SEARCH · Search NASA

Results for “shell elements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Selective mass scaling for single-layer thick shell elements in DYNA3D

Hexahedral elements can be adapted to model thin and moderately thick structures by neglecting the coupling of through-thickness stress, resulting in a fully three-dimensional, but simplified, state of stress. These specialized elements, often referred to as “thick” or “solid” shells, are generally employed to model thin-walled structures using continuum mechanics-based material models. In explicit dynamics simulations, where computational speed is important, these elements are integrated with a single quadrature point and a set of anti-hourglassing (stabilizing) forces. Thick shells, by definition, have a thickness dimension smaller than their in-plane dimensions, and this small thickness often determines the stable time step size in simulations, despite the mechanics being approximated. To alleviate this limitation while retaining the relevant dynamics of thin-walled structures, selective mass scaling (SMS), or selective mass “augmentation,” has been proposed in the literature. In this technical report, we explore the application of SMS to single-layer thick shells in the simulation software DYNA3D.

42 ENGINEERING↗

DOE OSTI2025

Renewable Activated Carbon Sorbent for the Desulfurization of Liquid Fuels

In recent years, significant efforts have been devoted to the reduction of sulfur levels in transportation fuels in order to reach regulatory limits and reduce the emission of harmful SO x into the atmosphere. In particular, adsorptive desulfurization (ADS) has the potential to produce zero-sulfur fuels without the need for a high energy intensity process, high H 2 pressure, and long process times as in the case of other technologies such as hydrodesulfurization. In this work, we have demonstrated the effectiveness of renewable activated carbons derived from food waste (FWAC) for the ADS of model jet and diesel fuels. The optimal FWAC materials were those fabricated to maximize the micropore volume, providing available sites for the adsorption of dibenzothiophene (DBT) and dimethyldibenzothiophene (DMDBT). The FWAC had a greater sulfur adsorption capacity than commercial AC, Y zeolite sorbents, and AC derived from other biomass sources including miscanthus, coconut shell, and walnut shell. Elemental analysis suggests that the inorganic impurities inherent in food waste, notably K, Ca, P, and Na, may contribute to its improved sulfur adsorption compared to other AC materials. Microscopy and X-ray diffraction studies further demonstrated the presence of inorganic species on FWAC that may provide active sites for the chemisorption of sulfur molecules.

Adsorption↗

DOE OSTI2025

Temperature Dependence of 239 Pu NMR Parameters in PuO 2

Solid-state 239 Pu NMR spectra of crystalline PuO 2 have been recorded over temperatures from 11 to 295 K with better than part per thousand resolution. These experiments represent the first independent detection of 239 Pu NMR in PuO 2 since the original report by Yasuoka and co-workers and extend the NMR observations to higher temperatures where recent theoretical explanations of the enigmatic magnetism and electronic structure of PuO 2 may be evaluated. The sensitivity achieved in these experiments was sufficient to measure the sinusoidal dependence of the NMR signal amplitude on the radiofrequency pulse length, which allows the determination of the nuclear g factor and magnetic moment of 239 Pu. These results demonstrate the use of NMR with an open-shell f element to explore subtle magnetic effects in plutonium materials of both technological and scientific significance.

Actinides↗

DOE OSTI2025

Precision Mass Measurements Reveal Low Neutron Pairing in Tin beyond 𝑁=82 and Its Impact on Stellar Nucleosynthesis

We present a study on neutron-rich tin (𝑍 =50) isotopes beyond the doubly closed shell of 𝑁 = 82 through high-precision mass measurements, including the first-ever measurements of the masses of 136 Sn, 137 Sn, and 138 Sn isotopes. These measurements enhance our understanding of the nuclear structure and astrophysical nucleosynthesis in this previously unexplored region. The new mass data are used for evaluation of the final abundances of mass numbers 𝐴 =135 and 137 in 𝑟-process network calculations. Our findings reveal a notable change in the empirical pairing gap for tin isotopes beyond the 𝑁 = 82 closed shell and a shift in the two-neutron-separation energy slope compared to heavier elements above the shell closure. A new set of ab initio calculations effectively describes these observed trends.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

