Search NASA⌕ Search

SEARCH · Search NASA

Results for “shock polar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Supercritical flow about a thick circular-arc airfoil

The supercritical flow about a biconvex circular-arc airfoil is being thoroughly documented at Ames Research Center in order to provide experimental test cases suitable for guiding and evaluating current and future computer codes. The effects of angle of attack, effects of leading and trailing-edge splitter plates, additional unsteady pressure fluctuation (buffeting) measurements and glow-field shadowgraphs, and application of an oil-film technique to display separated-wake streamlines were studied. Computed and measured pressure distributions for steady and unsteady flows, using a recent computer code representative of current methodology, are compared. It was found that the numerical solutions are often fundamentally incorrect in that only strong (shock-polar terminology) shocks are captured, whereas experimentally, both strong and weak shock waves appear.

Mcdevitt, J. B.↗
NASA NTRS1977

Impact conditions required for formation of melt by jetting in silicates

It is demonstrated that the process of jetting which occurs when particles collide at oblique angles may produce melt at much lower velocities than are required for melt production in head-on collisions. The minimum velocities of impact required for jetting in aluminum, bronzitite, dunite, and quartz are calculated by the method of shock polars. The analysis, which depends on stated assumptions about attained pressures and the occurrence of jetting, uses shock-velocity particle-velocity equations of state with three shock regimes. The treatment indicates that jetting should arise in bronzitite, dunite, and quartz at relative velocities as low as 1-2 km/sec. At such velocities material which passes near the stagnation point in the jet-forming region is subjected to sufficiently high pressures so that it is probably melted.

Kieffer, S. W.↗
NASA NTRS1979

Some recent developments in the prediction of shock interaction phenomena at hypersonic speeds

The shock strengths for which either Edney type I or type II shock interference patterns can occur when two oblique shocks of opposite families intersect were determined graphically at Mach 10 by using logarithmic shock polar diagrams. The theoretical region of overlap for the two types of interaction was investigated by observing in the Schlieren system of the Langley 15-inch hypersonic flow apparatus the intersection of oblique shocks generated by two sharp 10 degree wedges as the wedge angles of attack and their relative positions were altered. A range of shock strengths for which either of the two interference patterns can exist was demonstrated.

Crawford, D. H.↗
NASA NTRS1952

Transonic flow past a wedge profile with detached bow wave

A theoretical study has been made of the aerodynamic characteristics at zero angle of attack of a thin, doubly symmetrical double-wedge profile in the range of supersonic flight speed in which the bow wave is detached. The analysis utilizes the equations of the transonic small-disturbance theory and involves no assumptions beyond those implicit in this theory. The mixed flow about the front half of the profile is calculated by relaxation solution of boundary conditions along the shock polar and sonic line. The purely subsonic flow about the rear of the profile is found by means of the method of characteristics specialized to the transonic small-disturbance theory. Complete calculations were made for four values of the transonic similarity parameter. These were found sufficient to bridge the gap between the previous results of Guderley and Yoshihara at a Mach number of 1 and the results which are readily obtained when the bow wave is attached and the flow is completely supersonic.

Vincenti, Walter G↗
NASA NTRS1947

Cones in Supersonic Flow

In the case of cones in axially symmetric flow of supersonic velocity, adiabatic compression takes place between shock wave and surface of the cone. Interpolation curves betwen shock polars and the surface are therefore necessary for the complete understanding of this type of flow. They are given in the present report by graphical-numerical integration of the differential equation for all cone angles and airspeeds.

Hantzsche, W.↗
NASA NTRS1993

HST imaging of hydrogen-poor ejecta in Abell 30 and Abell 78 - Wind-blown cometary structures

HST Faint Object Camera images of hydrogen-poor gas in the planetary nebulae A30 and A78 have revealed remarkable 'cometary' structures in the O III 5007-A forbidden line. Most of these cometary structures, consisting of compact (0.15-0.5 arcsec) knots with radial tails several arcsec in length, are located in an equatorial plane in both nebulae. In addition, two bright, compact (0.3 arcsec) polar knots are present in A30, one of them forming a bow shock. Corresponding polar features in A78 are more diffuse. The central stars of both nebulae have energetic winds which are most likely responsible for the 'cometary' knot morphology. We interpret this morphology in terms of dense (several thousand electrons per cu cm) H-poor condensations whose outer expanding layers are swept outward by stellar winds. Photoionization modeling indicates that while dense knot cores are mostly heated by atomic photoionization, expanding tenuous gas is heated by photoelectrons ejected from abundant dust grains. Our models predict steep temperature gradients for which there is observational evidence and possible abrupt phase transitions in the expanding gas.

Borkowski, Kazimierz J.↗
NASA NTRS1994

Potential flow downstream of the heliospheric terminal shock: A non-spherical shock

We have solved for the potential flow downstream of the terminal shock of the solar wind in the limit of small departures from a spherical shock due to a latitudinal ram pressure variation in the supersonic solar wind. The solution connects anisotropic streamlines at the shock to uniform streamlines down the heliotail because we use a non-slip boundary condition on the heliopause at large radii. The rotational velocity about the heliotail in the near-field solution decays as the fourth power of distance from the shock. The polar divergence of the streamlines will have consequences for the previously discussed magnetic pressure ridge that may build-up just inside the heliopause.

