Search NASA⌕ Search

SEARCH · Search NASA

Results for “solution chemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Solution chemistry effects on the stress corrosion cracking behavior of alloy 2090 (Al-Li-Cu) and alloy 2024 (Al-Cu-Mg)

The SCC initiation behavior of alloys 2090 and 2024 is examined in various NaCl-based environments. The pre-exposure and bulk/local solution chemistry effects discovered by Holroyd et al. (1986) are investigated, with emphasis on the effect of bulk solution chemistries and atmospheric CO2 on the occluded cell environment and the role of the occluded environment in the crack initiation and early-stage propagation processes. It was found that constant immersion in NaCl does not promote SCC in alloy 2090 or alloy 2024. Upon removal from NaCl, SCC is quickly facilitated, but only in the presence of atmospheric CO2. The need for CO2 is attributed to an increase in carbonate concentrations, eventually allowing passivation of blunted fissures by precipitation of Li2CO3. It is inferred that any effects due to aging are small in magnitude, relative to the effects of subtle changes in the bulk/local solution chemistries.

Moran, James P.↗
NASA NTRS2019

The Effect of Solution Chemistries and Freezing Temperatures on the Morphology of Cryogenic Opal-A (COA): Implications for Past Climates on Mars

Cryogenic opal-A (COA) is a type of hydrated amorphous silica that forms when silica-rich geothermal fluids erupt sub-aerially and are exposed to air temperatures below 0 °C. As the fluid cools and water-ice forms, the solution increases in ionic strength and reaches saturation of opal-A. This results in the precipitation of opal-A between water ice crystals. Natural COA is found embedded within frozen fluids near hydrothermal sources, and has been shown to preserve signs of biological activity. In this study, two solution chemistries (hydrochloric acid (HCl) and sulfuric acid (H2SO4)) and three freezing temperatures (-20, -80, -196 ºC) were used to synthesize COA in the lab. SEM analyses showed that COA frozen at -20 ºC in HCl solutions produced smooth silica branches similar to what was observed in previous studies. COA precipitated at lower freezing temperatures demonstrated progressively smaller particle sizes and unique morphologies such as halite dendrites within silica, desiccation cracks, and pores. COA made in H2SO4 solutions was more angular and fragmented than COA made in HCl solutions. Particle size also decreased with decreasing freezing temperature. COA textures have implications for terrestrial samples as well as future samples returned from Mars because they can provide information about past climate and fluid chemistry.

J V Hogancamp↗
DOE OSTI2024

Honoring Ken Nash: A Solution Chemistry Extraordinaire, Professor, Mentor, and my Friend

Back when I was a graduate student, Professor Nash told me, “The easy stuff is OK, but don’t be afraid to take on the hard research problems.” Since then, I have embraced this approach to research, and throughout the years, it has emboldened me to not shy away from, or give up on research projects with significant challenges. This is just one example of Ken’s influence on not only me, but the many graduate students who studied under his guidance. This presentation will survey some of the projects I have been involved in at Idaho National Laboratory since leaving Ken’s research group at Washington State University in 2011. It is my hope that his influence shines through.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1998

The Coupling of Solution Chemistry to Plant Nutrient Demand in an on Demand Nutrient Delivery System

The goal of the proposal will be to determine the suitability of the DASI instrument in providing a signal that can be recognized and be utilized as an indicator of plant stress. The method to be utilized for evaluating stress is the presentation of an every increasing level of nutrient deficiency and salinity stress (addition of salt (NACl) or increasing concentration of balanced nutrient) while simultaneously recording spectral reflectance using the DASI instrument and monitoring the traditional processes of gas exchange and nutrient uptake parameters. In this manner, we will be able to directly compare the DASI measurements with known stresses as determined by the traditional gas exchange and nutrient uptake measures of stress. We anticipate that the DASI will provide a sensitive identifier of plant stress; recording signals of the resulting changes in plant metabolism in real time, far before any visible effects of stress could be observed. Thus, there is a potential for very early management intervention to correct a stress condition before damage could develop. The present response time for the observation of visual symptoms of plant stress is considerable and only provides an indication that a stress is present after it has been present for an extended period of time. Thus, the impact of a plant-based life support function will have already been significant. An additional benefit of this research to regenerative life support will be the characterization of a potential recovery scenario from various degrees of stress. The experimental approach to be employed includes the removal of the stress at various points in the stress gradient and the characterization of plant performance and reflectance spectra during recovery from various degrees of stress. Spectral reflectance imaging techniques have been developed and used to measure the biochemical composition of plants and relate these characteristics to the fluxes of biochemical elements within the ecosystem.

