Search NASA⌕ Search

SEARCH · Search NASA

Results for “sediment sorting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Using XRD to Characterize Sediment Sorting in a Mars Analog Glacio-Fluvio-Eolian Basaltic Sedimentary System in Iceland

The martian surface has a primarily basaltic composition and is dominated by sedimentary deposits. Ancient layered sedimentary rocks have been identified across the planet from orbit, have been studied in situ by the Mars Exploration Rovers and the Mars Science Laboratory rover, and will be studied by the Mars 2020 rover. These ancient sedimentary rocks were deposited in fluvial, lacustrine, and eolian environments during a warmer and wetter era on Mars. It is important to study the composition of sediments in Mars analog environments to characterize how minerals in basaltic sedimentary systems are sorted and/or aqueously altered. This information can help us better interpret sedimentary processes from similar deposits on Mars and derive information about the igneous source rocks. Sediment sorting has been studied extensively on Earth, but not typically in basaltic environments. Previous work has addressed sorting of basaltic sediments through experimental techniques and in modern eolian basaltic systems and aqueous alteration in subglacial and proglacial environments. We add to this body of research by studying sediment sorting and aqueous alteration in a glacio-fluvio-eolian basaltic system in southwest Iceland.

Rampe, E. B.↗
NASA NTRS2020

Sediment Sorting and Rounding in a Basaltic Glacio-Fluvio-Aeolian Environment: Ϸhórisjökull Glacier, Iceland

Sediments and sedimentary rocks preserve a rich history of environment and climate. Identifying these signals requires an understanding of the physical and chemical processes that have affected sedimentary deposits [1]. Such processes include sorting and rounding during transport and chemical alteration through weathering and diagenesis. Although these processes have long been studied in quartz-dominated sedimentary systems [2], a lack of studies of basaltic sedimentary systems limits our interpretations of the environment and climate where mafic source rocks dominate, such as on Mars [3,4]. As part of the SAND-E: Semi-Autonomous Navigation for Detrital Environments project [5], which uses robotic operations to examine physical and chemical changes to sediments in basaltic glacio-fluvialaeolian environments, this research studies changes in sorting and rounding of fluvial-aeolian sediments along a glacier-proximal-to-glacier-distal transect in the outwash-plain of the Ϸόrisjökull glacier in SW Iceland (Fig. 1)

Mason, K. G.↗
NASA NTRS2018

Using Mineralogy of the Bagnold Dune Field in Gale Crater to Interpret Eolian Sediment Sorting on the Martian Surface

The Mars Science Laboratory Curiosity rover landed in Gale crater in August 2012 to characterize modern and ancient surface environments. Curiosity executed a two-phase campaign to study the morphology, activity, physical properties, and chemical and mineralogical composition of the Bagnold Dune Field, an active eolian dune field on the lower slopes of Aeolis Mons (Mount Sharp). Detectable aspects of dune sand mineralogy have been examined from orbit with the visible/short-wave infrared spectrometer CRISMand the thermal-infrared spectrometers THEMIS and TES. CRISM data demonstrate variations in plagioclase, pyroxene, and olivine abundances across the dune field. Curiosity analyzed sediments from two locations in the dune field to evaluate the causes of the mineralogical differences observed from orbit. The Gobabeb sample was collected from Namib Dune, a barchanoidal dune on the upwind margin of the dune field, and the Ogunquit Beach sample was collected from the Mount Desert Island sand patch located downwind from Namib. These samples were sieved to <150 μm and delivered to the CheMin X-ray diffraction instrument for quantitative mineralogical analysis. CRISM-derived mineralogy of the Namib Dune and Mount Desert Island and CheMin-derived mineralogy of the Gobabeb and Ogunquit Beach samples can be used in a value-added manner to interpret grain segregation at the bedform to dune-field scale and evaluate contributions from local sediment sources. Models of CRISM data demonstrate that Mount Desert Island is more enriched in olivine and less enriched in plagioclase than Namib dune, suggesting that fine-grained mafic sediments are preferentially mobilized downwind. Curiosity data indicate olivine also forms a coarse lag on the lee sides of barchanoidal dunes. Minor abundances of hematite, quartz, and anhydrite and small differences in the crystal chemistry of plagioclase and pyroxene derived from CheMin data suggest that sediments from the underlying lacustrine rocks also contribute to the Bagnold sands.

