts a small portion of the incident beam to a diffractive focus where the designed diagnostics can be performed. Mirrors with diffraction gratings were fabricated in two separate ways. The formation of a holographic grating over the entire surface of a mirror, thereby forming a Zone Plate Mirror (ZPM) is described. Researchers have also used computer-generated hologram (CGH) patches for alignment and figure sensing of mirrors. When appropriately illuminated, a grid of patches spread over a mirror segment will yield a grid of point images at a wavefront sensor, with the relative location of the points providing information on the figure and location of the mirror. A particular advantage of using the CGH approach is that the holographic patches can be computed, fabricated, and replicated on a mirror segment in a mass production 1-g clean room environment.

Stier, Mark T.↗

In-flight demonstration of a Real-Time Flush Airdata Sensing (RT-FADS) system

A prototype real-time flush airdata sensing (RT-FADS) system has been developed and flight tested at the NASA Dryden Flight Research Center. This system uses a matrix of pressure orifices on the vehicle nose to estimate airdata parameters in real time using nonlinear regression. The algorithm is robust to sensor failures and noise in the measured pressures. The RT-FADS system has been calibrated using inertial trajectory measurements that were bootstrapped for atmospheric conditions using meteorological data. Mach numbers as high as 1.6 and angles of attack greater than 45 deg have been tested. The system performance has been evaluated by comparing the RT-FADS to the ship system airdata computer measurements to give a quantitative evaluation relative to an accepted measurement standard. Nominal agreements of approximately 0.003 in Mach number and 0.20 deg in angle of attack and angle of sideslip have been achieved.

Whitmore, Stephen A.↗

Real-time applications for remotely sensed lightning observations

Real-time monitoring of lightning activity, including the estimation of the location where the flash strikes the earth, provides a basis for the assessment of the impact of both the lightning hazard and severe weather on daily test and operation schedules. Applications to range meteorology are considered, taking into account the Space Transportation System, the handling of explosive materials, and test operations. Attention is given to details regarding forecasting and nowcasting, a low-cost lightning display system for electrical storm tracking and the support of lightning research activities, two versions of employed software, an example of the storm diagnostics and display products which will be available from the next generation weather radar, and a summary of the evolution of 12 New Mexico thunderstorms.

Goodman, S. J.↗

Sensing the gas metal arc welding process

Control of gas metal arc welding (GMAW) requires real-time sensing of the process. Three sensing techniques for GMAW are being developed at the Idaho National Engineering Laboratory (INEL). These are (1) noncontacting ultrasonic sensing using a laser/EMAT (electromagnetic acoustic transducer) to detect defects in the solidified weld on a pass-by-pass basis, (2) integrated optical sensing using a CCD camera and a laser stripe to obtain cooling rate and weld bead geometry information, and (3) monitoring fluctuations in digitized welding voltage data to detect the mode of metal droplet transfer and assure that the desired mass input is achieved.

Carlson, N. M.↗

THREAD: A programming environment for interactive planning-level robotics applications

THREAD programming language, which was developed to meet the needs of researchers in developing robotics applications that perform such tasks as grasp, trajectory design, sensor data analysis, and interfacing with external subsystems in order to perform servo-level control of manipulators and real time sensing is discussed. The philosophy behind THREAD, the issues which entered into its design, and the features of the language are discussed from the viewpoint of researchers who want to develop algorithms in a simulation environment, and from those who want to implement physical robotics systems. The detailed functions of the many complex robotics algorithms and tools which are part of the language are not explained, but an overall impression of their capability is given.

Beahan, John J., Jr.↗

The control of purity and stoichiometry of compound semiconductors by high vapor pressure transport

In this report we summarize the results of a three year research program on high pressure vapor transport (HPVT) of compound semiconductors. Most of our work focused onto pnictides, in particular ZnGeP2, as a model system. Access to single crystals of well controlled composition of this material is desired for advancing the understanding and control of its point defect chemistry in the contest of remote, real-time sensing of trace impurities, e.g., greenhouse gases, in the atmosphere by ZnGeP2 optical parametric oscillators (OPO's).

