Search NASA⌕ Search

SEARCH · Search NASA

Results for “solid carbon products”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Comparison of Approaches for CO 2 Sequestration as Solid Carbon Products

The growing global climate crisis linked to the rising atmospheric CO 2 levels calls for urgent and innovative solutions. Fixing CO 2 as valuable solid carbon products, such as carbon nanofibers or nanotubes (CNFs or CNTs), offers a promising way to potentially achieve net-negative CO 2 emissions. However, direct CO 2 -to-solid carbon faces significant thermodynamic and kinetic constraints, especially under mild reaction conditions. This mini-review compares three emerging approaches for CO 2 conversion into solid carbon: 1) using molten salt at high temperatures to produce CNFs or CNTs, 2) converting CO 2 to amorphous carbon with pyrophoric liquid metals at near room temperature, and 3) employing an electrocatalytic-thermocatalytic tandem process to produce CNFs at relatively mild temperatures. We examine the underlying principles, thermodynamic driving forces, and recent advances of each approach, and discuss the challenges and opportunities in catalyst development, reactor design, and energy management. We aim to highlight CO 2 fixation, facilitate net-negative CO 2 emissions, and stimulate more innovations for both environmental and economic benefits.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2020

Hydrogen and Solid Carbon Products from Natural Gas: A Review of Process Requirements, Current Technologies, Market Analysis, and Preliminary Techno Economic Assessment

In this paper, we review relevant technologies—primarily thermochemical and plasma conversion processes—that use natural gas to produce solid carbon and hydrogen, and recent research progress and commercial activities. Technical challenges include the high energetic requirements necessary for methane activation and, for some catalytic processes, the separation of solid carbon product from the spent catalyst. We assess current and new carbon product markets that could be served given technological advances, and we discuss technical barriers and potential areas of research to address these needs. We provide preliminary economic analysis where it was concluded that the cost of pyrolytically produced CO2-free hydrogen can be potentially reduced to <$4/kg target levels with the co-production and sale of sufficiently high-value carbon products.

Dagle, Robert A.↗
DOE OSTI2022

Market Analysis: Upcycling Natural Gas Into Solid Carbon Products

The purpose of this report is to execute a market analysis to determine the potential market opportunities for natural gas-derived high-value carbon products and their associated applications. Currently, associated gas is released through the process of either venting or flaring. Vented or flared natural gas is presently lost to the atmosphere, despite the fact that it represents a significant resource of both carbon and hydrogen—two products that could have significant value. Transforming some of this underutilized supply into high-cost products could contribute to realizing the full value of United States (U.S.) natural gas resources. The products analyzed in this report are carbon fiber, carbon nanotubes, synthetic graphite, and carbon black. The report also touches on the market opportunities for hydrogen, a by-product of the pyrolysis process.

03 NATURAL GAS↗
DOE OSTI2022

Progress on Natural Gas Pyrolysis for Low-Carbon H2 Production

This presentation summarizes the on-going work in NETL's new Natural Gas Decarbonization and H2 Technologies on Pyrolysis. It includes highlights on a modular pyrolysis based process producing H2 and solid carbons, a report documenting market size, drivers, customers for solid carbon products, and new work assessing H2 pyrolysis technologies for large scale H2 production.

Haynes, Daniel↗
DOE OSTI2022

Radiocarbon analysis as a method for verifying atmospheric CO 2 uptake during carbon mineralization

Sequestration of atmospheric CO 2 is required to constrain the warming of Earth’s climate. Carbon mineralization refers to the precipitation of carbonate minerals by reaction of CO 2 and Mg- and Ca-rich rocks; if the source of the CO 2 is atmospheric and the precipitated carbonate is protected from subsequent dissolution, this process at sufficient scale may be able to reliably draw down atmospheric greenhouse gas levels. Such reactions occur passively in ultramafic settings and previous work has demonstrated that they actively draw down local CO 2 (g) concentrations. However, a method for unambiguously attributing the sequestered carbon solid product to atmospheric sources is still lacking. Here, we test if radiocarbon can be used to verify that the carbon being incorporated into carbonate minerals during carbon mineralization is atmospheric in origin. Additionally, samples from recently exposed ultramafic sites are analyzed and the results demonstrate the utility of this technique for verifying true atmospheric carbon reduction.

