Search NASA⌕ Search

SEARCH · Search NASA

Results for “rhodamine-B”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Effective dose and persistence of Rhodamine-B in wild pig Vibrissae

Due to substantial ecological and economic damage attributed to wild pigs (Sus scrofa), there is international interest in using pharmaceutical baits to control populations. To assess the efficacy and specificity of baiting programs, one may use chemical biomarkers to evaluate uptake of pharmaceutical baits. In particular, Rhodamine B (RB) is known to be an effective biomarker in wild pigs. However, significant data gaps exist regarding the minimum effective dosage and the persistence of RB in wild pigs. To investigate this we used a controlled double-blind study, administering a one-time dose of RB at three treatment levels (5, 15, or 30 mg/kg) to 15 pigs, with five pigs per treatment group. Facial vibrissae were collected pre-RB ingestion as a control and every 2 weeks post-RB ingestion for 12 weeks. We examined samples for RB presence and used a generalized linear mixed model (GLMM) to determine the influence of treatment dose on persistence of RB. Additionally, we measured distance moved by the RB mark away from the vibrissae root and used a GLMM to assess movement rates of RB bands along growing vibrissae. Here, we found consistently greater persistence of RB in the 15 and 30 mg/kg treatments across the sampling period (p = 0.005 and p = <0.0001, respectively). A significant, positive movement trend in RB bands was observed within the 15 and 30mg/kg groups. Based on our results, a 15 mg/kg dosage can be considered a minimum effective dose for wild pigs and will reliably produce a detectable RB mark up to and likely beyond 12 weeks post-ingestion.

59 BASIC BIOLOGICAL SCIENCES↗

Synthesis of Tb{sub 4}O{sub 7} complexed with reduced graphene oxide for Rhodamine-B absorption

Highlights: • Tb–rGO composite was fabricated via a facile thermally reduction process. • The green and blue emissions were both observed in the composite. • The composite exhibited efficient absorption capability for Rhodamine-B. - Abstract: Tb{sub 4}O{sub 7} complexed with reduced graphene oxide composite (Tb–rGO) had been designed and fabricated by a facile thermal reduction method. The formation of Tb{sub 4}O{sub 7} particles and reduction of graphene oxide (GO) occurred simultaneously, and partial terbium ions would be complexed with rGO via oxygen-containing function groups on rGO sheets. Introducing of terbium ions could effectively tune the photoluminescence properties of rGO, and the composite exhibited the typical green emission of terbium ions as well as the blue self-luminescence of graphene entered at 440 nm. Moreover, Tb–rGO had demonstrated its high capability as an organic dye (Rhodamine-B) scavenger with high speed and efficiency. The findings showed the promising applications for large-scale removal of organic dye contaminants, especially in the field of waste water treatment.

36 MATERIALS SCIENCE↗

Mil-100(Fe) nanoparticles supported on urchin like Bi{sub 2}S{sub 3} structure for improving photocatalytic degradation of rhodamine-B dye under visible light irradiation

Highlights: • Facile synthesis a new hybrid photocatalyst MIL-100(Fe)@Bi{sub 2}S{sub 3}. • Investigation enhanced photocatalytic performance of MIL-100(Fe)@Bi{sub 2}S{sub 3} compared to individual components. • Determination the main active species during photocatalytic degradation of RhB over MIL-100(Fe)@Bi{sub 2}S{sub 3}. • Propose photocatalytic mechanism for degradation of RhB over MIL-100(Fe)@Bi{sub 2}S{sub 3}. - Abstract: Metal organic framework (MOFs) have been attracted a great attention as a new type photocatalysts due to their unique properties. In this work, the new hybrid photocatalyst based on fabrication hybrid structures between MIL-100(Fe) and Bi{sub 2}S{sub 3} (MIL-100(Fe)@Bi{sub 2}S{sub 3}) were synthesized via simple hydrothermal method. The photocatalytic degradation of Rhodamine B (RhB) over the as-prepared samples showed that the hybrid photocatalyst samples had higher photocatalytic performance compared to the individual components (MIL-100(Fe) and Bi{sub 2}S{sub 3}). The higher photocatalytic performance of the hybrid photocatalysts was proved by electrochemical and photoelectrochemical analysis such as electrochemical impedance spectroscopy (EIS) and also photocurrent measurement. In addition, the possible photocatalytic mechanism based on the optical, photoelectrochemical and quenching tests was proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syntheses, structures, photoluminescence and photocatalysis of 2D layered lanthanide-carboxylates with 2, 2′-dithiodibenzoic acid