Rampe, E. B.↗
DOE OSTI2025

Impact of mixed grain size sediment input on braided river Morphodynamics: Insights from experimental and numerical modeling

The rate of sediment supply has significant impacts on river morphology, making it crucial to understand the geomorphic changes and grain size distribution dynamics in rivers. However, the effects of varying grain size sediment input on morphological changes in braided channels remain poorly understood. This study is the first to investigate the bar development and sediment sorting processes in braided channels with non-uniform sediment inputs using both numerical and experimental approaches. We applied a two-dimensional numerical model, Nays2DH to confirm and generalize experimental results. The model reproduced key experiment results, including 1) stream elevation changes, and 2) grain size distribution. Using this validated model, we explored the morphological changes and sorting process in a braided river with sediment inputs. The numerical experiments demonstrate that sediment input controls the elevation of the stream bed and the grain size distribution. Notably, both the elevation and grain-size distribution become relatively stable in downstream of the channel. Additionally, the simulation results suggest that an increased sediment supply leads to greater channel complexity, with bed surface armoring decreasing.

Nays2DH↗
NASA NTRS1973

Evaluation of submarine strain-gage systems for monitoring coastal sediment migration

Single and multiple strain-gage systems were respectively evaluated as in situ point and areal sensors for monitoring sand-height variations in coastal environments. Static loading tests indicate that gage response pressure is linear for sand heights up to 24 inches. Response pressures are a function of both sand height and aggregate density, with density being influenced by both sediment texture and degree of compaction. Poorer sediment sorting and greater compaction result in higher response pressures. Field tests in a beach foreshore environment indicate that the gage systems are effective qualitative instruments for monitoring long-period migration trends of beach sediments; whereas, short-period responses are not sufficiently reliable. The durability and compactness of the gage systems must be substantially increased for effective field operations. It is recommended that the systems' qualitative potentials be further developed, whereas their development as quantitative instruments be terminated. Further development should emphasize the construction of remote recording systems designed for semipermanent installation.

Shideler, G. L.↗
DOE OSTI2025

High-resolution lidar observations of sedimentation-induced size sorting of droplets near a laboratory cloud top

Cloud optical properties and precipitation, which are crucial to weather and climate, are strongly influenced by cloud microphysical properties that are still poorly understood. Here, we develop a high-resolution time-correlated single-photon-counting lidar and apply it to observe cloud microphysical properties at one-centimeter range resolution in a convection chamber under well-controlled conditions. Together with concurrent in-situ measurements and theoretical analysis, our lidar observations indicate that although turbulent mixing tends to homogenize the cloud in the bulk region, entrainment and sedimentation cause inhomogeneities in droplet concentrations near the cloud top. Specifically, the topmost region is directly affected by entrainment, and lidar profiles show clear evidence of entrained air and detrained cloud filament. The transition region below exhibits vertical size sorting of cloud droplets caused by sedimentation. Our results suggest that using a single sedimentation velocity for all cloud droplets, as is done in many atmospheric models, overlooks key physics relevant to the microphysical structure near the cloud top. In conclusion, our conceptual model used to describe these measurements can serve as a step toward improving the current modeling of processes in the cloud top region.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Using pollen in turbidites for vegetation reconstructions

Turbidites, deposited by sub-aqueous gravity flows, are common in sedimentary archives worldwide and present a unique challenge and opportunity when reconstructing past vegetation through pollen analysis. When sampling pollen from a sediment core for palaeovegetation records, it is common practice to target background sediments (i.e. pelagic sediment) and avoid sampling turbidites, as they are presumed to portray a misleading picture of past vegetation. This assumption stems from our limited understanding of pollen abundance and distribution through turbidites, meaning that palynologists overlook deposits that could potentially be used to reconstruct past vegetation and climate. We present pollen assemblage and sedimentological data from four recent (<150 years) deep marine turbidite deposits from the Hikurangi Subduction Margin, Aotearoa-New Zealand, with the aim of understanding the abundance and distribution of pollen in fine-grained turbidites. We find that pollen is diluted in the bases of turbidites, but despite this dilution, the proportions of different pollen taxa remain consistent through each turbidite. These results confirm that pollen can be sampled from turbidites for palaeovegetation reconstructions and that sampling the fine-grained upper parts of turbidites will provide the best pollen recovery.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1992

An experimental study of aeolian structures on Venus

Experiments to simulate the formation of aeolian bed forms on Venus show that a high-density atmosphere produces small transverse bed forms with dimensionless similarities to terrestrial dunes but with both dimensional and behavioral similarities to subaqueous current ripples. Their development is influenced by wind speed, particle size, and atmospheric density. Although aeolian bed forms should be observed at all elevations on Venus, their optimum expression is compatible with the lowest elevations where atmospheric pressure is greatest. Their development is relatively unhindered by the presence of dense grains, the lack of sorting in source sediment from which they form, or the addition of cohesive dust. Small (about 10 cm) bed forms are efficient in sorting materials either by density or particle size. Bed forms developed in the limited size of the wind tunnel are probably representative of small bed forms on Venus; considerations suggest that bed forms on Venus may grow to larger sizes. Discovery of dune fields on Magellan images of Venus support this prediction.

