Search NASA⌕ Search

SEARCH · Search NASA

Results for “rock finding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Fabric controls on fracture surface roughness of an architected rock material

Fluid flow through fractures is intimately linked to the fracture surfaces that define the void geometry through which fluids flow. Thus, an understanding of what controls fracture surface roughness is essential to the development of models for predicting fluid transport through fractured rock. The difficulty in predicting surface roughness arises from the complexity of rock which is inherently heterogeneous and nonuniform in composition, fabric, and structural components, even when samples are acquired from the same rock mass. Here, a benchmarked-simulation approach motivated from geo-architected 3D printed synthetic gypsum rocks is used to provide insight into the competing contributions from fabric and layering on fracture roughness formation. Simulation results from a discrete element model (Particle Flow Code, Itasca Consulting Group, Inc.) clearly indicate that the relative orientation between mineral layers and in-layer mineral fabric, and the variability in mineral bonding strengths determine whether anisotropic corrugated surfaces or isotropic surfaces are formed. Weak mineral layers oriented perpendicular to the applied load resulted in strong roughness anisotropy. Peak failure loads were found to vary up to 30% depending on the strength of the mineral fabric at the location of fracture initiation, which provides insight into the observed high variability in strength values of natural rock. The uniqueness of induced fracture roughness and peak failure load is intimately linked to layering, mineral fabric, and their distribution in the rock. These findings have important implications for any architected material fabricated through serial printing of layers with local compositional heterogeneity.

3D printed rock↗
DOE OSTI2025

Climatic controls on erosional efficiency vary with lithology across the Himalaya

Although climate can strongly influence erosional efficiency (i.e., erosion rate for a given topography), demonstrating its impact in tectonically active areas has been challenging due to other confounding controlling factors, such as lithology. Here, we show that 10 Be-derived erosion rates and efficiencies in the Himalayan orogen exhibit distinct relationships with climatic factors depending on lithology. We compile 173 10 Be-derived, basin-averaged erosion rates across the orogen, including 12 newly measured rates from the Dibang and Lohit valleys in the easternmost Himalaya, regions characterized by high precipitation magnitudes and variability. We group basins based on lithologies separated by orogen-scale thrust faults and quantify erosional efficiency coefficients based on the relationships between erosion rates and topographic metrics. Our results show that erosion rates and erosional efficiency from sedimentary and metasedimentary rocks along the Himalayan range front display a positive, nonlinear correlation with climatic factors, such as the number of extreme rainfall events and mean annual precipitation rates. In contrast, erosion rates from crystalline lithologies in the hanging wall of the Main Central thrust show a strong correlation with fluvial topography, whereas erosional efficiency shows no statistically significant correlation with climatic factors. Rapid erosion rates and high erosional efficiencies in the eastern Himalayan range front are likely driven by extreme precipitation on tectonically active, steep slopes composed of mechanically weak metasedimentary rocks. Our findings highlight the importance of the interplay between controlling factors, which include tectonics, lithology, and climate, that drive surface erosion and influence the topographic evolution of orogenic systems.

Channel steepness↗
DOE OSTI2020

A viscoelastic model for seismic attenuation using fractal mechanical networks

SUMMARY Seismic attenuation (quantified by the quality factor Q) has a significant impact on the seismic waveforms, especially in the fluid-saturated rocks. This dissipative process can be phenomenologically represented by viscoelastic models. Previous seismological studies show that the Q value of Earth media exhibits a nearly frequency-independent behaviour (often referred to as constant-Q in literature) in the seismic frequency range. Such attenuation can be described by the mathematical Kjartansson constant-Q model, which lacks of a physical representation in the viscoelastic sense. Inspired by the fractal nature of the pore fluid distribution in patchy-saturated rocks, here we propose two fractal mechanical network (FMN) models, that is, a fractal tree model and a quasi-fractal ladder model, to phenomenologically represent the frequency-independent Q behaviour. As with the classic viscoelastic models, the FMN models are composed of mechanical elements (spring and dashpots) arranged in different hierarchical patterns. A particular parametrization of each model can produce the same complex modulus as in the Kjartansson model, which leads to the constant-Q. Applying the theory to several typical rock samples, we find that the seismic attenuation signature of these rocks can be accurately represented by either one of the FMN models. Besides, we demonstrate that the ladder model in particular exhibits the realistic multiscale fractal structure of the saturated rocks. Therefore, the FMN models as a proxy could provide a new way to estimate the microscopic rock structure property from macroscopic seismic attenuation observation.

