Search NASA⌕ Search

SEARCH · Search NASA

Results for “skin effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

ANOMALOUS SKIN EFFECT STUDY OF NORMAL CONDUCTING FILM

For the radiofrequency (RF) applications of normal conducting film with large mean free path at high frequency and low temperature, the anomalous skin effect differs considerably from the normal skin effect with field decaying exponentially in the film. Starting from the relationship be-tween the current and the electric field (E field) in the film, the amplitude of E field along the film depth is calculated and is found to be non-monotonic. The surface impedance is found to have a minimum value at certain film thickness.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Influence of the neutron-skin effect on nuclear isobar collisions at energies available at the BNL Relativistic Heavy Ion Collider

The unambiguous observation of a Chiral Magnetic Effect (CME)-driven charge separation is the core aim of the isobar program at RHIC consisting of $96\atop{40}$Zr+$96\atop{40}$Zr and $96\atop{44}$Ru+$96\atop{44}$Ru collisions at √s NN = 200 GeV. We quantify the role of the spatial distributions of the nucleons in the isobars on both eccentricity and magnetic field strength within a relativistic hadronic transport approach (SMASH, Simulating Many Accelerated Strongly-interacting Hadrons). In particular, we introduce isospin-dependent nucleon-nucleon spatial correlations in the geometric description of both nuclei, deformation for $96\atop{44}$Ru and the so-called neutron skin effect for the neutron-rich isobar i.e. $96\atop{40}$Zr. The main result of this study is a reduction of the magnetic field strength difference between $96\atop{44}$Ru+$96\atop{44}$Ru and $96\atop{40}$Zr+$96\atop{40}$Zr by a factor of 2, from 10% to 5% in peripheral collisions when the neutron-skin effect is included. Further, we find an increase of the eccentricity ratio between the isobars by up to 10% in ultra-central collisions as due to the deformation of $96\atop{44}$Ru while neither the neutron skin effect nor the nucleon-nucleon correlations result into a significant modification of this observable with respect to the traditional Woods-Saxon modeling. Our results suggest a significantly smaller CME signal to background ratio for the experimental charge separation measurement in peripheral collisions with the isobar systems than previously expected.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Fracture Adjacent Matrix Permeability: Insights from a Direct Experimental Approach

Description of a measurement technique, using a triple-pressure tap Hassler Style Core holder, that facilitates pressure measurement perpendicular to a fracture. Through the measurement of permeability changes at multiple distances from the fracture, this system enables an understanding of how end effects and localized ‘skin effects’ can impact the ability of fluids to move to and from the bulk matrix. Measurements of this type may lead to improved input values for reservoir simulations involving discrete fractures and/or dual-permeability.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Computational study of the effect of core–skin structure on the mechanical properties of carbon nanofibers

The effect of the core–skin structure on the mechanical properties of carbon nanofibers is investigated in large-scale molecular dynamics simulations of tensile deformation of carbon nanofibers with the core–skin and homogeneous structures. Contrary to an established notion of the deleterious effect of the skin layer on the strength of carbon fibers, the presence of a high-quality skin layer is found to increase both the Young’s modulus and tensile strength of the nanofiber. A detailed analysis of the fracture process indicates that the nanofiber strengthening is related to the ability of skin layer to suppress crack nucleation at the core–skin interface. Furthermore, the computational predictions suggest that the design of new approaches to carbon fiber manufacturing and processing leading to the generation of a high-quality skin layer while avoiding the introduction of structural defects at the core–skin interface may yield a significant enhancement of the mechanical properties of carbon fibers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Simultaneous Isotopic Analysis of U, Pu, and Am in Spent Nuclear Fuel by Resonance Ionization Mass Spectrometry

Solid samples of spent nuclear fuel were analyzed for actinide isotopic composition by resonance ionization mass spectrometry. Isotopes of U, Pu, and Am were simultaneously quantified using a new method that removes and/or resolves the isobaric interferences at 238 U/ 238 Pu and 241 Pu/ 241 Am without sample preparation other than cutting and mounting small (~10 μm) samples. Trends in burnup and neutron capture product distributions were correlated with the sampling positions inside the reactor. Overall, the results show the skin effect, in which the core and near-edge regions of a fuel pellet exhibit strong differences in actinide concentrations and isotope distributions due to differences in the neutron energy spectra between the pellet rim and the core. While no elemental concentration measurements were made, the ability to measure the 238 Pu/ 239 Pu ratio in the presence of a 7400× excess of 238 U enabled an estimate of the enhancement in Pu concentration due to the skin effect at the rim of the pellet.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Integration of Ultrawide Bandgap Photoconducting Semiconductor Switches into High-Voltage, High-Current Pulser Systems

