Search NASA⌕ Search

SEARCH · Search NASA

Results for “single-column model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Insights of warm-cloud biases in Community Atmospheric Model 5 and 6 from the single-column modeling framework and Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA) observations

There has been a growing concern that most climate models predict precipitation that is too frequent, likely due to lack of reliable subgrid variability and vertical variations in microphysical processes in low-level warm clouds. In this study, the warm-cloud physics parameterizations in the singe-column configurations of NCAR Community Atmospheric Model version 6 and 5 (SCAM6 and SCAM5, respectively) are evaluated using ground-based and airborne observations from the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA) field campaign near the Azores islands during 2017–2018. The 8-month single-column model (SCM) simulations show that both SCAM6 and SCAM5 can generally reproduce marine boundary layer cloud structure, major macrophysical properties, and their transition. The improvement in warm-cloud properties from the Community Atmospheric Model 5 and 6 (CAM5 to CAM6) physics can be found through comparison with the observations. Meanwhile, both physical schemes underestimate cloud liquid water content, cloud droplet size, and rain liquid water content but overestimate surface rainfall. Modeled cloud condensation nuclei (CCN) concentrations are comparable with aircraft-observed ones in the summer but are overestimated by a factor of 2 in winter, largely due to the biases in the long-range transport of anthropogenic aerosols like sulfate. We also test the newly recalibrated autoconversion and accretion parameterizations that account for vertical variations in droplet size. Compared to the observations, more significant improvement is found in SCAM5 than in SCAM6. This result is likely explained by the introduction of subgrid variations in cloud properties in CAM6 cloud microphysics, which further suppresses the scheme's sensitivity to individual warm-rain microphysical parameters. The predicted cloud susceptibilities to CCN perturbations in CAM6 are within a reasonable range, indicating significant progress since CAM5 which produces an aerosol indirect effect that is too strong. The present study emphasizes the importance of understanding biases in cloud physics parameterizations by combining SCM with in situ observations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A Novel Method for Diagnosing Land–Atmosphere Coupling Sensitivity in a Single-Column Model

The response of boundary layer properties and cloudiness to changes in surface evaporative fraction (EF) is investigated in a single-column model to quantify the locally coupled impact of subgrid surface variations on the atmosphere during summer. Sensitive coupling days are defined when the model atmosphere exhibits large variations across a range of EFs centered on the analyzed value. Coupling sensitivity exists as both positive feedback (cloudiness increases with EF) and negative feedback (clouds increase with decreasing EF) regimes. The positive regime manifests in shallow convection situations, which are capped by a strengthened inversion and subsidence, restricting the vertical extent of convection to just above the boundary layer. Surfaces with larger EF (greater surface latent heat flux) can inject more moisture into the vertically confined system, lowering the cloud base and an increasing cloud liquid water path (LWP). Negative feedback regimes tend to manifest when large-scale deep convection, such as from mesoscale convective systems and fronts, is advected through the domain, where convection strengthens over surfaces with a lower EF (greater surface sensible heat flux). The invigoration of these systems by the land surface leads to an increase in LWP through strengthened updrafts and stronger coupling between the boundary layer and the free atmosphere. These results apply in the absence of heterogeneity-induced mesoscale circulations, providing a one-dimensional dynamical perspective on the effect of surface heterogeneity. Finally, this study provides a framework of intermediate complexity, lying between parcel theory and high-resolution coupled land–atmosphere modeling, and therefore isolates the relevant first-order processes in land–atmosphere interactions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Characterizing Near-Surface Moisture Increase during the Clear-Sky Afternoon-to-Evening Transition Using a Single-Column Model