Two series of lanthanide-carboxylates, [Ln(2,2′-dtba)(2,2′-Hdtba)(EtOH)]{sub n} (I:Ln=Eu(1a), Dy(1b)) and [Ln(2,2′-dtba)(2,2′-Hdtba)(4,4′-bpy){sub 0.5}]{sub n} (II:Ln=Eu(2a), Dy(2b), Tb(2c) 2,2′-H{sub 2}dtba=2,2′-dithiodibenzoic acid, 4,4′-bpy=4,4′-bipyridine) have been synthesized under hydrothermal conditions. Interestingly, the H{sub 2}dtba organic ligand was generated by in situ S–S reaction of 2-mercaptobenzoic acid. Compounds I and II possess different 2D layered structures based on similar 1D [Ln(2,2′-dtba)]{sup +} chains. Photoluminescence studies reveal that compounds I and II exhibit strong lanthanide characteristic emission bands. Remarkably, Compounds 1b and 2a both exhibit good photocatalytic activity for degradation of Rhodamine-B (Rh-B) under the simulated sunlight irradiation. - Graphical abstract: Two series of lanthanide-carboxylates have been in situ synthesized under hydrothermal conditions. The lanthanide-carboxylates exhibit strong lanthanide characteristic emission bands and good photocatalytic activity for degradation of Rhodamine-B. - Highlights: • 2D layered lanthanide-carboxylates with 2,2′-dithiodibenzoic acid. • In situ S–S reaction of 2-mercaptobenzoic acid under hydrothermal condition. • The Emission spectra of I and II exhibit the characteristic transition of lanthanide ions. • Compounds 1b and 2a exhibit good photocatalytic activity for degradation of Rhodamine-B.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modulating upconversion luminescence through fluorescent dyes

In our work, we report an effective method to tune the upconversion emission of NaGdF{sub 4}:Yb{sup 3+},Er{sup 3+}@NaYF{sub 4} core/shell nanoparticles. The shell thickness-dependent upconversion luminescence of NaGdF{sub 4}:Yb{sup 3+},Er{sup 3+}@NaYF{sub 4} core/shell and the dye Rhodamine-B(RhB) composite were discussed in detail. It is found that the fluorescent dye RhB can remarkably improve the violet emission of the upconversion nanoparticles (UCNPs) and simultaneously generating the 605 nm yellow emission through energy transfer. Importantly, it is revealed that the effective energy transfer distance between upconversion nanoparticles and RhB is shorter than 18 nm in the media of NaYF{sub 4}. These results open a novel way for determining the energy transfer distance between the upconversion nanoparticles and the dyes and simultaneously tuning the emission brightness and the spectrum covering range of the upconversion nanoparticles for meeting the requirement in the application fields of light source, colorful display, biological imaging, and fluorescent probes. - Graphical abstract: TEM images of core/shell upconversion nanoparticles and the illustration of Energy transfer distance UCNPs and Rhodamine-B molecular. Display Omitted - Highlights: • The upconversion nanoparticles with controlled surface morphology and shell thickness were prepared by thermal decomposition method. The emission brightness and the spectrum covering range of the upconversion nanoparticles can be tuned. • The fluorescent dye RhB can remarkably improve the violet emission of the upconversion nanoparticles and simultaneously generating the 605 nm yellow emission through energy transfer. • It is the first reported that the effective energy transfer distance between upconversion nanoparticles and RhB is shorter than 18 nm in the media of NaYF{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preliminary Collab Fracture Characterization Results from Flow and Tracer Testing Efforts