Geochemistry & Geophysics↗
DOE OSTI2021

Rock weathering controls the potential for soil carbon storage at a continental scale

Abstract As rock-derived primary minerals weather to form soil, they create reactive, poorly crystalline minerals that bind and store organic carbon. By implication, the abundance of primary minerals in soil might influence the abundance of poorly crystalline minerals, and hence soil organic carbon storage. However, the link between primary mineral weathering, poorly crystalline minerals, and soil carbon has not been fully tested, particularly at large spatial scales. To close this knowledge gap, we designed a model that links primary mineral weathering rates to the geographic distribution of poorly crystalline minerals across the USA, and then used this model to evaluate the effect of rock weathering on soil organic carbon. We found that poorly crystalline minerals are most abundant and most strongly correlated with organic carbon in geographically limited zones that sustain enhanced weathering rates, where humid climate and abundant primary minerals co-occur. This finding confirms that rock weathering alters soil mineralogy to enhance soil organic carbon storage at continental scales, but also indicates that the influence of active weathering on soil carbon storage is limited by low weathering rates across vast areas.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Fracture Intensity Impacts on Reaction Front Propagation and Mineral Weathering in Three‐Dimensional Fractured Media

Abstract Studying reaction front propagation in heterogeneous natural settings is challenging, but numerical simulations can provide insight into the varying spatial and temporal scales of reaction front propagation. Here, the impact of increasing fracture intensity on mineral dissolution rates, and the extent of reaction front propagation is investigated using reactive transport simulations in upscaled discrete fracture network domains with varied fracture intensity. Domain‐averaged dissolution rates vary less than 0.5 log units regardless of the fracture intensity, but the spatial distribution of reactions is controlled by the location and number of dead‐end fractures and the number of connected flowpaths through the domain. Higher fracture intensities lead to more weathering in the domain because of more available mineral for water‐rock interactions. We find that reaction fronts propagate through the primary flowpaths in the first 10,000 years of the simulation for a 10‐m length domain, then propagate into secondary flowpaths and dead‐end fractures between 10,000 and 100,000 years, and finally into the matrix over timescales of hundreds of thousands of years. The domain‐averaged reaction rates decrease through time corresponding to a transition from dissolution in advection‐dominated, fast‐flowing pathways, to dissolution in transport‐limited zones of disconnected fractures and matrix. Matrix dissolution, or dissolution under transport‐limited conditions, is the dominant process at late times in these simulations. The results of these simulations recreate the observed paradox found in nature where highly fractured hillslopes tend to be more weathered but have slower weathering rates, while hillslopes with fewer fractures, are less weathered but have higher dissolution rates.

58 GEOSCIENCES↗
DOE OSTI2023

Understanding Subsurface Fracture Evolution Dynamics Using Time‐Lapse Full Waveform Inversion of Continuous Active‐Source Seismic Monitoring Data

Abstract Predicting the behavior, geometry, and flow properties of subsurface fractures remains a challenging problem. Seismic models that can characterize fractures usually suffer from low spatiotemporal resolution. Here, we develop a correlative double‐difference time‐lapse full waveform inversion of continuous active source seismic monitoring data for determining high‐spatiotemporal‐resolution time‐lapse V p models of in‐situ fracture evolution at a shallow contamination site in Wyoming, USA. Assisted by rock physics modeling, we find that (a) rapidly increasing pore pressure initializes and grows the fracture, increasing the porosity slightly (from ∼13.7% to ∼14.6%) in the tight clay formation, thus decreasing V p (∼50 m/s); (b) the fluid injection continues decreasing V p , likely through the introduction of gas bubbles in the injectate; and (c) final V p reductions reach over ∼150 m/s due to a posited ∼4.5% gas saturation. Our results demonstrate that high‐resolution V p changes are indicative of mechanical and fluid changes within the fracture zone during hydrofracturing.