Toward shell model interactions with credible uncertainties

Background: The nuclear shell model is a powerful framework for predicting nuclear structure observables, but relies on interaction matrix elements fit to experimental data as its inputs. Extending the shell model's applicability, particularly toward dripline nuclei, requires efficient fitting methods and credible uncertainty quantification. Traditional approaches face computational challenges and may underestimate uncertainties. Purpose: We develop and test a framework combining eigenvector continuation and Markov chain Monte Carlo to efficiently fit shell model interaction matrix elements and quantify their uncertainties. Methods: Eigenvector continuation is used to emulate shell model calculations, reducing computational costs. The emulator enables Markov chain Monte Carlo sampling to optimize interaction matrix elements and rigorously assess parametric uncertainties. Here, the framework is benchmarked using the USDB interaction in the 𝑠⁢𝑑 shell. Results: The emulator reproduces the USDB interaction with negligible error, validating its use in shell model fitting applications. However, we find that to obtain credible predictive intervals, the model defect of the shell model itself, rather than experimental or emulator error, must be taken into account in order to obtain credible uncertainties. Conclusions: The proposed framework provides an efficient and rigorous approach for fitting shell model interactions and quantifying uncertainties. Further, the normality assumption used in the past appears sufficient to describe the distribution of interaction matrix elements. However, it is crucial to account for model correlations to avoid underestimating uncertainties.

Nuclear forces↗

DOE OSTI2025

Bim-to-fea Conversion Program

The purpose of this program is to enable interoperability between BIM-based architectural design software (i.e., Revit, ArchiCAD, AVEVA E3D) to structural analysis software (i.e., SAP2000). The program takes in BIM building model data via the IFC file format, automatically transforms the architectural coordination entities (structural beams, columns, slabs, walls) to structural analysis entities (i.e., finite element space frames and shells), automatically adjusts the connectivity of the structural analysis entities, and finally exports the structural analysis entities as a structural analysis model contained within a new IFC file. For example, a 3D building in Revit can be exported to an IFC file, run through this BIM-to-FEA program, then the exported IFC can be inputted into SAP2000.

Crowder, Nicholas [Idaho National Laboratory (INL)↗

DOE OSTI2025

A critical verification of beam and shell models of wind turbine blades

Ever-increasing wind turbine size has challenged predictive capabilities on several fronts. Here, to address part of the blade structural modeling uncertainty, a systematic model fidelity comparison study was conducted on commonly used finite elements. pyNuMAD was utilized to create beam, shell, and solid models of a 100 m long blade undergoing large static deflections. The solid model avoided the use of layered-solid elements by resolving core and facesheet layers. An unprecedented model with 73.7 million elements revealed insights that have never been possible from prior experimental and numerical studies. As compared to the solid element model, the tip deflection from the shell and beam model was found to be about 2% and 4.3% too low, respectively. The twist from the beam model was found to be about 5.6% too high, while the twist from shell model was 24% too low, though improvement was demonstrated with mesh refinement. The beam model adhesive stresses were more accurate than the shell model. Out-of-plane stresses were of great significance near geometric and material discontinuities, and neither the shell nor beam model captured these effects well. Failure predictions from beam, shell, or layered-solid models are unlikely to be reliable at trailing edges, adhesives, ply-drops, spar-cap boundaries.

17 WIND ENERGY↗

DOE OSTI2025

Implications of a weakening N = 126 shell closure away from stability for r -process astrophysical conditions

The formation of the third r-process abundance peak near A ∼ 195 is highly sensitive to both nuclear structure far from stability and the astrophysical conditions that produce the heaviest elements. In particular, the N = 126 shell closure plays a crucial role in shaping this peak. Experimental data hints that the shell weakens as proton number departs from Z = 82, a trend largely missed by global mass models. To investigate its impact on r-process nucleosynthesis, we employ both standard global models with strong closures and modified Duflo-Zuker (DZ) models that reproduce the weakening, combined with three sets of β − -decay rates. Strong shell closures generate sharply peaked abundances, whereas weakened closures consistent with the experimental trend produce broader, flatter patterns. Accurately reproducing the solar third peak under weakened shell strength requires sufficiently neutron-rich conditions that significant fission occurs, and slower decay rates. These results demonstrate that a weakening N = 126 shell closure away from stability imposes significant constraints on the astrophysical environments of the r-process and underscores the need for precise mass measurements and improved characterization of β − -decay properties in this region.