58 GEOSCIENCES↗
DOE OSTI2024

CO 2 fixation into carbon nanofibres using electrochemical–thermochemical tandem catalysis

Carbon dioxide (CO 2 ) fixation into value-added solid carbon such as carbon nanofibres (CNF) for longer-term storage represents a promising avenue for achieving net-negative carbon emissions. However, directly converting CO 2 to CNF via thermocatalytic approaches faces thermodynamic constraints, while electrocatalytic methods typically lead to amorphous carbon with limited yields or require energy-intensive conditions (>720 °C). Here, we present an electrocatalytic-thermocatalytic tandem strategy for CNF production, which circumvents the aforementioned thermodynamic limitations by integrating the co-electrolysis of CO 2 and water into syngas (CO and H 2 ) with a subsequent thermochemical process at relatively mild conditions (370-450 °C, 1 atm), yielding CNF at a high production rate (average 2.5 g carbon g metals -1 h -1 ). Further, the optimal coordinated actions of FeCo alloy and extra metallic Co were ascertained to enhance the dissociative activation of syngas and favour the carbon-carbon bond formation to produce CNF. This tandem strategy opens a door to leverage renewable energy for decarbonizing CO 2 into valuable solid carbon products while producing renewable H 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Biogas sequestration to carbon nanofibers via tandem catalytic strategies

Upgrading decentralized biogas represents a sustainable route to produce valuable products while mitigating two potent greenhouse gases, namely, methane (CH 4 ) and carbon dioxide (CO 2 ). Conventional dry reforming of CH 4 with CO 2 yields syngas with low H 2 /CO ratios (≤1) and requires high temperatures (>800 °C) to overcome equilibrium constraints and abate coke deposition, which limits commercial implementation. Here we demonstrate the conversion of biogas into value-added carbon nanofibers via reaction integration in tandem reactors, while reducing the reaction temperature, shifting equilibrium limits and yielding H 2 -enriched syngas (H 2 /CO = 2–3) as a byproduct. Experimental and theoretical insights reveal that potassium (K) modification enhances carbon nanofiber formation due to synergistic effects via a balanced interplay between KO x -induced cobalt facets and cobalt carbide species. In conclusion, the energy cost and CO 2 footprint analyses highlight the potential advantages of tandem processes for the sustainable upgrading of biogas into valuable solid carbon products.

09 BIOMASS FUELS↗
DOE OSTI2022

Effects of temperature and time on supercritical methanol Co-Liquefaction of rice straw and linear low-density polyethylene wastes

We report that biofuels are particularly attractive and play an increasingly important role in sustainable energy. However, biofuels originating from lignocellulosic biomass (LCB) are extremely challenging because of their low carbon content, low stability, and high oxygen content. This work evaluates the supercritical methanol (scMeOH) co-liquefaction of rice straw and linear low-density polyethylene (LLDPE) at temperature range of 240-340 °C for 0-2 h, to obtain hydrocarbons (HCs)-rich oil and carbon-rich solid product. Results show that reaction temperature dominated the yield and properties of products, but not the holding time. Among parameters tested, 30.07 wt% oil yield with 75.79% HCs content and 33.05 wt% oil yield with 70.91% HCs content were obtained at 300 °C for 1 h and 1.5 h, respectively. Simultaneously, the remaining solid products were still as high as 53.85 wt% with a carbon content of 79.59% and 48.28 wt% with carbon content of 81.34% under 300 °C for 1 h and 1.5 h, respectively. Ultimate analysis, FT-IR, TGA, and SEM show that solid products could be used as sustainable carbon resources, and solid fuel rather than soil amendment because of risk of micro plastic or adsorbent due to smooth surface without pores.

09 BIOMASS FUELS↗
DOE OSTI2022

Methane Pyrolysis for CO2-free H2 and Carbon Nanomaterials (Abstract)

We propose to continue to develop a new process for producing CO2-free hydrogen (H2) from inexpensive and domestically-abundant natural gas (NG), while simultaneously reducing H2’s net production cost to $1.0/kg through the sale of valuable crystalline solid carbon co-product. Producing clean hydrogen at this price is a DOE Hydrogen Energy Earthshot goal. Cost effective production of clean H2 is also of commercial relevance to project partners Southern California Gas Company (SoCalGas) and startup company C4-MCP, who aim to further develop, demonstrate at scale, and ultimately deploy the new process technology developed on this project in order to meet regulatory demands in the State of California. In the current project we have focused on i) understanding the catalyst science for thermocatalytic decomposition of methane (TCD), which resulted in the development of a patent pending bimetallic catalyst offering favorable activity, stability, and selectivity under industrially relevant process conditions, ii) developing a novel, patent pending process to enable the separation of produced carbon and catalyst, and re-synthesis of the catalyst using recycled materials, iii) performing limited characterization of the produced carbon materials, and iv) performing detailed process modeling in order to perform techno economic assessment. The additional scope proposed here will accelerate the commercial deployment of TCD for CO2-free H2 and valuable solid carbon nanotubes (CNT) co-product, by i) scaling up the production of CNT co-product using a scalable, fluidized bed reactor (25 g catalyst scale versus the 1 g catalyst scale demonstrated to-date), ii) producing at least 40 g of CNT product, produced via multiple cycles of TCD, carbon-catalyst separation, and catalyst re-synthesis, to enable the production of sufficient quantities of solid carbon so as to explore its market potential, iii) understanding the quality of the co-product CNTs, produced at larger scale, through advanced characterization, and iv) beginning to explore multiple promising high volume carbon product applications (thermoplastics, automotive composites, battery, and cement reinforcement applications).

