Search NASA⌕ Search

SEARCH · Search NASA

Results for “sodium anodes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Excellent cycling stability of sodium anode enabled by a stable solid electrolyte interphase formed in ether-based electrolytes

Sodium (Na)-ion batteries have been considered as one of the most promising power sources beyond Li-ion batteries. Although Na metal anode exhibits a high theoretical capacity of 1165 mAh g-1, its application on Na batteries is largely hindered by dendrite growth and low Coulombic efficiency. Herein, we demonstrate that an electrolyte consists of 1 M sodium tetrafluoroborate in Tetraglyme can enable excellent cycling efficiency (99.9 %) of Na metal anode for more than 1000 cycles. This high reversibility of Na anode can be attributed to a stable solid electrolyte interphase formed on Na surface as revealed by cryogenic transmission electron microscopy and X-ray photoelectron spectroscopy. These electrolytes also enabled excellent cycling stability of Na||hard carbon cells and Na||Na2/3Co1/3Mn2/3O2 cells at high rate with very high coulombic efficiencies.

sodium metal, TEGDME, solid electrolyte interphase↗

A layered nonstoichiometric lepidocrocite-type sodium titanate anode material for sodium-ion batteries

A lepidocrocite-structured sodium titanate prepared by ion-exchange of a Cs-containing precursor shows promise as an anode material for sodium ion batteries, with a discharge capacity of up to 229 mAh g -1 at an average potential of about 0.6 V vs. Na + /Na. Titanium vacancies in the metal oxide layers provide additional sites for sodium intercalation in addition to interlayer sites, which accounts for the higher capacity compared to other previously reported lepidocrocite-structured titanates. By screening a series of electrolyte formulations and binders, we were able to improve the first-cycle coulombic efficiency to 81.8% and 94.7% respectively using CMC/SBR-based and binder-free electrodes in ether electrolytes. Finally, the electrochemical consequences of short-term air-exposure on the electrodes are also discussed.

25 ENERGY STORAGE↗

A Reductively Stable Electrolyte Realizes Deep Cycling Behavior in Anode‐free Sodium Batteries

For anode‐free sodium batteries to achieve practical consideration, highly reversible chemistries require exceptional ≥99.95% coulombic efficiencies that maintain over prolonged cycling periods. To do so, consumption of this severely limited sodium inventory must be restricted while metal nucleation processes that comprise the in situ formed metal anode are improved. Herein, we describe a fluorine‐free carborane electrolyte that satisfies these criteria by emphasizing reductive stability and weakly coordinating anion behavior as design principles. We find this approach promotes the development of a thin, robust SEI chemistry rich in both organic speciation and boron. The electrolyte described herein exhibits ideal metal nucleation behavior on one‐micron thin carbonaceous current collector surfaces and achieves a metal deposition/stripping efficiency near parity for 400 cycles. This novel anode chemistry is introduced to anode‐free full cell configurations where 87% of the initial discharge capacity is retained after 1000 cycles at 2.0 C. In conclusion, post‐test characterization of deep‐cycled anode‐free cells reveals suppressed capacity fade in these systems is attributed to the chemical stability of the carborane anion.

anode-free↗

Lithium‐Containing Hybrid SEI Layer Enabling High Mass Loading and Anode‐Less Sodium Metal Batteries

The continuous rupturing and rebuilding of unstable solid electrolyte interphase (SEI) layer during cycling would block Na + diffusion and induce Na dendrite formation, ultimately limiting the practical application of high-energy-density sodium metal batteries. Herein, a hybrid SEI layer containing Li-species is dexterously constructed on the surface of sodium metal anode. Li-containing inorganic components (Li 3 N, LiF, and Li 2 CO 3 ) are introduced to stabilize the Na/electrolyte interface and enhance the mechanical and diffusion kinetic properties of the SEI layer, which can reduce the side reactions and gas generation, regulate Na + flux during cycling and promote rapid Na + migration for uniform dendrite-free Na deposition. As a result, the constructed Na symmetric cells achieve low overpotential and long cycle life of 5900, 1800, and 500 h at current densities of 3, 10, and 30 mA cm −2 , respectively. Furthermore, the full cells paired with the Na₃V₂(PO₄)₃ cathode demonstrate high specific capacity and excellent cycle stability, even at an ultra-high cathode loading of 39.3 mg cm −2 and a low N/P ratio (negative/positive electrode capacity ratio of 1.21).