Bachmann, Klaus J.↗

Sensor Technology for Integrated Vehicle Health Management of Aerospace Vehicles

NASA is focusing considerable efforts on technology development for Integrated Vehicle Health Management systems. The research in this area is targeted toward increasing aerospace vehicle safety and reliability, while reducing vehicle operating and maintenance costs. Onboard, real-time sensing technologies that can provide detailed information on structural integrity are central to such a health management system. This paper describes a number of sensor technologies currently under development for integrated vehicle health management. The capabilities, current limitations, and future research needs of these technologies are addressed.

Prosser, W. H.↗

A Structurally-Adaptive Framework for Distributed Airborne Sensing over Real-time Collaborative Information Sharing Networks

The emergence and maturation of wireless communication technologies continue to transform the aviation industry and are enabling new solutions to challenges faced by NASA’s Advanced Air Mobility (AAM) initiative. AAM is leading towards high-density autonomous aircraft operations in areas underserved by traditional aviation, such as over densely populated urban centers. In this paper, we build on concepts from Smart Spaces - where sensing, processing, and communication are embedded in an environment, and agents are operating within the space can exploit these capabilities in real-time through collaborative information sharing networks. Building from these concepts, we propose a framework to enable a dynamic, topologically-adaptive, and distributed estimation system for man-rated aviation to address challenges faced by autonomous AAM operations. This paper presents the initial concept of operations and system design for this framework, presents a mathematical formulation for abstraction of the problem, identifies requirements and constraints for operation, and presents algorithmic constructs and mathematical formalisms to demonstrate operation. The proposed framework will be evaluated on a regional AAM flight scenario and will focus on two initial applications: (1) GPS-free navigation supporting precision approach and landing (PAL), and (2) surveillance and conformance monitoring of aircraft in vertiport airspaces. Such approaches show promise in addressing gaps in current technologies needed to enable future AAM concepts, while promising greater capabilities, performance, robustness, and safety over current aviation systems and operations.

Structurally-Adaptive↗

A Structurally-Adaptive Framework for Distributed Airborne Sensing over Real-time Collaborative Information Sharing Networks

The emergence and maturation of wireless communication technologies continue to transform the aviation industry and are enabling new solutions to challenges faced by NASA’s Advanced Air Mobility (AAM) initiative. AAM is leading towards high-density autonomous aircraft operations in areas underserved by traditional aviation, such as over densely populated urban centers. In this paper, we build on concepts from distributed sensing and smart spaces - where sensing, processing, and communication are embedded in an environment, and agents are operating within the space can exploit these capabilities in real-time through collaborative information sharing networks. Building from these concepts, we propose a framework to enable a dynamic, topologically-adaptive, and distributed estimation system for man-rated aviation to address challenges faced by autonomous AAM operations. This paper presents the initial concept of operations and system design for this framework, presents a mathematical formulation for abstraction of the problem, identifies requirements and constraints for operation, and presents algorithmic constructs to demonstrate operation. The initial framework design will focus on supporting precision navigation and independent surveillance supporting conformance monitoring of aircraft in airspace corridors and vertiport airspaces. Preliminary results from this framework shows promise in addressing gaps in current technologies needed to enable future AAM concepts, while promising greater capabilities, performance, robustness, and safety over current aviation systems and operations.

Distributed sensing↗

Distributed Sensing of a Cantilever Beam and Plate Using a Fiber Optic Sensing System

As the capabilities of Fiber Optic Sensing Systems continue to improve, their application to real-time distributed sensing for structural analysis and control of flexible systems is increasingly feasible. This paper will report experimental results on the use of a Fiber Optic Sensing System for static and dynamic shape estimation of a cantilever beam and plate. Demonstrating the use of this sensor technology in benchtop experiments is the first step in effectively incorporating fiber optic sensors in the Integrated Adaptive Wing Technology Maturation aeroelastic half-span wind tunnel model for real-time shape sensing and feedback for drag optimization, maneuver load alleviation, gust load alleviation, and flutter suppression control laws. The effectiveness of the sensing system will be analyzed and the application of these results to aeroelasticity experimentation will be discussed.