The afternoon-to-evening transition is the period when the atmospheric boundary layer transitions from convective to stable conditions. One noticeable feature during this transition period is the rapid increase in water vapor concentration near the surface. However, the mechanism behind the increase in water vapor remains poorly understood. This study investigated the processes contributing to the water vapor increase and the impacts of the land cover and horizontal advection on the water vapor increase using a single-column model for the clear-sky condition. Numerical experiments were conducted on three cases at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site. Evapotranspiration was found to be the main moisture source to the water vapor increase, and that change of the near-surface vertical temperature gradient from negative to positive is the trigger for this increase during the afternoon-to-evening transition. This is because the near-surface turbulence divergence term decreases due to the change in the buoyancy profile caused by vertical temperature gradient change. The impact of horizontal advection on water vapor varies, and it can either lead to an increase or a decrease in water vapor, depending on the spatial horizontal water vapor gradient. This study also found that land cover can influence the timing of the water vapor increase since different land covers may have different Bowen ratios. Water vapor increases earlier under conditions with smaller Bowen ratios compared to those with larger values.

Atmosphere-land interaction↗
DOE OSTI2024

Understanding aerosol–cloud interactions using a single-column model for a cold-air outbreak case during the ACTIVATE campaign

Marine boundary layer clouds play a critical role in Earth's energy balance. Their microphysical and radiative properties are highly impacted by ambient aerosols and dynamic forcings. In this study, we evaluate the representation of these clouds and related aerosol–cloud interaction processes in the single-column version of the E3SM climate model (SCM) against field measurements collected during the NASA ACTIVATE campaign over the western North Atlantic, as well as intercompare results with high-resolution process level models. We show that E3SM SCM reproduces the macrophysical properties of post-frontal boundary layer clouds in a cold-air outbreak (CAO) case well. However, it generates fewer but larger cloud droplets compared to aircraft measurements. Further sensitivity tests show that the underestimation of both aerosol number concentration and vertical velocity variance contributes to this bias. Aerosol–cloud interactions are examined by perturbing prescribed aerosol properties in E3SM SCM with fixed dynamics. Higher aerosol number concentration or hygroscopicity leads to more numerous but smaller cloud droplets, resulting in a stronger cooling via shortwave cloud forcing. This apparent Twomey effect is consistent with prior climate model studies. The cloud liquid water path shows a weakly positive relation with cloud droplet number concentration due to precipitation suppression. This weak aerosol effect on cloud macrophysics may be attributed to the dominant impact of strong dynamical forcing associated with the CAO. Our findings indicate that the SCM framework is a key tool to bridge the gap between climate models, process level models, and field observations to facilitate process level understanding.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

The impact of cloud microphysics and ice nucleation on Southern Ocean clouds assessed with single-column modeling and instrument simulators

Abstract. Supercooled liquid clouds are common at higher latitudes (especially over the Southern Ocean) and are critical for constraining climate projections. We take advantage of the Macquarie Island Cloud and Radiation Experiment (MICRE) to perform an analysis of observed and simulated cloud processes over the Southern Ocean in a region and season dominated by supercooled liquid clouds. Using a single-column version of the European Centre for Medium-Range Weather Forecasts (ECMWF) Integrated Forecast System (IFS), we compare two different cloud microphysical schemes to ground-based observations of cloud, precipitation, and radiation over a 2.5-month period (1 January–17 March 2017). Both schemes are able to reproduce aspects of the cloud and radiation observations during MICRE to within the uncertainty of the data when the thermodynamic profile is prescribed with relaxation. There are differences in water mass and representation of reflectivity between the schemes. A sensitivity study of the cloud microphysics schemes, one a bulk one-moment scheme and the other a two-moment scheme with prediction of mass and number, indicates that several key processes create differences between the schemes. Surface radiative fluxes and total water path are highly sensitive to the formation and fall speed of precipitation. The prediction of hydrometeor number with the two-moment scheme yields a better comparison with observed reflectivity and radiative fluxes, despite predicting higher liquid water contents than observed. With the two-moment scheme, we are also able to test the sensitivity of the results to the input of liquid cloud condensation nuclei (CCN) and ice nuclei (IN). The cloud properties and resulting radiative effects are found to be sensitive to the CCN and IN concentrations. More CCN and IN increase liquid and ice water paths, respectively. Thus, both the dynamic environment and aerosols, integrated through the cloud microphysics, are important for properly representing Southern Ocean cloud radiative effects.