Diffusion kinetic↗

Tracking Sodium-Antimonide Phase Transformations in Sodium-Ion Anodes: Insights from Operando Pair Distribution Function Analysis and Solid-State NMR Spectroscopy

Operando pair distribution function (PDF) analysis and ex situ Na-23 magic-angle spinning solid-state nuclear magnetic resonance (MAS ssNMR) spectroscopy are used to gain insight into the alloying mechanism of high-capacity antimony anodes for sodium-ion batteries. Subtraction of the PDF of crystalline NaxSb phases from the total PDF, an approach constrained by chemical phase information gained from Na-23 ssNMR in reference to relevant model compounds, identifies two previously uncharacterized intermediate species formed electro-chemically; a-Na3-xSb (x approximate to 0.4-0.5), a structure locally similar to crystalline Na3Sb (c-Na3Sb) but with significant numbers of sodium vacancies and a limited correlation length, and a-Na1.7Sb, a highly amorphous structure featuring some Sb-Sb bonding. The first sodiation breaks down the crystalline antimony to form first a-Na3-xSb and, finally, crystalline Na3Sb. Desodiation results in the formation of an electrode formed of a composite of crystalline and amorphous antimony networks. We link the different reactivity of these networks to a series of sequential sodiation reactions manifesting as a cascade of processes observed in the electrochemical profile of subsequent cycles. The amorphofis network reacts at higher voltages reforming a-Na1.7Sb, then a-Na3-xSb, whereas lower potentials are required for the sodiation of crystalline antimony, which reacts to form a-Na3-xSb without the formation of a-Na3-xSb. a-Na3-xSb is converted to crystalline Na3Sb at the end of the second discharge. We find no evidence of formation of NaSb. Variable temperature Na-23 NMR experiments reveal significant sodium mobility within c-Na3Sb; this is a possible contributing factor to the excellent rate performance of Sb anodes.

Allan, Phoebe K.↗

Metallic Cu Surface Enables Reversible Na Metal Anodes and Stabilizes Anode-Free Sodium Metal Batteries

Anode free Na metal batteries are promising for future energy storage because they not only provide the highest energy densities but also eliminate the need of handling hazardous Na metals during battery manufacturing. However, they suffer from much faster degradation due to strong sensitivities even to trace levels of side reactions. In view of the crucial roles of surface chemistry on modulating electrochemical plating, this work systematically investigated a series of Cu surfaces for Na plating and stripping in the 1.0 M NaPF 6 diglyme electrolyte. Our results suggest that Na plating and stripping on pure Cu surface without Cu oxide species exhibits much better reversibility and smaller overpotentials across a wide range of current densities, especially for the first plating/stripping cycle. The high performance includes consistently higher than 99.8% Faradaic efficiencies, much more stable interfacial resistance, and negligible formation of mossy Na after 500 cycles. This improved performance can be explained based on the stronger Na-Cu affinity compared with the Na-CuO affinity. Anode-free Na metal batteries equipped with high-capacity sodium vanadium phosphate cathodes and pure Cu current collector exhibited at least 70% capacity retention for 100 cycles.

Electrochemistry↗

Lithium‐Containing Hybrid SEI Layer Enabling High Mass Loading and Anode‐Less Sodium Metal Batteries

Abstract The continuous rupturing and rebuilding of unstable solid electrolyte interphase (SEI) layer during cycling would block Na + diffusion and induce Na dendrite formation, ultimately limiting the practical application of high‐energy‐density sodium metal batteries. Herein, a hybrid SEI layer containing Li‐species is dexterously constructed on the surface of sodium metal anode. Li‐containing inorganic components (Li 3 N, LiF, and Li 2 CO 3 ) are introduced to stabilize the Na/electrolyte interface and enhance the mechanical and diffusion kinetic properties of the SEI layer, which can reduce the side reactions and gas generation, regulate Na + flux during cycling and promote rapid Na + migration for uniform dendrite‐free Na deposition. As a result, the constructed Na symmetric cells achieve low overpotential and long cycle life of 5900, 1800, and 500 h at current densities of 3, 10, and 30 mA cm −2 , respectively. Furthermore, the full cells paired with the Na₃V₂(PO₄)₃ cathode demonstrate high specific capacity and excellent cycle stability, even at an ultra‐high cathode loading of 39.3 mg cm −2 and a low N/P ratio (negative/positive electrode capacity ratio of 1.21).

