Movement with light: Photoresponsive shape morphing of printed liquid crystal elastomers
Not Available
3D printing↗
SEARCH · Search NASA
Results for “shape morphing”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Architected Liquid Crystal Elastomer Lattices with Programmable Energy Absorption
Architected LCE lattices are fabricated with flow-induced alignment via direct ink writing and systematically characterized their shape morphing, stiffness, and energy absorption behavior across strain rates spanning six orders of magnitude from 10 −3 to 10 3 s −1 . It is shown that architected liquid crystal elastomer (LCE) lattices exhibit superior energy absorption compared to their non-mesogenic (silicone) counterparts. Importantly, the LCE-to-silicone energy absorption ratios are up to 18-fold higher at the highest strain rate tested. A finite element model that captures their shape-morphing response is developed, which exhibits excellent agreement with the experimental observations. In conclusion, the work opens new avenues for designing and fabricating LCE lattices with programmable alignment, shape morphing, and mechanics.
active lattices↗
Versatile Liquid Crystal Elastomer Formulations Using Amine-Acrylate Chemistry and Processing for Advanced Manufacturing
This study aims to tune rheological properties of liquid crystal elastomers (LCEs) through a strategic approach, leveraging the differing reaction rates of thiols and primary and secondary amines with acrylate monomers or the inclusion of processing additives to enable amenability to advanced manufacturing. We found that varying the time of oligomerization at elevated temperatures of amine-functional monomers with acrylate-functional monomers enabled simple control of rheological properties. Additionally, we could also control rheological properties by introducing reinforcing fillers or organic solvents. By varying the oligomerization conditions, we achieved a broad range of viscosities, from 1.1 Pa s to 560 Pa s as measured at 60 °C. When the rheological properties were varied through the incorporation of various solid and liquid inclusions, viscosities could range from less than 1 Pa s to nearly 1000 Pa s when measured at 60 °C. The shape morphing capabilities that are intrinsic to LCEs and the mechanical properties were also characterized. Here, we find that the oligomerization conditions and the addition of fillers influence shape morphing and energy absorption, as characterized by the stress–strain characteristics, further suggesting their potential to be used in energy dissipation applications where performance can be turned. Last, we demonstrate how the range of accessible rheological properties grants formulations amenable to various advanced manufacturing techniques.
Liquid chromatography↗
Spatially programmed alignment and actuation in printed liquid crystal elastomers
Liquid crystal elastomers (LCEs) exhibit reversible shape morphing behavior when cycled above their nematic-to-isotropic transition temperature. During extrusion-based 3D printing, LCE inks are subjected to coupled shear and extensional flows that can be harnessed to spatially control the alignment of their nematic director along prescribed print paths. Here, we combine experiment and modeling to elucidate the effects of ink composition, nozzle geometry, and printing parameters on director alignment. From rheological measurements, we quantify the dimensionless Weissenberg number ( Wi ) for the flow field each ink experiences as a function of printing conditions and demonstrate that Wi is a strong predictor of LCE alignment. We find that director alignment in LCE filaments printed through a tapered nozzle varies radially when Wi < 1, while it is uniform when Wi ≫ 1. Based on COMSOL simulations and in operando X-ray measurements, we show that LCE inks printed through nozzles with an internal hyperbolic geometry exhibit a more uniform director alignment for a given Wi compared to those through tapered nozzles. Concomitantly, the stiffness along the print direction and actuation strain of printed LCEs increases substantially under such conditions. By varying Wi during printing through adjusting the flow rate “on the fly”, LCE architectures with uniform composition, yet locally encoded shape morphing transitions can be realized.