The EGS Collab project is developing ~10-20 m-scale field sites where fracture stimulation and flow models can be validated against controlled, small-scale, in-situ experiments. The first multi-well experimental site was established at the 4850 level in the Homestake Mine, where hydraulic fractures were created at an injection well drilled sub-horizontal from the drift. Ten tracer tests were conducted to characterize fracture flow pathways during the second hydraulic characterization test for 164’ Notch (October 24th to November 14th, 2018) during steady state injection of 400 ml/min at the injection well. Injected tracers include DNA, C-dots (fluorescein nano particles), fluorescein, rhodamine-b, sodium chloride, lithium bromide and cesium iodine. The tracers have been detected in three flowing wells located about 7.5 to 9 meters away from the injection interval. The tracer breakthrough curves from these locations have been adjusted to account for the residence time in the injection and production tubing. At the time of writing this paper, only the fluorescent C-dots, rhodamine-b and chloride have been analyzed for concentration vs time/volume at the production wells. Results from early testing have been re-analyzed as to the; amount and location of injected water recovery and the mass of tracer recovered.

15 GEOTHERMAL ENERGY↗

EGS Collab Testbed 1: Tracer data tests

This file contains the first set of tracer data for the EGS Collab testbed. The first set of tracer tests were conducted during October-November, 2018. We have included tracer data for C-dots, chloride, fluorescein, and rhodamine-B. The details about the tracer test can be found in Background and Methods of Tracer Tests (Mattson et al. (2019)) (also included in this package). References Mattson, E.D., Neupane, G., Plummer, M.A., Hawkins, A., Zhang, Y. and the EGS Collab Team 2019. Preliminary Collab fracture characterization results from flow and tracer testing efforts. In Proceedings 44th Workshop on Geothermal Reservoir Engineering, edited, Stanford University, Stanford, California.

15 GEOTHERMAL ENERGY↗

EGS Collab Testbed 1: Second Set Tracer Test Results

The EGS Collab project is developing ~10-20 m-scale field sites where fracture stimulation and flow models can be validated against controlled, small-scale, in-situ experiments. The first multi-well experimental site was established at the 4850 level in the Homestake Mine in Lead, South Dakota, where hydraulic fractures were created at an injection well drilled sub-horizontal from the drift. This file contains the second set of tracer data (also include the data uploaded previously, https://gdr.openei.org/submissions/1128) for the EGS Collab testbed. The tracer tests were conducted during October 2018 - November 2019. Injected tracers include DNA, C-dots (fluorescein nano particles), fluorescein, rhodamine-b, sodium chloride, lithium bromide and cesium iodine. The tracers have been detected in three flowing wells located about 7.5 to 9 meters away from the injection interval. The tracer breakthrough curves from these locations have been adjusted to account for the residence time in the injection and production tubing. The details about the tracer test can be found in Background and Methods of Tracer Tests (Mattson et al. (2019,a,b)) (also included in this package). References Mattson, E.D., Neupane, G., Plummer, M.A., Hawkins, A., Zhang, Y. and the EGS Collab Team 2019a. Preliminary Collab fracture characterization results from flow and tracer testing efforts. In Proceedings 44th Workshop on Geothermal Reservoir Engineering, edited, Stanford University, Stanford, California. Mattson, E.D., Neupane, G., Hawkins, A., Burghardt, J., Ingraham, M., Plummer, M., and the EGS Collab Team, 2019b. Fracture tracer injection response to pressure perturbations at an injection well. GRC Transactions, Vol. 43, 2019. Neupane, Ghanashyam, Earl Mattson, Adam Hawkins, Mitchell Plummer, and Yuran Zhang. EGS Collab Testbed 1: Tracer data sets. No. 1128. DOE Geothermal Data Repository; Idaho National Laboratory, 2019.

