SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Hydrogen fire detection system discovers fires by detecting the flickering ultraviolet radiation emitted by the OH molecule, a short-lived intermediate combustion product found in hydrogen-air flames. In a space application, the system discriminates against false signals from sunlight and rocket engine exhaust plume radiation.
The collision induced spectra of HD and H2 are studied. Their application to the study of planetary (and planetary satellite) atmospheres is investigated.
High-order surface reconstruction is now a commonly used technique for mesh generation and adaptation, geometric and physical modeling, and high-order numerical methods for solving partial differential equations (PDEs). However, surface reconstruction from a relatively coarse mesh remained a challenging problem, especially for surfaces with sharp features. Here in this paper, we introduce a new method to address this challenge by improving the previous state of the art, including continuous moving frames (CMF) and weighted averaging of local fittings (WALF) (Eng Comput 28 (2012)), in two aspects. First, we significantly improve the robustness of reconstruction from coarse meshes using a Hermite-style least squares approximation to incorporate normals of the surface and tangents of the feature curves. Second, we ensure both G 0 continuity and high-order accuracy of the reconstruction near sharp features by generating parametric surface elements with an iterative feature-aware parameterization. We present the theoretical framework of our method and compare it against point-based methods in terms of accuracy and stability. We demonstrate the use of the proposed technique in generating high-order meshes for finite element methods, and show that it enables nearly identical solutions as using the meshes generated from exact geometry, while allowing additional flexibility.
XMM-Newton acquired data on the accepted target, 1H0707-495, on 2002 October 13 during revolution 0521. The observation was successful, with only about 5% data loss due to background flaring. We compared the data from this observation with earlier data taken on this Narrow-Line Seyfert 1 about two years before, performing interpretation studies in the context of the partial-covering model. Our second longer observation once again displays a sharp (< 200 eV) spectral drop above 7 keV. However, in comparison to the first observation, the edge depth and energy have changed significantly. In addition to changes in the edge parameters, the high-energy spectrum appears steeper. The changes in the high-energy spectrum can be adequately explained in terms of a partial-covering absorber out-flowing from the central region. The low-energy spectrum also shows significant long-term spectral variability, including (1) a substantial increase in the disk temperature, (2) detection of an approx. 0.9 keV emission feature, and (3) the presence of ionized absorption that was detected during the ASCA mission. The large increase in disk temperature, and the more modest rise in luminosity, can be understood if we consider a slim-disk model for 1H0707-495. In addition, the higher disk luminosity could be the driving force behind the outflow and the re-appearance of an ionized medium during the second XMM-Newton observation.
Exact analytic calculation shows that optimal control protocols for passive molecular systems often involve rapid variations and discontinuities. However, similar analytic baselines are not generally available for active-matter systems, because it is more difficult to treat active systems exactly. Here we use machine learning to derive efficient control protocols for active-matter systems, and find that they are characterized by sharp features similar to those seen in passive systems. We show that it is possible to learn protocols that effect fast and efficient state-to-state transformations in simulation models of active particles by encoding the protocol in the form of a neural network. We use evolutionary methods to identify protocols that take active particles from one steady state to another, as quickly as possible or with as little energy expended as possible. Our results show that protocols identified by a flexible neural-network ansatz, which allows the optimization of multiple control parameters and the emergence of sharp features, are more efficient than protocols derived recently by constrained analytical methods. Our learning scheme is straightforward to use in experiment, suggesting a way of designing protocols for the efficient manipulation of active matter in the laboratory.
A study has been conducted of eight white dwarfs, including seven DA and one He-rich types. The study is based on high-resolution observations conducted with the aid of the International Ultraviolet Explorer. Four of the dwarfs show features related to heavy elements which are not interstellar in origin. It is tentatively suggested that, at least in the hottest low-gravity DA white dwarfs, the observed narrow-lined features are formed in expanding halos or winds associated with the white dwarfs. Theoretically, stable white dwarf halos should actually be coronae with temperatures in excess of 1,000,000 K. However, the observed narrow-lined features do not suggest such high temperatures. The observed radial velocities suggest weak stellar winds in two hot white dwarfs, namely, G191-B2B and 2111+49. It is tentatively proposed that radiative levitation can explain the appearance of the observed metallic lines in the hot DA white dwarfs.