Heaney, Patrick S.↗

Using Remotely Sensed Information for Near Real-Time Landslide Hazard Assessment

The increasing availability of remotely sensed precipitation and surface products provides a unique opportunity to explore how landslide susceptibility and hazard assessment may be approached at larger spatial scales with higher resolution remote sensing products. A prototype global landslide hazard assessment framework has been developed to evaluate how landslide susceptibility and satellite-derived precipitation estimates can be used to identify potential landslide conditions in near-real time. Preliminary analysis of this algorithm suggests that forecasting errors are geographically variable due to the resolution and accuracy of the current susceptibility map and the application of satellite-based rainfall estimates. This research is currently working to improve the algorithm through considering higher spatial and temporal resolution landslide susceptibility information and testing different rainfall triggering thresholds, antecedent rainfall scenarios, and various surface products at regional and global scales.

remote sensing↗

Method for Real-Time Structure Shape-Sensing

The invention is a method for obtaining the displacement of a flexible structure by using strain measurements obtained by stain sensor,. By obtaining the displacement of structures in this manner, one may construct the deformed shape of the structure and display said deformed shape in real-time, enabling active control of the structure shape if desired.

Ko, William L.↗

The Atmospheric Channels of GLAS: Near Real-Time Global Lidar Remote Sensing of Clouds and Aerosols from Space

The Geoscience Laser Altimeter System (GLAS) will be placed into orbit in 2001 aboard the Ice, Cloud and Land Elevation Satellite (ICESat). From its nearly polar orbit (94 degree inclination), GLAS will provide continuous global measurements of the vertical distribution of clouds and aerosols while simultaneously providing high accuracy topographic profiling of surface features. During the mission, which is slated to last 3 to 5 years, the data collected by GLAS will be in near-real time to produce level 1 and 2 data products at the NASA GLAS Science Computing Facility (SCF) at Goddard Space Flight Center in Greenbelt, Maryland. The atmospheric products include cloud and aerosol layer heights, planetary boundary layer depth, polar stratospheric clouds and thin cloud and aerosol optical depth. These products will be made available to the science community within days of their creation. The processing algorithms must be robust, adaptive, efficient, and clever enough to run autonomously for the widely varying atmospheric conditions that will be encountered. This paper presents an overview of the GLAS atmospheric data products and briefly discusses the design of the processing algorithms.

Palm, Stephen P.↗

Real time simulation using position sensing

An interactive exercise system including exercise equipment having a resistance system, a speed sensor, a controller that varies the resistance setting of the exercise equipment, and a playback device for playing pre-recorded video and audio. The controller, operating in conjunction with speed information from the speed sensor and terrain information from media table files, dynamically varies the resistance setting of the exercise equipment in order to simulate varying degrees of difficulty while the playback device concurrently plays back the video and audio to create the simulation that the user is exercising in a natural setting such as a real-world exercise course.

Studor, George F.↗

Application of optical distributed sensing and computation to control of large space structures

A real time holographic sensing technique is introduced and its advantages are investigated from the filtering and control point of view. A feature of holographic sensing is its capability to make distributed measurements of the position and velocity of moving objects, such as a vibrating flexible space structure. This work is based upon the distributed parameter models of linear time invariant systems, particularly including the linear oscillator equations describing the vibration of large flexible space structures. The general conclusion is that application of optical distributed sensors bring gains in the situation where Kalman filtering is necessary for state estimation. In this case, both steady state and transient filtering error covariance become smaller. This in turn results in smaller cost in the LQG problem.

Balakrishnan, A. V.↗

Challenges of AVHRR Vegetation Data for Real Time Applications

Remote sensing data has long been used to monitor global ecosystems for floods and droughts and AVHRR data, as one of the first product, has many users interested in receiving the data within hours of acquisition. With the introduction of a new series of sensors in 2000 (the AVHRR/3 series), the quality of the NDVI datasets available for real time environmental monitoring has declined. This paper provides evidence of problems of cloud contamination, calibration and noise in the real time data which are not present in the historical AVHRR NDVIg dataset. These differences introduce significant uncertainty in the use of the real time data, degrading their utility for detecting climate variations in near real time.