Marshall, John R.↗
NASA NTRS2020

Overview and Initial Results of SAND-E: Semi-Autonomous Navigation for Detrital Environments

Unmanned aerial systems (UAS) and automated terrain analysis for science and navigation are new technologies for planetary exploration. The Mars Helicopter will fly with the Mars2020 rover, the Dragonfly quadcopter will explore Titan, and Soil Properties and Object Classification (SPOC) software will be used for path planning and navigation on the Mars2020 rover. Using an Argo J5 rover instrumented with stereo cameras and Autonomous Soil Assessment System (ASAS) software, and an off the shelf quadcopter, SAND-E tested the use of automated terrain analysis and UAS data for science operations in a Mars-analog environment in Iceland during July of 2019. Scientifically, we sought to determine changes in the physical and chemical properties of sediments along a glacial-fluvial-aeolian transport pathway. Operationally, we tested rover mission-like scenarios that included UAS images and classified terrain images. Here, we present the initial results for both the operations and science elements of the study. Site Selection: A goal of SAND-E is examine sorting and alteration of sediments in fluvial and aeolian environments in both mineral-dominated and glass-dominated basaltic settings. During the first year of the project we focused on a mineral-dominated environment. Selection of the location was based on prior publications that indicated our selected region had a greater abundance of crystalline sediments than other areas fluvial-aeolian settings in Iceland. Other criteria included the presence of both fluvial and aeolian landforms along a transport pathway such that the sediments in transport could be linked to their source rocks. We chose the Skjaldbreidauhraun glacial outwash plain, which sits at the base of Thórisjökull glacier. The site is 30 km north of Thingvellir National Park and ~2 hours from Reykjavik. The outwash plain is fed by two small catchments that drain from the base of the glacier and cut through hyaloclastite and shield volcano bedrock. The drainage progresses from steep alluvial fans near the glacier into a low-sloping fluvial braidplain that becomes confined by the Skjaldbreidur shield volcano and creates a shallow canyon cut into lava bedrock. The fluvial system was a typical braided alluvial environment composed pebble- and cobble-bedded longitudinal bars and sandy channel beds. The river remained active and fluctuated in response to diurnal runoff cycles near the glacier before disappearing into the sandy substrate downstream. The high concentration of suspended sediment in the river was evident by the cloudy water and the silt and clay-sized sediments that draped the channel beds after abandonment and created playas in the lowest sloping areas of the catchment. The entire fluvial system was affected by the winds generated by frontal systems and katabatic flows descending the glacier. This resulted in the formation of aeolian lag deposits and a wind-deflation plain where the fluvial system was not active. Wind ripples and drifts formed in abandoned fluvial channels from aeolian reworking of the sand-sized fluvial sediments. The silt- and clay-sized sediments found in fluvial channels, bar tops, and playas generated dust plumes during high wind events. Our operation sought to capture the variability in this system by sampling from the range of fluvial and aeolian features 6.3 km (proximal), 11.3 km (medial), and 14.4 km (distal) along the river from its origin at the base of glacier.

Ewing, R. C.↗
NASA NTRS1986

The initiation of grain movement by wind

When air blows across the surface of dry, loose sand, a critical shear velocity must be achieved to inititate motion. Since most natural sediments consist of a range of grain sizes, fluid threshold for any sediment cannot really be defined by a finite value but should be viewed as a threshold range which is a function of the mean size, sorting, and packing of the sediment. In order to investigate the initiation of particle movement by wind, a series of wind tunnel tests were carried out on a range of screened sands and commercially available glass beads of differing sizes, sorting, and shape characteristics. In addition, individual samples of the glass beads were mixed to produce rather poorly sorted bimodal distributions. Test results suggest that when velocity is slowly increased over the sediment surface the smaller or more exposed grains are first entrained by the fluid drag of the air either in surface creep or in saltation. As velocity continues to rise, the larger more protected grains may also be moved by fluid drag. The data also indicate that predicted values based on the modified Bagnold equation fall within the range of threshold values defined by the transition section of the grain movement/shear velocity plots. Moreover, the predicted values are very similar to the threshold values derived for the point maximum inflection on the curves.

