Search NASA⌕ Search

SEARCH · Search NASA

Results for “roden”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Analysis of Ultra High Resolution Sea Surface Temperature Level 4 Datasets

Sea surface temperature (SST) studies are often focused on improving accuracy, or understanding and quantifying uncertainties in the measurement, as SST is a leading indicator of climate change and represents the longest time series of any ocean variable observed from space. Over the past several decades SST has been studied with the use of satellite data. This allows a larger area to be studied with much more frequent measurements being taken than direct measurements collected aboard ship or buoys. The Group for High Resolution Sea Surface Temperature (GHRSST) is an international project that distributes satellite derived sea surface temperatures (SST) data from multiple platforms and sensors. The goal of the project is to distribute these SSTs for operational uses such as ocean model assimilation and decision support applications, as well as support fundamental SST research and climate studies. Examples of near real time applications include hurricane and fisheries studies and numerical weather forecasting. The JPL group has produced a new 1 km daily global Level 4 SST product, the Multiscale Ultrahigh Resolution (MUR), that blends SST data from 3 distinct NASA radiometers: the Moderate Resolution Imaging Spectroradiometer (MODIS), the Advanced Very High Resolution Radiometer (AVHRR), and the Advanced Microwave Scanning Radiometer ? Earth Observing System(AMSRE). This new product requires further validation and accuracy assessment, especially in coastal regions.We examined the accuracy of the new MUR SST product by comparing the high resolution version and a lower resolution version that has been smoothed to 19 km (but still gridded to 1 km). Both versions were compared to the same data set of in situ buoy temperature measurements with a focus on study regions of the oceans surrounding North and Central America as well as two smaller regions around the Gulf Stream and California coast. Ocean fronts exhibit high temperature gradients (Roden, 1976), and thus satellite data of SST can be used in the detection of these fronts. In this case, accuracy is less of a concern because the primary focus is on the spatial derivative of SST. We calculated the gradients for both versions of the MUR data set and did statistical comparisons focusing on the same regions.

sea surface temperature SST)↗

Production of levulinic acid and biocarbon electrode material from corn stover through an integrated biorefinery process

To overcome the inefficient biomass conversion, waste generation, and lack of co-production in biorefineries, an integrated process was proposed for the conversion of corn stover into levulinic acid and biocarbon electrode material. Corn stover was pretreated through hydrothermal process using 0.45 wt% K 2 CO 3 which removed 76 wt% lignin and 85 wt% xylan while preserving 83 wt% glucan. This was followed by acid hydrolysis to produce levulinic acid at varying H 2 SO 4 concentrations and reaction time in a batch reactor at 190 °C. At a reaction time of 5 min in 2 wt% H 2 SO 4 , 35.8 wt% and 30 wt% glucan in raw and pretreated corn stover was converted to levulinic acid, respectively. The residue from acid hydrolysis was converted into biocarbon for supercapacitor electrodes via a two-step thermal activation process which showed a specific capacitance of 120 F g -1 . The proposed integrated biorefinery concept provides multiple value-added products for a greater financial and environmental sustainability.

09 BIOMASS FUELS↗

Oxidation of soil organic carbon during an anoxic-oxic transition

Redox reactions of iron (Fe) can play an important role in controlling the stability and transformation of organic carbon (OC) in soils. However, there is limited knowledge about the dynamics of Fe and OC in soils during anoxic-oxic transitions, which are common in temperate and tropical biomes. In this study, we investigated the fate and transformation of Fe and OC during a 5-day oxic incubation of four pre-reduced (8 days anoxic) forest soils. Up to 3.7% of total OC in the pre-reduced soils was oxidized to CO 2 , in conjunction with the oxidation of 31 –84% of the extractable Fe(II). OC oxidation in pre-reduced soils was lower than non-reducedcontrol soils, indicating that recently anoxically-incubated soils support lower OC metabolism upon re-oxidation than consistently oxic soils. Oxic OC oxidation was negatively correlated with the fraction of Fe-bound OC and also the fraction of short-range-ordered (SRO) Fe oxides. These results suggest that association with Fe oxides—especially SRO Fe oxides—can inhibit the availability of OC for oxidation. However, the difference between the oxidation of OC in pre40 reduced soils and consistently oxic controls could not be linked to the moderate changes in the Fe mineral composition during the anoxic-oxic transition, indicating the importance of longer term OC association with Fe oxides, as well as other processes, in regulating the oxidation of OC during the redox fluctuations. OC association with Fe oxides should be considered during simulations of biogeochemical cycling of OC in soils during the redox fluctuations, for which other processes such as the anoxic transformation of OC and response of the microbial community also need to be incorporated.