58 GEOSCIENCES↗
DOE OSTI2023

Radiolytically reworked Archean organic matter in a habitable deep ancient high-temperature brine

Abstract Investigations of abiotic and biotic contributions to dissolved organic carbon (DOC) are required to constrain microbial habitability in continental subsurface fluids. Here we investigate a large (101–283 mg C/L) DOC pool in an ancient (>1Ga), high temperature (45–55 °C), low biomass (10 2 −10 4 cells/mL), and deep (3.2 km) brine from an uranium-enriched South African gold mine. Excitation-emission matrices (EEMs), negative electrospray ionization (–ESI) 21 tesla Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS), and amino acid analyses suggest the brine DOC is primarily radiolytically oxidized kerogen-rich shales or reefs, methane and ethane, with trace amounts of C 3 –C 6 hydrocarbons and organic sulfides. δ 2 H and δ 13 C of C 1 –C 3 hydrocarbons are consistent with abiotic origins. These findings suggest water-rock processes control redox and C cycling, helping support a meagre, slow biosphere over geologic time. A radiolytic-driven, habitable brine may signal similar settings are good targets in the search for life beyond Earth.

Science & Technology - Other Topics↗
DOE OSTI2021

Source Physics Experiment: Rock Valley Interferometric Synthetic Aperture RADAR Earthquake Detection Study

Seismic signals from 1993 show a series of magnitude (Mw) 3.7 or less seismic events in Rock Valley on the Nevada National Security Site (NNSS). Historic synthetic aperture radar images of that location were found that could provide interferometric synthetic aperture radar (InSAR) measures of the ground height during 1993. Given this historic SAR imagery, we explore answering the question if ground movement from the 1993 Rock Valley earthquake activity could be sensed by remote sensing means. Finding earthquake surface movement would assist in locating the Rock Valley fault and the 1993 earthquake hypocenter where the Source Physics Experiment Phase III series of experiments will be conducted. In this report, we show that InSAR can sense very small height differences, and for the European Radar Satellite-1 InSAR collections during 1992 and 1993 over Rock Valley earth surface movements were measured with 8 mm uplift and 12.5 mm subsidence over isolated areas. One of these earth movement areas coincides with an InSAR image pair coherence drop between March 5, 1993 and June 18, 1993. The coherence drop is over an approximately 13 square km area south southeast of Skull Mountain centered at 36° 43' 30" N latitude and 116° 05' 00" W longitude. Measured small surface movement and a loss of InSAR coherence may be caused by the series of earthquakes. The location of these InSAR detections may also coincide with water drainage or erosion displacement. There are no records to disambiguate the earthquake and erosion earth surface motion possibilities. Therefore, the InSAR findings of earth surface movement by InSAR are inconclusive.

58 GEOSCIENCES↗
DOE OSTI2020

Shifting modes of iron sulfidization at the onset of OAE-2 drive regional shifts in pyrite δ 34 S records