58 GEOSCIENCES↗
DOE OSTI2024

RCEMIP-II: mock-Walker simulations as phase II of the radiative–convective equilibrium model intercomparison project

Abstract. The radiative–convective equilibrium (RCE) model intercomparison project (RCEMIP) leveraged the simplicity of RCE to focus attention on moist convective processes and their interactions with radiation and circulation across a wide range of model types including cloud-resolving models (CRMs), general circulation models (GCMs), single-column models, global cloud-resolving models, and large-eddy simulations. While several robust results emerged across the spectrum of models that participated in the first phase of RCEMIP (RCEMIP-I), two points that stand out are (1) the strikingly large diversity in simulated climate states and (2) the strong imprint of convective self-aggregation on the climate state. However, the lack of consensus in the structure of self-aggregation and its response to warming is a barrier to understanding. Gaining a deeper understanding of convective aggregation and tropical climate will require reducing the degrees of freedom with which convection can vary. Therefore, we propose phase II of RCEMIP (RCEMIP-II) that utilizes a prescribed sinusoidal sea surface temperature (SST) pattern to provide a constraint on the structure of convection and move one critical step up the model hierarchy. This so-called “mock-Walker” configuration generates features that resemble observed tropical circulations. The specification of the mock-Walker protocol for RCEMIP-II is described, along with example results from one CRM and one GCM. RCEMIP-II will consist of five required simulations: three simulations with the same three mean SSTs as in RCEMIP-I but with an SST gradient and two additional simulations at one of the mean SSTs with different values of the SST gradients. We also test the sensitivity to the imposed SST gradient and the domain size. Under weak SST gradients, unforced self-aggregation emerges across the entire domain, similar to what was found in RCEMIP. As the SST gradient increases, the convective region narrows and is more confined to the warmest SSTs. At warmer mean SSTs and stronger SST gradients, low-frequency variability in the convective aggregation emerges, suggesting that simulations of at least 200 d may be needed to achieve robust equilibrium statistics in this configuration. Simulations with different domain sizes generally have similar mean statistics and convective structures, depending on the value of the SST gradient. The prescribed SST boundary condition is the only difference in the set-up between RCEMIP-II and RCEMIP-I, which enables comparison between the two; however, we also welcome participation in RCEMIP-II from models that did not participate in RCEMIP-I.

Geology↗
DOE OSTI2023

Quantifying the Impact of Vertical Resolution on the Representation of Marine Boundary Layer Physics for Global-Scale Models

Abstract While GCM horizontal resolution has received the majority of scale improvements in recent years, ample evidence suggests that a model’s vertical resolution exerts a strong control on its ability to accurately simulate the physics of the marine boundary layer. Here we show that, regardless of parameter tuning, the ability of a single-column model (SCM) to simulate the subtropical marine boundary layer improves when its vertical resolution is improved. We introduce a novel objective tuning technique to optimize the parameters of an SCM against profiles of temperature and moisture and their turbulent fluxes, horizontal winds, cloud water, and rainwater from large-eddy simulations (LES). We use this method to identify optimal parameters for simulating marine stratocumulus and shallow cumulus. The novel tuning method utilizes an objective performance metric that accounts for the uncertainty in the LES output, including the covariability between model variables. Optimization is performed independently for different vertical grid spacings and value of time step, ranging from coarse scales often used in current global models (120 m, 180 s) to fine scales often used in parameterization development and large-eddy simulations (10 m, 15 s). Uncertainty-weighted disagreement between the SCM and LES decreases by a factor of ∼5 when vertical grid spacing is improved from 120 to 10 m, with time step reductions being of secondary importance. Model performance is shown to converge at a vertical grid spacing of 20 m, with further refinements to 10 m leading to little further improvement. Significance Statement In successive generations of computer models that simulate Earth’s atmosphere, improvements have been mainly accomplished by reducing the horizontal sizes of discretized grid boxes, while the vertical grid spacing has seen comparatively lesser refinements. Here we advocate for additional attention to be paid to the number of vertical layers in these models, especially in the model layers closest to Earth’s surface where climatologically important marine stratocumulus and shallow cumulus clouds reside. Our experiments show that the ability of a one-dimensional model to represent physical processes important to these clouds is strongly dependent on the model’s vertical grid spacing.