Xia, Li [State Key Laboratory of Physical Chemistr↗

Predictions of particle size and lattice diffusion pathway requirements for sodium-ion anodes using eta-Cu6Sn5 thin films as a model system

Geometrically well-defined Cu6Sn5 thin films were used as model systems to estimate the diffusion depth and diffusion pathway requirements of Li and Na ions in alloy anodes. eta-Cu6Sn5 anodes have an initial reversible capacity towards Li of 545 mAh g-1 (Li3.96Sn or 19.8 Li/Cu6Sn5) and a very low initial irreversible capacity of 1.6 Li/Cu6Sn5. In contrast, the reaction with Na is limited with a reversible capacity of 160 mAh g-1 compared to the expected 516 mAh g-1. The potential profile is analogous to that of pure Sn with an average potential of 0.3 V. X-ray diffraction and 119Sn-M ssbauer measurements show that this limited capacity is likely resulting from the limited diffusion of Na into the anode particles not the formation of a low Na-content phase. This is substantiated by the analysis of the structure of eta-Cu6Sn5 which revealed zig-zag and tunnel diffusion pathways with spherical voids with a diameter very close to that of Na+. Moreover, our results also indicate that an alloy of eta-Cu6Sn5 should have optimized particle sizes of about 10 nm in diameter to increase the Na-capacity significantly. An alternative system consisting of a mixture of Cu6Sn5 and Sn of nominal composition Cu6Sn10 has been studied as possible Na-ion anode material possessing higher storage capacity than pure Cu6Sn5. Indeed this mixture of phase delivers a larger initial reversible storage capacity up to 400 mAh g-1. Finally, we have evidenced that the presence of Cu in Cu6Sn5 and in Cu6Sn10 suppresses the anomalous electrolyte decomposition normally measured for pure Sn at 1.2 V during discharge.

119Sn M ssbauer spectroscopy↗

Tailoring the structure and electrochemical performance of sodium titanate anodes by post-synthesis heating

Sodium titanate anodes synthesized via “chimie-douce” methods generally require a post-synthesis dehydration step. Their crystal structures are sensitive to the heating conditions such as temperature, resulting in distinct sodium storage performance. Herein, using in situ and ex situ high-temperature X-ray diffraction, we studied in detail the structural changes of Na 0.74 Ti 1.815 $\square$ 0.185 O 4 ·1.27H 2 O (NTO) under various heating conditions. Electrochemical characterization revealed that NTOs heated at lower temperatures with layered structures deliver larger capacities than those heated at high temperatures with tunnel structures. Heat treatment at moderate temperatures greatly improves the capacity retention of NTO, especially stabilizing the high voltage processes that are major contributors to the capacity fading, because of the modified crystal structure and surface chemistry. As a result, our findings suggest that post-synthesis heating is a simple and effective strategy to tailor the crystal structure, surface chemistry, and electrochemical properties of sodium titanate anodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tin asymmetric membranes for high capacity sodium ion battery anodes

Sodium-ion batteries have attracted tremendous research attention as promising candidates for next generation energy storage systems due to low-cost and high abundancy. Furthermore, comparing to current Li-ion battery technology, limitations on the anode side seriously hinder the cell performance since sodium does not easily intercalate into graphite materials. Here, tin nanoparticles embedded in various asymmetric membrane structures were developed to leverage the high capacity of tin (847 mA h g -1 based on Na 15 Sn 4 ) and accommodate the significant volume expansion for long cycle life. It was demonstrated 762 mA h g -1 reversible capacity at 50 mA g -1 and stable cycling performance over 100 cycles with 92.1% capacity retention at 100 mA g -1 can be achieved for the tin asymmetric membrane electrode synthesized using polysulfone and tin tert-butoxide precursor.

25 ENERGY STORAGE↗

Electrochemical Properties and Challenges of Type II Silicon Clathrate Anode in Sodium Ion Batteries

The development of advanced anodes for low-cost room temperature sodium-ion batteries (SIBs) with high cycling stability is of great significance. Silicon clathrates are promising intercalation anodes due to their cage-like frameworks. It is predicted that the open cages can easily accommodate alkali ions with negligible volume changes. However, the complicated surface structure and chemical reactions make it challenging to understand the electrochemical performance of clathrate anodes in SIBs. In this paper, we evaluated the performance of type II clathrate anodes in SIBs. A slightly elevated testing temperature (45 degrees C) is shown to improve the cell capacity and rate performance due to the improved ionic conductivity. However, side reactions on the solid electrolyte interface (SEI) and loss of active material during the first sodiation process contribute to the low Coulombic efficiency during the first cycle. Analysis is supported by electrode morphology, elemental mapping, and X-ray photoelectron spectroscopy (XPS) on the clathrate electrodes at different electrochemical states. Na+ ion transport behavior between clathrate cages and surface in terms of migration barriers was also computed to explain the positive effect of higher cell testing temperature, and the low Coulombic efficiency of the first cycle.