Controlling the multi-level assembly and morphological properties of conjugated polymers through structural manipulation has contributed significantly to the advancement of organic electronics. In this work, a redox active conjugated polymer, TPT–TT, composed of alternating 1,4-(2-thienyl)-2,5-dialkoxyphenylene (TPT) and thienothiophene (TT) units is reported with non-covalent intramolecular S⋯O and S⋯H–C interactions that induce controlled main-chain planarity and solid-state order. As confirmed by density functional theory (DFT) calculations, these intramolecular interactions influence the main chain conformation, promoting backbone planarization, while still allowing dihedral rotations at higher kinetic energies (higher temperature), and give rise to temperature-dependent aggregation properties. Thermotropic liquid crystalline (LC) behavior is confirmed by cross-polarized optical microscopy (CPOM) and closely correlated with multiple thermal transitions observed by differential scanning calorimetry (DSC). This LC behavior allows us to develop and utilize a thermal annealing treatment that results in thin films with notable long-range order, as shown by grazing-incidence X-ray diffraction (GIXD). Specifically, we identified a first LC phase, ranging from 218 °C to 107 °C, as a nematic phase featuring preferential face-on π–π stacking and edge-on lamellar stacking exhibiting a large extent of disorder and broad orientation distribution. A second LC phase is observed from 107 °C to 48 °C, as a smectic A phase featuring sharp, highly ordered out-of-plane lamellar stacking features and sharp tilted backbone stacking peaks, while the structure of a third LC phase with a transition at 48 °C remains unclear, but resembles that of the solid state at ambient temperature. Furthermore, the significance of thermal annealing is evident in the ∼3-fold enhancement of the electrical conductivity of ferric tosylate-doped annealed films reaching 55 S cm −1 . More importantly, thermally annealed TPT–TT films exhibit both a narrow distribution of charge-carrier mobilities (1.4 ± 0.1) × 10 −2 cm 2 V −1 s −1 along with a remarkable device yield of 100% in an organic field-effect transistor (OFET) configuration. This molecular design approach to obtain highly ordered conjugated polymers in the solid state affords a deeper understanding of how intramolecular interactions and repeat-unit symmetry impact liquid crystallinity, solution aggregation, solution to solid-state transformation, solid-state morphology, and ultimately device applications.
A study of the layered triangular lattice materials K 2 Co(SeO 3 ) 2 and Rb 2 Co(SeO 3 ) 2 is reported here. These isostructural compounds crystallize in the trigonal space group R-3m (No. 166). The magnetic Co 2+ ions form a spin-1/2 triangular lattice and display strongly frustrated magnetism. We find no evidence in the susceptibility or heat capacity for in-plane ordering of the spins; rather the in-plane inverse susceptibility is typical of that seen for frustrated magnets. At around 10 K, a ferromagnetic component appears in the magnetic susceptibility perpendicular to the triangular planes. The heat capacity at low applied fields does not show sharp features, but in larger applied fields a sharp ferromagneticlike transition appears. Field- and direction-dependent magnetization measurements at 2 K indicate that both materials have a magnetic easy axis perpendicular to the triangular planes. The magnetic properties are sensitive to the field applied perpendicular to the triangular planes, which induces a metamagnetization transition at 0.75 T. Spin polarization develops along with the increasing out-of-plane field, resulting in a saturated ferromagnetic state at high fields. In contrast, the magnetic properties are resistant to the in-plane field. Our results suggest that these materials are embodiments of Ising spins on triangular lattices with easy-axis anisotropy.
Features in the inflationary landscape can inject extra energies to inflation models and produce on-shell particles with masses much larger than the Hubble scale of inflation. This possibility extends the energy reach of the program of cosmological collider physics, in which signals associated with these particles are generically Boltzmann-suppressed. Here we study the mechanisms of this classical cosmological collider in two categories of primordial features. In the first category, the primordial feature is classical oscillation, which includes the case of coherent oscillation of a massive field and the case of oscillatory features in the inflationary potential. The second category includes any sharp feature in the inflation model. All these classical features can excite unsuppressed quantum modes of other heavy fields which leave observational signatures in primordial non-Gaussianities, including the information about the particle spectra of these heavy degrees of freedom.
