Search NASA⌕ Search

SEARCH · Search NASA

Results for “silicon electrodes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Stress Evolution in Composite Silicon Electrodes during Lithiation/Delithiation

We report real-time average stress measurements on composite silicon electrodes made with two different binders – viz. Carboxymethyl cellulose (CMC) and Polyvinylidene fluoride (PVDF) – during electrochemical lithiation and delithiation. During galvanostatic lithiation at very slow rates, the stress in a CMC-based electrode becomes compressive and increases to 70 MPa, where it reaches a plateau and increases slowly thereafter with capacity. The PVDF-based electrode exhibits similar behavior, although with lower peak compressive stress of about 12 MPa. These initial experiments indicate that the stress evolution in a Si composite electrode depends strongly on the mechanical properties of the binder. Stress data obtained from a series of lithiation/delithiation cycles suggests plasticity induced irreversible shape changes in contacting Si particles, and as a result, the stress response of the system during any given lithiation/delithiation cycle depends on the cycling history of the electrode. While these results constitute the first in situ stress measurements on composite Si electrodes during electrochemical cycling, the diagnostic technique described herein can be used to assess the mechanical response of a composite electrode made with other active material/binder combinations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High tensile alloy of copper to mitigate current collector deformation in silicon electrodes for lithium-ion batteries

The volumetric changes of silicon electrodes, along with the strong adhesive properties of certain binders, can lead to plastic deformation of the current collector and create damage in the electrode coating. Here, in this study, we report a detailed study of silicon coatings on a high-tensile alloy (HTA) foil of copper with strength over twice that of conventional copper foils. The HTA current collectors with high mechanical strength can mitigate plastic deformation upon continuous cycling. At moderate areal capacities (2.5–3 mAh cm −2 ), conventional copper foils show significant wrinkling after only a few electrochemical cycles, whereas the HTA foils remain intact. We demonstrate viability of the HTA foils in large format xx6395 pouch cells, in which the HTA current collectors remain intact even at an areal capacity of 4.5 mAh cm −2 ; in contrast, wrinkles form in conventional copper current collectors increasing the likelihood of lithium plating. Computational studies show that stresses generated during cycling of silicon electrodes are very high in the current collector and at the current collector-coating interface, explaining the wrinkling of conventional Cu foils. Our studies highlight importance of current collector to solve the electrochemical and chemo-mechanical performance challenges associated with high-loading silicon electrodes.

Chemo-mechanical degradation↗

Communication—Effect of Lower Cutoff Voltage on the 1 st Cycle Performance of Silicon Electrodes

Here, silicon electrodes were cycled once to determine the effect of lower cutoff voltage (LCV) on the irreversible capacity and Li 15 Si 4 phase presence for a protocol that incorporated a potentiostatic hold at the LCV. Cells lithiated below 90 mV showed indications of the crystalline Li 15 Si 4 peak, which was absent for cells with lower cutoff voltages above 90 mV. Irreversible capacity loss was independent of the LCV used. While higher LCVs led to lower capacities, this capacity could be recovered with longer potentiostatic holds. Lastly, these longer holds did not lead to Li 15 Si 4 formation.

36 MATERIALS SCIENCE↗

Mitigating mechanical failure of crystalline silicon electrodes for lithium batteries by morphological design [Morphological design of silicon electrode with anisotropic interface reaction rate for lithium ion batteries]

Although crystalline silicon (c-Si) anodes promise very high energy densities in Li-ion batteries, their practical use is complicated by amorphization, large volume expansion and severe plastic deformation upon lithium insertion. Recent experiments have revealed the existence of a sharp interface between crystalline Si (c-Si) and the amorphous Li x Si alloy during lithiation, which propagates with a velocity that is orientation dependent; the resulting anisotropic swelling generates substantial strain concentrations that initiate cracks even in nanostructured Si. Here we describe a novel strategy to mitigate lithiation-induced fracture by using pristine c-Si structures with engineered anisometric morphologies that are deliberately designed to counteract the anisotropy in the crystalline/amorphous interface velocity. This produces a much more uniform volume expansion, significantly reducing strain concentration. Based on a new, validated methodology that improves previous models of anisotropic swelling of c-Si, we propose optimal morphological designs for c-Si pillars and particles. The advantages of the new morphologies are clearly demonstrated by mesoscale simulations and verified by experiments on engineered c-Si micropillars. The results of this study illustrate that morphological design is effective in improving the fracture resistance of micron-sized Si electrodes, which will facilitate their practical application in next-generation Li-ion batteries. In conclusion, the model and design approach present in this paper also have general implications for the study and mitigation of mechanical failure of electrode materials that undergo large anisotropic volume change upon ion insertion and extraction.

