Search NASA⌕ Search

SEARCH · Search NASA

Results for “silver nanoparticle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Long-term Accumulation, Depth Distribution, and Speciation of Silver Nanoparticles in Biosolids-Amended Soils

Biosolids, when applied to soil, can be a source of metals and metal nanoparticles. One of the metals that forms nanoparticles is silver (Ag), which is commonly used in elemental (Ag(0)) form as an engineered nanomaterial in industrial or consumer products. The objective of this study was to quantify and characterize the accumulation and transport of Ag in a natural soil that has received agronomically-recommended rates of biosolids as fertilizer for the past 23 years (1994{2017). Total Ag concentrations were measured in biosolids and soil samples collected from 0 to 10 cm between 1996 and 2017. In addition, the depth distribution of Ag in the soil down to 60-cm depth was measured in 2017. Electron microscopy, in combination with X-ray spectroscopy, and X-ray absorption spectroscopy were used to identify the elemental association and oxidation state of the Ag in the samples. The Ag concentrations in the biosolids-amended soil increased steadily from 1996 until 2007, after which the concentrations leveled off at about 1.25 mg Ag kg-1 soil. This corresponded with a decrease of Ag concentrations in the biosolids over time. The majority of the Ag (82%) was confined to the top 10 cm of the soil, small amounts (14%) were detected in 10 to 20-cm depth, and trace amounts (4%) in 30 to 40-cm depth. The Ag in the biosolids and soil was identified as Ag-containing nanoparticles with a diameter of 10 to 12 nm. Ag was associated with S suggest that these 19 nanoparticles are Ag2S. This could be corroborated in biosolids with X-ray absorption spectroscopy (XANES); however, the Ag concentrations in the soil samples were too low to allow identification with XANES. Biosolids, when applied at agronomic rates in dryland cropping systems, represent an economically viable source of crop nutrients. In our study, long-term application of biosolids did not increase the concentration of total Ag in soil above a maximum of 1.5 mg Ag kg-1, and the Ag is present in the sulfide form. This concentration is below ecotoxicity limits for Ag2S in soil.

Taylor, Stephen E.↗
DOE OSTI2020

Polydopamine Surface Coating Synergizes the Antimicrobial Activity of Silver Nanoparticles

Metal nanoparticles, especially silver nanoparticles (AgNPs), have drawn increasing attention for antimicrobial applications. Most studies have emphasized on the correlations between the antibacterial potency of AgNPs and the kinetics of metallic to ionic Ag conversion, while other antimicrobial mechanisms have been underestimated. In this work, we focused on the surface effects of polydopamine (PDA) coating on the antimicrobial activity of AgNPs. A method of fast deposition of PDA was used to synthesize the PDA-AgNPs with controllable coating thickness ranging from 3 to 25 nm. The antimicrobial activities of the PDA-AgNPs were analyzed by fluorescence-based growth curve assays on Escherichia coli. The results indicated that the PDA-AgNPs exhibited significantly higher antibacterial activities than poly(vinylpyrrolidone)-passivated AgNPs (PVP-AgNPs) and PDA themselves. It was found that the PDA coating synergized with the AgNPs to prominently enhance the potency of the PDA-AgNPs against bacteria. Additionally, the analysis of X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy elucidated that the synergistic effects could be originated from the interaction/coordination between Ag and catechol group on the PDA coating. The synergistic effects led to increased generation of reactive oxygen species and the consequent bacterial damage. Overall, these findings demonstrated the importance of the surface effects on the antimicrobial properties of AgNPs. The underlying molecular mechanisms have shined light on the future development of more potent metal nanoparticle-based antimicrobial agents.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Detection of large extracellular silver nanoparticle rings observed during mitosis using darkfield microscopy

During studies on the absorption and interactions between silver nanoparticles and mammalian cells grown in vitro it was observed that large extracellular rings of silver nanoparticles were deposited on the microscope slide, many located near post-mitotic cells. Silver nanoparticles (AgNP, 80nm), coated with citrate, were incubated at concentrations of 0.3 to 30 μg/ml with a human-derived culture of retinal pigment epithelial cells (ARPE-19) and observed using darkfield and fluorescent microscopy, 24 h after treatment. Approximately cell-sized extracellular rings of deposited AgNP were observed on the slides among a field of dispersed individual AgNP. The mean diameter of 45 nanoparticles circles was 62.5 +/-12 microns. Ring structures were frequently observed near what appeared to be post-mitotic daughter cells, giving rise to the possibility that cell membrane fragments were deposited on the slide during mitosis, and those fragments selectively attracted and retained silver nanoparticles from suspension in the cell culture medium. These circular structures were observable for the following technical reasons: 1) darkfield microscope could observe single nanoparticles below 100 nm in size, 2) a large concentration (10 8 and 10 9 ) of nanoparticles was used in these experiments 3) negatively charged nanoparticles were attracted to adhesion membrane proteins remaining on the slide from mitosis. The observation of silver nanoparticles attracted to apparent remnants of cellular mitosis could be a useful tool for the study of normal and abnormal mitosis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Silver Nanoparticles Functionalized Nanosilica Grown over Graphene Oxide for Enhancing Antibacterial Effect