Savage, Wayne↗
DOE OSTI2025

Predicting Multicomponent Aqueous Phase Adsorption Equilibria of Organic Acids Using the Generalized Brunauer–Emmett–Teller Isotherm Model

Here, to support process development of adsorptive separation of organic acids, this work presents a thermodynamic modeling methodology to predict multicomponent aqueous phase organic acid adsorption equilibria from single-component adsorption isotherms using the generalized Brunauer–Emmett–Teller isotherm model (gBET). With the organic acid fugacities rigorously accounting for the aqueous phase organic acid solution chemistry and solution nonideality, gBET precisely represents the single-component adsorption isotherms and accurately predicts the binary and ternary mixed-acid adsorption equilibria for the ranges of initial pH (∼3–7), acid concentration (100–400 mmol/L), and temperature (298.15–328.15 K) with less than 10% average absolute relative deviation. In addition, gBET with pH-independent parameters provides insights into the underlying adsorption phenomena, including the adsorbate loadings and compositions in the monolayer and subsequent layers under varying initial pH, temperature, concentration, and composition. The gBET model predictions outperform the predictions from the overloading model and the Ideal Dilute Solution Theory.

09 BIOMASS FUELS↗
NASA NTRSDate not supplied

Acid Alteration of Clay Minerals With Implication for Mars’ Surface Processes

The co-occurrence of phyllosilicates (clays) and sulfate stratigraphies at many locations on Mars are associated with a sharp change in surface conditions from neutral/alkaline pH during the Noachian (4.1-3.7 Ga) which favored the formation of clays to acidic conditions during the Hesperian (3.7-2.9 Ga) which favored the formation of sulfates. Yet, if these two contrasting geosystems were temporarily sequential, it is unknown how the Hesperian acidic conditions altered the previously formed clay units. We performed laboratory batch experiments to fingerprint the diagnostic features produced during interactions of Mars-analog clays and acidic solutions. Two clays, and silicon (IV) oxide, were reacted with solution of either sulfuric acid or filtered natural acid rock drainage (ARD) in plastic bottles. The solutions were adjusted at four pH values (1, 3, 5, and 7) and reacted at 4, 30, and 80°C for 3, 7, and 14 days. At the end of the experiments, the filtered supernatants were analyzed by ICP-MS while the solids were characterized by X-Ray Diffraction; Energy-Dispersive X-Ray Fluorescence analyses; Raman and Short-Wave Infrared spectroscopies and Scanning Electron Microscopy. Results show that the solution chemistry played a key role in the evolution of the clay-solution systems. In H2SO4 systems, the solution pH steadily increased due to partial clay dissolution with no secondary phase formation detected. Contrary, in the ARD systems, the pH decreased due to the ample presence of Fe which controlled both the reactivity of clays by the growth of protecting surface coatings and the solution pH by the precipitation of Fe nanophases; secondary phase detected included goethite, jarosite, gypsum, and siderite. These results indicate that, on Mars, the chemical interaction between clays and acidic solutions was complex and dependent on the solution chemistry. Acidic, sulfate-rich solutions have a high dissolution capacity and could have induced widespread clay disintegration. Notably, if Fe-rich ARD was involved, the clays on Mars could have remained stable during acidic Hesperian period due to formation of protective coatings. Comparison of our results with martian observations will be performed to determine how acidic conditions could potentially affect clays in sedimentary settings, including the Gale crater.