In this feasibility study we will evaluate the viability of integrating ultrawide bandgap (UWBG) photoconducting semiconductor switches (PCSS) in high-voltage pulser systems capable of driving low-impedance dynamic loads critical for next-generation accelerator and RF-source applications. The project consisted of developing modelling tools that would inform design of UWBG PCSS packages that could be mounted onto conventional circuit boards. Specifically, we are interested in evaluating the following through simulation software: (1) resistance to electrical breakdown (2) proximity effects due to high-frequency skin effect (3) transient behavior from switching (4) effective transmission of RF signals (5) thermal dynamics of the switch under operation (6) sensitivity to inhomogeneities in optical excitation of the material (7) cross-talk effects from parallel switching structures, and (8) susceptibility of system to damaged components. The project resulted in the development of a special-purpose circuit code that implements photoconductivity physics. This code was used to evaluate objectives 1-6 above, identifying a critical requirement associated with the need for fine control of dopant concentrations in the UWBG material to reach an optimal solution for voltage standoff and laser light responsivity requirements. In addition, we identified that the temperature dependence of the electrical conductivity of this material was typically not well-measured and developed a platform for measuring both the “dark” and “illuminated” conductivity on real physical switches in the lab to better inform our models.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

ORBUMP Pulsed Dipole Magnet Design for Fermilab Booster

Fermilab initiated the accelerator magnet system upgrade project PIP-II for future neutrino experiments. Old ORBUMP pulsed dipoles should be replaced with new stronger magnets occupying the same space as old ones. Four of these magnets connected in series form dogleg type of proton beam orbit. The magnet field and 19 kA current pulse length are close to 1 ms. Old magnet cores were based on a ferrite material. For new magnets, a magnet gap field is above 0.4 T, which completely saturates ferrite material. So, for the magnet core, 0.127 mm thick laminations of low carbon steel with inorganic coating, as the magnet were placed in a vacuum box. There were investigated transient magnet parameters including skin effect in the iron core and in the single-turn copper coil. The integrated field homogeneity was improved by the copper coil shimming. Simulated by OPERA3D power losses were used for the thermal analysis by ANSYS code. The magnet performance is strongly coupled with the power source. The dynamic magnet inductance and resistance were included in the pulsed power source design. Finally, the paper presented the ORBUMP magnet system design.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Interplay of effects of neutron skins in coordinate space and proton skins in momentum space on emission of hard photons in heavy-ion collisions near the Fermi energy

Within an isospin- and momentum-dependent Boltzmann-Uehling-Uhlenbeck transport model, we investigate the hard photons emission from neutron-proton bremsstrahlung in the reaction system of 208 Pb + 208 Pb around Fermi energy. Effects of neutron skins in coordinate (r) space and proton skins in momentum (k) space on the time evolution, the angular distribution, and the transverse momentum spectra of hard photons with different energies are studied. It is shown that the emission of direct hard photons is sensitive to the neutron skin, which has larger effects for more energetic hard photons. Meanwhile, we find that the proton skins have an important influence on the emission of direct hard photons, and its effect is actually even larger than that of neutron skins. Furthermore, it needs to take the effect of proton skins into account when we determine the size of neutron skins by comparing transport mode predictions of hard photons with the corresponding experimental measurements.

190 ≤ A ≤ 219↗
DOE OSTI2019

Skin and Proximity Effects in Electrodes and Furnace Shells

A review of two-dimensional (2D) analytical models of skin and proximity effects in large industrial furnaces with three electrodes arranged in an equilateral triangle is given. The models cover three different cases: one electrode only, three electrodes where two are approximated by line currents, and induced shell currents where all electrodes are approximated by line currents. The first two models show how the skin and proximity effects depend on electrode material properties and size, and the distance between the electrodes. The third model shows how the strength of the induced shell currents will depend on electrode position and furnace size. These models are compared to numerical studies including distributed electrodes and shell currents. The analytical models are accurate when induced shell currents can be disregarded. However, strong shell currents may have a significant impact on the current distribution within the electrodes. This electrode-shell proximity effect competes with the electrode-electrode proximity effect. Finally, the 2D models have been compared with three-dimensional (3D) case studies of large industrial furnaces. In 3D, the shell currents are significantly smaller than what are predicted by the 2D models, but they are sufficiently strong to cause a significant correction of the electrode current density.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A device for volatile organic compound (VOC) analysis from skin using heated dynamic headspace sampling