58 GEOSCIENCES↗

High entropy alloys as catalysts: A focused review

A brief literature review of recent experimental and computational efforts on the use of high entropy alloys (HEAs) as catalysts is presented, while also sharing some perspectives and future insights. To fully broach the vast compositional possibilities of HEA materials, integrating computational modeling with high-throughput experimental synthesis and validation is necessary to accelerate their design and development. Once identified, specific HEAs can be a class of materials for the next generation of catalysts when addressing global challenges related to energy independence, commodity chemical production, environmental remediation, abating emissions, and modernized domestic supply chain resilience.

42 - ENGINEERING↗

Vertical Hydrologic Exchange Flows Control Methane Emissions from Riverbed Sediments

CH 4 emissions from inland waters are highly uncertain in the current global CH 4 budget, especially for streams, rivers, and other lotic systems. Previous studies have attributed the strong spatiotemporal heterogeneity of riverine CH 4 to environmental factors such as sediment type, water level, temperature, or particulate organic carbon abundance through correlation analysis. However, a mechanistic understanding of the basis for such heterogeneity is lacking. Here, in this study, we combine sediment CH 4 data from the Hanford reach of the Columbia River with a biogeochemical-transport model to show that vertical hydrologic exchange flows (VHEFs), driven by the difference between river stage and groundwater level, determine CH 4 flux at the sediment–water interface. CH 4 fluxes show a nonlinear relationship with the magnitude of VHEFs, where high VHEFs introduce O 2 into riverbed sediments, which inhibit CH 4 production and induce CH 4 oxidation, and low VHEFs cause transient reduction in CH 4 flux (relative to production) due to reduced advective CH 4 transport. In addition, VHEFs lead to the hysteresis of temperature rise and CH 4 emissions because high river discharge caused by snowmelt in spring leads to strong downwelling flow that offsets increasing CH 4 production with temperature rise. Our findings reveal how the interplay between in-stream hydrologic flux besides fluvial-wetland connectivity and microbial metabolic pathways that compete with methanogenic pathways can produce complex patterns in CH 4 production and emission in riverbed alluvial sediments.

54 ENVIRONMENTAL SCIENCES↗

Hydrological Controls on Riverbed Methane Emissions: A Numerical Investigation of Hydrodynamic and Ebullitive Mechanisms from Site to Basin Scales

Methane production and emission from riverbed sediments constitute a significant yet underexplored component of the river methane budget. Despite their importance, a mechanistic and quantitative understanding of these processes under dynamic flow conditions remains elusive, particularly at the basin scale. In this study, we investigate the multiscale (site-to-basin) mechanisms governing methane emissions from riverbeds, focusing on the interplay between biogeochemical processes and hydrological dynamics. We developed a reactive transport model that integrates methane production with hydrodynamic and ebullitive pathways and coupled it with a basin-scale groundwater flow model to simulate methane emissions across scales. By incorporating key factors such as vertical hydrological exchange flow (VHEF), particulate organic carbon availability, sediment properties, and temperature sensitivity, our model captures the spatiotemporal variability of methane ebullition at both the site and basin scales. Our results reveal that methane ebullition is strongly modulated by VHEF, with lower flow rates promoting methane accumulation and subsequent ebullition. Sensitivity analyses underscore nonlinear responses of methane fluxes to environmental drivers. Furthermore, these findings emphasize the critical roles of sediment composition, hydrological exchange, and environmental conditions in shaping methane dynamics. Overall, this work advances our understanding of riverine methane emissions and offers insights for guiding climate models and mitigation strategies.

