SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The use of artificial periodic structures, consisting of spatial modulations of the linear and nonlinear susceptibilities of a nonlinear optical medium, to achieve phase matching in second-harmonic generation is analyzed. Dispersion relations and approximate formulas for the second-harmonic fields generated under various conditions are obtained and used to evaluate the experimental situation.
Optical second-harmonic generation in zinc sulfide-cadmium sulfide and cadmium sulfide- cadmium selenide alloys
Optical second-harmonic generation in zinc sulfide-cadmium sulfide and cadmium sulfide- cadmium selenide alloys measured as function of composition
Optical second harmonic generation in semiconductor alloys
Simultaneous mode locking of Nd YAG laser and intracavity second harmonic generation in high temperature Li niobate or BaNa niobate
Q switched laser pulses lengthened using internal second harmonic generator
A dispersive quartz prism is used to couple the total second harmonic generated in both directions by an internal cavity frequency doubler. The study shows that the dispersion of air and mirror reflection phase shifts can be compensated for by a slight nonphase match condition in the doubler.
56-percent efficient external-cavity-resonant second-harmonic generation of a diode-laser pumped, CW single-axial-mode Nd:YAG laser is reported. A theory of external doubling with a resonant fundamental is presented and compared to experimental results for three monolithic cavities of nonlinear MgO:LiNbO3. The best conversion efficiency was obtained with a 12.5-mm-long monolithic ring cavity doubler, which produced 29.7 mW of CW, single-axial model 532-nm radiation from an input of 52.5 mW.
Various applications of an antiresonant ring, consisting of a beam splitter and a number of optical reflectors, are described. With a beam splitter having a transmission coefficient and a reflection coefficient, an optical beam incident on the beam splitter along a first axis is split into two components which circulate around the ring in opposite directions. They are recombined to reflect back the beam along the first axis, with none of the beam power being directed along a second axis. The ring can be part of the cavity of two otherwise independent lasers, with two separate laser mediums external to the ring, or with a multi-wavelength laser medium in the ring. The ring together with a second-harmonic generation crystal and a dispersive phase shifter in the ring can generate the second harmonic of an optical beam.
The theory and recent applications of waves in periodic structures are reviewed. Both the Floquet and coupled waves approach are analyzed in some detail. The theoretical part of the paper includes wave propagation in unbounded and bounded active or passive periodic media, wave scattering from periodic boundaries, source radiation (dipole, Cerenkov, transition, and Smith-Purcell) in periodic media, and pulse transmission through a periodic slab. The applications part covers the recent development in a variety of fields: distributed feedback oscillators, filters, mode converters, couplers, second-harmonic generators, deflectors, modulators, and transducers in the fields of integrated optics and integrated surface acoustics. Work on insect compound eyes, mechanical structures, ocean waves, pulse compressions, temperature waves, and cholesteric liquid crystals, and particles interaction with crystals is briefly reviewed, especially in the case of zeolite crystals and superlattices. Recent advances in fabrication techniques for very fine gratings are also covered.
The development of an ultrasonic method for the nondestructive characterization of mechanical properties of engineering material is described. The method utilizes the nonlinearity parameter measurement which describes the anharmonic behavior of the solid through measurements of amplitudes of the fundamental and of the generated second harmonic ultrasonic waves. The nonlinearity parameter is also directly related to the acoustoelastic constant of the solid which can be determined by measuring the linear dependence of ultrasonic velocity on stress. A major advantage of measurements of the nonlinearity parameter over that of the acoustoelastic constant is that it may be determined without the application of stress on the material, which makes it more applicable for in-service nondestructive characterization. The relationships between the nonlinearity parameter of second-harmonic generation and the percentage of solid solution phase in engineering materials such as heat treatable aluminum alloys was established. The acoustoelastic constants are measured on these alloys for comparison and confirmation. A linear relationship between the nonlinearity parameter and the volume fraction of second phase precipitates in the alloys is indicated.
The squeezing spectra for the output fields of several intracavity nonlinear optical systems are obtained. It is shown that at critical points, e.g., the turning points for optical bistability, the threshold for parametric oscillation, and the self-pulsing instability in second-harmonic generation, perfect squeezing in the output field is, in principle, possible.