Brown, Molly↗

The OpenSE Cookbook: A Practical, Recipe Based Collection of Patterns, Procedures, and Best Practices for Executable Systems Engineering for the Thirty Meter Telescope

The OpenSE Cookbook is an open-sourced collection of patterns, procedures, and best practices targeted for systems engineers who seek guidance on applying model-based and executable systems engineering (MBSE) using SysML. Its content has emerged from the system level modeling effort on the European Framework Program 6 (FP6) and the Thirty Meter Telescope (TMT). The TMT MBSE approach applied the Executable Systems Engineering Method (ESEM) and the open-source Engineering Environment (OpenMBEE) to specify, analyze, and verify requirements of TMT’s Alignment and Phasing System (APS) and the Narrow Field Infrared Adaptive Optics System (NFIRAOS). In these applications, implicit dependencies are made explicit in a formal model through the use of ESEM, OpenMBEE, and SysML modeling constructs. The value proposition for applying this MBSE approach was to establish precise requirements and fine-grained traceability to system designs, and to verify key requirements beginning early in development. The integration of ESEM and the OpenMBEE tooling infrastructure (providing linked-data and web-operability) is a significant added value for the MBSE approach. The APS is responsible for the overall pre-adaptive optics wavefront quality, using starlight to measure wavefront errors and align the TMT optics. In the formally integrated and executable SysML model, simulations are performed to analyze the impact of changed requirements and verify specified constraints for various operational scenarios. The APS team used several modeling patterns to capture information such as the requirements, the operational scenarios, involved subsystems and their interaction points, the estimated or required time durations, and the mass and power consumption. Adaptive optics systems are designed to sense real-time atmospheric turbulence and correct the telescope’s optical beam to remove its effect. The system model for the adaptive optics operational modes was developed to capture sequence behaviors and operational scenarios to run Monte-Carlo simulations for verifying acquisition time, observing efficiency, and operational behavior requirements. The model is particularly useful for investigating the effect of parallelization, identifying interface issues, and re-ordering sequence acquisition tasks. A former version of the Cookbook (which is now updated to MBSE challenges, goals, and lessons learned) included modeling guidelines and conventions for all system aspects, hierarchy levels, and views, which were developed during for the Active Phasing Experiment (APE), an opto-mechatronical system technology demonstrator for the Extremely Large Telescope (ELT). The Cookbook utilizes the above mentioned system models as real-world case-studies to demonstrate and document the applications of the recipes, providing also instructional examples and addressing the available tooling support. The Cookbook is accompanied by a number of SysML models and aodel libraries which facilitate model authoring and maintenance. The Cookbook covers the different aspects of Systems Engineering such as management of Requirements, Design (behavior and structure), Interfaces, Interdisciplinary Integration, Analysis, Trade Studies, and Technical Resources. This paper presents the background, motivation, architecture, and highlights some key content of the Cookbook. For example, interface management, error budget management, requirements verification, Monte Carlo driven analysis, and timing analysis of operational scenarios. The paper discusses how the capabilities of OpenMBEE contributed significantly to the adoption of executable systems engineering.

Brower, Eric↗

Shape Sensing for Wings with Spars and Ribs Using Simulated Strain

Active trim shape control can be used to minimize error between target and actual aircraft trim shape during flight. Trim shape sensing for aircraft during flight is not only important for highly flexible aircraft, such as the National Aeronautics and Space Administration (NASA) Helios Prototype remotely piloted flying wing aircraft, but also for a delta-wing type aircraft, such as a supersonic commercial transport aircraft. A two-step theory utilizing distributed strain for a real-time shape sensing of a full three-dimensional structure has been introduced previously. This study focuses on the application of the two-step theory to finite element models of a wing with spars and ribs such as the X-59 QueSST aircraft (Lockheed Martin Corporation, Bethesda, Maryland), a tapered wing, a dihedral/anhedral wing, and a stiffened dihedral/anhedral wing. A finely meshed finite element structural model is desired to capture accurate curvature distributions along the neutral axes of the wing cross sections during pre-test analysis for shape sensing of a wing with ribs and spars. The two-step theory used in this study gives excellent deformation correlation with the MSC/NASTRAN (MSC Software, Newport Beach, California) results along the neutral axis for all test cases used in this study except the X-59 QueSST aircraft.

strain↗