Nickling, W. G.↗
NASA NTRS1987

The initiation of grain movement by wind

When air blows across the surface of dry, loose sand, a critical shear velocity must be achieved to initiate motion. Since most natural sediments consist of a range of grain sizes, fluid threshold for any sediment cannot really be defined by a finite value but should be viewed as a threshold range which is a function of the mean size, sorting, and packing of the sediment. In order to investigate the initiation of particle movement by wind, a series of wind tunnel tests were carried out on a range of screened sands and commercially available glass beads of differing size, sorting, and shape characteristics. In addition, individual samples of the glass beads were mixed to produce rather poorly sorted bimodal distributions. Test results suggest the when velocity is slowly increased over the sediment surface the smaller or more exposed grains are first engrained by the fluid drag of the air either in surface creep or in saltation. As velocity continues to rise, the larger more protected grains may also be moved by fluid drag. The data also indicate that predicted values based on the modified Bagnold equation fall within the range of threshold values defined by the transition section of the grain movement/shear velocity plots. Moreover, the predicted values are very similar to the threshold values derived for the point maximum inflection on the curves.

Nickling, William G.↗
NASA NTRS1980

Chemical and isotopic fractionation by grain size separates

Fractionation of refractory elements according to grain size is argued to occur during their growth. Two major modes should exist: (1) during thermal condensation sequences whenever the condensing phase (e.g. Mg2SiO4) does not alloy with the precondensed phase (e.g. MgAl2O4); (2) during accretion of gaseous atoms in the nonequilibrated interstellar medium. Processes dynamically sorting grains according to size (e.g. sedimentation) therefore are potentially capable of achieving fractionations normally attributed to separations of dust and gas. This paper considers the first mode during supernova condensation; however, it also can occur in an equilibrium solar condensation sequence owing to an overlooked freedom in that simplified description.

Clayton, D. D.↗
NASA NTRS1988

Growth of continental crust: Clues from Nd isotopes and Nb-Th relationships in mantle-derived magmas

Isotope and trace element geochemistry of Precambrian mantle derived rocks and implications for the formation of the continental crust is discussed. Epsilon Nd values of Archean komatiites are variable, but range up to at least +5, suggesting that the Archean mantle was heterogeneous and, in part, very depleted as far back as 3.4 to 3.5 Ga. This may be taken as evidence for separation of continental crust very early in Earth history. If these komatiite sources were allowed to evolve in a closed system, they would produce modern day reservoirs with much higher epsilon Nd values than is observed. This implies recycling of some sort of enriched material, perhaps subducted sediments, although other possibilities exist. Archean volcanics show lower Nb/Th than modern volcanics, suggesting a more primitive mantle source than that observed nowadays. However, Cretaceous komatiites from Gorgona island have similar Nb/Th to Archean volcanics, indicating either the Archean mantle source was indeed more primitive, or Archean magmas were derived from a deep ocean island source like that proposed for Gorgona.

Arndt, N. T.↗
NASA NTRS1994

Modeling fluvial erosion on regional to continental scales

The fluvial system is a major concern in modeling landform evolution in response to tectonic deformation. Three stream bed types (bedrock, coarse-bed alluvial, and fine-bed alluvial) differ in factors controlling their occurrence and evolution and in appropriate modeling approaches. Spatial and temporal transitions among bed types occur in response to changes in sediment characteristics and tectonic deformation. Erosion in bedrock channels depends upon the ability to scour or pluck bed material; this detachment capacity is often a power function of drainage area and gradient. Exposure of bedrock in channel beds, due to rapid downcutting or resistant rock, slows the response of headwater catchments to downstream baselevel changes. Sediment routing through alluvial channels must account for supply from slope erosion, transport rates, abrasion, and sorting. In regional landform modeling, implicit rate laws must be developed for sediment production from erosion of sub-grid-scale slopes and small channels.

Howard, Alan D.↗
NASA NTRS2019

Using Chemcam Derived Geochemistry to Identify the Paleonet Sediment Transport Direction and Source Region Characteristics of the Stimson Formation in Gale Crater, Mars

The NASA Curiosity rover has encountered both ancient and modern dune deposits within Gale crater. The modern dunes are actively migrating across the surface within the Bagnold Dune field of which Curiosity conducted analysis campaigns at two different localities. Variations in mafic-felsic mineral abundances between these two sites have been related to the aeolian mineral sorting regime for basaltic environments identified on the Earth which become preferentially enriched in olivine relative to plagioclase feldspar with increasing distance from the source. This aeolian mineral sorting regime for basaltic minerals has also been inferred for Mars from orbital data. The aim of this study is to investigate whether this aeolian mafic-felsic mineral sorting trend has left a geochemical signature in the ancient dune deposits preserved within the Stimson formation. The Stimson formation unconformably overlies the Murray formation and consists of thickly laminated, cross-bedded sandstone. Stimson outcrops have a variable thickness up to 5 meters covering a total area of 17 square kilometers. A dry, aeolian origin was determined for this sandstone due to the high sphericity and roundness of the grains, uniform bimodal grain size distribution (250-710 microns), and 1-meter-thick cross-beds. Identifying the geochemical signature of mineral sorting can provide insights about the paleo-net sediment transport direction of the dunes and prevailing wind direction at the time of deposition.

