Search NASA⌕ Search

SEARCH · Search NASA

Results for “semiconductor-metal transition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Atomic Structure, Dynamics, Changes in Chemical Bonding and Semiconductor-Metal Transition in Sb 2 Se 3 : A Remarkable Material for Quantum Networks and Energy Applications

Antimony sesquiselenide has become an outstanding functional material for photovoltaics, energy storage and transformation, memory and photonic applications. Sb 2 Se 3 is one of the most successful emerging solar light absorbers and has also been identified as a highly promising ultralow-loss phase-change material (PCM) for next-generation coherent nanophotonic processors, photonic tensor cores, quantum and neuromorphic networks. Unlike benchmark telluride PCMs, Sb 2 Se 3 features a quasi-one-dimensional (1D) crystalline structure consisting of (Sb 4 Se 6 ) ∞ ribbons, lacks the typical PCM chemical bonding, and undergoes an extended semiconductor-metal transition above the melting point. Consequently, the origin of high optical contrast between crystalline (SET) and amorphous (RESET) logic states remains elusive and presents a significant challenge. Using high-energy X-ray diffraction and Raman spectroscopy over a wide temperature range, supported by first-principles simulations and complemented by thermal, optical and electrical measurements, as well as by 121 Sb-Mossbauer spectroscopy, the quasi-1D network of orthorhombic antimony sesquiselenide was found to undergo significant evolution in amorphous and supercooled Sb 2 Se 3 , leading to lower coordination, shorter interatomic distances and a higher p-electron density on antimony, indicating changes in chemical bonding. The observed novel Sb 2 Se 3 nanocrystalline polymorph, characterized by trigonal antimony coordination and more isolated Sb-Se ribbons, could help reduce multiple trapping defect states in the bandgap, which are typical of orthorhombic Sb 2 Se 3 , thereby enhancing the power-conversion efficiency of photovoltaic devices. Semimetallic and metallic liquid Sb 2 Se 3 exhibit a gradual transformation into a denser 2D and/or 3D network with higher antimony coordination. Localized electron states in the pseudogap are becoming extended, leading to an increase in electronic conductivity σ following the relationship σ ∝ N(E F ) 2 . Liquid Sb 2 Se 3 also appears to be strongly fragile, with a nonmonotonic change in viscosity and higher atomic mobility in the metallic liquid. Furthermore, these results explain extraordinary functionalities of Sb 2 Se 3 for photonic and energy applications.

antimony↗
DOE OSTI2026

Pressure‐Induced Structural and Magnetic Evolution in Layered Antiferromagnet YbMn 2 Sb 2

Electronic states under pressure exhibit unconventional spin and charge dynamics that provide a powerful route to uncover exotic phases in quantum materials. Here, we present the structural, magnetic, and electronic evolution of YbMn 2 Sb 2 under pressure. Single-crystal X-ray diffraction reveals a pressure-induced structural transition from the space group trigonal P$\overline{3}$m1 to the monoclinic P2 1 /m phase near 3.5 GPa, which remains stable up to 10 GPa. Magnetization measurements display an anomalously weak net magnetic moment and the absence of Curie–Weiss behavior up to 400 K, suggesting the formation of short-range Mn moment pairs that cancel macroscopically and subsequently evolve into long-range order upon cooling. Temperature-dependent resistivity shows semiconducting behavior with a transition at ∼119 K at ambient pressure, while pressure induces a dramatic suppression of resistance and the emergence of metallic-like temperature dependence, stabilized beyond 5 GPa. This pressure-driven semiconductor-metal transition is consistent with our density functional theory calculations, confirming the closing of the band gap under compression. Neutron diffraction under pressure identifies an incommensurate magnetic structure with antiparallel correlations between paired spins. Together, these results demonstrate how pressure-driven structural tuning and competing exchange interactions stabilize unconventional magnetic states in this low-dimensional magnetic semiconductor.

antiferromagnetic semiconductor↗
DOE OSTI2021

Bulk Glassy GeTe 2 : A Missing Member of the Tetrahedral GeX 2 Family and a Precursor for the Next Generation of Phase-Change Materials

