Search NASA⌕ Search

SEARCH · Search NASA

Results for “shock deformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Quantifying the effect of late bombardment on terrestrial zircons

The first 500 million years of Earth history is thought to be a period of intense planetary bombardment, but the timing and flux of this meteorite bombardment is poorly understood. In particular, on the basis of an inferred lunar impact history, some workers have hypothesized a ~3.9 Ga terminal cataclysm (TC) in which there was marked increase in the impact flux affecting the Moon, the Earth and possibly other terrestrial planets. Minerals that survived this enigmatic period offer a way to test early planetary bombardment models as they may contain telltale micro- to nanoscale shock features. Here, we present results from a numerical modeling calculation that assesses the probability that a zircon residing in the crust would escape shock melting or shock deformation during a TC bombardment event. Even with conservative pressure estimates for zircon shock deformation and intermediate bombardment intensities, we find that only ~6% of ≥4.0 Ga crust would be expected to survive a 3.9 Ga cataclysm without experiencing either complete melting or zircon shock metamorphism. In this study, we couple this modeling with a search for shock effects in the oldest zircons from the Acasta Gneiss Complex, which would have been present in the Earth's crust during a putative 3.9 Ga TC. Spatially correlated electron and NanoSIMS ion microscopy of 4.02 Ga igneous zircons from Acasta reveals no evidence of ancient shock. These data, together with similar results from other Hadean zircon suites, confirm that a post-Hadean TC is unlikely to have occurred. We suggest that the dearth of pre-3.9 Ga terrestrial crust and zircons is instead best explained by endogenic processes related to the mechanisms of early crust formation. Our modeling allows us to evaluate bombardment scenarios from the terrestrial zircon record by applying probabilistic interpretations to zircon shock deformation data. This approach will be valuable for other planetary bodies, allowing broader conclusions to be drawn from geographically limited datasets.

58 GEOSCIENCES↗
DOE OSTI2021

Fingerprinting shock-induced deformations via diffraction

Abstract During the various stages of shock loading, many transient modes of deformation can activate and deactivate to affect the final state of a material. In order to fundamentally understand and optimize a shock response, researchers seek the ability to probe these modes in real-time and measure the microstructural evolutions with nanoscale resolution. Neither post-mortem analysis on recovered samples nor continuum-based methods during shock testing meet both requirements. High-speed diffraction offers a solution, but the interpretation of diffractograms suffers numerous debates and uncertainties. By atomistically simulating the shock, X-ray diffraction, and electron diffraction of three representative BCC and FCC metallic systems, we systematically isolated the characteristic fingerprints of salient deformation modes, such as dislocation slip (stacking faults), deformation twinning, and phase transformation as observed in experimental diffractograms. This study demonstrates how to use simulated diffractograms to connect the contributions from concurrent deformation modes to the evolutions of both 1D line profiles and 2D patterns for diffractograms from single crystals. Harnessing these fingerprints alongside information on local pressures and plasticity contributions facilitate the interpretation of shock experiments with cutting-edge resolution in both space and time.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Anisotropic Hot Spot Formation at a Grain Boundary in Shock-Compressed TATB High Explosive Crystal

Secondary high explosives (HEs) exhibit rich microstructure that promotes the formation of hot spots responsible for detonation initiation, but the role of microstructural interfaces remains poorly quantified. To this end, we develop extensions for the generalized crystal-cutting method (GCCM) to prepare molecular dynamics (MD) simulation cells containing grain boundaries (GBs) and other crystal–crystal interfaces with prescribed tilt and twist orientations. Using the GCCM, we perform MD simulations of shock interactions with a GB between the (001) and (100) crystal facets in the secondary HE TATB (1,3,5-triamino-2,4,6-trinitrobenzene). Our MD simulations reveal a strong directional dependence to the formation of a hot spot at the GB interface. In particular, transmission of the shock from the (001) grain to the (100) grain yields a hot spot in the (100) grain at the GB interface, whereas no hot spot is produced when an equivalent shock transits the GB in the opposite direction. We trace the origin of this GB anisotropy to three dominant factors: (1) the intrinsic differences in shock-deformation mechanisms and wave structures for the bulk (100) and (001) grains, which leads to distinct geometries and mechanical impedances upon shock arrival to the GB depending on which grains are donor or acceptor for the transmitted shock; (2) the different time intervals separating the initial shock rise and the formation of steady wave structures in the respective donor–acceptor configurations; and (3) the differences in time scales required to re-establish local thermal equilibrium. Interfacial hot spots form when these factors combine to impede development of a steady two-wave structure and instead induce a localized, pseudosingly shocked region that undergoes a higher rate of work production (resulting in a higher temperature) compared to when the steady two-wave structure develops further from the interface. The extensions to the GCCM approach presented here are anticipated to facilitate a wide range of MD studies that focus on understanding the role of crystal–crystal interfaces in molecular materials.