Abstract Human skin is an important source of volatile organic compounds (VOCs) offering noninvasive methods to gain clinical metabolite information. This work was focused on the development of a skin sampling device based on a dynamic headspace sampling method with the addition of temperature to increase VOC metabolite recovery. The device preconcentrates skin VOC emissions onto a sorbent substrate, which can either be preserved for offline analysis or attached to a real time sensor downstream. In this work, skin VOC samples were analyzed offline using thermal desorption-gas chromatography-mass spectrometry. A list of 10 common skin VOCs was pre-selected to optimize parameters of sampling time, sampling temperature, and sorbent selection. Overall, this study highlights an effective skin VOC sampling technology with a heating dimension (40 °C, rather than 30 °C or no heating) with a sampling time of 15 min (rather than 5 or 30 mins) and onto Tenax TA sorbent (rather than PDMS), which collectively increases the recovery of compounds with lower vapor pressure and decreases the observed variability in skin VOC measurements. Finally, a list of 79 skin VOC compounds were detected and identified within a cohort of 20 young, healthy volunteers.

Biochemistry & Molecular Biology↗
DOE OSTI2021

Skin factor and potential formation damage from chemical and mechanical processes in a naturally fractured carbonate aquifer with implications to CO 2 sequestration

Here, in this study, we investigate formation damage due to acidization and water injection tests into the naturally fractured carbonate Middle Duperow Formation at Kevin Dome, Montana, potentially diminishing the chance of a future successful Geological Carbon Sequestration (GCS) project. Multiple well-test analytical models, correlated with core description and lithology data, are used to determine flow behavior and communication between the water injection interval and surrounding formations. An improved three-dimensional (3D) geologic model with dual-continuum matrix and fracture properties is constructed based on most recent seismic, core, and water sample measurements. Brine injection is simulated to verify the interpretation from the analytical models, followed by CO 2 injection simulation. Geochemical calculations are performed to understand the in-situ processes that led to formation damage. Our findings suggest: (1) there are two possible scenarios that could lead to a positive total effective skin factor and permeability decline: partial penetration and formation damage; (2) analytical models indicate a positive total skin factor, contradicting results of a previous study suggesting that the well was mildly stimulated; (3) numerical simulation supports the formation damage hypothesis by matching the pressure buildup observed during the latter two brine injection tests; (4) several mechanical and chemical processes may have occurred during injection to clog the matrix/fracture system: anhydrite fines migration and/or calcite precipitation. We then make preventative suggestions for future GCS projects into carbonate reservoirs and remediation recommendations for GCS operation at the Kevin Dome.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

High‐Performance Rechargeable Lithium‐Chlorine Batteries with ALD Conformal Starburst Porous Graphene Positive Electrodes

Abstract Rechargeable alkali metal‐chlorine batteries are emerging as a promising high‐energy‐density solution. However, they confront significant challenges, including the primary issue stemming from the weak binding affinity of cathode materials for Cl 2 , which leads to a sluggish and inadequate supply of Cl 2 during the redox reactions, resulting in a shortened cycle life and low Coulombic efficiency (CE), particularly when operating at ultrahigh specific capacity outputs. Herein, an Al 2 O 3 ‐skinned heterostructured starburst porous graphene with conformal metasurfaces (Al 2 O 3 @rGO) is reported, crafted from a hierarchical porous starburst graphene arranged in a unique layered structure by the PTFE microemulsion skin effect, leveraging subsequent fluidized bed atomic layer deposition (FBALD) of Al 2 O 3 groups. Al 2 O 3 @rGO features superhydrophilicity, effective adsorption, fast kinetics from stable dynamic respiratory interface, high electrical and thermal conductivity anisotropy, intelligent thermal management and safe operation over a wide temperature range. Consequently, the Li‐Cl 2 @Al 2 O 3 @rGO battery achieves an ultrahigh discharge specific capacity of 5000 mAh g −1 at ≈100% CE, and even delivers stable cycling over 200 cycles with 2000 mAh g −1 at an average CE of 99.8% under low temperature environment of ‐40 °C. The scalable heterostructure approach offers a sustainable perspective of the development of functionalized metamaterials and metasurfaces for next‐generation safe and energy‐dense batteries and broader applications.

Chemistry↗
DOE OSTI2022

Curving the space by non-Hermiticity

Quantum systems are often classified into Hermitian and non-Hermitian ones. Extraordinary non-Hermitian phenomena, ranging from the non-Hermitian skin effect to the supersensitivity to boundary conditions, have been widely explored. Whereas these intriguing phenomena have been considered peculiar to non-Hermitian systems, we show that they can be naturally explained by a duality between non-Hermitian models in flat spaces and their counterparts, which could be Hermitian, in curved spaces. For instance, prototypical one-dimensional (1D) chains with uniform chiral tunnelings are equivalent to their duals in two-dimensional (2D) hyperbolic spaces with or without magnetic fields, and non-uniform tunnelings could further tailor local curvatures. Such a duality unfolds deep geometric roots of non-Hermitian phenomena, delivers an unprecedented routine connecting Hermitian and non-Hermitian physics, and gives rise to a theoretical perspective reformulating our understandings of curvatures and distance. In practice, it provides experimentalists with a powerful two-fold application, using non-Hermiticity to engineer curvatures or implementing synthetic curved spaces to explore non-Hermitian quantum physics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Simulation of an inductively coupled plasma with a two-dimensional Darwin particle-in-cell code

