Site-Isolated Upconversion Nanoparticle Arrays Synthesized in Polyol Nanoreactors
Not provided.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not provided.
We report here the preparation and investigation of isolated Zr centers supported on a high surface area silica for the conversion of carboxylic acids to internal ketones by ketonic decarboxylation (ketonization) and the aldol condensation of ketones to dimeric enones. Catalysts were synthesized by the grafting of Cp 2 ZrCl 2 on the surface of amorphous silica. The connectivity of Zr was characterized by XRD, UV-vis, and Raman spectroscopy. For the lowest Zr loading, Zr is present predominantly as isolated monomeric species. As the Zr loading is increased, a progressively larger fraction of Zr forms oligomeric species and ZrO nanoparticles. Measurements of catalytic activity show that the turnover frequency for carboxylic acid ketonic decarboxylation reaction and aldol condensation of ketones decreases monotonically with increasing Zr loading. An H/D kinetic isotope effect was not observed over isolated Zr catalysts, suggesting that α-H abstraction is not the rate-determining step, rather C-C bond forming may be rate limiting for both reactions. This conclusion is supported by computational modeling of the reaction mechanism. The proposed catalytic cycle for ketonization proceeds via a β-keto acid intermediate on isolated Zr sites that are always coordinatively saturated with C-C bond formation as the rate-limiting step. C-C bond formation is also rate-determining for aldol condensation, with an apparent activation energy that is in good agreement with the experiment if the resting state is a saturated ≡ZrOH site with two adsorbed ketone molecules.
Phthalocyanine (Pc), an electro-redox active moiety, has many attractive properties stemming from its large aromatic system and ability to act as a catalyst in electrochemical reactions, such as the CO 2 reduction reaction (CO 2 RR). However, due to the synthetic challenge related to geometric requirements and poor solubility (strong aggregation), discrete shape-persistent cages consisting of site-isolated, readily accessible Pc moieties have not been available. Here, we report the synthesis of Zn- and Ni-metallated Pc-based molecular cages via one-step dynamic spiroborate linkage formation in high yields. The ZnPc cage structure is unambiguously elucidated at the atomic level by single-crystal X-ray diffraction. Moreover, owing to the site-isolated redox-active metal centers, readily accessible intrinsic cavity, and shape-persistent backbone, the Ni-metallated Pc (NiPc) cage exhibits high catalytic efficiency, selectivity, and stability, superior to the non-caged control molecules in electrocatalytic CO 2 RR.
The selective production of C3+ olefins from renewable feedstocks, especially via C1 and C2 platform chemicals, is a critical challenge for obtaining economically viable low-carbon middle distillate transportation fuels (i.e., jet and diesel). Here, we report a multifunctional catalyst system composed of Zn-Y/Beta and “single-atom” alloy (SAA) Pt-Cu/Al2O3 which selectively catalyzes ethanol-to-olefins (C3+, ETO) valorization in the absence of cofed hydrogen, forming butenes as the primary olefin products. Beta zeolites containing predominately isolated Zn and Y metal sites catalyze ethanol upgrading steps (588 K, 3.1 kPa ethanol, ambient pressure) regardless of cofed hydrogen partial pressure (0-98.3 kPa H2), forming butadiene as the primary product (60% selectivity at 87% conversion). The Zn-Y/Beta catalyst possesses site-isolated Zn and Y Lewis acid sites (at ~7 wt% Y) and Brønsted acidic Y sites, the latter of which has been previously uncharacterized. A secondary bed of SAA Pt-Cu/Al2O3 selectively hydrogenates butadiene to butene isomers at a consistent reaction temperature using hydrogen generated in situ from ethanol-to-butadiene (ETB) conversion. This unique hydrogenation reactivity at near-stoichiometric hydrogen and butadiene partial pressures is not observed over monometallic Pt or Cu catalysts, highlighting these operating conditions as a critical SAA catalyst application area for conjugated diene selective hydrogenation at high reaction temperatures (>573 K) and low H2/diene ratios (e.g., 1:1). Single-bed steady state selective hydrogenation rates, associated apparent hydrogen and butadiene reaction orders, and DFT calculations of the Horiuti-Polanyi reaction mechanisms indicate that the unique butadiene selective hydrogenation reactivity over SAA Pt-Cu/Al2O3 reflects lower hydrogen scission barriers relative to monometallic Cu surfaces and limited butene binding energies relative to monometallic Pt surfaces. DFT calculations further indicate the preferential desorption of butene isomers over SAA Pt-Cu(111) and Cu(111) surfaces while Pt(111) surface favors subsequent butene hydrogenation reactions to form butane over butene desorption events. Under operating conditions without of hydrogen cofeeding, this combination of Zn-Y/Beta and SAA Pt-Cu catalysts can selectively form butenes (65% butenes, 78% C3+ selectivity at 94% conversion) and avoid butane formation using only in situ generated hydrogen, avoiding costly hydrogen cofeeding requirements that hinder many renewable energy processes.
