Results for “semi-supervised learning”

NASA NTRS2017

Semi-Supervised Learning of Lift Optimization of Multi-Element Three-Segment Variable Camber Airfoil

This chapter describes a new intelligent platform for learning optimal designs of morphing wings based on Variable Camber Continuous Trailing Edge Flaps (VCCTEF) in conjunction with a leading edge flap called the Variable Camber Krueger (VCK). The new platform consists of a Computational Fluid Dynamics (CFD) methodology coupled with a semi-supervised learning methodology. The CFD component of the intelligent platform comprises of a full Navier-Stokes solution capability (NASA OVERFLOW solver with Spalart-Allmaras turbulence model) that computes flow over a tri-element inboard NASA Generic Transport Model (GTM) wing section. Various VCCTEF/VCK settings and configurations were considered to explore optimal design for high-lift flight during take-off and landing. To determine globally optimal design of such a system, an extremely large set of CFD simulations is needed. This is not feasible to achieve in practice. To alleviate this problem, a recourse was taken to a semi-supervised learning (SSL) methodology, which is based on manifold regularization techniques. A reasonable space of CFD solutions was populated and then the SSL methodology was used to fit this manifold in its entirety, including the gaps in the manifold where there were no CFD solutions available. The SSL methodology in conjunction with an elastodynamic solver (FiDDLE) was demonstrated in an earlier study involving structural health monitoring. These CFD-SSL methodologies define the new intelligent platform that forms the basis for our search for optimal design of wings. Although the present platform can be used in various other design and operational problems in engineering, this chapter focuses on the high-lift study of the VCK-VCCTEF system. Top few candidate design configurations were identified by solving the CFD problem in a small subset of the design space. The SSL component was trained on the design space, and was then used in a predictive mode to populate a selected set of test points outside of the given design space. The new design test space thus populated was evaluated by using the CFD component by determining the error between the SSL predictions and the true (CFD) solutions, which was found to be small. This demonstrates the proposed CFD-SSL methodologies for isolating the best design of the VCK-VCCTEF system, and it holds promise for quantitatively identifying best designs of flight systems, in general.

Intelligent Systems↗

NASA NTRS2015

An Active Learning Framework for Hyperspectral Image Classification Using Hierarchical Segmentation

Augmenting spectral data with spatial information for image classification has recently gained significant attention, as classification accuracy can often be improved by extracting spatial information from neighboring pixels. In this paper, we propose a new framework in which active learning (AL) and hierarchical segmentation (HSeg) are combined for spectral-spatial classification of hyperspectral images. The spatial information is extracted from a best segmentation obtained by pruning the HSeg tree using a new supervised strategy. The best segmentation is updated at each iteration of the AL process, thus taking advantage of informative labeled samples provided by the user. The proposed strategy incorporates spatial information in two ways: 1) concatenating the extracted spatial features and the original spectral features into a stacked vector and 2) extending the training set using a self-learning-based semi-supervised learning (SSL) approach. Finally, the two strategies are combined within an AL framework. The proposed framework is validated with two benchmark hyperspectral datasets. Higher classification accuracies are obtained by the proposed framework with respect to five other state-of-the-art spectral-spatial classification approaches. Moreover, the effectiveness of the proposed pruning strategy is also demonstrated relative to the approaches based on a fixed segmentation.

classification↗

NASA NTRSDate not supplied

Multi-Class Anomaly Detection in Flight Data using Semi-Supervised Explainable Deep Learning Model

Identifying precursor for safety incidents in aviation data is a crucial task, yet extremely challenging. The main approach, in practice, leverages domain expertise to define expected tolerances in system’s behavior and alarm exceedance from such safety margins. However, this approach is incapable of identifying unknown risk and vulnerabilities. Machine learning has been long studied and deployed to identify precursors for such anomalies, with the great challenge of the need for sufficient labelled set of data to achieve a reliable and accurate performance. In this article, we develop an explainable deep semi-supervised model for anomaly detection in aviation, building upon recent advancements in the machine learning literature. The proposed model combines feature engineering and classification in the feature space, while leveraging all available data (labelled and unlabeled). Validating on two case studies of anomaly detection in take-off and landing phases of commercial aircraft, we show that our model is able to outperform state-of-the-art supervised anomaly detection model and reach significantly high accuracy and low false alarm with minimum amount of available labelled data.