08 HYDROGEN↗
DOE OSTI2024

Methane Pyrolysis for CO2-free H2 and Carbon Nanomaterials - CRADA 576 (Final Report)

In this CRADA project we continued to develop the Pacific Northwest National Laboratory (PNNL) patent-pending Regenerable Catalytic Pyrolysis (ReCaP) process technology for producing CO 2 -free hydrogen (H 2 ) from inexpensive and domestically-abundant natural gas (NG), while simultaneously reducing H 2 ’s net production cost to $\$$1.0/kg through the sale of valuable crystalline solid carbon co-product. Producing clean hydrogen at this price is a DOE Hydrogen Energy Earthshot goal. This effort builds on our prior catalyst and processing advances made thermocatalytic decomposition of methane (TCD). The additional scope performed here accelerated the commercial deployment of TCD for CO 2 -free H 2 and valuable solid carbon nanotubes (CNT) co-product, by i) scaling up the production of CNT co-product using a fluidized bed reactor (25 g catalyst scale versus the 1 g catalyst scale demonstrated prior), ii) producing approximately 1 kg of CNT byproduct, produced via multiple cycles of TCD, carbon-catalyst separation, and catalyst re-synthesis, to enable the production of sufficient quantities of solid carbon so as to explore its market potential, iii) understanding the quality of the co-product CNTs, produced at larger scale, using advanced characterization, and iv) beginning to explore multiple promising high volume carbon product applications (e.g., aluminum and polymer composites, steel additive, and cement reinforcement applications). We are in discussions with Department of Energy and potential commercial partners to continue funding of this effort with the goal to facilitate eventual commercial deployment.

08 HYDROGEN↗
DOE OSTI2026

Reacting CO 2 with Light Alkanes to Value-Added Products

Catalytic conversion of anthropogenic carbon dioxide (CO 2 ) into value-added products is a promising strategy to mitigate global carbon emissions. Concurrently, the shale gas revolution has provided an abundant supply of light alkanes (methane, ethane, propane, and butane), presenting a unique opportunity to employ these underutilized hydrocarbons as an effective, low-cost hydrogen source for CO 2 reduction. In this Perspective, we summarize past efforts, current state, and future opportunities for reacting CO 2 with light alkanes to generate a diverse range of value-added products. Compared with direct alkane conversion, the introduction of CO 2 fundamentally alters reaction thermodynamics and kinetics, enabling selective C–H and C–C bond activation while suppressing catalyst deactivation from coke formation. Building on decades of research in dry reforming and CO 2 -assisted dehydrogenation, recent advances in catalyst design have enabled CO 2 -assisted dehydrogenation processes that approach chemical equilibrium for the selective production of olefins and syngas. Importantly, advances in catalyst design and reactor engineering have further expanded the product scope beyond gas-phase (syngas and olefins) to include liquid-phase (oxygenates and aromatics), and solid-phase products (carbon nanomaterials). We highlight key catalyst design principles for controlling reaction pathways and discuss major challenges and opportunities in developing selective and versatile platforms for the simultaneous upgrading of CO 2 and light alkanes.

CO2↗
DOE OSTI2021

Structure sensitivity and its effect on methane turnover and carbon co-product selectivity in thermocatalytic decomposition of methane over supported Ni catalysts

We explore how thermocatalytic decomposition of methane (TCD) is a promising approach for producing CO 2 -free hydrogen and solid carbon co-product. In this study, a series of Al 2 O 3 - and MgAl 2 O 4 -based Ni catalysts, prepared with varying synthesis and pretreatment methods, were evaluated for methane TCD performance at 650°C and characterized before and after reaction to elucidate activity-structure relationships. We found that methane TCD turnover increases with Ni particle size. Further, large Ni particle sizes (i.e., >20 nm) are selective toward the formation of carbon nanotubes (CNTs), while small Ni particle sizes (i.e., <10 nm) are selective toward the formation of graphitic carbon layers. The formation of graphitic carbon layers block access to Ni active sites, thus rendering the catalyst inactive more quickly than when CNTs are produced. Additionally, the catalyst deactivation observed with time-on-stream is due to the fragmentation of Ni particles into smaller Ni particles followed by their encapsulation with graphitic carbon layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