A two-dimensional particle-in-cell code for the simulation of low-frequency electromagnetic processes in laboratory plasmas has been developed. The code uses the Darwin method omitting the electromagnetic wave propagation. The Darwin method separates the electric field into solenoidal and irrotational parts. The solenoidal electric field is calculated with a new algorithm based on the equation for the electric field vorticity. The system of linear equations in the new algorithm is readily solved using a standard iterative method. The irrotational electric field is the electrostatic field calculated with the direct implicit algorithm. The code is verified by reproducing the two-stream instability, electron electromagnetic waves, and shear Alfvén waves. The code is applied to simulate an inductively coupled plasma with the driving current flowing around the plasma region. In this simulation, a ring of dense plasma forms at the initial stage but then the density becomes maximal in the center and decays monotonically toward the walls. The skin effect is in the transitional mode between local and non-local, and the electron velocity distribution function is non-Maxwellian.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Building confidence in models for complex barrier systems for radionuclides

The modeling and simulation of the Cement-clay Interaction-Diffusion field (CI-D) experiment at the Mont Terri site in Switzerland presented here demonstrates that it is possible to capture the multiscale physical and chemical features of natural and engineered barrier systems for radionuclides. The simulations are successfully carried out with the newly developed CrunchODiTi high-performance computing software that accounts for multiple continua, including a continuum representing the electrical double layer (EDL) developed along negatively charged clay particles in clay rock. The simulation also accounts for both the complex three-dimensional (3D) geometry, expected as the norm in a geological waste repository, and the anisotropy of the geological formation. In addition, the high resolution of the model makes it possible to include "skin effects" developed at the interface between highly reactive materials, in this case between the high pH cement and the circumneutral but electrostatic Opalinus Clay. The successful history matching with the field experiment demonstrates that the distinct geochemical and physical properties of the cement and the Opalinus Clay in the CI-D experiment can be accounted for. Such analyses are essential for developing a defensible safety case for the underground storage of radioactive waste.

Sarsenbayev, Dauren↗
DOE OSTI2024

Engineering a non-Hermitian second-order topological insulator state in quasicrystals

Non-Hermitian topological phases have gained immense attention due to their potential to unlock novel features beyond Hermitian bounds. PT -symmetric (parity time-reversal symmetric) non-Hermitian models have been studied extensively over the past decade. In recent years, the topological properties of general non-Hermitian models, regardless of the balance between gains and losses, have also attracted vast attention. Here, we propose a non-Hermitian second-order topological (SOT) insulator that hosts gapless corner states on a two-dimensional quasicrystalline lattice (QL). We first construct a non-Hermitian extension of the Bernevig-Hughes-Zhang model on a QL generated by the Amman-Beenker tiling. This model has real spectra and supports helical edge states. Corner states emerge by adding a proper Wilson-mass term that gaps out the edge states. We propose two variations of the mass term that result in fascinating characteristics. In the first variation, we obtain a purely real spectra for the second-order topological phase. In the latter, we get a complex spectra with corner states localized at only two corners due to the higher-order non-Hermitian skin effect of the edge modes. Furthermore, our findings pave a path to engineering exotic SOT phases where corner states can be localized at designated corners.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Giant Nonreciprocity and Gyration through Modulation-Induced Hatano-Nelson Coupling in Integrated Photonics

Asymmetric energy exchange interactions, also known as Hatano-Nelson type couplings, enable the study of non-Hermitian physics and associated phenomena like the non-Hermitian skin effect and exceptional points (EPs). Since these interactions are by definition nonreciprocal, there have been very few options for implementations in integrated photonics. Here, in this work, we show that asymmetric couplings are readily achievable in integrated photonic systems through time-domain dynamic modulation. We experimentally study this concept using a two-resonator photonic molecule produced in a lithium niobate on insulator platform that is electro-optically modulated by rf stimuli. We demonstrate the dynamic tuning of the Hatano-Nelson coupling between the resonators, surpassing the asymmetry that has been achieved in previous work, to reach an EP for the first time. We are additionally able to flip the relative sign of the couplings for opposite directions by going past the EP. Using this capability, we show that the through-chain transport can be configured to exhibit both giant (~60 dB) optical contrast as well as photonic gyration or nonreciprocal π phase contrast.

42 ENGINEERING↗