Multicompartment micelles (MCMs) containing acid and base sites in discrete domains are prepared from poly(norbornene)-based amphiphilic bottlebrush copolymers in aqueous media. Here, the acid and base sites are localized in different compartments of the micelle, enabling the nonorthogonal reaction sequence: deacetalization – Knoevenagel condensation – Michael addition of acetals to 2-amino chromene derivatives. Computational simulations using dissipative particle dynamics (DPD) elucidated the bottlebrush composition required to effectively site-isolate the nonorthogonal catalysts. This contribution presents MCMs as a new class of nanostructures for one-pot multistep nonorthogonal cascade catalysis, laying the groundwork for the isolation of three or more incompatible catalysts to synthesize value-added compounds in a single reaction vessel, in water.
Dianionic hyponitrite (N 2 O 2 2- ) is often proposed, based on model complexes, as the key intermediate in reductive coupling of nitric oxide to nitrous oxide at the bimetallic active sites of heme-copper oxidases and nitric oxide reductases. In this work, we examine the gas-solid reaction of nitric oxide with the metal–organic framework Cu I -ZrTpmC* with a suite of in situ spectroscopies and density functional theory simulations, and identify an unusual chelating N 2 O 2 .- intermediate. These results highlight the advantage provided by site-isolation in metal–organic frameworks (MOFs) for studying important reaction intermediates, and provide a mechanistic scenario compatible with the proposed one-electron couple in these enzymes.
A highly efficient water-tolerant, solid-base catalyst for the self-condensation of biomass-derived methyl ketones to jet-diesel fuel precursors was developed by grafting site-isolated secondary amines on silica-alumina supports. Here, it is shown that apart from the nature and density of amine groups and the spatial separation of the acidic and basic sites, the acidity of the support material plays a critical role in defining the catalytic activity. It is also found that a combination of weakly acidic silanol/aluminol with secondary amine groups can mimic proline catalysts and are more effective in catalyzing the selective dimerization reaction than the combination of amines with organic acids. In situ FTIR measurements demonstrate that acidic groups activate methyl ketones through their carbonyl groups leading to a favorable C-C bond formation step involving an enamine intermediate. DFT analysis of the reaction pathway confirms that C-C bond formation is the rate-limiting step.
Installed on the zirconia nodes of a metal-organic framework (MOF) NU-1000 via targeted vapor-phase synthesis. The catalytic Pt clusters, site-isolated by organic linkers, are shown to exhibit high catalytic activity for ethylene hydrogenation while exhibiting resistance to sintering up to 200 degrees C. In situ IR spectroscopy reveals the presence of both single atoms and few-atom clusters that depend upon synthesis conditions. Operando X-ray absorption spectroscopy and Xray pair distribution analyses reveal unique changes in chemical bonding environment and cluster size stability while on stream. Density functional theory calculations elucidate a favorable reaction pathway for ethylene hydrogenation with the novel catalyst. Lastly, these results provide evidence that atomic layer deposition (ALD) in MOFs is a versatile approach to the rational synthesis of size-selected clusters, including noble metals, on a high surface area support.
Metal–organic frameworks (MOFs) have garnered substantial interest as platforms for site-isolated catalysis. Efficient diffusion of small-molecule substrates to interstitial lattice-confined catalyst sites is critical to leveraging unique opportunities of these materials as catalysts. Understanding the rates of substrate diffusion in MOFs is challenging, and few in situ chemical tools are available to evaluate substrate diffusion during interstitial MOF chemistry. Herein, we demonstrate nitrogen atom transfer (NAT) from a lattice-confined Ru 2 nitride to toluene to generate benzylamine. We use the comparison of the intramolecular deuterium kinetic isotope effect (KIE), determined for amination of a partially deuterated substrate, with the intermolecular KIE, determined by competitive amination of a mixture of perdeuterated and undeuterated substrates, to establish the relative rates of substrate diffusion and interstitial chemistry. We anticipate that the developed KIE-based experiments will contribute to the development of porous materials for group-transfer catalysis.