25 ENERGY STORAGE↗

Solvents and slurries comprising a poly(carboxylic acid) binder for silicon electrode manufacture

An silicon-containing electrode is formed by coating a silicon-containing slurry onto a conductive current collector. The slurry comprises a binder solution comprising a poly(carboxylic acid) binder dissolved in a mixed solvent system comprising an amide solvent of Formula I, as described herein, and a second solvent which can be water and/or an organic solvent. The binder preferably comprises poly(acrylic acid). The mixed solvent system comprises about 10 to about 99 vol % of the amide solvent of Formula I. The binder solution is utilized as a solvent for a slurry of silicon-containing particles for preparing the silicon-containing electrode. The slurries comprising the mixed solvent system have higher viscosity and are more stable than slurries containing the same concentrations of silicon particles, carbon particles, and binder in water as the sole solvent.

Zhang, Lu↗

Casein from Bovine Milk as a Binder for Silicon Based Electrodes

Silicon is a promising anode material for lithium ion batteries due to the high theoretical capacity (∼3600mAh/g). However, silicon-based electrodes face rapid degradation due to the extensive volume variation (∼300%) during the lithiation/delithiation process. Binders used in the electrode fabrication play a crucial role for silicon electrodes since it can reduce the mechanical fracture during the cycling process. Recent investigations suggest that in addition to the importance of the mechanical properties of the binder, the chemical reactions between the binder and the surface of the silicon particles also contribute to stabilization. Further investigations suggest that functionalized small molecules can also modify the surface of silicon particles and stabilize cycling. An inexpensive, environmentally friendly alternative has been investigated as a binder for silicon electrodes. Casein is a milk protein found in bovine milk rich in amine groups and carboxylic acid groups which can form bonds with the silanol groups in silicon. A comparative study conducted between PVDF and Casein as binders have shown that when casein was used as binder, it shows better performance compared to PVDF. Surface morphology and solid electrolyte interphase (SEI) was analyzed using electron microscopy techniques and spectroscopic methods and the results will be discussed.

36 MATERIALS SCIENCE↗

The Chemistry of Electrolyte Reduction on Silicon Electrodes Revealed by in Situ ATR-FTIR Spectroscopy

While silicon is the most promising next-generation anode material for lithium-ion batteries (LIBs), silicon electrodes exhibit significant capacity fade with cycling. A common hypothesis is that the capacity loss is due to the solid electrolyte interphase (SEI) forming in the first cycle and becoming destabilized by large cyclic volume changes. A cell for in situ attenuated total reflection-Fourier transform infrared spectroscopy with controllable penetration depth was used to study the chemistry at the electrode–electrolyte interface. The SEI product precursors at the interface were successfully identified and differentiated from free or solvated solvent molecules in the bulk electrolyte. Intriguingly, for the most common electrolyte consisting of ethylene carbonate and diethyl carbonate, ethylene carbonate was found to directly reduce to lithium ethylene dicarbonate on the lithiated silicon surface and diethyl carbonate to selectively reduce to diethyl 2,5-dioxahexane dicarboxylate on the surface of the native silicon-oxide film. In conclusion, understanding this surface dependence of the SEI composition is critical to tuning the silicon electrode surface condition and, ultimately, enhancing the performance of future LIBs.

25 ENERGY STORAGE↗

Thermal Decomposition of the Solid Electrolyte Interphase (SEI) on Silicon Electrodes for Lithium Ion Batteries

Here, thermal behavior of the solid electrolyte interphase (SEI) on a silicon electrode for lithium ion batteries has been investigated by TGA. In order to provide a better understanding of the thermal decomposition of the SEI on silicon, the thermal decomposition behavior of independently synthesized lithium ethylene dicarbonate (LEDC) was investigated as a model SEI. The model SEI (LEDC) has three stages of thermal decomposition. Over the temperature range of 50–300 °C, LEDC decomposes to evolve CO 2 and C 2 H 4 gases leaving lithium propionate (CH 3 CH 2 CO 2 Li) and Li 2 CO 3 as solid residues. The lithium propionate decomposes over the temperature range of 300–600 °C to evolve pentanone leaving Li 2 CO 3 as a residual solid. Finally, the Li 2 CO 3 decomposes over 600 °C to evolve CO 2 leaving Li 2 O as a residual solid. A very similar thermal decomposition process is observed for the SEI generated on cycled silicon electrodes. However, two additional thermal decomposition reactions were observed characteristic of Li x PO y F z at 300 °C and the polyimide binder at 550 °C. TGA measurements of Si electrodes after various numbers of cycles suggest that the LEDC on Si electrodes thermally decomposes during cycling to form lithium propionate and Li 2 CO 3 , resulting in increased complexity of the SEI.