organic↗
DOE OSTI2021

Understanding the plasticity contributions during laser-shock loading and spall failure of Cu microstructures at the atomic scales

A hybrid atomic-scale and continuum modeling framework is used to study the microstructural evolution during the laser-induced shock deformation and failure (spallation) of copper microstructures. A continuum two-temperature model (TTM) is used to account for the interaction of Cu atoms with a laser in molecular dynamics (MD) simulations. The MD-TTM simulations study the effect of laser loading conditions (laser fluence) on the microstructure (defects) evolution during various stages of shock wave propagation, reflection, and interaction in single-crystal (sc) Cu systems. In addition, the role of the microstructure is investigated by comparing the defect evolution and spall response of sc-Cu and nanocrystalline (nc) Cu systems. The defect (stacking faults and twin faults) evolution behavior in the metal at various times is further characterized using virtual in situ selected area electron diffraction and x-ray diffraction during various stages of evolution of microstructure. Here, the simulations elucidate the uncertain relation between spall strength and strain-rate and the much stronger relation between the spall strength and the temperatures generated due to laser shock loading for the small Cu sample dimensions considered here.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Virtual texture analysis to investigate the deformation mechanisms in metal microstructures at the atomic scale

Understanding the deformation behavior of metallic materials at high strain rates requires the characterization of plasticity contributors such as twins, phase transformed regions, and dislocations. However, predicting the contributions from phase transformation and twinning relies on a complete understanding of the selection of variants for various loading orientations and the evolution of their volume fractions. This manuscript presents a new virtual texture (VirTex) analysis approach to characterize phase transformation and twinning variants in deformed microstructures generated using molecular dynamics (MD) simulations. Furthermore, the VirTex method involves the construction of a rotation matrix to calculate the angle/axis pairs and misorientation angles for each atom in the microstructure. Any changes in the orientation angle from angle/axis pairs and/or structure types are analyzed to determine the nucleation and evolution of variants in the microstructure. The study uses shock deformed single-crystal Fe, Ta, and Cu to analyze the variant selections for phase transformation or twinning or both in BCC and FCC systems. In addition, the VirTex analysis is able to characterize the phase transformation and twinning variants in nanocrystalline Fe and Ta microstructures. Besides characterizing variants, orientation mapping also provides an accelerated and on-the-fly approach for quantifying twin fractions in MD microstructures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A history of mild shocks experienced by the regolith particles on hydrated asteroid Ryugu

Micrometeorites, a possible major source of Earth’s water, are thought to form from explosive dispersal of hydrated chondritic materials during impact events on their parental asteroids. However, this provenance and formation mechanism have yet to be directly confirmed using asteroid returned samples. Here, we report evidence of mild shock metamorphism in the surface particles of asteroid Ryugu based on electron microscopy. All particles are dominated by phyllosilicates but lack dehydration textures, which are indicative of shock-heating temperatures below ~500°C. Microfault-like textures associated with extensively shock-deformed framboidal magnetites and a high-pressure polymorph of Fe–Cr–sulfide have been identified. These findings indicate that the average peak pressure was ~2 GPa. The vast majority of ejecta formed during impact on Ryugu-like asteroids would be hydrated materials, larger than a millimetre, originating far from the impact point. These characteristics are inconsistent with current micrometeorite production models, and consequently, a new formation mechanism is required.