We report total reduced inorganic S isotope ratios (δ 34 S CRS ) shift toward more negative values across much of the southern North Atlantic just before the onset of the Cenomanian-Turonian Ocean Anoxic Event (OAE-2). At the same time, there is no parallel isotopic change in the significantly larger pool of kerogen (organic) S, which indicates that the distribution and S-isotope composition of sulfide in the environment likely did not drive the change in δ 34 S CRS . Here, we investigate possible explanations for the negative shift in δ 34 S CRS values and their divergence from organic S by isolating iron sulfides for morphological identification and grain-specific isotopic analysis using secondary ion mass spectrometry (SIMS). In pre- and syn-OAE-2 sedimentary rocks from Demerara Rise, we find four distinct morphologies of iron sulfides: pyrite framboids (1–20 μm diameter), irregular pyrite aggregates (1–38 μm diameter), large cemented pyrite aggregates (~60 μm diameter), and irregular and cemented aggregates of the pyrite polymorph marcasite (1–45 μm diameter). These different textural groups have distinct S-isotopic compositions that are largely consistent through the onset of OAE-2. As such, the secular change in bulk δ 34 S CRS values likely reflects the changing proportions of these phases stratigraphically across OAE-2. All textural groups feature resolvable intra-grain δ 34 S variability, suggesting that the environments in which they formed were characterized by dynamic sulfide δ 34 S values and/or by partial closed-system distillation. We use grain-specific δ 34 S distributions to rule out shoaling of the chemocline within the sediments as a mechanism for the observed decrease in δ 34 S CRS . Instead, we propose that changes in the reactivity of the iron species delivered to Demerara Rise over the ~200 kyr leading up to the onset of OAE-2 impacted the relative contributions of pyrite with S-isotope signatures reflecting the water column, shallow sediments, and deeper sediments to the bulk sedimentary δ 34 S CRS value. Specifically, the change in iron reactivity at the onset of OAE-2 favored the production of 34 S-depleted large, cemented aggregates and framboids at the expense of more 34 S-enriched irregular aggregates. Our results underscore that bulk δ 34 S CRS measurements integrate multiple reduced phases that form via distinct reaction mechanisms and potentially in different parts of the depositional environment. Grain-specific SIMS analyses dramatically enrich our ability to interpret pyrite isotopic patterns in the geologic record.

58 GEOSCIENCES↗
DOE OSTI2020

High-Performance Titanium Oxynitride Thin Films for Electrocatalytic Water Oxidation

TiN x O y (TiNO) thin films with superior electrochemical properties have been synthesized in situ using a pulsed laser deposition method and a varied oxygen partial pressure from 5 to 25 mTorr. In this study, the electrochemical overpotential of these TiNO films for water oxidation was found to be as low as 290 mV at 10 mA/cm 2 , which is among the lowest overpotential values reported. The Tafel slopes, indicative of a rate of increase of electrode potential with respect to current, for these films are determined to be in the range of 85–57 mV/decade. These results further demonstrate the superiority of TiNO thin film as electrocatalyst for water oxidation to generate fossil-free fuels. The improvement in the electrocatalytic behavior of the semiconducting TiNO thin films is explained based on an adjustment in the valence band maximum edge and an enhancement in the number of electrochemically active sites. Both effects are realized by the substitution of N by O, forming a TiNO lattice that is isostructural with the rock-salt TiN lattice. These findings appear to assume significant importance in light of water electrolysis to produce fuels for the development of environmentally friendly power sources.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Evolving physical and mechanical rock properties during exposure at Earth's surface

Rocks at Earth's surface experience progressive damage due to exposure to environmental conditions. Although environmental damage to rocks is recognized as being time-dependent, our quantitative understanding of its effects on physical and mechanical properties remains limited by field and laboratory studies constrained to short timescales. In this study, we aim to rigorously quantify how these properties evolve under longer natural environmental exposure spanning from the Holocene to the late Pleistocene. We conducted a ‘time series’ analysis of key physical and mechanical rock properties using multiple interior samples from 10 cogenetic granitoid boulders exposed for different amounts of time at two sites in Eastern California, USA. We find that over the late Pleistocene (~30 ka), rocks exhibit porosity increases of 40 ± 4 % and seismic velocity decreases of 7 ± 1 % at both sites. Similarly, over the same time period, rock tensile and compressive strengths declined by an average of 11 ± 4 %, and rock permeability increased on average by 104 ± 50 %. Microscopic analysis of thin sections of the same rocks indicates that microfracture density and intensity also progressively increased over the same timescales. These results suggest that time-dependent fracture propagation due to environmental exposure is likely a central contributor to the observed changes in rock properties. This study provides quantitative documentation that pronounced changes in the physical and mechanical properties of rock progressively occur within thousands of years of exposure.