Boron-containing materials have recently been identified as highly selective catalysts for the oxidative dehydrogenation (ODH) of alkanes to olefins. It has previously been demonstrated by several spectroscopic characterization techniques that the surface of these boron-containing ODH catalysts oxidize and hydrolyze under reaction conditions, forming an amorphous B 2 (OH) x O (3–x/2) (x=0–6) layer. Yet, the precise nature of the active site(s) remains elusive. In this Communication, we provide a detailed characterization of zeolite MCM-22 isomorphously substituted with boron (B-MWW). Using 11 B solid-state NMR spectroscopy, we show that the majority of boron species in B-MWW exist as isolated BO 3 units, fully incorporated into the zeolite framework. However, this material shows no catalytic activity for ODH of propane to propene. The catalytic inactivity of B-MWW for ODH of propane falsifies the hypothesis that site-isolated BO 3 units are the active site in boron-based catalysts. Furthermore, this observation is at odds with other traditionally studied catalysts like vanadium-based catalysts and provides an important piece of the mechanistic puzzle.
Spatial confinement of multiple catalysts presents an effective strategy for performing sequential or tandem chemical transformations in a one-pot reaction. These methods may be used to catalyze numerous reactions in conditions that are otherwise incompatible between catalyst and solvent, different catalysts, or reagents. Appropriate site isolation or support structure design would lead to significant advantages in atom economy, purification, and costs and the development of the interface between a catalyst and its confined microenvironment is paramount for realizing the next-generation of nanoreactors. Polymer scaffolds can create tailor-made microenvironments resulting in catalyst compartmentalization. Through the optimization of a number of variables such as size, solubility, functionality, and morphology of the nanoreactor, catalyst activity and selectivity can be tuned. In this Feature Article, we introduce design principles and early strategies for polymer supports for catalyst site-isolation and discuss current strategies towards multi-compartment polymer nanoreactors for non-orthogonal cascade catalysis. We conclude by outlining future design trends in this burgeoning field.
In this study, the preparation of a new class of reactive porous solids, prepared via straightforward salt metathesis reactions, is described here. Reaction of the dimethylammonium salt of a magnesium-based porous coordination cage with the chloride salt of [Cr II Cl(Me 4 cyclam)] + affords a porous solid with concomitant removal of dimethylammonium chloride. The salt consists of the ions combined in the expected ratio based on their charge as confirmed by UV–vis and X-ray photoelectron spectroscopies, ion chromatography (IC), and inductively coupled plasma mass spectrometry (ICP-MS). The porous salt boasts a Brunauer-Emmett-Teller (BET) surface area of 213 m 2 g -1 . Single crystal X-ray diffraction reveals the chromium(II) cations in the structure reside in the interstitial space between porous cages. Importantly, the chromium(II) centers, previously shown to react with O 2 to afford reactive chromium(III)-superoxide adducts, are still accessible in the solid state as confirmed by UV–vis spectroscopy. The site-isolated reactive centers have competence toward hydrogen atom abstraction chemistry and display significantly increased stability and reactivity as compared to dissolved ions.
In this work, supported iridium complexes were synthesized by the reaction of Ir(CO) 2 (acac) (acac = acetylacetonato) with SiO 2 , γ-Al 2 O 3 , and MgO. Extended X-ray absorption fine structure (EXAFS) and infrared (IR) spectra demonstrate that the iridium was present as atomically dispersed species anchored to each support. The samples were treated in flowing H 2 at 673 K to form supported iridium clusters. EXAFS spectra and high-angle annular dark-field scanning transmission electron microscopy images demonstrate that the average diameter of the iridium clusters on each support was approximately 1.2 nm. Furthermore, the catalysts before and after cluster formation were coated with each of a family of 1,3-dialkylimidazolium ionic liquids (ILs) having varying electron-donor tendencies probed by their υ(C2H) frequencies determined by IR spectroscopy. The coated and uncoated samples were tested as catalysts for partial hydrogenation of 1,3-butadiene in a flow reactor at 333 K, with turnover frequencies determined from differential conversions. The individual influences of the IL coatings and supports on the catalyst performance were found to depend strongly on whether the iridium was site-isolated complexes or present in clusters. The IL coatings as ligands exerted dominant effects on the clusters as catalysts, whereas the supports exerted dominant effects on the isolated iridium atoms. The results indicate how to tune the effects of metal nuclearity, IL coatings, and supports on the electronic environments and catalytic properties of the metals.