15 GEOTHERMAL ENERGY↗

Influence of calcination parameters on the synthesis of N-doped TiO{sub 2} by the polymeric precursors method

In this paper, the influence of calcination parameters on the synthesis of N:TiO{sub 2} catalysts obtained through the polymeric precursors method was evaluated. The powders were prepared by annealing Ti{sup 4+} precursor resins at different temperature-time conditions in air, resulting in powders with different degrees of crystallinity for N doping, which was done by adding urea to the as-prepared powders and calcining in N{sub 2} atmosphere. The N doping process resulted in band gap narrowing of TiO{sub 2} and, varying annealing temperature and time, can be an alternative method for preferential formation of substitutional N or interstitial N. It was found that the percentage of interstitial N increased with an increase in annealing temperature, resulting in the complete absence of substitutional N at 400 °C. The photocatalytic performance of the powders was evaluated using Rhodamine-B and Atrazine solutions under ultraviolet and visible irradiations. The coefficients revealed that interstitial N had a positive correlation to both ultraviolet and visible photoactivity. In contrast, substitutional N showed a negative correlation. Further, the ratio of substitutional N to interstitial N indicated a strong negative correlation to ultraviolet light photoactivity and no correlation to visible light photoactivity. However, substitutional N should be controlled for better photocatalytic properties. - Graphical abstract: The temperature influences to promote higher quantities of Interstitial N doped TiO{sub 2} than Substitutional and due to difference between energies levels for substitutional N doped TiO{sub 2} and Interstitial N doped TiO{sub 2}, it is presented difference on photocatalytic activity. - Highlights: • Temperature and time of synthesis of N doping TiO{sub 2} could affect the type of N (interstitial and substitutional N). • The percentage of interstitial N increased with an increase in annealing temperature. • Interstitial N improves ultraviolet and visible light degradation of color and colorless substrates (Rhod and Atraz). • Visible photoactivity may not depend only on band gap narrowing but on several factors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shape evolution of Eu-doped Bi{sub 2}WO{sub 6} and their photocatalytic properties

Highlights: • Hydrothermal synthesis of Eu-doped Bi{sub 2}WO{sub 6} micro/nanostructure without any additives. • Dopant and doping level affect the shape evolution and photocatalytic activities. • Eu-doped Bi{sub 2}WO{sub 6} exhibit superior photocatalytic activity in degradation of RhB. - Abstract: Europium-doped bismuth tungstate (Eu-doped Bi{sub 2}WO{sub 6}) was synthesized via hydrothermal method. The composition, structure, and microstructure of the products were characterized by X-ray diffraction and scanning electron microscopy. Depending on the doping level, nanoflakes and 3D hierarchical microspheres were formed. The photocatalytic activities of all products obtained were evaluated by the degradation of Rhodamine-B under visible light irradiation. A substantially improved photocatalytic performance of Eu-doped Bi{sub 2}WO{sub 6} is achieved. This study demonstrates a simple method that could produce stable photocatalysts with greatly enhanced performance.

36 MATERIALS SCIENCE↗

A novel Bi-based oxybromide SrBiO{sub 2}Br: Synthesis, optical property and photocatalytic activity

Highlights: • SrBiO{sub 2}Br was first explored as a novel photocatalyst. • SrBiO{sub 2}Br has been successfully synthesized by a solid state reaction. • We systematically synthesized SrBiO{sub 2}Br in different temperature. • SrBiO{sub 2}Br calcinated at 700 °C exhibited the highest photocatalytic activity. - Abstract: A novel Bi-based photocatalyst SrBiO{sub 2}Br with layered structure was successfully synthesized via a solid state reaction method. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV–vis diffuse reflectance spectra (DRS). SrBiO{sub 2}Br has an indirect-transition optical band-gap of 2.58 eV. Density functional calculations revealed that conduction band (CB) were composed of the Bi 6p and Br 4s orbitals, and valence band (VB) were occupied by Br 4p and O 2p. The photodecomposition of rhodamine-B (RhB) experiments demonstrated SrBiO{sub 2}Br can be used as photocatalysts under ultraviolet (UV) light and visible light irradiation (λ > 400 nm). The results revealed that SrBiO{sub 2}Br calcinated at 700 °C exhibited the highest photocatalytic activity among the obtained SrBiO{sub 2}Br samples.