Critical zone↗
DOE OSTI2025

Kinetically Dormant Ni‐Rich Layered Cathode During High‐Voltage Operation

Abstract The degradation of Ni‐rich cathodes during long‐term operation at high voltage has garnered significant attention from both academia and industry. Despite many post‐mortem qualitative structural analyses, precise quantification of their individual and coupling contributions to the overall capacity degradation remains challenging. Here, by leveraging multiscale synchrotron X‐ray probes, electron microscopy, and post‐galvanostatic intermittent titration technique, the thermodynamically irreversible and kinetically reversible capacity loss is successfully deconvoluted in a polycrystalline LiNi 0.83 Mn 0.1 Co 0.07 O 2 cathode during long‐term charge/discharge cycling in full cell configuration. Contradicting the dramatic capacity loss, the layered structure remains highly alive even after 1000 cycles at 4.6 V while undergoing a three‐order of magnitude reduction in the mass transfer kinetics, leading to almost fully recoverable capacity under kinetic‐free conditions. Such kinetic dormant behavior after cycling is not simply ascribed to poor chemical diffusion by reconstructed cathode surface but highly synchronizes with the lattice strain evolution stemming from the structural heterogeneity between deeply delithiated layered and degraded rock‐salt phases at high voltage. These findings deepen the degradation mechanism of high‐voltage cathodes to achieve long‐cycling and fast‐charging performance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The impact of regional resources and technology availability on carbon dioxide removal potential in the United States

To achieve net zero carbon emissions by mid-century, the United States may need to rely on carbon dioxide removal (CDR) to offset emissions from difficult-to-decarbonize sectors and/or shortfalls in near-term mitigation efforts. CDR can be delivered using many approaches with different requirements for land, water, geologic carbon storage capacity, energy, and other resources. The availability of these resources varies by region in the U.S. suggesting that CDR deployment will be uneven across the country. Using the global change analysis model for the United States (GCAM-USA), we modeled six classes of CDR and explored their potential using four scenarios: a scenario where all the CDR pathways are available (Full Portfolio), a scenario with restricted carbon capture and storage (Low CCS), a scenario where the availability of bio-based CDR options is limited (Low Bio), and a scenario with constraints on enhanced rock weathering (ERW) capabilities (Low ERW). We find that by employing a diverse set of CDR approaches, the U.S. could remove between 1 and 1.9 GtCO 2 /yr by midcentury. In the Full Portfolio scenario, direct air carbon capture and storage (DACCS) predominates, delivering approximately 50% of CO 2 removal, with bioenergy with carbon capture and storage contributing 25%, and ERW delivering 11.5%. Texas and the agricultural Midwest lead in CDR deployment due to their abundant agricultural land and geological storage availability. In the Low CCS scenario, reliance on DACCS decreases, easing pressure on energy systems but increasing pressure on the land. In all cases CDR deployment was found to drive important impacts on energy, land, or materials supply chains (to supply ERW, for example) and these effects were generally more pronounced when fewer CDR technologies were available.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Investigating Material Properties of Subsurface Rock Formations Modified by Engineering Mineral Precipitation (Final Scientific and Technical Report)