Meteorology & Atmospheric Sciences↗
DOE OSTI2025

Warm-phase microphysical evolution in large-eddy simulations of tropical cumulus congestus: evaluating drop size distribution evolution using polarimetry retrievals, in situ measurements, and a thermal-based framework

Owing to uncertainties in convective microphysics processes, improving parameterizations in Earth system models (ESMs) can benefit from observationally constrained cases suitable for scaling between cloud-resolving models and ESMs. We propose a benchmark large-eddy simulation (LES) cumulus congestus case study from the NASA Cloud, Aerosol, and Monsoon Processes Philippines Experiment (CAMP 2 Ex) for evaluating and improving ESMs in single-column model (SCM) mode. We seek observational constraints using novel polarimetric retrievals and in situ cloud microphysics measurements. Simulations using bulk and bin microphysics initialized with observed aerosol profiles are compared to cloud-top retrievals of cloud droplet effective radius (R eff ), effective variance (ν eff ), and number concentration (N d ) from the airborne Research Scanning Polarimeter (RSP). Both schemes reproduce characteristics of cloud-top N d and R eff that increase and decrease with altitude, respectively. Cloud-top N d is low-biased relative to RSP retrievals in both schemes, potentially due to limitations in both simulations and retrieval assumptions. Cloud-top R eff is low-biased in the bulk scheme but reasonably reproduced by the bin scheme. Profiles of N d and R eff are sensitive to the collision–coalescence process and the vertical variation in aerosol size distribution. Comparison of simulated and in situ droplet size distributions (DSDs) shows that, to first order, integrated moments are always sensitive to sizes < ~ 30 µm and can also be sensitive to larger sizes if the DSDs are sufficiently broad, with implications for the assumed maximum observed size retrieved by the RSP. The bin scheme captures the observed extended tail of the DSD, while the bulk scheme is unable to due to parametric constraints. Differences in expected relationships between in situ measurements of cloud cores and cloud-top retrievals by RSP demonstrate difficulty in constraining well the case presented herein. Finally, a thermal-tracking framework demonstrates that the dilution of N d throughout a thermal's lifetime is heavily determined by collision–coalescence and the height-varying aerosol distribution and that, in the absence of these, the impact of entrainment on diluting N d is largely offset by secondary activation. Implications for evaluating warm-phase convective microphysics schemes in ESMs and translating results for use on global, space-based polarimetry platforms are discussed.

Stanford, McKenna Wallace [Columbia Univ., New Yor↗
DOE OSTI2025

An Improved Convection Parameterization with Detailed Aerosol–Cloud Microphysics for a Global Model