Vitreous germanium disulfide GeS 2 and diselenide GeSe 2 belong to canonical chalcogenide glasses extensively studied over the past half century. Their high-temperature orthorhombic polymorphs are congruently melting compounds, and the tetrahedral crystal and glass structure is largely preserved in the melt. In contrast, the ditelluride counterpart is absent in the Ge-Te phase diagram, which shows only a single compound, monotelluride GeTe. Phase-change materials based on GeTe have become a technologically important class of solids, and their structure and properties are also widely studied. Surprisingly, very scarce information is available for alloys having GeTe 2 stoichiometry. Using a fast quenching procedure in silica capillaries, high-energy X-ray diffraction, and Raman spectroscopy supported by first-principles simulations, we show that bulk glassy GeTe 2 differs substantially from the lighter GeX 2 members, revealing 46% of trigonal germanium, 31% of three-fold coordinated tellurium, and only 20% of edge-sharing tetrahedra or pyramids. The fraction of homopolar Ge-Ge bonds is low; however, the population of dominant Te-Te dimers and Te n oligomers, n <= 10, appears to be significant. The complex structural and chemical topology of g-GeTe 2 is directly related to the thermodynamic metastability of germanium ditelluride, schematically represented by the following reaction: GeTe 2 $\rightleftarrows$ GeTe + Te. Disproportionation is complete above liquidus in the temperature range of semiconductor-metal transition, and the dense metallic GeTe 2 liquid, mostly consisting of five-fold coordinated Ge species, exhibits high fluidity, strong fragility (m = 99 ± 5), and presumably a fast structural transformation rate combined with low atomic mobility in the vicinity of the glass transition temperature, favorable for reliable long-term data retention in nonvolatile memories. The observed and predicted characteristic features make GeTe 2 a promising precursor for the next generation of phase-change materials, especially coupled with additional metal doping, depolymerizing the tetrahedral interconnected glass network and accelerating (sub)nanosecond crystallization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Metastable Metallic Phase of a Bilayer Blue Phosphorene Induced by Interlayer Bonding and Intralayer Charge Redistributions

We have carried out diffusion Monte Carlo calculations for an A 1 B -1 -stacked bilayer blue phosphorene to find that it undergoes a semiconductor-metal transition as the interlayer distance decreases. While the most stable bilayer structure is a semiconducting one with two monolayers coupled through weak van der Waals interaction, the metallic bilayer at a shorter interlayer distance is found to be only metastable. This is in contrast to a recent theoretical prediction based on random phase approximation that the metallic phase would be the most stable bilayer configuration of blue phosphorene. Our analysis of charge density distributions reveals that the metastable metallic phase is induced by interlayer chemical bonding and intralayer charge redistributions. This study enriches our understanding of interlayer binding of a blue phosphorene and contributes to establishment of correct energetic order between its different phases, which will be essential in devising an experimental pathway for a metallic phosphorene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Transient Mesoscopic Immiscibility, Viscosity Anomaly, and High Internal Pressure at the Semiconductor–Metal Transition in Liquid Ga 2 Te 3

Gallium tellurides appear to be promising phase-change materials (PCMs) of the next generation for brain-inspired computing and reconfigurable optical metasurfaces. They are different from the benchmark PCMs because of sp 3 gallium hybridization in both cubic Ga 2 Te 3 and amorphous pulsed laser deposition (PLD) films. Liquid Ga 2 Te 3 also shows a viscosity η(T) anomaly just above melting when η(T) first increases and only then starts decreasing. We used high-energy X-ray diffraction to observe a transient mesoscopic immiscibility that suggested dense metallic liquid droplets in a semiconducting melt. The η(T) shape was consistent with this finding. A vanishing first sharp diffraction peak that also shifts to a higher Q indicates a high internal pressure in the metallic melt, which produces a remarkable asymmetry of the Ga–Te nearest neighbor distances and is reminiscent of high-pressure rhombohedral Ga 2 Te 3 . Finally, the observed phenomena provide a realistic scenario for a fast, multilevel SET–RESET response, which also unravels similar trends in the purported density-driven liquid polyamorphism of water, phosphorus, sulfur, and other materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2003

Structural Fluctuations and Thermophysical Properties of Molten II-VI Compounds

The objectives of the project are to conduct ground-based experimental and theoretical research on the structural fluctuations and thermophysical properties of molten II-VI compounds to enhance the basic understanding of the existing flight experiments in microgravity materials science programs as well as to study the fundamental heterophase fluctuation phenomena in these melts by: 1) conducting neutron scattering analysis and measuring quantitatively the relevant thermophysical properties of the II-VI melts (such as viscosity, electrical conductivity, thermal diffusivity and density) as well as the relaxation characteristics of these properties to advance the understanding of the structural properties and the relaxation phenomena in these melts and 2) performing theoretical analyses on the melt systems to interpret the experimental results. All the facilities required for the experimental measurements have been procured, installed and tested. It has long been recognized that liquid Te presents a unique case having properties between those of metals and semiconductors. The electrical conductivity for Te melt increases rapidly at melting point, indicating a semiconductor-metal transition. Te melts comprise two features, which are usually considered to be incompatible with each other: covalently bound atoms and metallic-like behavior. Why do Te liquids show metallic behavior? is one of the long-standing issues in liquid metal physics. Since thermophysical properties are very sensitive to the structural variations of a melt, we have conducted extensive thermophysical measurements on Te melt.