Anomaly Detection↗

NASA NTRS2022

Mars Terrain Segmentation with Less Labels

Planetary rover systems need to perform terrain segmentation to identify drivable areas as well as identify specific types of soil for sample collection. The latest Martian terrain segmentation methods rely on supervised learning which is very data hungry and difficult to train where only a small number of labeled samples are available. Moreover, the semantic classes are defined differently for different applications (e.g., rover traversal vs. geological) and as a result the network has to be trained from scratch each time, which is an inefficient use of resources. This research proposes a semi-supervised learning framework for Mars terrain segmentation where a deep segmentation network trained in an unsupervised manner on unlabeled images is transferred to the task of terrain segmentation trained on few labeled images. The network incorporates a backbone module which is trained using a contrastive loss function and an output atrous convolution module which is trained using a pixel-wise cross-entropy loss function. Evaluation results using the metric of segmentation accuracy show that the proposed method with contrastive pre-training outperforms plain supervised learning by 2%-10%. Moreover, the proposed model is able to achieve a segmentation accuracy of 91.1% using only 161 training images (1% of the original dataset) compared to 81.9% with plain supervised learning.

Wilson, Brian D↗

NASA NTRSDate not supplied

Using Machine Learning to Infer Material Properties of Debris Fragments from X-ray Images in the DebriSat Project

The DebriSat project is a collaboration effort with the NASA Orbital Debris Program Office, the U.S. Space Force Space Systems Command Center, The Aerospace Corporation, and the University of Florida. To date, over 200,000 fragments from this ground-based, hypervelocity impact experiment have been collected, and processing is underway to determine their physical characteristics, such as material, shape, color, characteristic length, and average cross-sectional area. The x-ray process is primarily used to identify the location of the fragments and estimated size for extraction, so that these physical characteristics can be assessed. This paper proposes a machine learning-based approach to characterize materials from x-ray images of debris fragments embedded in soft-catch foam used in the DebriSat project. The novel methodology discussed in this paper will highlight the use of x-ray imagery data to characterize these fragments without extraction or a human-in-the-loop. Both supervised and unsupervised machine learning techniques are utilized with this approach to infer the physical parameters of the fragments embedded in the soft-catch foam panels used in the impact experiment based on x-ray images of the foam panels. Additionally, 3D reconstructions of the extracted fragments are created with images taken from two different angles using the structure from motion (SfM) method. The characteristic lengths and shape from the 3D reconstruction, alongside the physical characteristics of the debris, are used in the inference of the material type. To develop and test the approach, a dataset of x-ray images of debris fragments of varying sizes and materials is collected. Supervised learning methods such as convolutional neural networks (CNNs), support vector machines (SVM), decision trees, and random forest classifiers are used due to the high-dimensional feature spaces of the debris and nonlinear decision boundaries for material categorization. Given the limited pre-labeled data of embedded debris materials smaller than 10 mm, unsupervised machine learning techniques such as clustering algorithms and autoencoders are used, in addition to supervised learning methods. The clustering algorithms group similar fragments together based on their physical properties, and autoencoders reduce the dimensionality of the x ray images and extract relevant features. The performance of the proposed approach's is analyzed using a range of statistical methods, including confusion matrices, receiver operating characteristic curves, and precision-recall curves. The results are compared with those obtained using a baseline approach that relies on manual identification and classification of debris fragments. To evaluate the effectiveness of different machine learning methods, statistical tests such as t-tests, ANOVA, and cross-validation are performed, comparing the performance of CNNs, SVMs, clustering algorithms, and autoencoders. Additional analysis needs to be conducted to identify any sources of bias or variability that may affect the results, such as variations in imaging conditions or fragmentation patterns. Other topics explored are limitations, refinements, and the potential use of semi-supervised learning techniques, such as self-training to label unlabeled datasets and co-training using x-ray images taken from two different angles as two different models.