36 MATERIALS SCIENCE↗
Material assembly from collective action of shape-changing polymers
Some animals form transient, responsive and solid-like ensembles through dynamic structural interactions. These ensembles demonstrate emergent responses such as spontaneous self-assembly, which are difficult to achieve in synthetic soft matter. In this work, we use shape-morphing units comprising responsive polymers to create solids that self-assemble, modulate their volume and disassemble on demand. The ensemble is composed of a responsive hydrogel, liquid crystal elastomer or semicrystalline polymer ribbons that reversibly bend or twist. The dispersions of these ribbons mechanically interlock, inducing reversible aggregation. The aggregated liquid crystal elastomer ribbons have a 12-fold increase in the yield stress compared with cooled dispersion and contract by 34% on heating. Ribbon type, concentration and shape dictate the aggregation and govern the global mechanical properties of the solid that forms. Coating liquid crystal elastomer ribbons with a liquid metal begets photoresponsive and electrically conductive aggregates, whereas seeding cells on hydrogel ribbons enables self-assembling three-dimensional scaffolds, providing a versatile platform for the design of dynamic materials.
36 MATERIALS SCIENCE↗
Alignment switching in 3D-printed smectic liquid crystal elastomers
Extrusion-based additive manufacturing has emerged as a powerful platform for designing shape-morphing materials through controlled orientation. However, existing approaches primarily rely on a single mode of flow-induced alignment, limiting orientation programmability. Herein, we present a direct-ink-writing approach for smectic liquid crystal elastics that exploits two distinct alignment modes within a single ink. The smectic ink exhibits shear- and temperature-dependent orientation switching, enabling molecular alignment either perpendicular or parallel to the print direction. Combined rheological, X-ray, and molecular dynamics analyses reveal that this alignment inversion arises from the preservation or collapse of smectic layers under flow. This reversible switching encodes both contractile and elongational actuation within individual filaments, greatly expanding the design freedom of printed liquid crystal elastomers. We demonstrate 2D and 3D structures with diverse programmed shape transformations, highlighting the potential of this platform for adaptive soft actuators and architected functional materials.
Lee, Jin Hyeong [Pusan National University, Busan,↗
Functional stimuli-responsive polymers on micro- and nano-patterned interfaces
Micro- and nano-patterned surfaces offer precise control over morphology and chemical composition, enhancing the stability, durability, and functionality of coating materials. When combined with stimuli-responsive polymers, these surfaces gain dynamic adaptability, enabling reversible binding, reusable sensing, and selective molecular capture. Furthermore, while recent review articles have explored various aspects of stimuli-responsive materials, from hydrogel patterns for bioanalytical applications to shape-morphing hydrogels for soft robotics and sensors, a comprehensive review focused on the integration of smart polymers with micro- or nano-patterned interfaces remains absent. This review addresses key surface patterning techniques, including soft lithography, colloidal lithography, and polymer brush photolithography, as well as advances in surface-initiated polymerization methods, such as surface-initiated controlled radical polymerization (SI-CRP). In addition, we discuss recent progress in integrating stimuli-responsive polymers with patterned surfaces to create advanced, functional materials.
Colloidal lithography↗
Simulation of Channel Flow with Square Ribs for Blanket First-Wall Cooling: Geometry-Specific Tuning of k-ω Model Using Adjoint Method
Cooling of the plasma-facing first wall is challenging in the design of blanket components because of the high heat flux (on the order of 𝑀𝑊/𝑚2) from the plasma, especially when a low thermal mass medium like helium is chosen as the coolant. Therefore, heat transfer enhancement in which the convective heat transfer rate is augmented by the addition of turbulence-promoting structures becomes a key initiative for providing sufficient cooling capability with helium. Previously, computational fluid dynamics simulations had been performed on pipe flows with different transverse and longitudinal ribbed geometries at Oak Ridge National Laboratory to compare the enhancement performance among different ribbed geometries. Rib shape morphing had been conducted to obtain an optimized rib profile. In the work presented here, the adjoint method is adopted in the ANSYS Fluent solver for turbulence model augmentation, and the Generalized k-ω (GEKO) turbulence model is employed because of its ability of tuning the turbulence model. The Nusselt number and pressure drop obtained from the channel flow with bottom ribbed wall experiments are used as the targets. Sensitivity analysis provides information as guidance to improve the turbulence model accuracy. The augmented GEKO model is tuned for the studied ribbed channel geometry and flow conditions, providing improved predictive accuracy within this context. Extension to other configurations offers potential but may require additional tuning and validation.