Su, Ching-Hua↗
DOE OSTI2024

Atomic Structure and Dynamics of Unusual and Wide-Gap Phase-Change Chalcogenides: A GeTe 2 Case

Brain-inspired computing, reconfigurable optical metamaterials, photonic tensor cores, and many other advanced applications require next-generation phase-change materials (PCMs) with better energy efficiency and a wider thermal and spectral range for reliable operations. Germanium ditelluride (GeTe 2 ), with higher thermal stability and a larger bandgap compared to current benchmark PCMs, appears promising for THz metasurfaces and the controlled crystallization of atomically thin 2D materials. Using high-energy X-Ray diffraction supported by first-principles simulation, the atomic structure in semiconducting pulsed laser deposition films and metallic high-temperature liquids is investigated. The results suggest that the structural and chemical metastability of GeTe 2 , leading to disproportionation into GeTe and Te, is related to high internal pressure during a semiconductor–metal transition, presumably occurring in the supercooled melt. Similar phenomena are expected for canonical GeS 2 and GeSe 2 under high temperatures and pressures.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Defect-induced states, defect-induced phase transition, and excitonic states in bent tungsten disulfide (WS 2 ) nanoribbons: Density functional vs. many body theory

Two-dimensional (2D) transition metal dichalcogenide (TMD) materials have versatile electronic and optical properties. TMD nanoribbons exhibit interesting properties due to reduced dimensionality, quantum confinement, and edge states, which make them suitable for various electronic and optoelectronic applications. In a previous work conducted by our group, we demonstrated that the edge bands evolved with bending can tune the optical properties for various widths of TMD nanoribbons. Defects are commonly present in 2D TMD materials, and can dramatically change the material properties. Here, in this following work, we investigate the interaction between the edge and the defect states in tungsten disulfide (WS 2 ) nanoribbons with lines of W- or S-atom vacancies defects under different bending conditions, using density functional theory (DFT). To gain understanding about the limits of density functional approximations, we compare results on band gaps and energies of defect states with quasiparticle GW. We reveal interesting semiconductor-metal phase transitions, suggesting potential applications in nanoelectronics or molecular electronics. We also calculate the optical absorption of the bent and defective nanoribbons with the many-body GW-BSE (Bethe-Salpeter equation) approach, revealing a tunable optical spectrum and diverse exciton states in the defective WS 2 nanoribbons.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Fragile-to-strong transition in liquid As 2 S 3 under pressure: The effect of melt metallization

The well-known classification of glass-forming melts into fragile and strong liquids has several notable exceptions, including water, silica, and certain phase-change materials (PCMs). These exceptional fluid systems exhibit a fragile-to-strong transition (FST) upon cooling: a transformation from a high-temperature liquid with fast atomic dynamics, low viscosity, and low flow activation energy, to a viscous supercooled melt with high energy barriers near the glass transition temperature T g . This behavior is critically important for non-volatile memories, photonic tensor cores, reconfigurable metamaterials, and other devices, that use PCMs, enabling nanosecond-scale crystallization in the fragile regime and long data retention in the strong regime near or below T g . A significant structural transformation is expected between these two viscosity regimes, along with a semiconductor-metal (SC-M) transition upon heating, driven by high internal pressure and associated density increase. By applying high external pressure to the canonical low-conducting chalcogenide melt As 2 S 3 , we observed both the FST and the SC-M transition, occurring simultaneously within the same domain of the P, T−phase space. These findings suggest that the FST is not limited to a few exceptional liquids but is a common phenomenon, at least in systems that exhibit melt metallization within specific regions of their P, T−phase diagrams.

first-principles molecular dynamics↗
DOE OSTI2025

Photocatalytic Semiconductor–Metal Hybrid Nanoparticles: Single-Atom Catalyst Regime Surpasses Metal Tips

Semiconductor–metal hybrid nanoparticles (HNPs) are promising materials for photocatalytic applications, such as water splitting for green hydrogen generation. While most studies have focused on Cd containing HNPs, the realization of actual applications will require environmentally compatible systems. Using heavy-metal free ZnSe-Au HNPs as a model, we investigate the dependence of their functionality and efficiency on the cocatalyst metal domain characteristics ranging from the single-atom catalyst (SAC) regime to metal-tipped systems. The SAC regime was achieved via the deposition of individual atomic cocatalysts on the semiconductor nanocrystals in solution. Utilizing a combination of electron microscopy, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy, we established the presence of single Au atoms on the ZnSe nanorod surface. Upon increased Au concentration, this transitions to metal tip growth. Photocatalytic hydrogen generation measurements reveal a strong dependence on the cocatalyst loading with a sharp response maximum in the SAC regime. Ultrafast dynamics studies show similar electron decay kinetics for the pristine ZnSe nanorods and the ZnSe-Au HNPs in either SAC or tipped systems. This indicates that electron transfer is not the rate-limiting step for the photocatalytic process. Combined with the structural-chemical characterization, we conclude that the enhanced photocatalytic activity is due to the higher reactivity of the single-atom sites. This holistic view establishes the significance of SAC-HNPs, setting the stage for designing efficient and sustainable heavy-metal-free photocatalyst nanoparticles for numerous applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