L. Lefticariu↗
NASA NTRS2017

Smectite Formation in the Presence of Sulfuric Acid: Implications for Acidic Smectite Formation on Early Mars

The excess of orbital detection of smectite deposits compared to carbonate deposits on the martian surface presents an enigma because smectite and carbonate formations are both favored alteration products of basalt under neutral to alkaline conditions. We propose that Mars experienced acidic events caused by sulfuric acid (H2SO4) that permitted phyllosilicate, but inhibited carbonate, formation. To experimentally verify this hypothesis, we report the first synthesis of smectite from Mars-analogue glass-rich basalt simulant (66 wt% glass, 32 wt% olivine, 2 wt% chromite) in the presence of H2SO4 under hydrothermal conditions (approximately 200 degC). Smectites were analyzed by X-ray diffraction, Mossbauer spectroscopy, visible and near-infrared reflectance spectroscopy and electron microprobe to characterize mineralogy and chemical composition. Solution chemistry was determined by Inductively Coupled Plasma Mass Spectrometry. Basalt simulant suspensions in 11-42 mM H2SO4 were acidic with pH less than or equal to 2 at the beginning of incubation and varied from acidic (pH 1.8) to mildly alkaline (pH 8.4) at the end of incubation. Alteration of glass phase during reaction of the basalt simulant with H2SO4 led to formation of the dioctahedral smectite at final pH approximately 3 and trioctahedral smectite saponite at final pH approximately 4 and higher. Anhydrite and hematite formed in the final pH range from 1.8 to 8.4 while natroalunite was detected at pH 1.8. Hematite was precipitated as a result of oxidative dissolution of olivine present in Adirondack basalt simulant. Formation of secondary phases, including smectite, resulted in release of variable amounts of Si, Mg, Na and Ca while solubilization of Al and Fe was low. Comparison of mineralogical and solution chemistry data indicated that the type of smectite (i.e., dioctahedral vs trioctahedral) was likely controlled by Mg leaching from altering basalt and substantial Mg loss created favorable conditions for formation of dioctahedral smectite. We present a model for global-scale smectite formation on Mars via acid-sulfate conditions created by the volcanic outgassing of SO2 in the Noachian and early Hesperian.

Smectite↗
DOE OSTI2026

Zero Order Reactioin Kinetics: Enabling the use of Detailed Chemical Kinetics in Combustion Simulations (Final CRADA Report)

This was a collaborative effort between Lawrence Livermore National Security, LLC (LLNS), as manager and operator of Lawrence Livermore National Laboratory (LLNL) and Gamma Technologies, LLC (GT or Participante), to incorporate the ability to access LLNL chemical kinetics technologies while using GT-SUITE, GT’s market leading engine simulation software. At the end of the project, LLNL has released Zero-RK version 3.5 with zero- and one-dimensional (0-D and 1-D) solver functionality that interfaces with GT’s GT-SUITE v2023 and later releases. GT has tested its product to assure their customers that the interface can provide reduction in chemistry solution time for detailed chemistry simulations. The process has also positioned GT to easily benefit from future improvements of the Zero-RK suite of tools developed under the DOE Vehicle Technologies Office.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1989

Computational solution of chemistry problems

AB initio quantum chemical techniques have been used to investigate weakly bound complexes of H2O and SO2. An energy gradient program was used to locate stable structures for the H2O, SO2 complexes, and SCF calculations were carried out to determine the binding energies of complexes with multiple water molecules. A 4-31G basis set was used for most potential energy searches. More accurate basis sets including a generally contracted basis set with d orbitals on the sulfur were used for geometry and binding energy verification. For single water complexes, five different stable geometries were located with binding energies between 4 and 11 Kcal mol(-1), suggesting a binding shell for H2O around SO2 and a mechanism for the formation of an SO2-containing water droplet. Calculations on one of the complexes utilizing a larger double zeta basis and d functions on the sulfur atom lead to adjusted binding energies in the range 3 to 8 Kcal mol(-1). Very little charge transfer between SO2 and H2O was present. Addition of more than one H2O was found to be energetically favorable although the addition of the fourth water in certain geometries did not increase the stability of the complex. An alternative mechanism for the tropospheric gas phase production of acid rain is suggested.