36 MATERIALS SCIENCE↗

Stress and Strain in Silicon Electrode Models

While the high capacity of silicon makes it an attractive negative electrode for Li-ion batteries, the associated large volume change results in fracture and capacity fade. Composite electrodes incorporating silicon have additional complexity, as active material is attached to surrounding material which must likewise experience significant volume change. In this paper, a finite-deformation model is used to explore, for the first time, mechanical interactions between a silicon particle undergoing lithium insertion, and attached binder material. Simulations employ an axisymmetric model system in which solutions vary in two spatial directions and shear stresses develop at interfaces between materials. The mechanical response of the amorphous active material is dependent on lithium concentration, and an equation of state incorporating reported volume expansion data is used. Simulations explore the influence of active material size and binder stiffness, and suggest delamination as an additional mode of material damage. Computed strain energies and von Mises equivalent stresses are in physically-relevant ranges, comparable to reported yield stresses and adhesion energies, and predicted trends are largely consistent with reported experimental results. It is hoped that insights from this work will support the design of more robust silicon composite electrodes.

36 MATERIALS SCIENCE↗

Electrolyte compositions for stabilizing silicon electrodes in lithium batteries

A lithium-ion electrochemical cell comprises a first electrode, a second electrode comprising elemental silicon, a microporous separator membrane between the first and second electrodes, and an electrolyte in contact with the electrodes and the membrane. The electrolyte comprises a lithium salt at a concentration in the range of about 0.1 M to about 5 M, and an additional metal salt at a concentration in the range of about 0.001 to about 5 M dissolved in an organic solvent. The additional metal salt comprises a metal cation that can form a lithium-silicon-metal Zintl phase; and the first electrode comprises metallic lithium or a cathode active material capable of donating and accepting lithium ions to and from the second electrode during electrochemical cycling. Electrolytes for use with silicon-containing electrodes also are described.

Vaughey, John T.↗

Interfacial Reactivity of Silicon Electrodes: Impact of Electrolyte Solvent and Presence of Conductive Carbon

Silicon (Si) is a promising high-capacity material for lithium-ion batteries; however, its limited reversibility hinders commercial adoption. Approaches such as particle and crystallite size reduction, introduction of conductive carbon, and use of different electrolyte solvents have been explored to overcome these electrochemical limitations. Herein, operando isothermal microcalorimetry (IMC) is used to probe the influence of silicon particle size, electrode composition, and electrolyte additives fluoroethylene carbonate and vinylene carbonate on the heat flow during silicon lithiation. In this work, the IMC data are complemented by X-ray photoelectron and Raman spectroscopies to elucidate differences in solid electrolyte interphase (SEI) composition. Nanosized (~50 nm, n-Si) and micrometer-sized (~4 μm, μ-Si) silicon electrodes are formulated with and without amorphous carbon and electrochemically lithiated in ethylene carbonate (EC), fluoroethylene carbonate (FEC), or vinylene carbonate (VC) based electrolytes. Notably, n-Si electrodes generate 53–61% more normalized heat relative to their μ-Si counterparts, consistent with increased surface area and electrode/electrolyte reactivity. Introduction of amorphous carbon significantly alters the heat flow profile where multiple exothermic peaks and increased normalized heat dissipation are observed for all electrolyte types. Notably, the VC-containing electrolyte demonstrates the greatest normalized heat dissipation of the electrode compositions tested showing as much as a 50% increase compared to the EC or FEC counterparts. The results are relevant to the understanding of silicon negative electrode function in the presence of electrolyte additives and provide insight relative to silicon containing cell reactivity and safety.

25 ENERGY STORAGE↗

Failure mechanisms of single-crystal silicon electrodes in lithium-ion batteries

Long-term durability is a major obstacle limiting the widespread use of lithium-ion batteries in heavy-duty applications and others demanding extended lifetime. As one of the root causes of the degradation of battery performance, the electrode failure mechanisms are still unknown. In this paper, we reveal the fundamental fracture mechanisms of single-crystal silicon electrodes over extended lithiation/delithiation cycles, using electrochemical testing, microstructure characterization, fracture mechanics and finite element analysis. Anisotropic lithium invasion causes crack initiation perpendicular to the electrode surface, followed by growth through the electrode thickness. The low fracture energy of the lithiated/unlithiated silicon interface provides a weak microstructural path for crack deflection, accounting for the crack patterns and delamination observed after repeated cycling. On the basis of this physical understanding, we demonstrate how electrolyte additives can heal electrode cracks and provide strategies to enhance the fracture resistance in future lithium-ion batteries from surface chemical, electrochemical and material science perspectives.

25 ENERGY STORAGE↗