36 MATERIALS SCIENCE↗

Synthesis and structure of a new layered oxyfluoride Sr{sub 2}ScO{sub 3}F with photocatalytic property

Highlights: • A new oxyfluoride compound Sr{sub 2}ScO{sub 3}F was prepared by a solid state route. • The structure of this compound was determined by GSAS program based on XRD data. • The photocatalytic property was investigated under UV irradiation. - Abstract: A new Ruddlesden–Popper type scandium oxyfluoride, Sr{sub 2}ScO{sub 3}F, was synthesized by a conventional solid state reaction route. The detailed structure of Sr{sub 2}ScO{sub 3}F was investigated using X-ray diffraction (XRD) and selected area electron diffraction (SAED). The disorder distribution pattern of fluorine anions was determined by the {sup 19}F nuclear magnetic resonance (NMR) spectrum. The compound crystallizes in a K{sub 2}NiF{sub 4}-type tetragonal structure (space group I4/mmm) with O/F anions disordered over the apical sites of the perovskite-type Sc(O,F){sub 6} octahedron layers interleaved with strontium cations. Ultraviolet–visible (UV–vis) diffuse reflection spectrum of the prepared Sr{sub 2}ScO{sub 3}F indicates that it has an absorption in the UV–vis region. The photocatalytic activity of Sr{sub 2}ScO{sub 3}F was further investigated, showing an effective photodegradation of Rhodamine-B (RB) within 2 h under UV light irradiation.

36 MATERIALS SCIENCE↗

Mo-N-co-doped mesoporous TiO{sub 2} microspheres with enhanced visible light photocatalytic activity

Highlights: • The Mo-N-co-doped mesoporous TiO{sub 2} microspheres were synthesized via a solvothermal method and further nitriding treatment. • The properties of TiO{sub 2} microspheres can be tuned by Mo-N-co-doping. • Photocatalytic rate is much higher than Pure TiO{sub 2} catalyst powder and Mo doped TiO{sub 2} microspheres. • The higher activity is attributed to the large BET surface area, narrow band gap and intense light absorbance in visible region. - Abstract: Mo-N-co-doped mesoporous TiO{sub 2} microspheres were synthesized via a solvothermal method, followed by nitriding treatment under ammonia gas flow. The efficiency of the samples was investigated by monitoring the degradation of Rhodamine-B under visible light irradiation. The experimental results revealed that Mo-N-co-doped mesoporous TiO{sub 2} microspheres showed better performances than Mo-TiO{sub 2} microspheres. It was observed that; 0.1% molar quantity of Mo doped on TiO{sub 2} at 500 °C for 2 h under nitriding conditions gave highest photocatalytic activities. The nitridation under ammonia gas of Mo-TiO{sub 2} samples created oxygen vacant sites and led to incorporation of substitutional and interstitial Nitrogen. The enhanced visible light photocatalytic activities of Mo-N-co-doped TiO{sub 2} photocatalyst was attributed to the large surface areas, narrow band gap and intense light absorbance in visible region. This study may create a promising and eco-friendly method towards synthesis of metal and non-metals co-doped on semiconductor materials to improve their photocatalytic activities and applications.

36 MATERIALS SCIENCE↗

Preparation and optical properties of Bi2FeVMoO10 nanoparticles structurally derived from cation-substitutions in Scheelite-type BiVO4