58 GEOSCIENCES↗
DOE OSTI2021

Post-explosion Evolution of Core-collapse Supernovae

Here we investigate the post-explosion phase in core-collapse supernovae with 2D hydrodynamical simulations and a simple neutrino treatment. The latter allows us to perform 46 simulations and follow the evolution of the 32 explosion models during several seconds. We present a broad study based on three progenitors (11.2, 15, and 27 M ⊙ ), different neutrino heating efficiencies, and various rotation rates. We show that the first seconds after shock revival determine the final explosion energy, remnant mass, and properties of ejected matter. Our results suggest that a continued mass accretion increases the explosion energy even at late times. We link the late-time mass accretion to initial conditions such as rotation strength and shock deformation at explosion time. Only some of our simulations develop a neutrino-driven wind (NDW) that survives for several seconds. This indicates that NDWs are not a standard feature expected after every successful explosion. Even if our neutrino treatment is simple, we estimate the nucleosynthesis of the exploding models for the 15 M ⊙ progenitor after correcting the neutrino energies and luminosities to get a more realistic electron fraction.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Observations on the deformation of metal microspheres in shock-driven polymer flows

We report that solid particles can be fragmented by a fast-moving fluid if their velocity difference is great enough, such as during the atmospheric entry of meteoroids or the shock compression of engineered particulate composites. The extent of particle deformation and breakup in such systems is poorly understood because the necessary extreme conditions make observation difficult and data scarce. To meet this need, experiments combining ultrafast synchrotron-based radiography with plate impact loading were performed at the dynamic compression sector at the advanced photon source. Metal microspheres of several densities and strengths (Au, Ta, and W) were placed inside a polymer matrix. A planar shock wave was then produced in the polymer by the impact of a gun-launched flyer plate. X-ray images of the resulting flow were collected at ~150ns intervals. These images document the progression of particle deformation across a range of flow conditions and particle materials. They show that the extent of deformation is sensitive to the ratio of drag stress to particle strength. The deforming particle's shape is determined by the initial shock–particle interaction, fluid stagnation pressure, and vorticity, each acting on its own timescale. A set of scaling relationships is presented to capture these observations and enable comparison with prior hydrodynamic data. The result is a framework for predicting the conditions under which strong particles are severely deformed by a shock-driven flow.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Numerical investigation of laser-driven shock interaction with a deformable particle

A laser-driven shock propagating through an isolated particle embedded in a plastic (CH) target was studied using the radiation-hydrodynamic code FLASH. Preliminary simulations using IONMIX equations of state (EOS) showed significant differences in the shock Hugoniot of aluminum compared to experimental data in the low-pressure regime [O(10) GPa], resulting in higher streamwise compression and deformation of an aluminum particle. Hence, a simple modification to the ideal gas EOS was developed and employed to describe the target materials and examine the particle dynamics. The evolution of the pressure field demonstrated a complex wave interaction, resulting in a highly unsteady particle drag which featured two drag minima due to shock focusing at the rear end of the particle and rarefaction stretching due to laser shut-off. Although ~30% lateral expansion and ~25% streamwise compression were observed, the aluminum particle maintained considerable integrity without significant distortion. Additional simulations examined the particle response for a range of particle densities, sizes, and acoustic impedances. The data revealed that lighter particles such as aluminum gained significant momentum, reaching up to ~96% of the shocked CH's speed, compared to ~29% for the heavier tungsten particles. Despite the differences seen in the early stage of shock interaction, particles with varying acoustic impedances ultimately reached the same peak velocity. This identified particle-to-host density ratio is an important factor in determining the inviscid terminal velocity of the particle. In addition, the modified EOS model presented in this study could be used to approximate solid materials in hydrocodes that lack material strength models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

An Eulerian crystal plasticity framework for modeling large anisotropic deformations in energetic materials under shocks

Here, this paper demonstrates a novel Eulerian computational framework for modeling anisotropic elastoplastic deformations of organic crystalline energetic materials (EM) under shocks. While Eulerian formulations are advantageous for handling large deformations, constitutive laws in such formulations have been limited to isotropic elastoplastic models, which may not fully capture the shock response of crystalline EM. The present Eulerian framework for high-strain rates, large deformation material dynamics of EM incorporates anisotropic isochoric elasticity via a hypo-elastic constitutive law and visco-plastic single-crystal models. The calculations are validated against atomistic calculations and experimental data and benchmarked against Lagrangian (finite element) crystal plasticity computations for shock-propagation in a monoclinic organic crystal, octahydro-1,3,5,7-tetranitro-1,3,5,7 tetrazocine (β-HMX). The Cauchy stress components and the resolved shear stresses calculated using the present Eulerian approach are shown to be in good agreement with the Lagrangian computations for different crystal orientations. The Eulerian framework is then used for computations of shock-induced inert void collapse in β-HMX to study the effects of crystal orientations on hotspot formation under different loading intensities. The computations show that the hotspot temperature distributions and the collapse profiles are sensitive to the crystal orientations at lower impact velocities (viz., 500 m/s); when the impact velocity is increased to 1000 m/s, the collapse is predominantly hydrodynamic and the role of anisotropy is modest. The present methodology will be useful to simulate energy localization in shocked porous energetic material microstructures and other situations where large deformations of single and polycrystals govern the thermomechanical response.