Fluxes↗

Heterogeneity in Permeability and Particulate Organic Carbon Content Controls the Redox Condition of Riverbed Sediments at Different Timescales

Abstract The hydrological and biogeochemical properties of the hyporheic zone in stream and riverine ecosystems have been extensively studied over the past two decades. Although it is widely acknowledged that sediment heterogeneity can influence biogeochemical reactions, little effort has been made to understand the role of heterogeneity on the spatiotemporal variability of riverbed redox conditions under changing flow dynamics at different timescales. Here we integrate a mechanistic model and field data to demonstrate that heterogeneity in permeability plays a vital role in modulating sediment redox conditions at both seasonal (annual) and event (daily‐to‐weekly) timescales, whereas heterogeneity in particulate organic carbon (POC) content only has a comparable influence on redox conditions at the seasonal timescale. These findings underscore the importance of accurately characterizing sediment heterogeneity, in terms of permeability and POC content, in quantifying biogeochemical dynamics in the riverbed and hyporheic zones of riverine ecosystems.

Geology↗

Influence of Vertical Hydrologic Exchange Flow, Channel Flow, and Biogeochemical Kinetics on CH 4 Emissions From Rivers

Abstract CH 4 emissions from inland water are highly uncertain in the current global CH 4 budget, especially for rivers and streams due to sparse measurements and the uncertainty of measurements caused by turbulent water flow. A previous study has revealed that vertical hydrologic exchange flow (VHEF) is the main regulator of CH 4 emissions from riverbed sediments. However, to what extent the understanding obtained from the plot‐scale can be extended to the reach scale and basin scale remains unknown. To address this challenge, we developed a process‐based model to estimate CH 4 flux at the air‐water interface using the attributes available in the national hydrography data set. It calculates the annual mean flux of VHEF, CH 4 production in sediments, and CH 4 transport in the river channel in a sequential manner. Model performance is evaluated by CH 4 efflux observed at the Hanford reach of the Columbia River. We show that reach‐wise sediment hydrologic and biogeochemical conditions estimated from the national hydrography data set could serve as a good indicator of CH 4 emissions from rivers. Aerobic methane oxidation and export to the downstream are the dominant ways of total CH 4 loss for the large lowland river. The hotspots of CH 4 emissions are likely to be at the reaches with fine sediments and slow channel velocity. This study demonstrates the possibility of quantifying CH 4 emissions at the reach scale and the modeling framework has the potential to be extended to the basin scale to improve estimates of CH 4 emissions from lotic inland water.

58 GEOSCIENCES↗

Cryptic cycling by electroactive bacterioplankton in Trout Bog Lake

The potential for extracellular electron transfer (EET) is a prevailing genomic feature of humic lake bacterioplankton. However, there has been little evidence for the substantial ecological contribution predicted by genetics. We hypothesized that anoxygenic phototrophic electrotrophs and accompanying heterotrophic electrogens cycle dissolved organic matter (DOM) between oxidized and reduced states. We predicted that such bacterioplankton would exhibit diel-scale oscillations due to the light dependency of photosynthesis. Using Trout Bog Lake in Wisconsin, USA, as our model ecosystem, we profiled the water column with depth-discrete metagenomic, physiochemical, and electrochemical analyses. We observed variation in oxidation reduction potential (ORP) in response to sunlight, initiating at depths populated by anoxygenic phototrophs with EET genes. We developed an automated buoy to measure electric current flow between many pairs of electrodes simultaneously, observing correlation in electron consumption to sunlight. Our results, combined with published metatranscriptomic analysis, indicate the occurrence of electron cycling between phototrophic oxidation (electrotrophic metabolism) by Chlorobium and anaerobic respiration (electrogenic metabolism) by Geothrix, involving DOM. We also repeatedly observed gradual seasonal increases in hypolimnion ORP throughout summer. These diel and seasonal patterns imply that electroactive DOM mediates the ecology of electroactive bacteria in lakes, controlling humic lake methane emissions.IMPORTANCEWe investigated the physical, chemical, and redox characteristics of a bog lake and electrodes hung therein to test the hypothesis that dissolved organic matter is being cycled between oxidized and reduced states by electroactive bacterioplankton powered by phototrophy. To do so, we performed field-based analyses on multiple timescales using both established and novel instrumentation. We paired these analyses with recently developed bioinformatics pipelines for metagenomics data to investigate genes that enable electroactive metabolism and accompanying metabolisms. Our results are consistent with our hypothesis and yet upend some of our other expectations. Our findings have implications for understanding greenhouse gas emissions from lakes, including electroactivity as an integral part of lake metabolism throughout more of the anoxic parts of lakes and for a longer portion of the summer than expected. Our results also give a sense of what electroactivity occurs at given depths and provide a strong basis for future studies.