Diode-laser-pumped Nd:YLF lasers are demonstrated at 1.047 microns with less than 1-mW thresholds and internal quantum efficiencies approaching 70 percent. Operation at 1.053 microns has also been achieved. Intracavity second-harmonic generation using MgO:LiNbO3 has generated up to 145-micro-W output at 523.6 nm for 30.1 mW of diode-laser pump power.
The rapid improvement in diode laser pump sources has led to the recent progress in diode laser pumped solid state lasers. To date, electrical efficiencies of greater than 10 percent were demonstrated. As diode laser costs decrease with increased production volume, diode laser and diode laser array pumped solid state lasers will replace the traditional flashlamp pumped Nd:YAG laser sources. The use of laser diode array pumping of slab geometry lasers will allow efficient, high peak and average power solid state laser sources to be developed. Perhaps the greatest impact of diode laser pumped solid state lasers will be in spectroscopic applications of miniature, monolithic devices. Single-stripe diode-pumped operation of a continuous-wave 946 nm Nd:YAG laser with less than 10 m/w threshold was demonstrated. A slope efficiency of 16 percent near threshold was shown with a projected slope efficiency well above a threshold of 34 percent based on results under Rhodamine 6G dye-laser pumping. Nonlinear crystals for second-harmonic generation of this source were evaluated. The KNbO3 and periodically poled LiNbO3 appear to be the most promising.
Single-stripe diode-laser-pumped operation of a continuous-wave 946-nm Nd:YAG laser with less than 10-mW threshold has been demonstrated. A slope efficiency of 16 percent near threshold was shown with a projected slope efficiency well above a threshold of 34 percent based on results under Rhodamine 6G dye-laser pumping. Nonlinear crystals for second-harmonic generation of this source were evaluated. KNbO3 and periodically poled LiNbO3 appear to be the most promising.
The control unit and RF head of the SHE model 330XRFSQUID system are shown to be sensitive to ambient ac magnetic fields below 1 HZ, which cause the appearance of false signals corresponding to a magnetometer signal of 0.000001 phi(0) per gauss of field applied. The control unit shows a sensitivity that is linear with frequency, suggesting that the signal is generated by Faraday induction. In contrast, the RF head response is independent of frequency and shows a strong second-harmonic coversion. This response may be due to the magnetic field sensitivity of the ferrite core inductor in the tuned amplifier of the RF head. These signals induced by ambient fields are a potential source of error in Stanford's Relativity Gyroscope experiment, which uses SQUID's on board a rolling satellite as part of the gyroscope readout system. The extent of the magnetic field sensitivity in these components necessitates the use of additional magnetic shielding aboard the satellite.
Diode-laser-pumped solid-state laser oscillators and nonlinear processes were investigated. A new generation on nonplanar oscillator was fabricated, and it is anticipated that passive linewidths will be pushed to the kilohertz regime. A number of diode-pumped laser transitions were demonstrated in the rod configuration. Second-harmonic conversion efficiencies as high as 15% are routinely obtained in a servo-locked external resonant doubling crystal at 15 mW cw input power levels at 1064 nm.
A model is developed for the radio-frequency (RF) heating of soft X-ray emitting plasma in solar flares due to absorption of amplified cyclotron radiation. The radiation, carrying approximately 10 to the 27th to approximately 10 to the 30th erg/s, is generated through maser emission following partial precipitation of electrons in one or more flaring loops. The maser operates in a large number of small regions, each producing an 'elementary burst' (EB) of short duration. This radiation propagates either directly or after reflection to the second-harmonic absorption layer, where it is absorbed by thermal electrons. The properties of EBs and the heating of the electrons in the absorption layer are discussed in detail. RF heating and evaporation models for the production of soft X-ray emitting plasma are compared. Properties of the RF heating model that explain observed features are energy transport across field lines, rapid heating (in approximately 1 s) of coronal plasma to approximately 3 x 10 to the 7th K, and instigation of turbulent velocities up to the ion sound speed.