Saik Anam Siam↗

NASA NTRS2023

Using Machine Learning to Infer Material Properties of Debris Fragments from X-ray Images in the DebriSat Project

The DebriSat project is a collaboration effort with the NASA Orbital Debris Program Office, the U.S. Space Force Space Systems Command Center, The Aerospace Corporation, and the University of Florida. To date, over 200,000 fragments from this ground-based, hypervelocity impact experiment have been collected, and processing is underway to determine their physical characteristics, such as material, shape, color, characteristic length, and average cross-sectional area. The x-ray process is primarily used to identify the location of the fragments and estimated size for extraction, so that these physical characteristics can be assessed. This paper proposes a machine learning-based approach to characterize materials from x-ray images of debris fragments embedded in soft-catch foam used in the DebriSat project. The novel methodology discussed in this paper will highlight the use of x-ray imagery data to characterize these fragments without extraction or a human-in-the-loop. Both supervised and unsupervised machine learning techniques are utilized with this approach to infer the physical parameters of the fragments embedded in the soft-catch foam panels used in the impact experiment based on x-ray images of the foam panels. Additionally, 3D reconstructions of the extracted fragments are created with images taken from two different angles using the structure from motion (SfM) method. The characteristic lengths and shape from the 3D reconstruction, alongside the physical characteristics of the debris, are used in the inference of the material type. To develop and test the approach, a dataset of x-ray images of debris fragments of varying sizes and materials is collected. Supervised learning methods such as convolutional neural networks (CNNs), support vector machines (SVM), decision trees, and random forest classifiers are used due to the high-dimensional feature spaces of the debris and nonlinear decision boundaries for material categorization. Given the limited pre-labeled data of embedded debris materials smaller than 10 mm, unsupervised machine learning techniques such as clustering algorithms and autoencoders are used, in addition to supervised learning methods. The clustering algorithms group similar fragments together based on their physical properties, and autoencoders reduce the dimensionality of the x ray images and extract relevant features. The performance of the proposed approach's is analyzed using a range of statistical methods, including confusion matrices, receiver operating characteristic curves, and precision-recall curves. The results are compared with those obtained using a baseline approach that relies on manual identification and classification of debris fragments. To evaluate the effectiveness of different machine learning methods, statistical tests such as t-tests, ANOVA, and cross-validation are performed, comparing the performance of CNNs, SVMs, clustering algorithms, and autoencoders. Additional analysis needs to be conducted to identify any sources of bias or variability that may affect the results, such as variations in imaging conditions or fragmentation patterns. Other topics explored are limitations, refinements, and the potential use of semi-supervised learning techniques, such as self-training to label unlabeled datasets and co-training using x-ray images taken from two different angles as two different models.

Saik Anam Siam↗

NASA NTRS2019

Developing a Machine-Learning-Based Processing Framework for Twitter and Other Crowdsourced Data

Crowdsourced data streams such as Twitter and other social media are important sources of real-time and historical global information for Earth science applications. At the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), we have been exploring the Twitter data stream for its potential in augmenting the validation program of NASA's Global Precipitation Measurement (GPM) mission. To realize this potential, we need to increase the information density and enhance the quality of filtered precipitation tweets. We have implemented various components of a machine learning (ML)-based processing infrastructure for crowdsourced data that outputs, in this instance, useful and usable information derived from precipitation tweets. We have test enriched the Twitter stream with higher quality active tweets from those knowingly contributing to our effort and from existing crowdsourced programs (e.g., mPING, CoCoRaHS). We have experimented with various algorithms for processing tweets, including NaÃ ve Bayes, Convolutional Neural Network (CNN), Hierarchical Attention Network (HAN), and semi-supervised learning (with tri-training). Our current work focuses on (1) automated review of Earth science-related publications to determine relationships between discipline research needs and ML algorithms; (2) investigating Sequential Generative Adversarial Network (SeqGAN) for processing precipitation tweets for anomaly detection; and (3) managing crowdsourced data in a way that is compatible with existing NASA satellite data archives and using the data for ML applications. Key results include (1) network visualization of NLP-processed publications in various Earth science disciplines; (2) difference between GPM-linked, generated tweets and collected actual tweets that is small for GPM-determined light to moderate rain cases and high for GPM-determined heavy rain cases; and (3) identification of MongoDB for storing raw tweets and Zarr format for gridded tweets (compatible with GPM data). Our results have taken us a step closer to an operational ML-based tweet processing infrastructure and have already demonstrated that tweet-derived precipitation information is potentially useful for validation of Earth science satellite data.