The continuous growth of multidrug-resistant bacteria due to the overuse of antibiotics and antibacterial agents poses a threat to human health. Silver nanoparticles, silica-based materials, and graphene-based materials have become potential antibacterial candidates. In this study, we developed an effective method of enhancing the antibacterial property of graphene oxide (GO) by growing nanosilica (NS) of approximately 50 nm on the graphene oxide (GO) surface. The structures and compositions of the materials were characterized through powdered X-ray diffraction (P-XRD), transmission electron microscopy (TEM), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDS), ultraviolet–visible spectroscopy (UV–VIS), dynamic light scattering (DLS), Raman spectroscopy (RM), Fourier-transform infrared spectroscopy (FTIR), Brunauer–Emmet–Teller (BET) surface area, and pore size determination. The silver nanoparticles (AgNPs) with an average diameter of 26 nm were functionalized on the nanosilica (NS) surface. The composite contained approximately 3% of silver nanoparticles. The silver nanoparticles on nanosilica supported over graphene oxide (GO/NS/AgNPs) exhibited a 7-log reduction of Escherichia coli and a 5.2-log reduction of Bacillus subtilis within one hour of exposure. Both GO/NS and GO/NS/AgNPs exhibited substantial antimicrobial effects against E. coli and B. subtilis.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Lamellar and Hexagonal Assemblies of PEG-Grafted Silver Nanoparticles: Implications for Plasmonics and Photonics

Assembly of silver nanoparticles (AgNPs) grafted with thiolated poly(ethylene glycol) (PEG-SH) with various molecular weights is reported. Synchrotron-based X-ray surface-sensitive diffraction methods are used to determine the nature of two-dimensional (2D) assemblies at liquid/vapor interfaces, and small-angle X-ray scattering (SAXS) is used to monitor the three-dimensional (3D) assemblies in bulk suspensions. We find that assembly can be induced either by the addition of K 2 CO 3 or polyacrylic acid (PAA) to the PEG-AgNP aqueous suspensions. The addition of K 2 CO 3 induces a 2D hexagonal structure at the liquid/vapor interface and a 3D hexagonal columnar structure in solutions, where the columns consist of tethered PEG-AgNP chains. On the other hand, the addition of PAA leads to the formation of a 2D lamella-like distorted hexagonal sheet at the liquid/vapor interface and a 3D lamellar superstructure formed by stacked 2D sheets in the PEG-AgNP suspension. Effects of the core type of nanoparticles on the assembly can be used to control structures for potential applications in plasmonics and photonics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Investigating Silver Nanoparticle Interactions with Quaternary Ammonium Functionalized Triblock Copolymers and Their Effect on Midblock Crystallinity

Interactions between silver nanoparticles and a cationic triblock copolymer significantly alter bulk material properties and can be tuned by functionalizing the polymer with different quaternary ammonium cations (QACs). In this work, poly-chloromethylstyrene-b-polycyclooctene-b-polychloromethylstyrene (PCMS-b-PCOE-b-PCMS) was quaternized with either methylpiperidinium (MPRD) or trimethylammonium (TMA). The surface interacting groups were identified using FT-IR to be the phenyl rings, the QACs from the outer blocks, and vinyl groups from the PCOE midblock. Changes in thermal characteristics and crystallinity were highly dependent on the QAC, uncovering differences in the nature of the interactions between silver and TMA or MPRD. Interactions induced by TMA greatly hinder crystalline domain formation and give rise to a higher water content, while MPRD promotes certain crystalline orientations and provides a greater degree of crystallinity with a lower water content. In this work, our findings demonstrate that bulk polymer characteristics can be tuned, a highly desirable attribute for many nanocomposite materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Size-tunable silver nanoparticle synthesis in glycerol driven by a low-pressure nonthermal plasma