Abstract A new microphysical treatment that includes aerosol–cloud interactions and secondary ice production (SIP) mechanisms is implemented in the convection scheme of the Community Atmosphere Model, version 6 (CAM6). The approach is to embed a 1D Lagrangian parcel model in the bulk convective plume of the existing deep convection parameterization. Aerosol activation, growth processes including collision/coalescence, and three processes of SIP mechanisms, two of which are normally overlooked in atmospheric models, are represented in this embedded parcel model. These microphysical processes are treated with a hybrid bin/bulk scheme and a high spatial and temporal resolution for the integration of the embedded parcel in 1D, allowing vertical velocity to determine the microphysical evolution following the in-cloud motion during ascent. Simulations of an observed case (Midlatitude Continental Convective Clouds Experiment) of a mesoscale convective system in Oklahoma, United States, with a single-column model (SCAM) version of CAM, are compared with aircraft in situ and ground-based observations of microphysical properties from the convection and precipitation. Results from the validation show the new microphysical scheme has a good representation of the ice initiation in the bulk convective plume, including the known and empirically quantified pathways of primary and secondary initiation, with benefits for the accuracy of properties of its supercooled cloud liquid. The sensitivity simulations and use of tagging tracers for the validated simulation confirm that the newly included SIP mechanisms are of paramount importance for convective microphysics and can be successfully treated in the global model.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Adaptive Grid Redistribution for a 1D Model of Turbulence and Clouds

In global atmospheric models, resolving stratocumulus (Sc) in the vertical is computationally expensive. However, Sc appear only under special meteorological conditions. Therefore, there is motivation to refine the vertical grid levels adaptively. In order to facilitate the possibility of parallelization on graphical processing units, our grid adaptation method prescribes the number of vertical levels a priori. Then grid levels are relocated toward altitude ranges in need of refinement. Because the method relocates existing grid levels, rather than adding extra levels, there is a risk of creating regions with overly coarse grid spacing, that is, voids in the grid mesh. To prevent such voids from forming, a simple method is developed to impose a maximum grid spacing. To decide where to place enhanced resolution, the authors develop an empirical mesh refinement criterion. It refines grid spacing near the ground, near strong temperature gradients, and within clouds. Our grid adaptation method is implemented in a single-column model and evaluated on four test cases: decaying stratocumulus, developing shallow cumulus, a quasi-stationary stratocumulus deck, and the diurnal cycle of a dry boundary layer. In the stratocumulus cases, mesh refinement leads to improvements in both the time evolution of fields and their time averages. The other two cases show smaller differences.

Carstensen, Steffen [Univ. of Wisconsin, Milwaukee↗
DOE OSTI2024

A Case Study Investigating the Low Summertime CAPE Behavior in the Global Forecast System

Convective available potential energy (CAPE) is an important index for storm forecasting. Recent versions (v15.2 and v16) of the Global Forecast System (GFS) predict lower values of CAPE during summertime in the continental United States than analysis and observation. We conducted an evaluation of the GFS in simulating summertime CAPE using an example from the Unified Forecast System Case Study collection to investigate the factors that lead to the low CAPE bias in GFS. Specifically, we investigated the surface energy budget, soil properties, and near-surface and upper-level meteorological fields. Results show that the GFS simulates smaller surface latent heat flux and larger surface sensible heat flux than the observations. This can be attributed to the slightly drier-than-observed soil moisture in the GFS that comes from an offline global land data assimilation system. The lower simulated CAPE in GFS v16 is related to the early drop of surface net radiation with excessive boundary layer cloud after midday when compared with GFS v15.2. A moisture-budget analysis indicates that errors in the large-scale advection of water vapor does not contribute to the dry bias in the GFS at low levels. Common Community Physics Package single-column model (SCM) experiments suggest that with realistic initial vertical profiles, SCM simulations generate a larger CAPE than runs with GFS IC. SCM runs with an active LSM tend to produce smaller CAPE than that with prescribed surface fluxes. Note that the findings are only applicable to this case study. Including more warm-season cases would enhance the generalizability of our findings.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Development of the ARM Lagrangian Large-Scale Forcing Data (ARMLAGTRAJ) Value-Added Product Based on the lagtraj Framework