Montana State University’s (MSU) Energy Research Institute (ERI), in collaboration with the Center for Biofilm Engineering (CBE) and the Department of Civil Engineering (CE), has conducted a long‐term research program aimed at developing a novel cementing agent to address wellbore integrity and reduce the unwanted upward migration of fluids and greenhouse gases from the subsurface. The primary technology developed through this research program is known as ureolysis‐induced calcite precipitation (UICP), which harnesses bio‐chemical processes to precipitate calcium carbonate (CaCO 3 ). The same general process can also be called microbially-induced calcium carbonate precipitation (MICP) when microbes provide the process-catalyzing urease enzyme. Both terms are used in this report. Results have conclusively demonstrated that, if properly controlled, UICP can successfully seal fractures, high permeability zones, and compromised cement in the vicinity of wellbores and in nearby caprock. This technology has been successfully deployed to mitigate annular leakage in two test wells and over sixty commercial wells with a 100% success rate. This success in downhole deployment generates consideration of other subsurface applications where UICP could provide benefit to the energy sector, such as shale property modification for unconventional oil and gas recovery. The focus of this research project was to investigate fundamental material and mechanical properties of select shale cores and analyze how these properties change due to engineered mineral precipitation with the intent to control these properties to achieve a range of engineering objectives. Ultimately, the project aim was to identify valuable new areas where application of UICP might contribute to national energy security and environmental protection. The research workplan coupled UICP treatment of core samples, nuclear magnetic resonance (NMR) characterization, and mechanical strength testing at MSU with advanced X‐Ray micro-computed tomography (μCT) imaging and numerical modeling performed by collaborators at two national laboratories, the National Energy Technology Laboratory (NETL) and Lawrence Berkeley National Laboratory (LBNL). Experimental results are useful to inform geo-mechanical models which could be applied to predict mineralized rock formation behavior at field scale. Our findings suggest that NMR and μCT methods to detect and quantify biomineral formation in shale fractures are complementary and consistent with each other. Either could be used to estimate the volume of new mineral formed by UICP in shale fractures. The use of surfactants and guar gum to enhance biomineral precipitation in shale fractures merits further research. UICP can, under some conditions, increase the tensile strength of sealed shale fractures beyond that of the intact shale. These findings demonstrate that continued research in this area may be valuable to understanding and improving shale resource recovery techniques.

58 GEOSCIENCES↗
DOE OSTI2021

Stress analysis using direct-S wavelets produced by a vertical vibrator

We have determined how to extract the azimuth of maximum horizontal stress (SHmax) in deep rocks by doing a simple 360° mathematical rotation of a downgoing direct-S wavelet generated at the baseplate of a surface-based vertical vibrator. We worked with direct-S wavelets that travel through stressed rocks to a deep horizontal vertical seismic profile (VSP) geophone. We find that the azimuth where a polarity reversal occurs in mathematical rotations of this downgoing direct-S wavelet defines the azimuth of the SHmax in the overlying rocks. We tested this direct-S wavelet rotation method for determining the SHmax azimuth at a site in the Illinois Basin using legacy VSP data acquired in 2013. SHmax azimuths indicated by this simple wavelet-rotation method were determined when vertical vibrators were stationed at zero offset, at far offset, and at different azimuths around a VSP receiver well. These VSP-based SHmax azimuths agreed with the azimuth of the SHmax found by traditional minifrac tests in the VSP receiver well. This simple VSP data analysis procedure for detecting the azimuth of maximum horizontal stress has never, to our knowledge, been reported or discussed in the geophysical literature. This technical finding should be of interest to the worldwide geophysical community, especially to people who need to monitor how stress fields shift when fluids are injected into, or extracted from, deep porous reservoirs.

Geochemistry & Geophysics↗
DOE OSTI2024

Geophysical Signatures of Crack Network Coalescence in Rocks at Multiple Length Scales