Ake, Robert L.↗
DOE OSTI2025

AquaMEND: Reconciling multiple impacts of salinization on soil carbon biogeochemistry

Soil salinization, exacerbated by climate change, poses a global threat to coastal ecosystem function and soil quality. Salinity influences carbon cycling through direct effects on microbial activity and indirect alterations to soil physicochemical properties including cation exchange, pH, and soil organic carbon availability. Current models inadequately represent these complexities, relying on linear reduction functions that overlook specific physicochemical changes induced by salinity. To address this gap, we propose an integrated model framework, AquaMEND, that combines microbial-explicit carbon decomposition and geochemical models. This model allows cation exchange and surface complexation processes to capture solute chemistry and nutrient availability in soils upon saltwater intrusion. Using response functions that capture salinity impacts on both salt-sensitive and salt-resistant microbial processes, AquaMEND simulates how the abiotic and biotic mechanisms work individually and collectively to regulate organic and inorganic pools and fluxes. Here, the parallel structure of aqueous and non-aqueous phases, together with microbial functions, result in a versatile model for solving dynamic coupling of organics, minerals and microbes under various environmental settings.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2010

McMurdo Dry Valleys, Antarctica - A Mars Phoenix Mission Analog

The Phoenix mission (PHX; May 25 - Nov. 2, 2008) studied the north polar region of Mars (68deg N) to understand the history of water and potential for habitability. Phoenix carried with it a wet chemistry lab (WCL) capable of determining the basic solution chemistry of the soil and the pH value, a thermal and evolved-gas analyzer capable of determining the mineralogy of the soil and detecting ice, microscopes capable of seeing soil particle shapes, sizes and colors at very high resolution, and a soil probe (TECP) capable of detecting unfrozen water in the soil. PHX coincided with an international effort to study the Earth s polar regions named the International Polar Year (IPY; 2007-2008). The best known Earth analog to the Martian high-northern plains, where Phoenix landed, are the McMurdo Dry Valleys (MDV), Antarctica (Fig. 1). Thus, the IPY afforded a unique opportunity to study the MDV with the same foci - history of water and habitability - as PHX. In austral summer 2007, our team took engineering models of WCL and TECP into the MDV and performed analgous measurements. We also collected sterile samples and analyzed them in our home laboratories using state-of-the-art tools. While PHX was not designed to perform biologic analyses, we were able to do so with the MDV analog samples collected.

Tamppari, L. K.↗
NASA NTRS2004

Gas Hydrate Stability at Low Temperatures and High Pressures with Applications to Mars and Europa

Gas hydrates are implicated in the geochemical evolution of both Mars and Europa [1- 3]. Most models developed for gas hydrate chemistry are based on the statistical thermodynamic model of van der Waals and Platteeuw [4] with subsequent modifications [5-8]. None of these models are, however, state-of-the-art with respect to gas hydrate/electrolyte interactions, which is particularly important for planetary applications where solution chemistry may be very different from terrestrial seawater. The objectives of this work were to add gas (carbon dioxide and methane) hydrate chemistries into an electrolyte model parameterized for low temperatures and high pressures (the FREZCHEM model) and use the model to examine controls on gas hydrate chemistries for Mars and Europa.

Marion, G. M.↗
NASA NTRS1989

High performance alloy electroforming

Electroformed copper and nickel are used in structural applications for advanced propellant combustion chambers. An improved process has been developed by Bell Aerospace Textron, Inc. wherein electroformed nickel-manganese alloy has demonstrated superior mechanical and thermal stability when compared to previously reported deposits from known nickel plating processes. Solution chemistry and parametric operating procedures are now established and material property data is established for deposition of thick, large complex shapes such as the Space Shuttle Main Engine. The critical operating variables are those governing the ratio of codeposited nickel and manganese. The deposition uniformity which in turn affects the manganese concentration distribution is affected by solution resistance and geometric effects as well as solution agitation. The manganese concentration in the deposit must be between 2000 and 3000 ppm for optimum physical properties to be realized. The study also includes data regarding deposition procedures for achieving excellent bond strength at an interface with copper, nickel-manganese or INCONEL 718. Applications for this electroformed material include fabrication of complex or re-entry shapes which would be difficult or impossible to form from high strength alloys such as INCONEL 718.