In quantum magnets, magnetic moments fluctuate heavily and are strongly entangled with each other, a fundamental distinction from classical magnetism. Here, with inelastic neutron scattering measurements, we probe the spin correlations of the honeycomb lattice quantum magnet YbCl 3 . A linear spin wave theory with a single Heisenberg interaction on the honeycomb lattice, including both transverse and longitudinal channels of the neutron response, reproduces all of the key features in the spectrum. In particular, we identify a Van Hove singularity, a clearly observable sharp feature within a continuum response. The demonstration of such a Van Hove singularity in a two-magnon continuum is important as a confirmation of broadly held notions of continua in quantum magnetism and additionally because analogous features in two-spinon continua could be used to distinguish quantum spin liquids from merely disordered systems. These results establish YbCl 3 as a benchmark material for quantum magnetism on the honeycomb lattice.
A variety of Asymmetrical Capacitor Thrusters has been built and tested at the Institute for Scientific Research (ISR). The thrust produced for various voltages has been measured, along with the current flowing, both between the plates and to ground through the air (or other gas). VHF radiation due to Trichel pulses has been measured and correlated over short time scales to the current flowing through the capacitor. A series of designs were tested, which were increasingly efficient. Sharp features on the leading capacitor surface (e.g., a disk) were found to increase the thrust. Surprisingly, combining that with sharp wires on the trailing edge of the device produced the largest thrust. Tests were performed for both polarizations of the applied voltage, and for grounding one or the other capacitor plate. In general (but not always) it was found that the direction of the thrust depended on the asymmetry of the capacitor rather than on the polarization of the voltage. While no force was measured in a vacuum, some suggested design changes are given for operation in reduced pressures.
If time-dependent disruptions from slow-roll occur during inflation, the correlation functions of the primordial curvature perturbation should have scale-dependent features, a case which is marginally supported from the cosmic microwave background (CMB) data. We offer a new approach to analyze the appearance of such features in the primordial bispectrum that yields new consistency relations and justifies the search of oscillating patterns modulated by orthogonal and local templates. Under the assumption of sharp features, we find that the cubic couplings of the curvature perturbation can be expressed in terms of the bispectrum in two specific momentum configurations, for example local and equilateral. This allows us to derive consistency relations among different bispectrum shapes, which in principle could be tested in future CMB surveys. Furthermore, based on the form of the consistency relations, we construct new two-parameter templates for features that include all the known shapes.
Here, we present results of 2D axisymmetric core-collapse supernova simulations, employing the FORNAX code, of nine progenitor models spanning 12 to 25 M⊙. Four of the models explode with inelastic scattering off electrons and neutrons as well as the many-body correction to neutrino-nucleon scattering opacities. We show that these four models feature sharp Si–O interfaces in their density profiles, and that the corresponding dip in density reduces the accretion rate around the stalled shock and prompts explosion. The non-exploding models lack such a steep feature, highlighting the Si–O interface as one key to explosion. Furthermore, we show that all of the non-exploding models can be nudged to explosion with modest changes to macrophysical inputs, including moderate rotation and perturbations to infall velocities, as well as to microphysical inputs, including reasonable changes to neutrino-nucleon interaction rates, suggesting that all the models are perhaps close to criticality. Exploding models have energies of a few × 10 50 erg at the end of our simulation, and are rising, emphasizing the need to continue these simulations over larger grids and for longer times to reproduce the energies seen in nature. Morphology of the explosion contributes to the explosion energy, with more isotropic ejecta producing larger explosion energies. We do not find evidence for the Lepton-number Emission Self-sustained Asymmetry. Finally, we look at proto-neutron star (PNS) properties and explore the role of dimension in our simulations. We find that convection in the PNS produces larger PNS radii as well as greater ‘ν μ ’ luminosities in 2D compared to 1D.
Superb photographs of King Crater were returned by the Apollo 16 crew. The metric and panoramic cameras provided stereoscopic coverage with which high quality topographic maps may be made. King crater, approximately 75 km in diameter and, on the average, 3.8 km deep, is among the most significant features photographed and visually studied from lunar orbit on the Apollo 16 mission. It is the freshest crater on the far side in its size range and has several unique characteristics. (1) Although its ejecta blanket displays very sharp features, the crater does not appear to have extensive ray systems and secondary crater chains. (2) As depicted for the first time by Apollo 16 photographs, the ejecta blanket is strewn with numerous flow fronts and scarps. (3) A flat and smooth, dark, lavalike deposit 15 km across is on the northern rim of the crater. (4) The central peak of the crater is a Y-shaped structure that begins at the southern rim. (5) Bright units that are aligned with the central peak on the northern wall and rim suggest that a preexisting tabular body was excavated by the cratering process.