Nerney, Steven↗
NASA NTRS1995

Potential Flow Downstream of the Heliospheric Terminal Shock: A Non-Spherical Shock

We have solved for the potential flow downstream of the terminal shock of the solar wind in the limit of small departures from a spherical shock due to a latitudinal ram pressure variation in the supersonic solar wind. The solution connects anisotropic streamlines at the shock to uniform streamlines down the heliotail because we use a non-slip boundary condition on the heliopause at large radii. The rotational velocity about the heliotail in the near-field solution decays as the fourth power of distance from the shock. The polar divergence of the streamlines will have consequences for the previously discussed magnetic pressure ridge that may build-up just inside the heliopause.

Nerney, Steven↗
NASA NTRS1991

Molecular hydrogen polarization images of OMC-1

An image of the polarization of the shocked H2 v = 1-0 S(1) line emission in the core of OMC-1 has been obtained. Along the molecular outflow of the source, the line is dichroically polarized by a medium of aligned grains located between the earth and the shock fronts. The polarization pattern traces the magnetic field direction, which is parallel to the outflow axis and to the large-scale field direction determined from far-IR continuum measurements. Close to the IR source IRc2, the likely source of the outflow, the aligned vectors twist, indicating that the magnetic field direction changes. Modeling the line ratios of scattered H2 lines in the reflection nebula, it is concluded that the size distribution of grains there is typical of the small grains in the diffuse interstellar medium. By contrast, the scattered continuum radiation from the core region suggests that the grains there are larger than this.

Burton, Michael G.↗
NASA NTRS1988

Accretion shock geometries in the magnetic variables

The first self consistent shock models for the AM Herculis-type systems successfully identified the dominant physical processes and their signatures. These homogenous shock models predict unpolarized, Rayleigh-Jeans optical spectra with sharp cutoffs and rising polarizations as the shocks become optically thin in the ultraviolet. However, the observed energy distributions are generally flat with intermediate polarizations over a broad optical band. These and other observational evidence support a non-homogenous accretion profile which may extend over a considerable fraction of the stellar surface. Both the fundamental assumptions underlying the canonical 1-D shock model and the extension of this model to inhomogenous accretion shocks were identified, for both radial and linear structures. The observational evidence was also examined for tall shocks and little evidence was found for relative shock heights in excess of h/R(1) greater than or equal to 0.1. For several systems, upper limits to the shock height can be obtained from either x ray or optical data. These lie in the region h/R(1) is approximately 0.01 and are in general agreement with the current physical picture for these systems. The quasi-periodic optical variations observed in several magnetic variables may eventually prove to be a major aid in further understanding their accretion shock geometries.

Stockman, H. S.↗
NASA NTRS1999

Substorm Pseudobreakups Associated with Interplanetary Shocks/Pressure Pulses: Wind and Polar

Ten interplanetary WIND shock/ pressure pulse events are used to study the magnetospheric delay of pseudobreakup (PB) or substorm onsets. We identify the PBs and substorms by using the POLAR UV imaging data. The states of the interplanetary medium and the conditions of the ionosphere before and after the auroral brightening onsets are studied. We find that the magnetospheric delay time strongly constrains the location of the nightside X-line during such events. We also find for PB (or no activity) events, that the interplanetary and ionosphere preconditions are unusually low.

Zhou, X.-Y.↗
NASA NTRS1975

Bow shock and magnetosheath waves at Mercury

Mariner 10 measurements at the Mercury bow shock provide examples where the magnetic field is approximately parallel or perpendicular to the bow shock normal. Upstream of a broad irregular parallel shock, left hand circularly polarized waves are observed which cut off very sharply at approximately 4 Hz. Upstream of a perpendicular shock, right hand circularly polarized waves are observed which persist up to the Nyquist frequency of 12 Ha. Determination of the wave propagation vector as a function of frequency helps conclusively identify the waves as whistler mode waves propagating from the shock. The magnetosheath downstream of the parallel shock is disturbed more than that downstream of the perpendicular shock particularly below 1 Hz. In the latter case regular left hand polarized waves observed slightly above the proton gyrofrequency are identified as ion cyclotron waves with wavelength approximately 300 km which are Doppler shifted up to their observed frequency.

Fairfield, D. H.↗
NASA NTRS1995

Motion of the Heliospheric Termination Shock at High Heliographic Latitude

We expect the mean distance of the heliospheric termination shock to be greater (smaller) at polar latitudes than at equatorial latitudes, depending on whether the mean dynamic pressure of the solar wind is greater or smaller at high latitudes. The heliospheric termination shock is expected to move in response to variation in upstream solar wind conditions, so that at any particular instant the termination shock will resemble a distorted asymmetric balloon with some parts moving inward and others moving outward. If the shock is a gasdynamic or magnetohydrodynamic shock the results of the analysis depend only very weakly on the nature of the upstream disturbance; typical speeds of the disturbed shock are approximately 100 to 200 km/s. In the absence of a significant latitude gradient of the typical magnitude of solar wind disturbances typical motions of the disturbed shock at polar latitudes would be about twice as fast, due to the higher speed of the high-latitude wind. If the dynamics of the termination shock are dominated by acceleration of the anomalous component of the cosmic rays, the motion of the shock in response to a given disturbance is substantially slower than in the gasdynamic case. Conceivably, particle acceleration might be a less important effect at higher latitudes, and we envision the possibility of a termination shock that is dominated by particle acceleration at lower latitudes and is an MHD shock at high latitudes. In this event high latitude solar wind disturbances would produce substantially larger inward and outward motions of the shock in the polar regions.

Barnes, Aaron↗