Teng, William↗

NASA NTRS2017

NeMO-Net: The Neural Multi-Modal Observation and Training Network for Global Coral Reef Assessment

In the past decade, coral reefs worldwide have experienced unprecedented stresses due to climate change, ocean acidification, and anthropomorphic pressures, instigating massive bleaching and die-off of these fragile and diverse ecosystems. Furthermore, remote sensing of these shallow marine habitats is hindered by ocean wave distortion, refraction and optical attenuation, leading invariably to data products that are often of low resolution and signal-to-noise (SNR) ratio. However, recent advances in UAV and Fluid Lensing technology have allowed us to capture multispectral 3D imagery of these systems at sub-cm scales from above the water surface, giving us an unprecedented view of their growth and decay. Exploiting the fine-scaled features of these datasets, machine learning methods such as MAP, PCA, and SVM can not only accurately classify the living cover and morphology of these reef systems (below 8 percent error), but are also able to map the spectral space between airborne and satellite imagery, augmenting and improving the classification accuracy of previously low-resolution datasets. We are currently implementing NeMO-Net, the first open-source deep convolutional neural network (CNN) and interactive active learning and training software to accurately assess the present and past dynamics of coral reef ecosystems through determination of percent living cover and morphology. NeMO-Net will be built upon the QGIS platform to ingest UAV, airborne and satellite datasets from various sources and sensor capabilities, and through data-fusion determine the coral reef ecosystem makeup globally at unprecedented spatial and temporal scales. To achieve this, we will exploit virtual data augmentation, the use of semi-supervised learning, and active learning through a tablet platform allowing for users to manually train uncertain or difficult to classify datasets. The project will make use of Pythons extensive libraries for machine learning, as well as extending integration to GPU and High-End Computing Capability (HECC) on the Pleiades supercomputing cluster, located at NASA Ames. The project is being supported by NASAs Earth Science Technology Office (ESTO) Advanced Information Systems Technology (AIST-16) Program.

NeMO-Net↗

NASA NTRS2017

NeMO-Net The Neural Multi-Modal Observation Training Network for Global Coral Reef Assessment

In the past decade, coral reefs worldwide have experienced unprecedented stresses due to climate change, ocean acidification, and anthropomorphic pressures, instigating massive bleaching and die-off of these fragile and diverse ecosystems. Furthermore, remote sensing of these shallow marine habitats is hindered by ocean wave distortion, refraction and optical attenuation, leading invariably to data products that are often of low resolution and signal-to-noise (SNR) ratio. However, recent advances in UAV and Fluid Lensing technology have allowed us to capture multispectral 3D imagery of these systems at sub-cm scales from above the water surface, giving us an unprecedented view of their growth and decay. Exploiting the fine-scaled features of these datasets, machine learning methods such as MAP, PCA, and SVM can not only accurately classify the living cover and morphology of these reef systems (below 8 error), but are also able to map the spectral space between airborne and satellite imagery, augmenting and improving the classification accuracy of previously low-resolution datasets.We are currently implementing NeMO-Net, the first open-source deep convolutional neural network (CNN) and interactive active learning and training software to accurately assess the present and past dynamics of coral reef ecosystems through determination of percent living cover and morphology. NeMO-Net will be built upon the QGIS platform to ingest UAV, airborne and satellite datasets from various sources and sensor capabilities, and through data-fusion determine the coral reef ecosystem makeup globally at unprecedented spatial and temporal scales. To achieve this, we will exploit virtual data augmentation, the use of semi-supervised learning, and active learning through a tablet platform allowing for users to manually train uncertain or difficult to classify datasets. The project will make use of Pythons extensive libraries for machine learning, as well as extending integration to GPU and High-End Computing Capability (HECC) on the Pleiades supercomputing cluster, located at NASA Ames. The project is being supported by NASAs Earth Science Technology Office (ESTO) Advanced Information Systems Technology (AIST-16) Program.

Remote Sensin↗

NASA NTRS2020

Unsupervised Anomaly Detection in High-Dimensional Flight Data Using Convolutional Variational Auto-Encoder

The modern National Airspace System (NAS) is an extremely safe system and the aviation industry has experienced a steady decrease in fatalities over the years. This can be attributed to both improved flight critical systems with redundant hardware and software protections, as well as an increased focus on active monitoring and response to real time and historically identified vulnerabilities by implementing more resilient procedures and protocols. The main approach for identifying vulnerabilities in operations leverages domain expertise using knowledge about how the system should behave within the expected tolerances to known safety margins. This approach works well when the system has a well-defined operating condition. However, the operations in the NAS can be highly complex with various nuances that render it difficult to clearly pre-define all known safety vulnerabilities. With the advancement of data science and machine learning techniques, the potential to automatically identify emerging vulnerabilities in the observed operations has become more practical in recent years. The state-of-the-art anomaly detection approaches in aerospace data usually rely on supervised or semi-supervised learning. However, in many real-world problems such as flight safety, creating labels for the data requires huge amount of effort and is largely impractical. To address this challenge, we developed a Convolutional Variational Auto-Encoder (CVAE), which is an unsupervised learning approach for anomaly detection in high-dimensional heterogeneous time-series data. We validate performance of CVAE compared to the state-of-the-art supervised learning approach as well as unsupervised clustering-based approach using KMeans++ and kernel-based approach using One-Class Support Vector Machine (OC-SVM) on Yahoo!'s benchmark time series anomaly detection data. Finally, we showcase performance of CVAE on a case study of identifying anomalies in the first 60 seconds of commercial flights' take-offs using Flight Operational Quality Assurance (FOQA) data.