N = 126 closed shells↗

DOE OSTI2025

Impact of the Latest 22 Ne+ α Reaction Rates on Nucleosynthesis in Massive Stars and Galactic Chemical Evolution

In massive stars (initial mass of ≳9 M ⊙ ), the weak s- (slow neutron capture) process produces elements between Fe and Zr, enriching the Galaxy with these elements through core-collapse supernova explosions. The weak s-process nucleosynthesis is driven by neutrons produced in the 22 Ne(α, n) 25 Mg reaction during convective He core and C shell burning. The yields of heavy elements thus depend on the 22 Ne(α, n) 25 Mg and the competitive 22 Ne(α, γ) 26 Mg reaction rates, which are dominated by several narrow-resonance reactions. While the accuracy of these rates has been under debate for decades, recent experimental efforts, including ours, drastically reduced these uncertainties. In this work, we use a set of 280 massive star nucleosynthesis models calculated using different 22 Ne(α, n) 25 Mg and 22 Ne(α, γ) 26 Mg rates and a galactic chemical evolution (GCE) study to probe their impact on the weak s-process elemental abundances in the Galaxy. The GCE was computed with the OMEGA+ code, using the new sets of stellar yields with different 22 Ne+α rates. From GCE, we find that these rates are causing up to 0.45 dex of variations in the [Cu/Fe], [Ga/Fe], and [Ge/Fe] ratios predicted at solar metallicity. The greatest impact on the stellar nucleosynthesis and GCE results derives from uncertainties in the (α, n) strength (ωγ (α,n) ) of the E x = 11.32 MeV resonance. We show that variations observed in the GCE calculations for weak s-process elements become negligibly smaller than dispersions found in observations once the ωγ (α,n) is accurately determined within the uncertainty of 10%–20% (typically reported experimental errors for the resonance) in future nuclear physics experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2026

Impact of atomic substitution on core-hole relaxation dynamics: A study of Br 2 and IBr

Understanding inner-shell decay processes in heavy-element molecules is essential for unraveling x-ray-induced photodynamics and advancing molecular imaging techniques. Here, in this study, we investigate the influence of atomic substitution on core-hole relaxation dynamics and molecular fragmentation in Br 2 and IBr, initiated by x-ray ionization absorption at the Br K-edge. Using a combination of x-ray/ion coincidence measurements and Monte Carlo/molecular dynamics simulations, we track the charge distribution and the kinetic energy release (KER) of fragment ions with a total charge from 2+ to 8+. For both molecules, the simulated KER values show good agreement with experiment across different fragmentation channels. Our comparison reveals that substituting Br with the heavier I atom in IBr has a minimal impact on the inner-shell electronic decay process but significantly influences nuclear motion, leading to slower dissociation and thus a KER close to the Coulomb limit—an effect attributed to the atomic mass. These findings highlight the interplay between electronic and nuclear effects in molecular fragmentation, particularly in heavy-element species, and provide new insights into medical therapies, structural biology, and astrophysics.

Bhat, Nivedita [Argonne National Laboratory (ANL),↗

DOE OSTI2026

Production of Heavy α -Elements and 44 Ti in Cas A: Comparison to Abundances from 1D Core-collapse Supernova Models and Evidence for Carbon–Oxygen Shell Mergers