42 ENGINEERING↗
DOE OSTI2024

A large deformation multiphase continuum mechanics model for shock loading of soft porous materials

A large deformation, coupled finite-element (FE) model is developed to simulate the multiphase response of soft porous materials subjected to high strain-rate loading. The approach is based on the theory of porous media (TPM) at large deformations. Simplifications to the one-dimensional regime studied in the numerical simulations follow. An overview of several different time integration schemes is presented for the purpose of solving the nonlinear dynamic coupled balance of momenta (mixture and fluid) and balance of mass of the mixture equations. Numerical examples are presented for (i) verification against closed-form analytical solutions assuming small loads, (ii) demonstrating large deformation effects at high strain-rate, and (iii) showing differences in deformations between a single-phase elastodynamics model with occluded compressible pore fluid and a multiphase poroelastodynamics model at high strain-rate. The multiphase model shows that the relative motion of the pore fluid significantly dampens the deformation response of the solid skeleton as compared to the single-phase model, and makes it possible to extract quantitative values for the stresses of the different constituents, thereby allowing one to form preliminary conclusions about the onset of damage in the solid skeleton. The novelty of the current work is developing a multiphase, large deformation, mixture theory numerical model for high strain-rate loading of soft porous materials. It was discovered that explicit, adaptive time-stepping Runge–Kutta schemes offer high accuracy at relatively low cost when compared to traditional implicit or explicit central difference time-stepping schemes for shock-like loadings. Here, shock viscosity is added to the mixture momentum balance equation to regularize the shock front, and a stabilization term is added to the mixture mass balance equation to stabilize equal order interpolation finite elements for the coupled finite element solution of multiphase materials.

Engineering↗
DOE OSTI2021

Geometry and dynamics of passive scalar structures in compressible turbulent mixing

We present a structure-based numerical analysis of passive scalar mixing in decaying homogeneous isotropic turbulence (DHIT) and shock-turbulence interaction canonical configurations. The analysis focuses on the temporal evolution of ensembles of passive scalar structures, initialized as spheres of different sizes relative to the Taylor microscale. An algorithm is introduced to track the evolution of each individual structure and the interactions with other structures in the ensemble, relating changes in the surface geometry and the underlying physical processes (turbulent transport, scalar dissipation, and shock compression). The tracking algorithm is applied to datasets from shock-capturing direct numerical simulations of DHIT, with Taylor microscale Reynolds number Re λ =40 and turbulence Mach number M t =0.2 ⁠, and STI cases in which the turbulence is processed by a shock wave at Mach numbers M = 1.5 and 3.0. Temporal surface convolution increases for initially larger structures, resulting in a higher probability of locally hyperbolic geometries where breakup into smaller structures occurs. Shock-induced deformation of the structures amplifies breakup processes, enhancing mixing, particularly for larger structures. Mixing enhancement by the shock is manifested as an amplification of the surface-averaged scalar gradient, which increases for initially larger structures. The alignment between the scalar gradient and the most extensional strain-rate eigendirection on the scalar isosurfaces also increases across the shock. Larger magnitudes of the scalar gradient and its alignment with the most compressive strain-rate eigendirection correlate with flatter surface regions. Shock-induced structure compression increases the area coverage of flat regions, where the amplification of scalar gradient is localized.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Inelastic deformation of diamond single crystals shock compressed to multimegabar stresses: Wave profile calculations

As the archetypal strong solid, the response of diamond shock compressed to multimegabar stresses is important for fundamental science and for numerical simulations of wave profiles for applications in high energy density physics experiments. Previous experiments and analysis have shown that the commonly used hydrodynamic assumption is invalid for diamond shock compressed to stresses below melt and an elastic–inelastic description is needed. Here, we present a phenomenological material model for calculating wave profiles in shock compressed diamond single crystals that incorporates this description. Also, to support the modeling effort, we carried out wave profile measurements on shock compressed diamond single crystals at the Sandia Z facility to augment previous measurements. Wave profiles for [100] and [111] diamond calculated using the material model provide a good match to the elastic–inelastic response (observed two-wave structure) measured at ∼325 and ∼360 GPa. Furthermore, the calculated peak stresses for single (overdriven) waves provide a good match to the measured Hugoniot states for stresses reaching ∼700 GPa, which is near melting conditions. The present results show that the diamond single crystal response at multimegabar shock stresses is characteristic of a brittle solid—pressure-dependent strength and strength loss due to inelastic deformation.