Memarzadeh, Milad↗

NASA NTRSDate not supplied

Unsupervised Anomaly Detection in High-Dimensional Flight Data Using Convolutional Variational Auto-Encoder

The modern National Airspace System (NAS) is an extremely safe system. The industry has experienced a steady decrease in fatalities over the years. This can be contributed to both improved flight critical systems with redundant hardware and software protections as well as an increased focus on active monitoring and response to real time and historically identified vulnerabilities by implementing more resilient procedures and protocols. The main practice for identifying vulnerabilities in operations leverages domain expertise using knowledge about how the system should behave with the expected tolerances to known safety margins. This approach works well when the system has a well-defined operating condition. However, the operations in the NAS can be highly complex with various nuances that render it difficult to clearly pre-define all known safety vulnerabilities. With the advancement of data science and machine learning techniques, the potential to automatically identify emerging vulnerabilities in the observed operations has become more practical in recent years. The state-of-the-art anomaly detection approaches in aerospace data usually rely on supervised or semi-supervised learning. However, in many real-world problems such as flight safety creating labels for the data requires huge amount of efforts and is largely expensive. As a result, in this article, we develop a Convolutional Variational Auto-Encoder (CVAE), an unsupervised learning approach for anomaly detection in high-dimensional heterogeneous time-series data. We validate performance of CVAE compared to the state-of-the-art supervised learning approach (as an upper bound) as well as an supervised clustering based on K-Means (as a lower bound) on Yahoo!'s benchmark time series anomaly detection data. Finally, we showcase performance of CVAE on a case study of identifying anomalies in the first 60 seconds of commercial flights' take-offs using Flight Operational Quality Assurance (FOQA) data.

Milad Memarzadeh↗

NASA NTRSDate not supplied

Data Augmentation for Intelligent Contingency Management Using Generative Adversarial Neural Networks

Artificial intelligence (AI)-based techniques for intelligent contingency management (ICM) require that intelligent agents learn various aspects of system dynamics to create and execute contingencies. For high assurance contingency management, agents achieve the most compelling results through supervised or semi-supervised machine learning, for which agents require large datasets to learn the dynamics of the system. Unfortunately, data collection in aerospace applications can be costly, due to both time and resources. Presented work describes a framework for data augmentation of ICM databases containing training data for machine learning models. This framework populates the database with the outputs of generative adversarial network (GAN) models that were trained on flight data. Methods for evaluating the suitability of these models based on the equations of motion, as well as other physical constraints, are discussed. The paper demonstrates the utility of this database for training intelligent agents on the NASA T2 generic transport aircraft model and experimental vertical takeoff and landing (VTOL) simulation model.

Generative Machine Learning↗

NASA NTRSDate not supplied

Data Augmentation for Intelligent Contingency Management Using Generative Adversarial Neural Networks

Artificial intelligence (AI)-based techniques for intelligent contingency management (ICM) require that intelligent agents learn various aspects of system dynamics to create and execute contingencies. For high assurance contingency management, agents achieve the most compelling results through supervised or semi-supervised machine learning, for which agents require large datasets to learn the dynamics of the system. Unfortunately, data collection in aerospace applications can be costly, due to both time and resources. Presented work describes a framework for data augmentation of ICM databases containing training data for machine learning models. This framework populates the database with the outputs of generative adversarial network (GAN) models that were trained on flight data. Methods for evaluating the suitability of these models based on the equations of motion, as well as other physical constraints, are discussed. The paper demonstrates the utility of this database for training intelligent agents on the NASA T2 generic transport aircraft model and experimental vertical takeoff and landing (VTOL) simulation model.