carbon emissions↗

Transport and Retention of Particulate Organic Matter in Sand: Lab Experiments and Modelling

Flow-through reactor (FTR) experiments were conducted at three different downward vertical flow rates to study the transport and retention of particulate organic matter (Chlorella powder) in riverbed sediments. This data package includes data files (.csv) regarding effluent collected from the FTRs during the experiments (time, duration, volume of each sample collection; concentration of nonreactive bromide tracer; concentration of suspended Chlorella determined by absorbance measurements) and sediment (sand) slices collected from the FTRs after the experiments (mass of Chlorella retained in 1 cm depth intervals determined by loss-on-ignition method). More detailed descriptions of data are provided in the data dictionary, and detailed methods are available in the associated MSc thesis listed in ‘Related References.’ The data dictionary and file level meta data (FLMD) are included in the data package as both .csv and .xlsx files. This data package also includes timelapse videos (.mp4) of the experiments, and modelling scripts associated with the experiments. The modelling scripts are included as MATLAB ‘live scripts’ (.mlx, which can be run using MATLAB), and are also included as .pdf and .html files with output plots included (which can be viewed without a MATLAB license and installation). The data files and modelling scripts are organized into a .zip folder for each of the three FTR experiments (three flow rates).

54 ENVIRONMENTAL SCIENCES↗

Precipitation of low-temperature disordered dolomite induced by extracellular polymeric substances of methanogenic Archaea Methanosarcina barkeri : Implications for sedimentary dolomite formation

Abstract A correlation between methanogenesis and dolomite formation has been reported; however, the mechanism underlying this association is not fully understood. In this study, we conducted forced carbonate precipitation experiments at room temperature in calcite-seeded Ca/Mg carbonate solutions containing either purified non-living biomass or bound extracellular polymeric substances (EPS) of the methanogen Methanosarcina barkeri. Purified non-living biomass and bound EPS was used so as to avoid the possible influence of the complex components of the growing microbial culture on carbonate crystallization. Our results demonstrated that non-living biomass of M. Barkeri can enhance the Mg incorporation into calcitic structure and induce the crystallization of disordered dolomite. In the presence of ~113 mg L–1 of non-living biomass, disordered dolomite with ~41 and 45 mol% of MgCO3 was precipitated in solutions with initial Mg:Ca ratios of 5:1 and 8:1, respectively. A systematic increase in the MgCO3 contents of the precipitated Ca-Mg carbonates was also observed with the increased non-living biomass concentration. Bound EPS was shown to be the component of non-living biomass that catalyzed the precipitation of disordered dolomite. At only ~25 mg L–1 of bound EPS, disordered dolomite with ~47 and 48 mol% of MgCO3 was precipitated in solutions with initial Mg:Ca ratios of 5:1 and 8:1, respectively. We propose that adsorption of bound EPS to growing carbonate surfaces through hydrogen bonding is the key to catalyzing disordered dolomite crystallization, and that this mechanism is also applicable to natural EPS-induced dolomite formation. This study provides significant insight into the formation mechanism of microbial-induced dolomite with high δ13C values.

Geochemistry & Geophysics↗

Testing of the Defense Waste Processing Facility Cold Chemical Dissolution Method in Sludge Batch 10 Qualification

For each sludge batch that is processed in the Defense Waste Processing Facility (DWPF), the Savannah River National Laboratory (SRNL) tests the applicability of the digestion methods used by the DWPF Laboratory for elemental analysis of Sludge Receipt and Adjustment Tank (SRAT) Receipt samples and SRAT Product process control samples. DWPF SRAT samples are typically dissolved using a method referred to as the DWPF Cold Chemical or Cold Chem Method (CC), (see DWPF Procedure SW4-15.201- 2.1).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Impacts of Fast Critical Assembly Fuel Discards on Liquid Waste Processes