Silver nanoparticles (NPs) are extensively used in electronic components, chemical sensors, and disinfection applications, in which many of their properties depend on particle size. However, control over silver NP size and morphology still remains a challenge for many synthesis techniques. Here, in this work, we demonstrate the surfactant-free synthesis of silver NPs using a low-pressure inductively coupled nonthermal argon plasma. Continuously forming droplets of silver nitrate (AgNO 3 ) precursor dissolved in glycerol are exposed to the plasma, with the droplet residence time being determined by the precursor flow rate. Glycerol has rarely been studied in plasma-liquid interactions but shows favorable properties for controlled NP synthesis at low pressure. We show that the droplet residence time and plasma power have strong influence on NP properties, and that improved size control and particle monodispersity can be achieved by pulsed power operation. Silver NPs had mean diameters of 20 nm with geometric standard deviations of 1.6 under continuous wave operation, which decreased to 6 nm mean and 1.3 geometric standard deviation for pulsed power operation at 100 Hz and 20% duty cycle. We propose that solvated electrons from the plasma and vacuum ultraviolet (VUV) radiation induced electrons produced in glycerol are the main reducing agents of Ag + , the precursor for NPs, while no significant change of chemical composition of the glycerol solvent was detected.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Selective Plasmon-Induced Oxidation of 4-Aminothiophenol on Silver Nanoparticles

Selectivity in plasmonic chemistry is typically achieved using bimetallic nanostructures. Herein, we show that monometallic silver nanoparticles can also drive highly selective interfacial transformations, oxidation reactions particularly. This is illustrated through a close inspection of tip-enhanced Raman spectral images of 4-aminothiophenol (ATP)-functionalized Au vs Ag nanoparticles. Further, we find that whereas the thoroughly described dimerization reaction to form 4,4’-dimercaptoazobenzene dominates the response on Au, highly selective oxidation on Ag nanoparticles exclusively leads to 4-nitrothiophenol. We explore the origin of the distinct reaction pathways on Ag vs Au nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Plasmon-induced excitation energy transfer in silver nanoparticle dimers: A real-time TDDFTB investigation

Here, using real-time quantum dynamics calculations, we perform theoretical investigations of light-induced interactions and electronic excitation transfer in a silver nanoparticle dimer. Real-time time-dependent density functional tight-binding (RT-TDDFTB) calculations provide details of the quantum dynamical processes at an electronic/atomistic level with attosecond resolution. The computational efficiency of RT-TDDFTB allows us to examine electronic dynamics up to picosecond time scales. With time scales varying over six orders of magnitude, we provide insight into interactions between the nanoparticle and laser and between nanoparticles. Our results show that the coupling between nanoparticle monomers is dependent on the separation distance between the nanoparticles in the dimer. As the interparticle distance is varied, the dipole–dipole interactions and electronic excitation transfer mechanisms are markedly different. At large distances (from 50 to 20 Å), the energy transfer from NP1 to NP2 becomes more efficient as the interparticle distance decreases. The total dipole moment of the Ag 14 nanoparticle dimer increases linearly at an interparticle distance of 20 Å and reaches its maximum after 1.2 ps. The electronic excitation transfer is also the most efficient at 20 Å. At short distances, back-transfer effects reduce the ability of the dimer and NP1 to accept energy from the incident electric field. We attribute the distance-dependent features of the nanoparticle dimer to the beating between the laser acting on NP1 and the back transfer from NP2 to NP1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Nanocompression of 20 nm Silver Nanoparticles: In situ Aberration‐Corrected TEM and Atomistic Simulations

Single‐crystalline nanoparticles play an increasingly important role in a wide variety of fields including pharmaceuticals, advanced materials, catalysts for fuel cells, energy materials, as well as environmental detection and monitoring. Yet, the deformation mechanisms of very small nanoparticles are still poorly understood, in particular the role played by single dislocations and their interaction with surfaces. Here, in this work, silver nanoparticles with particularly small dimensions (≈20 nanometers in diameter) are compressed in situ in an aberration‐corrected transmission electron microscopy (TEM) and molecular dynamics (MD) simulations. During compression, the emergence of both dislocations and nanotwins are observed. However, these defects prove to be unstable and disappear upon removal of the indenter. Atomistic simulations confirm the role played by image stresses associated with the nearby surfaces and the reduction in dislocation line length as it approaches the free surface, thereby supporting the experimental observations. These results provide justification for the frequent observation of the absence of dislocations in nanoparticles of a few nanometers in size during in situ experiments, even after significant deformation. This phenomenon contributes to the self‐healing of samples through dislocation ejection toward the surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Silver nanoparticle enhanced metal-organic matrix with interface-engineering for efficient photocatalytic hydrogen evolution