Highlights: • Bi{sub 2}FeVMoO{sub 10} with Scheelite structure was synthesized by co-precipitation. • The structural Rietveld refinement was finished. • The nanoparticles (50–80 nm) show high absorption in UV-vis region (E{sub g} = 2.07 eV). • Photocatalysis of Bi{sub 2}FeVMoO{sub 10} was markedly enhanced than BiVO{sub 4} and Bi{sub 2}Mo{sub 3}O{sub 12}. • The mechanism of this photocatalysis system was proposed. - Abstract: Bi{sub 2}FeVMoO{sub 10} [(Bi{sub 0.8}Fe{sub 0.4})(Mo{sub 0.4}V{sub 0.4})O{sub 4}] was prepared via facile co-precipitation route. It has a tetragonal Scheelite structure derived by cation substitutions in monoclinic BiVO{sub 4}. Rietveld refinements of Bi{sub 2}FeVMoO{sub 10} were performed in body-centered tetragonal Scheelite. The morphological property was tested via SEM, EDX, and TEM measurements. The optical property was measured by UV-vis absorption spectrum. Bi{sub 2}FeVMoO{sub 10} shows a narrower band gap of 2.07 eV than the monoclinic BiVO{sub 4} and α-Bi{sub 2}Mo{sub 3}O{sub 12}. The photo-degradation experiments of Rhodamine-B (RhB) dye solutions were conducted. Bi{sub 2}FeVMoO{sub 10} nanoparticles have more efficient photocatalytic ability on RhB degradation than that of BiVO{sub 4} and α-Bi{sub 2}Mo{sub 3}O{sub 12}. The results were discussed on the Scheelite structure characteristics such as complicated optical absorption centers, loose space in the lattice because of the vacancies, large dispersion in the CB and VB electronic components and the Fe{sup 3+}/Fe{sup 2+} redox couples. This multicomponent Scheelite oxide could have potential applications in environment protection.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Manipulating light propagation and emission using photonic crystals

We discuss the synthesis and characterization of self-assembled photonic crystals using polymer colloids having sub-micron diameters. The angle resolved optical reflectivity measurements indicate the hybridization between stop gaps in the multiple Bragg diffraction regimes. Each diffraction resonances in the multiple Bragg diffraction regimes are assigned to respective crystal planes. We also discuss laser-induced studies of spontaneous emission in self-assembled photonic crystals having Rhodamine-B dye doped colloids. Our experimental results reveal more than 51% inhibition in emission intensity within the stop gap as compared to a proper reference sample.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of the deposition features of the organic dye Rhodamine B on the porous surface of silicon with different pore sizes

The deposition features of the organic dye Rhodamine B on the porous surface of silicon with average pore sizes of 50–100 and 100–250 nm are studied. Features of the composition and optical properties of the obtained systems are studied using infrared and photoluminescence spectroscopy. It is found that Rhodamine-B adsorption on the surface of por-Si with various porosities is preferentially physical. The optimal technological parameters of its deposition are determined.

36 MATERIALS SCIENCE↗

Feasibility study for rocket ozone measurements in the 50 to 80 km region using a chemiluminescent technique

A study has been conducted to determine the feasibility of increasing sensitivity for ozone detection. The detection technique employed is the chemiluminescent reaction of ozone with a rhodamine-B impregnated disk. Previously achieved sensitivities are required to be increased by a factor of about 20 to permit measurements at altitudes of 80 km. Sensitivity was increased by using a more sensitive photomultiplier tube, by increasing the gas velocity past the disk, by different disk preparation techniques, and by using reflective coatings in the disk chamber and on the uncoated side of the glass disk. Reflective coatings provided the largest sensitivity increase. The sum of all these changes was a sensitivity increased by an estimated factor of 70, more than sufficient to permit measurement of ambient ozone concentrations at altitudes of 80 km.

Goodman, P.↗

A Cost-effective Satellite-aircraft-drogue Approach for Studying Estuarine Circulation and Shelf Waste Dispersion

The author has identified the following significant results. Satellites, such as ERTS-1, can be used to obtain a synoptic view of current circulation over large coastal areas. Since in turbid coastal regions suspended sediment acts as a natural tracer, cost is minimized by eliminating the need for expensive injections of large volumes of dye such as Rhodamine-B. One of the principal shortcomings of satellite imaging of coastal currents was its inability to determine current magnitude and to penetrate beyond the upper few meters of the water column. These objections were overcome by complementing satellite observations with drogues tracking currents at various selected depths. By combining the satellite's wide coverage with aircraft or shore stations capable of tracking expendable drogues, a cost effective, integrated system was devised for monitoring currents over large areas, various depths, and under severe environmental conditions.

Klemas, V.↗