Generative Machine Learning↗

NASA NTRS2018

Advances in Hyperspectral Image Classification Methods for Vegetation and Agricultural Cropland Studies

Hyperspectral data are becoming more widely available via sensors on airborne and unmanned aerial vehicle (UAV) platforms, as well as proximal platforms. While space-based hyperspectral data continue to be limited in availability, multiple spaceborne Earth-observing missions on traditional platforms are scheduled for launch, and companies are experimenting with small satellites for constellations to observe the Earth, as well as for planetary missions. Land cover mapping via classification is one of the most important applications of hyperspectral remote sensing and will increase in significance as time series of imagery are more readily available. However, while the narrow bands of hyperspectral data provide new opportunities for chemistry-based modeling and mapping, challenges remain. Hyperspectral data are high dimensional, and many bands are highly correlated or irrelevant for a given classification problem. For supervised classification methods, the quantity of training data is typically limited relative to the dimension of the input space. The resulting Hughes phenomenon, often referred to as the curse of dimensionality, increases potential for unstable parameter estimates, overfitting, and poor generalization of classifiers. This is particularly problematic for parametric approaches such as Gaussian maximum likelihood–based classifiers that have been the backbone of pixel-based multispectral classification methods. This issue has motivated investigation of alternatives, including regularization of the class covariance matrices, ensembles of weak classifiers, development of feature selection and extraction methods, adoption of nonparametric classifiers, and exploration of methods to exploit unlabeled samples via semi-supervised and active learning. Data sets are also quite large, motivating computationally efficient algorithms and implementations. This chapter provides an overview of the recent advances in classification methods for mapping vegetation using hyperspectral data. Three data sets that are used in the hyperspectral classification literature (e.g., Botswana Hyperion satellite data and AVIRIS airborne data over both Kennedy Space Center and Indian Pines) are described in Section 3.2 and used to illustrate methods described in the chapter. An additional high-resolution hyperspectral data set acquired by a SpecTIR sensor on an airborne platform over the Indian Pines area is included to exemplify the use of new deep learning approaches, and a multiplatform example of airborne hyperspectral data is provided to demonstrate transfer learning in hyperspectral image classification. Classical approaches for supervised and unsupervised feature selection and extraction are reviewed in Section 3.3. In particular, nonlinearities exhibited in hyperspectral imagery have motivated development of nonlinear feature extraction methods in manifold learning, which are outlined in Section 3.3.1.4. Spatial context is also important in classification of both natural vegetation with complex textural patterns and large agricultural fields with significant local variability within fields. Approaches to exploit spatial features at both the pixel level (e.g., co-occurrence–based texture and extended morphological attribute profiles [EMAPs]) and integration of segmentation approaches (e.g., HSeg) are discussed in this context in Section 3.3.2. Recently, classification methods that leverage nonparametric methods originating in the machine learning community have grown in popularity. An overview of both widely used and newly emerging approaches, including support vector machines (SVMs), Gaussian mixture models, and deep learning based on convolutional neural networks is provided in Section 3.4. Strategies to exploit unlabeled samples, including active learning and metric learning, which combine feature extraction and augmentation of the pool of training samples in an active learning framework, are outlined in Section 3.5. Integration of image segmentation with classification to accommodate spatial coherence typically observed in vegetation is also explored, including as an integrated active learning system. Exploitation of multisensor strategies for augmenting the pool of training samples is investigated via a transfer learning framework in Section 3.5.1.2. Finally, we look to the future, considering opportunities soon to be provided by new paradigms, as hyperspectral sensing is becoming common at multiple scales from ground-based and airborne autonomous vehicles to manned aircraft and space-based platforms.

Pasolli, Edoardo↗

NASA NTRSDate not supplied

Towards Physics Guided Optical Flow for Tracking Atmospheric Motion

Observations of atmospheric 3D winds are critical for improving short-range and long-range forecasting. Such advancement in forecasting directly applies to research in a number of areas including convective processes, wildfire plumes and tornado prediction. Atmospheric Motion Vectors (AMVs) provide a passively sensed approach to quantifying horizontal motion and cloud heights, which are typically sourced from geostationary sensors due to the availability of high frequency observations. Recent work has shown that estimating AMVs by tracking individual pixels with dense optical flow is a promising new direction. In this work, we compare state-of-the-art convolutional neural networks for optical flow in a physics-guided deep learning framework for predicting AMVs. The approach is semi-supervised and uses physically informed wind vectors from high-resolution numerical simulations for supervised learning followed by fine-tuning though warping and reconstruction of full-disk geostationary images (GOES-16). In the vertical direction, we use labels from the CALIPSO low-earth orbit satellite to predict cloud height from 16-band geostationary images with a neural network. We present results for both tasks on held-out time periods and secondary datasets.