The merger between the carbon (C) and oxygen (O) shells hours to days before the collapse of a massive star significantly changes its nucleosynthesis, which is reflected in the elemental ratios observed in supernova remnants (SNRs). We present a nucleosynthesis study of 44 Ti production in core-collapse supernovae (CCSNe), highlighting large silicon (Si), sulfur (S), calcium (Ca), and, most importantly, argon (Ar) to neon (Ne) ratios as diagnostics for carbon–oxygen (C–O) shell mergers. We compare yields from eight different sets of CCSNe models to observations of Cassiopeia A (Cas A), and show that C–O shell mergers are consistently the models that best match X-ray and infrared observations. These models produce high Ar/Ne ratios (≳0.1), due to 20 Ne depletion and production of 36 Ar and 38 Ar, while lower ratios are obtained from nonmerger cases. Based on the Ar/Ne diagnostic, we compare the range of expected 44 Ti produced by C–O shell mergers, which is up to ∼20%–30% of the overall 44 Ti, but expected to be located outside the reverse shock. Based on the sets of models considered, the photon flux expected from the 44 Ti synthesized in the C–O shell merger in Cas A is below the NuSTAR and COSI detection limits, compatible with current limits locating most of the 44 Ti interior to the reverse shock, but might be detectable from proposed missions like ASCENT. Finally, for the SNR of 1987A, a dominant C–O merger origin of the observed 44 Ti is unlikely based on the observed redshift in its 44 Ti line.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Prototype X-ray and Gamma Detection with Cyclotron Radiation Emission Spectroscopy

Cyclotron radiation emission spectroscopy, or CRES, is a novel approach to measuring the energy of an electron. By trapping a free electron in a high magnetic field, it undergoes cyclotron motion and emits radiofrequency (RF) waves. The frequency of this RF radiation is directly related to the energy of the electron. Because many cycles of the RF emission are recorded, the energy resolution of the CRES system is on the order of a single electron volt. To make a CRES system sensitive to photons, a target gas is used to induce a photoelectric effect, producing the electron that is subsequently trapped. By adding the binding energy of the target atom, the energy of the incident photon may be reconstructed. Using a xenon target gas, photoelectric interactions dominate up to approximately 300 keV, covering not only all atomic shell X-rays of the elements, but many low-lying nuclear states as well, including key transuranic elements related to nuclear security. CRES holds the potential of maintaining single-eV resolution up to this 300-keV range, thereby surpassing current state-of-the-art detectors by a factor of 10-100. The instrumental resolution of the system is limited by the uniformity of the applied magnetic field.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2024

Neutrinoless Double-Beta Decay Investigations of 82Se Using Three Shell Model Hamiltonians

Neutrinoless double-beta decay is considered one of the most promising processes that would help clarify some of the symmetry-breaking problems in our understanding of the observable universe. Recent studies of neutrinoless double-beta decay matrix elements have employed statistical approaches based on modified shell model effective Hamiltonians for 48Ca (Phys. Rev. C 106, 054302 (2022)) and 136Xe (Phys. Rev. C 107, 045501 (2023)). The analyses rely on inducing perturbations in the starting effective Hamiltonians to observe the behavior of a wide range of observables, besides the 0νββ) NME, that are compared with experimental data. Following a Bayesian model averaging approach, the range of probable values for the neutrinoless double-beta decay matrix elements is presented. In this paper, we present a similar study for 82Se, which is described in the same model space as 76Ge that is under experimental observation. Due to its faster calculation time compared to 76Ge, 82Se can be used as an appropriate substitute in our complex statistical study. Using the calculations performed for the statistical analysis of the neutrinoless double-beta decay matrix elements, we also search for the correlations between the observables that we can compare to experimental data.

Science & Technology - Other Topics↗

DOE OSTI2024

Impact of tensor forces on quasifission product yield distributions

Quantum shell effects are crucial for the stability and structure of atomic nuclei and play a key role in the discovery of superheavy elements. Furthermore, during nuclear collisions, the dynamical evolution of these shell effects disrupts the equilibration process necessary for forming a compound nucleus, leading to the breakup of the initial composite as a result of quasifission. As such, quasifission reactions hinder the formation of a superheavy element.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Quantum Molecular Charge-Transfer Model for Multistep Auger–Meitner Decay Cascade Dynamics