The Atmospheric Radiation Measurement (ARM) large-scale forcing data developed based on the constrained variational analysis (VARANAL) value-added product (VAP) (Zhang and Lin 1997, Zhang et al. 2001, Xie et al. 2004, Tang et al. 2019) has been widely used for single-column models (SCMs), cloud-resolving models (CRMs), and large-eddy simulation models (LESs) to understand and improve physical processes in models. Recently, the U.S. Department of Energy (DOE) ARM user facility conducted several major field campaigns using ship-based moving observational platforms. For example, the Marine ARM GPCI Investigation of Clouds (MAGIC) field campaign focused on the role of subtropical marine-boundary layer (MBL) clouds, and the Multidisciplinary Drifting Observatory for the Study of Arctic Climate (MOSAiC) field campaign aimed to improve understanding of the coupled climate systems in the Arctic. Observations from moving platforms are critical to provide a comprehensive characterization of coupled-system processes associated with all stages of the cloud and/or sea-ice life cycle. Traditional ARM large-scale forcing data have been developed at fixed locations. They need to be extended to include these moving platforms to address data needs for ship-based field campaigns or to support LES modeling in a Lagrangian framework. With these considerations in mind, we develop ARM-type Lagrangian large-scale forcing data sets based on the lagtraj framework (Boeing et al. 2020) with notable enhancements in generating forcings that are more suitable for ARM field campaigns. The lagtraj is a novel tool that generates forcings for LES and SCM simulation in both Lagrangian and Eulerian perspective. This technical report focuses on the major changes we performed on the lagtraj algorithm and provides an overview of the ARM Lagrangian Large-Scale Forcing Data (ARMLAGTRAJ) value-added products.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

3D Continuous Forcing Dataset from 3D Constrained Variational Analysis at SGP

The continuous 3D large-scale forcing (VARANAL3D) data set derived from 3D constrained variational analysis (3DCVA) extends the conventional constrained variational analysis method by incorporating multiple sub-columns within the analysis domain. This advancement introduces spatial variability into the large-scale forcing fields, thereby enriching the data set’s applicability. The VARANAL3D data set spans from 2004 to 2018 and covers a region of 5˚×4.5˚ domain around the ARM SGP site. The analysis domain is divided into 10×9 sub-columns with 0.5˚ resolution. The 3D large-scale forcing data provides necessary variables to drive and evaluate single-column models (SCM), cloud-resolving models (CRM) ,and large-eddy simulations (LES), as well as information for testing model sensitivity to spatial variability of the large-scale forcing data, facilitating more rigorous testing and refinement of physical processes in SCM/CRM/LES.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Assessing the Atmospheric Response to Subgrid Surface Heterogeneity in the Single-Column Community Earth System Model, Version 2 (CESM2)

Land-atmosphere interactions are central to the evolution of the atmospheric boundary layer and the subsequent formation of clouds and precipitation. Existing global climate models represent these connections with bulk approximations on coarse spatial scales, but observations suggest that small-scale variations in surface characteristics and co-located turbulent and momentum fluxes can significantly impact the atmosphere. Recent model development efforts have attempted to capture this phenomenon by coupling existing representations of subgrid-scale (SGS) heterogeneity between land and atmosphere models. Such approaches are in their infancy and it is not yet clear if they can produce a realistic atmospheric response to surface heterogeneity. Here, we implement a parameterization to capture the effects of SGS heterogeneity in the Community Earth System Model (CESM2), and compare single-column simulations against high-resolution Weather Research and Forecasting (WRF) large-eddy simulations (LESs), which we use as a proxy for observations. The CESM2 experiments increase the temperature and humidity variances in the lowest atmospheric levels, but the response is weaker than in WRF-LES. In part, this is attributed to an underestimate of surface heterogeneity in the land model due to a lack of SGS meteorology, a separation between deep and shallow convection schemes in the atmosphere, and a lack of explicitly represented mesoscale secondary circulations. These results highlight the complex processes involved in capturing the effects of SGS heterogeneity and suggest the need for parameterizations that communicate their influence not only at the surface but also vertically.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Demonstrating Hierarchical System Development With the Common Community Physics Package Single‐Column Model: A Case Study Over the Southern Great Plains