Integrating plasmonic nanoparticles into the photoactive metal-organic matrix is highly desirable due to the plasmonic near field enhancement, complementary light absorption, and accelerated separation of photogenerated charge carriers at the junction interface. The construction of a well-defined, intimate interface is vital for efficient charge carrier separation, however, it remains a challenge in synthesis. Here we synthesize a junction bearing intimate interface, composed of plasmonic Ag nanoparticles and matrix with silver node via a facile one-step approach. The plasmonic effect of Ag nanoparticles on the matrix is visualized through electron energy loss mapping. Moreover, charge carrier transfer from the plasmonic nanoparticles to the matrix is verified through ultrafast transient absorption spectroscopy and in-situ photoelectron spectroscopy. The system delivers highly efficient visible-light photocatalytic H 2 generation, surpassing most reported metal-organic framework-based photocatalytic systems. This work sheds light on effective electronic and energy bridging between plasmonic nanoparticles and organic semiconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Optimization and Multimachine Learning Algorithms to Predict Nanometal Surface Area Transfer Parameters for Gold and Silver Nanoparticles

Interactions between gold metallic nanoparticles and molecular dyes have been well described by the nanometal surface energy transfer (NSET) mechanism. However, the expansion and testing of this model for nanoparticles of different metal composition is needed to develop a greater variety of nanosensors for medical and commercial applications. In this study, the NSET formula was slightly modified in the size-dependent dampening constant and skin depth terms to allow for modeling of different metals as well as testing the quenching effects created by variously sized gold, silver, copper, and platinum nanoparticles. Overall, the metal nanoparticles followed more closely the NSET prediction than for Förster resonance energy transfer, though scattering effects began to occur at 20 nm in the nanoparticle diameter. To further improve the NSET theoretical equation, an attempt was made to set a best-fit line of the NSET theoretical equation curve onto the Au and Ag data points. An exhaustive grid search optimizer was applied in the ranges for two variables, 0.1≤C≤2.0 and 0≤α≤4, representing the metal dampening constant and the orientation of donor to the metal surface, respectively. Three different grid searches, starting from coarse (entire range) to finer (narrower range), resulted in more than one million total calculations with values C=2.0 and α=0.0736. The results improved the calculation, but further analysis needed to be conducted in order to find any additional missing physics. With that motivation, two artificial intelligence/machine learning (AI/ML) algorithms, multilayer perception and least absolute shrinkage and selection operator regression, gave a correlation coefficient, R2, greater than 0.97, indicating that the small dataset was not overfitting and was method-independent. This analysis indicates that an investigation is warranted to focus on deeper physics informed machine learning for the NSET equations.

Demers, Steven M. E. (ORCID:0000000192213246)↗
NASA NTRS2019

Nanopore-Templated Silver Nanoparticle Arrays Photopolymerized in Zero-Mode Wavelengths

In situ fabrication of nanostructures within a solid-polymer electrolyte confined to subwavelength-diameter nanoapertures is a promising approach for producing nanomaterials for nanophotonic and chemical sensing applications. The solid-polymerelectrolyte can be patterned by lithographic photopolymerization of poly(ethyleneglycol) diacrylate (PEGDA)-based silver cation (Ag+)-containing polyelectrolyte. Here, we present a new method for fabricating nanopore-templated Ag nanoparticle (AgNP)arrays by in situ photopolymerization using a zero-mode waveguide (ZMW) array to simultaneously template embedded AgNPs and control the spatial distribution of the optical field used for photopolymerization. The approach starts with an array of nanopores fabricated by sequential layer-by-layer deposition and focused ion beam milling. These structures have an optically transparent bottom, allowing access of the optical radiation to the attoliter-volume ZMW region to photopolymerize a PEGDA monomer solution containing AgNPs and Ag+. The electric field intensity distribution is calculated for various ZMW optical cladding layer thicknesses using finite-element simulations, closely following the light-blocking efficiency of the optical cladding layer. The fidelity of the polyelectrolyte nanopillar pattern was optimized with respect to experimental conditions, including the presence or absence of Ag+ and AgNPs and the concentrations of PEGDA and Ag+. The self-templated approach for photo patterning high-resolution photolabile polyelectrolyte nanostructures directly within a ZMW array could lead to a new class of metamaterials formed by embedding metal nanoparticles within a dielectric in a well-defined spatial array.

Zero-mode waveguide↗