The fragmentation of molecular cations following inner-shell decay processes in molecules containing heavy elements underpins the X-ray damage effects observed in X-ray scattering measurements of biological and chemical materials, as well as in medical applications involving Auger electron-emitting radionuclides. Traditionally, these processes are modeled using simulations that describe the electronic structure at an atomic level, thereby omitting molecular bonding effects. This work addresses the gap by introducing a novel approach that couples Auger–Meitner decay to nuclear dynamics across multiple decay steps, by developing a decay spawning dynamics algorithm and applying it to potential energy surfaces characterized with ab initio molecular dynamics simulations. We showcase the approach on a model decay cascade following K-shell ionization of IBr and subsequent Kβ fluorescence decay. We examine two competing channels that undergo two decay steps, resulting in ion pairs with a total 3+ charge state. This approach provides a continuous description of the electron transfer dynamics occurring during the multistep decay cascade and molecular fragmentation, revealing the combined inner-shell decay and charge transfer time scale to be approximately 75 fs. In conclusion, our computed kinetic energies of ion fragments show good agreement with experimental data.

Ab initio molecular dynamics↗

DOE OSTI2025

Attosecond inner-shell lasing at ångström wavelengths

Since the invention of the laser, nonlinear effects such as filamentation, Rabi cycling and collective emission have been explored in the optical regime, leading to a wide range of scientific and industrial applications. X-ray free-electron lasers (XFELs) have extended many optical techniques to X-rays for their advantages of ångström-scale spatial resolution and elemental specificity. An example is XFEL-driven inner-shell Kα 1 (2p 3/2 → 1s 1/2 ) X-ray lasing in elements ranging from neon to copper, which has been used for nonlinear spectroscopy and development of new X-ray laser sources. Here, in this study, we show that strong lasing effects similar to those in the optical regime can occur at 1.5–2.1 Å wavelengths during high-intensity (>10 19 W cm −2 ) XFEL-driven Kα 1 lasing of copper and manganese. Depending on the temporal XFEL pump pulse substructure, the resulting X-ray pulses (about 10 6 −10 8 photons) can exhibit strong spatial inhomogeneities and spectral splitting, inhomogeneities and broadening. Three-dimensional Maxwell–Bloch calculations show that the observed spatial inhomogeneities result from X-ray filamentation and that the broad spectral features are driven by sub-femtosecond Rabi cycling. Our simulations indicate that these X-ray pulses can have pulse lengths of less than 100 attoseconds and coherence properties that provide opportunities for quantum X-ray optics applications.

47 OTHER INSTRUMENTATION↗

DOE OSTI2024

High-Fidelity and High-Performance Computational Simulations for Rapid Design Optimization of Sulfur Thermal Energy Storage