25 ENERGY STORAGE↗

Interdependence of Support Wettability - Electrodeposition Rate- Sodium Metal Anode and SEI Microstructure

Here, this study examines how current collector support chemistry (sodiophilic intermetallic Na 2 Te vs. sodiophobic baseline Cu) and electrodeposition rate affect microstructure of sodium metal and its solid electrolyte interphase (SEI). Capacity and current (6 mAh cm -2 , 0.5–3 mA cm -2 ) representative of commercially relevant mass loading in anode-free sodium metal battery (AF-SMBs) are analyzed. Synchrotron X-ray nanotomography and grazing-incidence wide-angle X-ray scattering (GIWAXS) are combined with cryogenic ion beam (cryo-FIB) microscopy. Highlighted are major differences in film morphology, internal porosity, and crystallographic preferred orientation e.g. (110) vs. (100) and (211) with support and deposition rate. Within the SEI, sodium fluoride (NaF) is more prevalent with Te-Cu versus sodium hydride (NaH) and sodium hydroxide (NaOH) with baseline Cu. Due to competitive grain growth the preferred orientation of sodium crystallites depends on film thickness. Mesoscale modeling delineates the role of SEI (ionic conductivity, morphology) on electrodeposit growth and onset of electrochemical instability.

36 MATERIALS SCIENCE↗

Next generation molten NaI batteries for grid scale energy storage

Robust, safe, and reliable grid-scale energy storage continues to be a priority for improved energy surety, expanded integration of renewable energy, and greater system agility required to meet modern dynamic and evolving electrical energy demands. We describe here a new sodium-based battery based on a molten sodium anode, a sodium iodide/aluminum chloride (NaI/AlCl 3 ) cathode, and a high conductivity NaSICON (Na 1+x Zr 2 Si x P 3–x O 12 ) ceramic separator. This NaI battery operates at intermediate temperatures (120–180 °C) and boasts an energy density of >150 Wh kg –1 . The energy-dense NaI-AlCl 3 ionic liquid catholyte avoids lifetime-limiting plating and intercalation reactions, and the use of earth-abundant elements minimizes materials costs and eliminates economic uncertainties associated with lithium metal. Moreover, the inherent safety of this system under internal mechanical failure is characterized by negligible heat or gas production and benign reaction products (Al, NaCl). Scalability in design is exemplified through evolution from 0.85 to 10 Ah (28 Wh) form factors, displaying lifetime average Coulombic efficiencies of 99.45% and energy efficiencies of 81.96% over dynamic testing lasting >3000 h. Here, this demonstration promises a safe, cost-effective, and long-lifetime technology as an attractive candidate for grid scale storage.

25 ENERGY STORAGE↗

A Carboranyl Electrolyte Enabling Highly Reversible Sodium Metal Anodes via a “Fluorine-Free” SEI

Realization of practical sodium metal batteries (SMBs) is hindered due to lack of compatible electrolyte components, dendrite propagation, and poor understanding of anodic interphasial chemistries. Chemically robust liquid electrolytes that facilitate both favorable sodium metal deposition and a stable solid-electrolyte interphase (SEI) are ideal to enable sodium metal and anode-free cells. Herein we present advanced characterization of a novel fluorine-free electrolyte utilizing the [HCB 11 H 11 ] 1- anion. Symmetrical Na cells operated with this electrolyte exhibit a remarkably low overpotential of 0.032 V at a current density of 2.0 mA cm -2 and a high coulombic efficiency of 99.5 % in half-cell configurations. Additionally, surface characterization of electrodes post-operation reveals the absence of dendritic sodium nucleation and a surprisingly stable fluorine-free SEI. Furthermore, weak ion-pairing is identified as key towards the successful development of fluorine-free sodium electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Carboranyl Electrolyte Enabling Highly Reversible Sodium Metal Anodes via a “Fluorine‐Free” SEI

Abstract Realization of practical sodium metal batteries (SMBs) is hindered due to lack of compatible electrolyte components, dendrite propagation, and poor understanding of anodic interphasial chemistries. Chemically robust liquid electrolytes that facilitate both favorable sodium metal deposition and a stable solid‐electrolyte interphase (SEI) are ideal to enable sodium metal and anode‐free cells. Herein we present advanced characterization of a novel fluorine‐free electrolyte utilizing the [HCB 11 H 11 ] 1− anion. Symmetrical Na cells operated with this electrolyte exhibit a remarkably low overpotential of 0.032 V at a current density of 2.0 mA cm −2 and a high coulombic efficiency of 99.5 % in half‐cell configurations. Surface characterization of electrodes post‐operation reveals the absence of dendritic sodium nucleation and a surprisingly stable fluorine‐free SEI. Furthermore, weak ion‐pairing is identified as key towards the successful development of fluorine‐free sodium electrolytes.

Tomich, Anton W.↗