The Savannah River Nuclear Solutions (SRNS) Fast Critical Assembly (FCA) mission is reestablishing the electrolytic dissolver for processing of Pu and Pu-U materials clad in stainless steel (SS). H-Canyon is planning to dissolve and neutralize FCA fuel without recovering the special nuclear material (i.e., Pu) prior to discarding to the Concentration, Storage, and Transfer Facilities (CSTF) operated by the Savannah River Mission Completion (SRMC) Liquid Waste (LW) Organization. The FCA discards will be combined with sludge in the CSTF after Low Temperature Aluminum Dissolution (LTAD) if needed. The combined waste will be washed, concentrated, and vitrified at the Defense Waste Processing Facility (DWPF). The high level waste canisters produced will be temporarily stored in the Glass Waste Storage Buildings prior to transfer to a future federal repository. Decants from LTAD and sludge washing will be combined with DWPF recycle and dissolved salt cake to prepare salt batches for processing in the Salt Waste Processing Facility. The resulting decontaminated salt solution will be processed in the Saltstone Production Facility.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Electrochemical Denitration and Caustic Generation (EDCGe) System: Year One Project Report

An advanced electrochemical denitration and caustic generation (EDCGe) system is being developed to process legacy waste through the direct feed high-level waste (DFHLW) flowsheet at Hanford. This system aims to destroy nitrates and organics in DFHLW and potentially DFHLAW feeds, significantly reducing off-gas concerns from both process safety and process flowsheet perspectives. Supported by a multidisciplinary team, this effort includes creating a tandem denitration electrolyzer/off-gas system as part of a broader mission to accelerate waste treatment through fundamental and applied research and development initiatives. The progress for the first year of the three-year program to develop technology for the EDCGe system is described within this document.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Findings from Large Bench-Scale Testing of Denitration Electrolyzers for the EDCGe Project

This report highlights the key findings and outcomes relevant to the processability of waste supernatant at Hanford using a denitration electrolyzer. The Electrosynthesis Company issued a Phase 1 report to the Savannah River National Laboratory (SRNL), summarizing the evaluation of large bench-scale denitration electrolyzers to support the electrochemical denitration and caustic generation (EDCGe) project. The Electrosynthesis Company’s report (attached as Appendix A) provides insights into the initial steps required to implement an electrolyzer system at Hanford. Phase 1 experiments focused on validating the denitration electrolyzer’s performance, operating parameters, and reaction products. The robustness of the electrochemical denitration process was demonstrated by two electrolyzer flow cell systems (a 100 cm 2 ElectroCell MP and a 150 cm 2 NESI NS01 cell), both of which achieved significant nitrate and nitrite removal (>50%) with a current efficiency of ~95% for both systems. Higher current densities (500 mA cm –2 ) improved nitrate and nitrite removal rates compared to lower current densities (333 mA cm –2 ), while maintaining a current efficiency of ~94%. The NS01 cell achieved a nitrate species removal rate of ~0.41 mol h –1 at 5 kA m –2 (equiv. to 500 mA cm –2 ). The primary reaction product was ammonia (NH 3 ), constituting 78.3–91.6% of the products (excluding OH – formation). NH 3 was predominantly retained in the catholyte liquid phase rather than being off-gassed. Additionally, the NS01 cell reported an NH 3 generation rate of ~0.36 mol h –1 at 5 kA m –2 . Other gas formation included ~7% N 2 , ~7% H 2 , and trace amounts of N 2 O. The estimated power requirement (extrapolated from the 0.015 m 2 cell data) for a full-scale denitration electrolyzer is approximated to be ~1.6 MW (DC-only) to treat 50% of nitrate and nitrite in a waste stream and generates ~2.1 kmol h –1 of NH 3 with an initial concentration of 4 M NO 3 – /NO 2 – at 300 gal h –1 . Simulated waste containing aluminate, carbonate, oxalate, and halogens exhibited no adverse effects on denitration performance. A preliminary experiment comparing alkaline anolyte (5 M NaOH) with a nickel based anode to acidic media (2 M H 2 SO 4 ) with a DSA-O 2 anode showed a lower operating voltage and generated less H 2 than the acid media. Maintaining a stable 5 M OH – concentration in the anolyte through periodic additions of caustic did not significantly impact denitration performance. This operational mode will be required for long-term experiments. All the experiments demonstrated that electrochemical denitration is a promising approach for treating nitrate and nitrite in simulated waste streams, achieving significant conversion and robustness across varying experimental conditions and electrochemical cell configurations. Lastly, the ability to generate a nearly pure NH 3 stream may prove advantageous for processing at other locations within the Hanford site.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