Detecting a deviation from a featureless primordial power spectrum of fluctuations would give profound insight into the physics of the primordial Universe. Depending on their nature, primordial features can either provide direct evidence for the inflation scenario or pin down details of the inflation model. Thus far, using the cosmic microwave background (CMB) we have only been able to put stringent constraints on the amplitude of features, but no significant evidence has been found for such signals. Here we explore the limit of the experimental reach in constraining such features using 21 cm tomography at high redshift. A measurement of the 21 cm power spectrum from the Dark Ages is generally considered as the ideal experiment for early Universe physics, with potentially access to a large number of modes. We consider three different categories of theoretically motivated models: the sharp feature models, resonance models, and standard clock models. We study the improvements on bounds on features as a function of the total number of observed modes and identify parameter degeneracies. The detectability depends critically on the amplitude, frequency and scale-location of the features, as well as the angular and redshift resolution of the experiment. We quantify these effects by considering different fiducial models. Our forecast shows that a cosmic variance limited 21 cm experiment measuring fluctuations in the redshift range 30 ≤ z ≤ 100 with a 0.01-MHz bandwidth and sub-arcminute angular resolution could potentially improve bounds by several orders of magnitude for most features compared to current Planck bounds. At the same time, 21 cm tomography also opens up a unique window into features that are located on very small scales.
Since 2001, 3D microfabrication based on two‐photon polymerization (TPP) has drawn extensive attention and interest in biology, optics, photonics, material science, and high‐energy physics. The in‐volume fabrication capability due to the threshold behavior of two‐photon absorption enables TPP higher flexibility compared with other nanofabrication techniques. However, as determined by the in‐volume fabrication feature as well as various reaction dynamics, the writing characteristics of TPP, such as throughput, accuracy, surface quality, and fabrication capability, are still limited. Herein, a comprehensive study is performed on the spatiotemporal behavior of reaction dynamics during TPP fabrication, mainly focusing on spatiotemporal characteristics of radical diffusion, photothermal effect, microscale mechanics, and voxel stacking process. Based on the study, a nonsequential fabrication method is established to simultaneously improve key writing characteristics of TPP and realize sharp features, high speeds, large overhang structure, and smooth surfaces. The method established in this work can be applied to improve the performance of functional devices for various fields.
For crystal plasticity formulation neglecting the strain gradients at the dislocation scale, backstresses are necessary to satisfy the mesoscopic stress equilibrium and strain compatibility requirements. Backstresses in a material point and those between neighboring points are treated separately. Physically backstresses can dynamically induce either hardening or softening effects to adjust the dislocation hardening of slip systems, whereas the sum of the stresses resulting in backstresses in the representative volume element (RVE) is zero. Backstress hardening suppresses certain slip activities, while backstress softening triggers excess dislocations. A two-phase brass is studied. Backstresses make the hard phase deform smaller and the soft phase deform more than those without employing backstresses in a model. In the former, more homogeneous lattice strain and higher yield stress are obtained. Backstress has limited effects on the evolution of the critical resolved shear stress and crystallographic texture. Furthermore, it is a major cause of the banded structures featuring sharp crystallographic contrasts which are not parallel to the slip planes. Tests indicate that backstress induces a serrated behavior at the early stages of deformation and induces the geometrically necessary bands (GNBs), which are parallel to the macroscopic axes.
This article reports on 1D+2V heat pulse propagation studies using the COGENT guiding center kinetic code. The model uses magnetized kinetic ions and a simple Boltzmann electron model. Results agree with previous kinetic and fluid modeling benchmark studies that correspond to the parameters of edge localized modes (ELMs) observed on the JET tokamak. The plasma parameters for the edge pedestal and ensuing ELM dynamics are in the low collisionality regime. Hence, the dominant balance between the assumed Maxwellian ELM source and collisionless parallel advection causes the ion PDF to develop a significantly anisotropic velocity distribution. Adding nonlinear Coulomb ion-ion collisions to the model acts to smooth the sharp features of the ion distribution function, but the anisotropy remains robust due to the low collisionality.