Xu, Tracy [ORNL] (ORCID:0009000193700887)↗
Shear Response of Ionizable Polymer Melts at the Crossover from Ionomers to Polyelectrolytes
Nonlinear shear response of polymers is affected by inherent barriers for diffusive motion, including entanglements and topology. In ionizable polymers, ionic clusters further constrain the intrinsic dynamics of the polymers, significantly enhancing their viscosity. Here, using fully atomistic molecular dynamics simulations, the nonlinear shear response of ionizable polymers is presented, across the transition from the ionomer regime where distinctive clusters dominate the structure to the polyelectrolyte regime where clusters percolate, in polystyrene randomly sulfonated with fractions of SO 3 − groups of f = 0.20 and 0.35, in pristine and tetrahydrofuran (THF) swollen polyelectrolyte melts. For f = 0.20, the ionic clusters first fracture into smaller clusters followed by splitting into individual ionic groups and eventually reform. At higher f, the clusters morph in shape but do not break under high shear. At very high shear rates, all of the chains stretch and recoil rapidly. As the shear rate is reduced, some chains stretch and recoil, while others remain largely unaffected by the shear. Macroscopically, for all systems, the shear viscosity displays initially an elastic response, followed by nonlinear shear stress overshoot and, eventually, a steady state. The evolution of viscosity with time and shear reflects that of the ionizable domains.
cluster chemistry↗
Self-assembly of wood-based shape memory composites triggered by solar-thermal energy
Transporting and assembling large, complex structures poses significant challenges due to their size, geometry, and cost. Additionally, the installation sites are often inaccessible or hazardous for humans, necessitating self-assembling capabilities in these structures. To mitigate these challenges, we propose using 3D printing materials with shape memory effect (SME) for both transport and construction. This approach involves developing 3D modular components into flat sheets for easier transportation, and then self-assembling into 3D structures on-site using solar energy. To gain a deeper understanding of the factors influencing material memory performance, we have chosen a composite PLA/WF, which is polylactic acid (PLA) with 20 wt% wood flour (WF) for this purpose, leveraging its high tensile modulus at 0.966 GPa, low cost, and sustainability. Printed shapes with this material can maintain a recovery ratio over 90% after 3 cycles. While traditional composites fillers (e.g. glass or carbon fiber) are added to enhance mechanical and thermal properties, the addition of bio-based fillers like WF accomplish similar goals without compromising sustainability. We conducted multiple experiments to demonstrate how environmental conditions (i.e. temperature) maximize the material’s SME. Although still at an early stage, this study provides initial insights into bridging the gap between the small-scale nature of shape memory polymers (SMPs) and their potential for large-scale additive manufacturing, addressing a critical need for efficient and sustainable construction. In the long term, we hope our study contributes to the design vision of utilizing SMPs for transportation, assembly, and deployment of complex structures, providing a new pathway for sustainable construction and transportation of large-scale structures to hard-to-access locations such as disaster-affected areas and remote deserts, etc.
4D printing↗
3D polycatenated architected materials
Architected materials derive their properties from the geometric arrangement of their internal structural elements. Their designs rely on continuous networks of members to control the global mechanical behavior of the bulk. Here, in this study, we introduce a class of materials that consist of discrete concatenated rings or cage particles interlocked in three-dimensional networks, forming polycatenated architected materials (PAMs). We propose a general design framework that translates arbitrary crystalline networks into particle concatenations and geometries. In response to small external loads, PAMs behave like non-Newtonian fluids, showing both shear-thinning and shear-thickening responses, which can be controlled by their catenation topologies. At larger strains, PAMs behave like lattices and foams, with a nonlinear stress-strain relation. At microscale, we demonstrate that PAMs can change their shapes in response to applied electrostatic charges. The distinctive properties of PAMs pave the path for developing stimuli-responsive materials, energy-absorbing systems, and morphing architectures.
36 MATERIALS SCIENCE↗