This study demonstrates a specific application of the hierarchical system development (HSD) approach to investigate, analyze, and attribute model issues within the Unified Forecast System (UFS), with a focus on process isolation. By evaluating a non‐precipitating, shallow cumulus case at the Atmospheric Radiation Measurement Southern Great Plains site in the UFS global forecast against the observation, the investigation identifies a warmer and deeper daytime convective planetary boundary layer (PBL) and misrepresented nocturnal PBL transition. Hypothesis testing, which employs the Common Community Physics Package (CCPP) single‐column model (SCM) and uses the same physics as the UFS global model, confirms that these issues are attributed to the model physics and initialization. Specifically, misrepresented PBL processes are linked to problematic surface condition and a lack of cloud formation, which may stem from deficiencies in PBL and cloud microphysics parameterizations and their interactions. The UFS initial condition contributes to an earlier, excessively collapsed daytime convective boundary layer and a lack of decoupling between the stable boundary layer and residual layer late in the afternoon. This work introduces an avenue for the community to engage with the application of HSD, along with the CCPP and CCPP SCM, to understand the interplay of model physics, disentangle the roles of model components, as well as facilitate model and forecast improvement.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Environmental Thermodynamic Effects on Future Changes of Mesoscale Convective Systems and Isolated Deep Convection Over the US: A Case Study

Mesoscale convective systems (MCSs) and isolated deep convection (IDC) significantly influence local weather conditions and the hydrological cycle across the United States. Their future changes under warming is critical to the society. However, the exact impacts of thermodynamic environmental changes on them are difficult to resolve using climate model simulations which integrate both dynamic and thermodynamic factors. This study explores a theoretical modeling approach to isolate environmental thermodynamic effects on their future changes through a case study. For a 50-day period during the 2020 summer, a pair of convection-permitting model simulations indicate contrasting changes in MCSs and IDC between inland and coastal regions under pseudo global warming. Driven by the thermodynamic environments of these simulations, a single-column parcel model indicates a decrease in the frequency of IDC occurrences, along with increases in duration and precipitation amount under warming, attributable to rising most unstable convective available potential energy (MUCAPE), convective inhibition (MUCIN), and precipitable water (PW). A multi-column parcel model reveals contrasting changes in the frequency and mean area of MCSs between inland and coastal regions, underscoring the increase in mean MUCIN over inland regions and increases in mean MUCAPE and PW over coastal regions. The increase in mean MCS area over inland regions is linked to the interplay between accelerated gust fronts and enhanced subsidence strength, which is further traced to the unchanged mean MUCIN but increased mean MUCAPE in large-scale environments. In conclusion, these case study results suggest a major role of thermodynamic environmental changes in controlling characteristics of MCSs and IDC under warming.

Mesoscale convective system↗
DOE OSTI2023

A Finite-Time Ensemble Method for Mixed Layer Model Comparison

Here, this work evaluates the fidelity of various upper-ocean turbulence parameterizations subject to realistic monsoon forcing and presents a finite-time ensemble vector (EV) method to better manage the design and numerical principles of these parameterizations. The EV method emphasizes the dynamics of a turbulence closure multimodel ensemble and is applied to evaluate 10 different ocean surface boundary layer (OSBL) parameterizations within a single-column (SC) model against two boundary layer large-eddy simulations (LES). Both LES include realistic surface forcing, but one includes wind-driven shear turbulence only, while the other includes additional Stokes forcing through the wave-average equations that generate Langmuir turbulence. The finite-time EV framework focuses on what constitutes the local behavior of the mixed layer dynamical system and isolates the forcing and ocean state conditions where turbulence parameterizations most disagree. Identifying disagreement provides the potential to evaluate SC models comparatively against the LES. Observations collected during the 2018 monsoon onset in the Bay of Bengal provide a case study to evaluate models under realistic and variable forcing conditions. The case study results highlight two regimes where models disagree 1) during wind-driven deepening of the mixed layer and 2) under strong diurnal forcing.

54 ENVIRONMENTAL SCIENCES↗