Malone, G. A.↗
DOE OSTI2025

Non-stoichiometry Governs the Pathway from Amorphous to Crystalline Calcium Carbonate

The controlled crystallization of calcium carbonate underlies the elaborate architectures of marine corals, the design of biomimetic materials, and the global carbon cycle. Despite its ubiquity, the chemical mechanisms that govern the crystallization of calcium carbonate from its amorphous precursor, amorphous calcium carbonate (ACC), remain elusive, largely due to the difficulty in resolving the structure and chemistry of this transient amorphous state. Here, we use time-lapse photography, image analysis, spatially resolved pH determination, in situ synchrotron pair distribution function (PDF) analysis, and dynamic nuclear polarization (DNP) solid-state nuclear magnetic resonance (NMR) spectroscopy to reveal pervasive compositional variability in ACC that underpins its metastability and crystallization. By evaluating the kinetics of the amorphous-to-crystalline transition across different solution chemistries, we demonstrate that ACC is non-stoichiometric and CO 3 -deficient. Counterions from the precursor (e.g., NO 3 - from Ca(NO 3 ) 2 ) substitute into the ACC network, displacing CO 3 ions and mediating both ACC stability and transformation. Crystallization proceeds through refinement of the stoichiometry toward CaCO 3 and uptake of free CO 3 2- anions. Furthermore, these findings are consistent across a wide range of concentrations and different carbonate sources, explaining the diverse behaviors observed for ACC and providing a chemical framework for controlling calcium carbonate crystallization.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS2006

Lab-Scale Study of the Calcium Carbonate Dissolution and Deposition by Marine Cyanobacterium Phormidium subcapitatum

Suggestions that calcification in marine organisms changes in response to global variations in seawater chemistry continue to be advanced (Wilkinson, 1979; Degens et al. 1985; Kazmierczak et al. 1986; R. Riding 1992). However, the effect of [Na+] on calcification in marine cyanobacteria has not been discussed in detail although [Na+] fluctuations reflect both temperature and sea-level fluctuations. The goal of these lab-scale studies therefore was to study the effect of environmental pH and [Na+] on CaCO3 deposition and dissolution by marine cyanobacterium Phormidium subcapitatum. Marine cyanobacterium P. subcapitatum has been cultivated in ASN-III medium. [Ca2+] fluctuations were monitored with Ca(2+) probe. Na(+) concentrations were determined by the initial solution chemistry. It was found that the balance between CaCO3 dissolution and precipitation induced by P. subcapitatum grown in neutral ASN III medium is very close to zero. No CaCO3 precipitation induced by cyanobacterial growth occurred. Growth of P. subcapitatum in alkaline ASN III medium, however, was accompanied by significant oscillations in free Ca(2+) concentration within a Na(+) concentration range of 50-400 mM. Calcium carbonate precipitation occurred during the log phase of P. subcapitatum growth while carbonate dissolution was typical for the stationary phase of P. subcapitatum growth. The highest CaCO3 deposition was observed in the range of Na(+) concentrations between 200-400 mM. Alkaline pH also induced the clamping of P. subcapitatum filaments, which appeared to have a strong affinity to envelop particles of chemically deposited CaCO3 followed by enlargement of those particles size. EDS analysis revealed the presence of Mg-rich carbonate (or magnesium calcite) in the solution containing 10-100 mM Na(+); calcite in the solution containing 200 mM Na(+); and aragonite in the solution containing with 400 mM Na(+). Typical present-day seawater contains xxmM Na(+). Early (Archean) seawater was likely less saline. The division of marine cyanobacterium P. subcapitatum is associated with periodic deposition and dissolution of CaCO3, the rhythms and intensity of which are dependent on concentrations of both OH(-) and Na(+). Thus, the role of present-day marine cyanobacteria in the global carbonate cycle might be reduced to aggregation and recrystallization of available CaCO3 particles in marine water rather than long-term precipitation and accumulation of CaCO3 deposits. For lower Na(+) concentrations, precipitation of carbonates by cyanobacteria would be even less significant. These results suggest that the lack of calcified cyanobacteria in stromatalite-bearing Precambrian sequences can be explained not only by high dissolved inorganic carbon concentrations but also by lower salinity, as well as possible lower pH compared to present-day oceans.