Deformation↗
DOE OSTI2022

Virtual diffraction simulations using the quasi-coarse-grained dynamics method to understand and interpret plasticity contributions during in situ shock experiments

The dynamic deformation response of metallic materials has contributions from dislocations, deformation twinning, and plastic deformation. The current state-of-art techniques can detail the complex mechanistic history of deformation modes under shock loading in real-time using in situ X-ray diffraction (XRD). However, the capability of these experiments to unravel plasticity contributions is challenging due to limitations in interpreting results and the lack of validation from atomistic simulations. Molecular dynamics (MD) simulations can successfully capture various deformation modes in metals and complement experiments using simulated diffractograms at various stages of evolution. However, the difference in length and time scales of MD simulations and experiments is a substantial obstacle in completing and interpreting in situ diffractograms. Therefore, the existing modeling methods require various approximations to model defect evolution and interaction at the mesoscales. However, while using approximations to correlate the peak broadening behavior to the density of dislocations or the shifts/splitting due to the presence of twins, the interpretations of the plasticity contributions from diffractograms are non-trivial, especially when multiple modes of deformation may be operating. This viewpoint discusses combining a mesoscale modeling method called quasi-coarse-grained dynamics and virtual XRD to characterize the plasticity contributions in BCC metals from slip, twinning, and phase transformation behavior. Furthermore, the combined approach shows promise in bridging the mesoscale gap between the capabilities of atomic-scale simulations and in situ experiments to characterize the dynamic deformation of materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Structure of Shock Waves and Inelasticity in Shock-Compressed Cemented Tungsten Carbides

In this study, shock wave experiments are conducted on General Carbide cemented tungsten carbide with 3.7wt.% cobalt binder to determine its shock-induced compression behavior up to 100 GPa. The measured wave profiles indicate the cemented tungsten carbide to undergo elastic-plastic deformation during shock compression. A three-stage particle velocity profile is observed in the experiments -- an initial elastic-rise to the Hugoniot Elastic Limit (HEL), an elastic-plastic ramp indicating substantial post-yield hardening, and finally a rise to the peak shocked Hugoniot state. The results of the experiments are used to determine the HEL, the shock velocity (U s ) vs. particle velocity (u p ) Hugoniot relation, and the longitudinal stress (σ x ) vs. specific volume (V) curve for the samples. The HEL of the material was determined to lie between 4.41 GPa and 4.58 GPa. The U s - u p relation was determined to be U s = 4.97 + 1. 457u p for particle velocities greater than 0.75 km/s. The measured plastic shock velocities for particle velocities less than 0.7 km/s were found to be larger than those predicted using the linear U s - u p Hugoniot relationship, indicating the cemented WC samples to preserve substantial shear strength in the post-yield deformation region. No phase transformation was observed up to 100 GPa.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Directional amorphization of covalently-bonded solids: A generalized deformation mechanism in extreme loading

Shock compression subjects materials to a unique regime of high quasi-hydrostatic pressure and coupled shear stresses for durations on the order of 1–10 nanoseconds for laser-driven loading of samples. There is, additionally, an attendant temperature increase due to the shock and the mechanisms of plastic deformation in metals whereby dislocations, twins, and phase transitions nucleate and propagate at velocities near the sound speed. Covalently bonded materials have, by virtue of the directionality of their bonds, great difficulty in responding by conventional plastic deformation to this extreme regime of shock compression. Here, we propose that the shear from shock compression induces amorphization, as observed in Si, Ge, B4C, SiC, and olivine ((Mg, Fe) 2 SO 4 ) and that this is a general deformation mechanism in a broad class of covalently bonded materials. The crystalline structure transforms to amorphous along regions of maximum shear stress, forming nanoscale bands, and thereby relaxing the shear component of the imposed shock stress. This process is usually preceded by the emission and propagation of a critical concentration of dislocations.

36 MATERIALS SCIENCE↗