Industrial process heating (IPH) accounts for approximately 70% of US manufacturing energy use and is primarily produced by fossil fuel combustion. Approximately 1500 TWht (approximately 60%) of IPH demand is in the temperature range of 100-300. Industrial applications in this temperature range include drying, hydrothermal processing, thermal enhanced oil recovery, food and beverage, bioethanol production, etc. Cost-effective thermal energy storage (TES) that increases the utilization of waste and renewable heat (solar, geothermal, etc.) could provide significant energy savings and reliable heat sources, decrease emissions, and increase US manufacturing competitiveness through reductions in fuel consumption. TES development has historically been dominated by technologies suitable for deployment with concentrating solar power (CSP). State-of-the-art thermal storage deployed commercially with power tower CSP plants uses a 60%/40% NaNO3/KNO3 molten salt and operates between temperatures of approximately 280 degrees Celsius and 570 degrees Celsius using a two-tank configuration. However, these nitrate salts are unsuitable for operation outside of this temperature range due to a high freezing point of approximately 220 degrees Celsius, and limits on high-temperature salt stability and corrosion resistance of containment alloys. Other materials being investigated for TES include those based on: (1) sensible energy storage (various molten salt compositions, inert solid particles, rocks or pebble beds, sulfur, water, concrete, graphite, etc.), (2) latent energy storage in materials that undergo solid-liquid phase change at relevant temperatures (organic materials for low-temperature applications, inorganic salts and/or metals for high-temperature applications), or (3) thermochemical energy storage (hydrides, hydroxides, carbonates, metal oxides, etc.). The application temperature and challenges pertaining to storage material and/or containment cost, energy density, long-term thermal and cyclic stability, and charge/discharge heat transfer effectiveness drive material selection for a given IPH or electricity generation application. Sulfur is a cheap commodity at $80/ton compared to $1100 - 1300/ton for conventional salts. When using a metric of storage cost per kWh, sulfur costs around 2-3 $/kWh. Previous sulfur TES development focused on high temperature (>600 degrees) concentrated solar power applications with sulfur encapsulated in pipes and flow of gaseous HTF (air) in the shell side. However, for lower-temperature IPH applications in the range of approximately 100-300 degrees Celsius Element 16 adopted a compact and scalable TES design with molten sulfur in the shell and HTF pipes submerged in the molten sulfur bath. The low-cost molten sulfur TES for dispatchable IPH has deployment potential for broad applications. The spatial and temporal evolution of the HTF and sulfur temperature is critical to the TES system performance, and thus detailed modeling can improve understanding of the performance and facilitate design improvements. Using high performance computing and computational fluid dynamics (CFD) a low-cost molten sulfur thermal energy storage (TES) system for industrial process heating (IPH) applications was developed. The unique challenges in CFD modeling of sulfur TES are the sharp property changes of sulfur relevant to the working temperatures. Above 159, liquid sulfur undergoes polymerization, and the viscosity of sulfur rapidly increases by several orders of magnitude between 159 degrees Celsius and 188 degrees Celsius, followed by a decrease in viscosity beyond 188 degrees Celsius due to thermal bound dissociation. In addition, various concentrations of H2S impurities can also modify sulfur viscosity. This numerical challenge is especially relevant to transient simulation of the sulfur TES charging and discharging processes as the extreme property variations limit the applicability of traditional heat transfer correlations. Transient CFD simulations including the temperature-dependent sulfur properties and geometric complexity of the TES design were used to predict the effect of natural convection during charging and discharging on the heat transfer process, sulfur temperature uniformity, charge/discharge rates, and performance of the storage devices. The CFD model was validated with experimental results for a full charge and discharge cycle. The work will show 3D and 2D simulation comparisons aimed to facilitate rapid design iterations and a machine learning based design optimization approach.

CFD↗

DOE OSTI2025

Distinctive features of structural evolution and thermodynamic response in wide-bandgap semiconductors driven by intense electronic excitation

Radiation-tolerant material selection requires balancing lattice rigidity, defect dynamics, and electronic stability, as shown by covalent SiC outperforming ionic Ga 2 O 3 and GaN under extreme environments. Responding to intense electronic excitation, irradiation-driven phase segregation (β → δ/κ in Ga 2 O 3 ) and core–shell track (disordered structure in GaN), accompanied by elemental redistribution, contrastingly, exceptional radiation tolerance manifested by comparatively minimal lattice distortion (0.17 % strain variation) was demonstrated in SiC. These differential responses are primarily attributed to two fundamental mechanisms: (i) thermodynamic driving forces governing defect migration and phase separation, and (ii) the synergistic effects of robust covalent bonding composition coupled with efficient defect recombination processes. Here, the stronger electron–phonon (e-ph) coupling in Ga 2 O 3 (4.34 × 1018 W m −3 K −1 ) and GaN (3.55 × 10 18 W m −3 K −1 ) enhances lattice energy deposition, triggering thermal spikes (ΔT ≫ T m ) and structural transition behaviors, whereas weaker e-ph coupling in SiC (3.69 × 10 18 W m −3 K −1 ), relatively high thermodynamic parameters and efficient energy dissipation suppress thermal spikes to maintaining lattice integrity. The photoresponse degradation driven by enhanced radiative recombination is dominant in N-doped SiC, while V-doped systems achieve defect-mediated photoconduction optimization characterized by abrupt current transitions, matching fluorescence yield evolutions, and directly connecting defect engineering to optoelectronic performance.

Intense electronic excitation↗