Karakis, S. G.↗
NASA NTRS1996

Aerothermodynamic Analysis of Commercial Experiment Transporter (COMET) Reentry Capsule

An aerothermodynamic analysis of the Commercial Experiment Transporter (COMET) reentry capsule has been performed using the laminar thin-layer Navier-Stokes solver Langley Aerothermodynamic Upwind Relaxation Algorithm. Flowfield solutions were obtained at Mach numbers 1.5, 2, 5, 10, 15, 20, 25, and 27.5. Axisymmetric and 5, 10, and 20 degree angles of attack were considered across the Mach-number range, with the Mach 25 conditions taken to 90 degrees angle of attack and the Mach 27.5 cases taken to 60 degrees angle of attack. Detailed surface heat-transfer rates were computed at Mach 20 and 25, revealing that heating rates on the heat-shield shoulder ,can exceed the stagnation-point heating by 230 percent. Finite-rate chemistry solutions were performed above Mach 10, otherwise perfect gas computations were made. Drag, lift, and pitching moment coefficients are computed and details of a wake flow are presented. The effect of including the wake in the solution domain was investigated and base pressure corrections to forebody drag coefficients were numerically determined for the lower Mach numbers. Pitching moment comparisons are made with direct simulation Monte Carlo results in the more rarefied flow at the highest Mach numbers, showing agreement within two-percent. Thin-layer Navier-Stokes computations of the axial force are found to be 15 percent higher across the speed range than the empirical/Newtonian based results used during the initial trajectory analyses.

Wood, William A.↗
NASA NTRS2003

Crystallization Physics in Biomacromolecular Systems

The crystals are built of molecules of protein, nucleic acid and their complexes, like viruses, approx. 5x10(exp 3)+ 3x10(exp 6) Da in weight and 2 + 20 nm in effective diameter. This size strongly exceeds action range of molecular forces and makes a big difference with inorganic crystals. Intermolecular contacts form patches on the biomacromolecular surface. Each patch may occupy only a small percent of the whole surface and vary from polymorph to polymorph of the same protein. Thus, under different conditions (pH, solution chemistry, temperature, any area on the macromolecular surface may form a contact. The crystal Young moduli, E approx. equals 0.1 + 0.5 GPa are more than 10 times lower than that of inorganics and the biomolecules themselves. Water within biocrystals (30-70%) is unable to flow unless typical deformation time is longer than approx. 10(exp -5)s. This explains the discrepancy between light scattering and static measurements of E. Nucleation and Growth requires typically concentrations exceeding the equilibrium ones up to 100 times - because of the new size scale results in 10 - 10(exp 3) times lower kinetic coefficients than that needed for inorganic solution growth. All phenomena observed in the latter occur with protein crystallization and are even better studied by AFM. Crystals are typically facetted. Among unexpected findings of general significance are - net molecular exchange flux at kinks is much lower than that expected from supersaturation, steps with low (< approx. 10(exp -2)) kink density at steps follow Gibbs-Thomson law only at very low supersaturations, step segment growth rate may be independent of step energy. Crystal perfection is a must of biocrystallization to achieve the major goal to find 3-D atomic structure of biomacromolecules by x-ray diffraction. Poor diffraction resolution (> 3Angstrom) makes crystallization a bottleneck for structural biology. All defects typical of small molecule crystals are found in biocrystals, but the defects responsible for poor resolution are not identified. Conformational changes are one of them. Biocrystallization in microgravity reportedly results in 20% cases of better crystals. The mechanism of how lack of convection can do this is still not clear. Lower supersaturation, self-purification &om preferentially trapped homologous impurities and step bunching are viable hypotheses.

Chernov, A. A.↗