The main goal of the research project was to identify the geophysical signatures of fracture growth in natural rocks by utilizing novel geophysical techniques. The research objectives were to (a) investigate the potential for geophysical methods to determine when cracks initiate, the types and locations of propagated cracks, and the coalescence of networks of cracks in natural rocks at multiple scales, (b) determine how damage at the microscale evolved into damage at the macroscale and then link the microscopic and macroscopic observations, (c) quantify crack coalescence in rocks under realistic stress conditions using coupled mechanical-geophysical-optical visualization, and (d) identify the precursors in geophysical signals to crack coalescence. The following research thrusts were explored to achieve the research objectives: (1) uniaxial compression testing of rock specimens with and without a set of pre‐existing flaws and (2) triaxial compression testing of natural rock specimens. These thrusts allowed for exploring fracturing in rocks under realistic in situ environments and at multiple scales. This project provided educational opportunities for nine graduate and undergraduate students and resulted in 27 peer-reviewed publications. This first research thrust focused on investigating the micromechanics of fractures in rocks through uniaxial compression testing combined with advanced geophysical and imaging techniques, specifically acoustic emission (AE) monitoring, ultrasonic imaging, and 2-dimensional Digital Image Correlation (2D-DIC). By examining damage processes under time-independent and time-dependent loading conditions, insights into damage localization, crack initiation, and fracturing mechanisms were gained. It was observed that the AE signals and the strain-based measurements directly reflect the state of damage in the rock specimen and could be used to identify the cracking levels, such as the crack initiation (CI) and crack damage (CD), and the mode of deformation. A novel calibration apparatus was developed to enhance the accuracy of AE sensors, allowing for the estimation of key parameters such as magnitude, source dimension, stress drop, and radiated seismic energy associated with the fractures. The findings highlighted significant variations in the temporal evolution of AE source parameters during the primary, secondary, and tertiary stages of creep, identifying tensile cracking as the primary deformation mode. The second research thrust focused on enhancing the understanding of fracturing processes in natural rocks through triaxial compression testing, real-time AE monitoring, and ultrasonic monitoring. We investigated the impact of various factors such as fracture propagation regimes, injection parameters, rock types, and pre-existing conditions on the hydraulic fracture (HF) behavior using scaled true-triaxially loaded specimens of Barre granite and Lyons sandstone. Custom sensor housing facilitated concurrent active and passive monitoring to analyze hydro-mechanical responses and microseismicity associated with different HF scenarios. A coupled investigation of passive microseismicity and active signal attributes permitted a detailed comprehension of the various HF processes (aseismic deformation, fracture initiation and propagation, fluid permeation, and leak-off) and their dependence on the specific rock type. The findings of this research demonstrated the effectiveness of AE monitoring techniques in providing valuable insights into the impact of various factors on the behavior and dynamics of HF processes. The advancements in monitoring techniques, offering a more thorough and precise approach, represent a significant step towards optimizing HF practices and ensuring sustainable resource extraction.

58 GEOSCIENCES↗
DOE OSTI2023

Redox and mineral controls on Fe and Ti isotopic fractionations during calc-alkaline magmatic differentiation

Titanium and Fe isotopic compositions of lavas from a calc-alkaline differentiation suite and corresponding mineral separates from the Rindjani Volcano, Indonesia show that Fe and Ti isotopic fractionations between minerals and melts are lower than those recorded in other suites at all stages of differentiation. Here, the limited isotopic fractionation for Ti is likely due to low-Ti magnetite and clinopyroxene being the dominant carriers of Ti in Rindjani lavas, as these minerals are thought to have limited equilibrium Ti isotopic fractionation relative to silicate magmas. Other magmatic differentiation suites controlled by removal of Ti-rich magnetite and characterized by a lesser role of clinopyroxene have larger Ti isotopic fractionations. This effect is an indirect consequence of the elevated Fe 3+ /Fe 2+ ratio of calc-alkaline magmas such as Rindjani, which promotes Fe 3+ incorporation into magnetite at the expense of Fe 2+ -Ti 4+ pairs, such that increased oxygen fugacity will subdue Ti isotopic fractionation in global magmatic series. Similarly, we find negligible Fe isotopic fractionation in Rindjani bulk rocks and mineral separates, unlike previous studies. This is also likely due to the oxidized nature of the Rindjani differentiation suite, which leads to similar Fe 3+ /Fe 2+ ratios in melt and minerals and decreases overall mineral-melt Fe fractionation factors. Paired Ti and Fe isotopic analyses may therefore represent a powerful tool to assess oxygen fugacity during differentiation, independent from Fe 3+ determinations of erupted samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