Bedford, C. C.↗
NASA NTRS2010

Mauna Kea, Hawaii as an Analogue Site for Future Planetary Resource Exploration: Results from the 2010 ILSO-ISRU Field-Testing Campaign

Within the framework of the International Lunar Surface Operation - In-Situ Resource Utilization Analogue Test held on January 27 - February 11, 2010 on the Mauna Kea volcano in Hawaii, a number of scientific instrument teams collaborated to characterize the field site and test instrument capabilities outside laboratory environments. In this paper, we provide a geological setting for this new field-test site, a description of the instruments that were tested during the 2010 ILSO-ISRU field campaign, and a short discussion for each instrument about the validity and use of the results obtained during the test. These results will form a catalogue that may serve as reference for future test campaigns. In this paper we provide a description and regional geological setting for a new field analogue test site for lunar resource exploration, and discuss results obtained from the 2010 ILSO-ISRU field campaign as a reference for future field-testing at this site. The following instruments were tested: a multispectral microscopic imager, MMI, a Mossbauer spectrometer, an evolved gas analyzer, VAPoR, and an oxygen and volatile extractor called RESOLVE. Preliminary results show that the sediments change from dry, organic-poor, poorly-sorted volcaniclastic sand on the surface, containing basalt, iron oxides and clays, to more water- and organic-rich, fine grained, well-sorted volcaniclastic sand, primarily consisting of iron oxides and depleted of basalt and clays. Furthermore, drilling experiments showed a very close correlation between drilling on the Moon and drilling at the test site. The ILSO-ISRU test site was an ideal location for testing strategies for in situ resource exploration at the lunar or martian surface.

ten Kate, I. L.↗
DOE OSTI2025

Laminarin stimulates single cell rates of sulfate reduction whereas oxygen inhibits transcriptomic activity in coastal marine sediment

Abstract The chemical cycles carried out by bacteria and archaea living in coastal sediments are vital aspects of benthic ecology. These ecosystems are subject to physical disruption, which may allow for increased respiration and complex carbon consumption—impacting chemical cycling in this environment often thought to be a terminal place of deposition. We use the redox-enzyme sensitive probe RedoxSensor Green to measure rates of electron transfer physiology in individual sulfate reducer cells residing in anoxic sediment, subjected to transient exposure of oxygen and laminarin. We use index fluorescence activated cell sorting and single cell genomics sequencing to link those measurements to genomes of respiring cells. We measure per-cell sulfate reduction rates in marine sediments (0.01–4.7 fmol SO42− cell−1 h−1) and determine that cells within the Chloroflexota phylum are the most active in respiration. Chloroflexota respiration activity is also stimulated with the addition of laminarin, even in marine sediments already rich in organic matter. Evaluating metatranscriptomic data alongside this respiration-based technique, Chloroflexota genomes encode laminarinases indicating a likely ability to degrade laminarin. We also provide evidence that abundant Patescibacteria cells do not use electron transport pathways for energy, and instead likely carry out fermentation of polysaccharides. There is a decoupling of respiration-related activity rates from transcription, as respiration rates increase while transcription decreases with oxygen exposure. Overall, we reveal an active community of respiring Chloroflexota that cycles sulfate at potential rates of 23–40 nmol h−1 per cm3 sediment in incubation settings, and non-respiratory Patescibacteria that can cycle complex polysaccharides.

Lindsay, Melody R.↗
NASA NTRS1984

Separation of cells from the rat anterior pituitary gland

Data concerned with analyzing the cellular organization of the rat anterior pituitary gland are examined. The preparation of the cell suspensions and the methods used to separate pituitary cell types are described. Particular emphasis is given to velocity sedimentation at unit gravity, density gradient centrifugation, affinity methods, fluorescence activated cell sorting, and density gradient and continuous-flow electrophoresis. The difficulties encountered when attempting to compare data from different pituitary cell separation studies are discussed, and results from various experiments are presented. The functional capabilities of the separated cell populations can be tested in various culture systems.

Hymer, W. C.↗