Geostationary↗

NASA NTRSDate not supplied

Towards Physics Guided Optical Flow for Tracking Atmospheric Motion

Atmospheric 3D winds in the horizontal and vertical directions are critical for improving short-range and long-range forecasting. Such advancement in forecasting directly applies to research in a number of areas including convective processes, wildfire plumes and tornado prediction. Atmospheric Motion Vectors (AMVs) provide a passively sensed approach to quantifying horizontal motion and cloud heights, which are typically sourced from geostationary sensors due to the availability of high frequency observations. Recent work has shown that estimating AMVs by tracking individual pixels with dense optical flow is a promising new direction. In this work, we use a state-of-the-art convolutional neural network for optical flow (FlowNetS) in a physics-guided deep learning framework for predicting AMVs in the horizontal direction. The approach is semi-supervised and uses physically informed wind vectors from high-resolution numerical simulations (DYAMOND) for supervised learning followed by fine-tuning though warping and reconstruction of full-disk geostationary images (GOES-16). In the vertical direction, we use labels from the CALIPSO low-earth orbit satellite to predict cloud height from 16-band geostationary images with a neural network. We present results for both tasks on held-out time periods and secondary datasets.

geostationary↗

NASA NTRS2006

Value, Cost, and Sharing: Open Issues in Constrained Clustering

Clustering is an important tool for data mining, since it can identify major patterns or trends without any supervision (labeled data). Over the past five years, semi-supervised (constrained) clustering methods have become very popular. These methods began with incorporating pairwise constraints and have developed into more general methods that can learn appropriate distance metrics. However, several important open questions have arisen about which constraints are most useful, how they can be actively acquired, and when and how they should be propagated to neighboring points. This position paper describes these open questions and suggests future directions for constrained clustering research.

constraints↗

NASA NTRS2013

NASA Tech Briefs, June 2013

Topics include: Cloud Absorption Radiometer Autonomous Navigation System - CANS, Software Method for Computed Tomography Cylinder Data Unwrapping, Re-slicing, and Analysis, Discrete Data Qualification System and Method Comprising Noise Series Fault Detection, Simple Laser Communications Terminal for Downlink from Earth Orbit at Rates Exceeding 10 Gb/s, Application Program Interface for the Orion Aerodynamics Database, Hyperspectral Imager-Tracker, Web Application Software for Ground Operations Planning Database (GOPDb) Management, Software Defined Radio with Parallelized Software Architecture, Compact Radar Transceiver with Included Calibration, Software Defined Radio with Parallelized Software Architecture, Phase Change Material Thermal Power Generator, The Thermal Hogan - A Means of Surviving the Lunar Night, Micromachined Active Magnetic Regenerator for Low-Temperature Magnetic Coolers, Nano-Ceramic Coated Plastics, Preparation of a Bimetal Using Mechanical Alloying for Environmental or Industrial Use, Phase Change Material for Temperature Control of Imager or Sounder on GOES Type Satellites in GEO, Dual-Compartment Inflatable Suitlock, Modular Connector Keying Concept, Genesis Ultrapure Water Megasonic Wafer Spin Cleaner, Piezoelectrically Initiated Pyrotechnic Igniter, Folding Elastic Thermal Surface - FETS, Multi-Pass Quadrupole Mass Analyzer, Lunar Sulfur Capture System, Environmental Qualification of a Single-Crystal Silicon Mirror for Spaceflight Use, Planar Superconducting Millimeter-Wave/Terahertz Channelizing Filter, Qualification of UHF Antenna for Extreme Martian Thermal Environments, Ensemble Eclipse: A Process for Prefab Development Environment for the Ensemble Project, ISS Live!, Space Operations Learning Center (SOLC) iPhone/iPad Application, Software to Compare NPP HDF5 Data Files, Planetary Data Systems (PDS) Imaging Node Atlas II, Automatic Calibration of an Airborne Imaging System to an Inertial Navigation Unit, Translating MAPGEN to ASPEN for MER, Support Routines for In Situ Image Processing, and Semi-Supervised Eigenbasis Novelty Detection.

Source record↗