Previous attempts to characterize the γ-brass crystal structure of Ni–Zn (15.4–24% Ni) have failed to identify the location of the Ni and Zn atoms in the crystal lattice for more than 15.4% Ni content (Ni 8 Zn 44 ) due to the similar X-ray diffraction cross sections of Ni and Zn. Ni 8 Zn 44 is known to have a typical γ-brass crystal structure (space group 217, I$\overline{43}$m, 52 atom unit cell with four distinct symmetry positions: inner tetrahedral, outer tetrahedral, octahedral, and cuboctahedral) where Ni atoms reside in outer tetrahedral sites completely isolated from each other and coordinated by 12 Zn atoms. We utilize neutron diffraction to identify the substitution positions of Zn by Ni when the Ni content is increased above 15.4% and up to 19.2% (Ni 10 Zn 42 ). Upon increasing the Ni content above 15.4% (Ni 9 Zn 43 and Ni 10 Zn 42 ), Zn in the γ-brass octahedral positions are replaced by Ni leading to the formation of Ni–Ni–Ni trimers, which are absent in Ni8Zn44. Density functional theory (DFT) calculations confirm our neutron diffraction results regarding the optimal position of excess Ni in the γ-brass unit cell. The well-defined atomic site distribution in γ-brass Ni–Zn provides an excellent opportunity for producing site-isolated base metal catalysts that may find application in selective semi-hydrogenation. We investigated the presence of Ni–Ni–Ni trimers on the surface using H–D exchange and ethylene hydrogenation as probe reactions, observing the influence of Ni concentration on catalysis. We conclude the catalytic performance is insensitive to Ni content. We provide a possible explanation for this observation using DFT calculations, which demonstrate that surface containing trimer sites are energetically unfavorable and therefore not exposed on Wulff reconstructions of γ-brass phase Ni–Zn particles.
We investigate the chemical reactions involved during the synthesis of supported vanadium oxide catalysts using chemical grafting of vanadium oxytriisopropoxide (VO(O i Pr) 3 ) to thermally pretreated silica under solvent-free conditions. VO(O i Pr) 3 is found to react with both site-isolated silanol (Si–OH) groups and strained siloxane (≡Si–O–Si≡) bridges at the silica surface. Solid-state 51 V and 13 C MAS NMR confirms the formation of two slightly different vanadium species associated with the two anchoring mechanisms. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), in situ Raman spectroscopy, and thermogravimetric analysis-differential scanning calorimetry-mass spectrometry (TGA-DSC-MS) were used to study the subsequent calcination, revealing the formation of a transient V—OH intermediate upon the release of propene, followed by the formation of isolated VO 4 surface species upon elimination of water. X-ray absorption spectroscopy (XAS) and 51 V MAS NMR of the calcined material confirm the conversion of the two original vanadium sites to a species with a single isotropic shift, confirming the formation of isolated, tetrahedral VO 4 sites.
The Pd–Zn γ-brass phase provides exciting opportunities for synthesizing site-isolated catalysts with precisely controlled Pd active site ensembles. Introducing a third metallic element into the γ-brass lattice further perturbs the catalytic active site ensembles. Here, in this work, we introduce coinage metallic elements M (M = Cu, Ag, and Au) into the Pd–Zn γ-brass phase and investigate the site occupation factors of each element in the γ-brass lattice. The CALculation of PHAse Diagrams (CALPHAD) modeling approach supported by energetics predicted by the density functional theory and X-ray and neutron diffraction with Rietveld refinement were used to identify the SOF on each Wyckoff site for various M amounts alloyed into the Pd–Zn γ-brass phase. The present analysis unveils the strong preference for Pd occupying the outer tetrahedral (OT) site in the γ-brass lattice, while the coinage metallic elements tend to substitute for Zn on the octahedral (OH) site. The determination of site occupancy in the bulk M–Pd–Zn γ-brass phase provides opportunities to investigate and tailor potential catalytically active site ensembles in the γ-brass phase materials.
Nanocasting can be a useful strategy to transfer the catalytic metal clusters in metal-organic frameworks (MOFs) to an all-inorganic support such as silica. The incorporation of silica in the MOF pores as a secondary support has the potential to extend the application of the highly tunable metal-based active sites in MOFs to high temperature catalysis. Here, we demonstrate the applicability of the nanocasting method to a range of MOFs that incorporate catalytically attractive hexazirconium, hexacerium, or pentanickel oxide-based clusters (UiO-66, (Ce)UiO-66, (Ce)UiO-67, (Ce)MOF-808, DUT-9, and In- and Ni-post-metalated NU-1000). We describe, in tutorial form, the challenges associated with nanocasting of MOFs that are related to their small pore size and to considerations of chemical and mechanical stability, and we provide approaches to overcome some of these challenges. Finally, some of these nanocast materials feature the site-isolated clusters in a porous, thermally stable silica matrix, suitable for catalysis at high temperatures; in others, structural rearrangement of clusters or partial cluster aggregation occurs, but extensive aggregation can be mitigated by the silica skeleton introduced during nanocasting.