Search NASA⌕ Search

SEARCH · Search NASA

Results for “solution pulse”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Pulsed Laser System to Simulate Effects of Cosmic Rays in Semiconductor Devices

Spaceflight system electronic devices must survive a wide range of radiation environments with various particle types including energetic protons, electrons, gamma rays, x-rays, and heavy ions. High-energy charged particles such as heavy ions can pass straight through a semiconductor material and interact with a charge-sensitive region, generating a significant amount of charge (electron-hole pairs) along their tracks. These excess charges can damage the device, and the response can range from temporary perturbations to permanent changes in the state or performance. These phenomena are called single event effects (SEE). Before application in flight systems, electronic parts need to be qualified and tested for performance and radiation sensitivity. Typically, their susceptibility to SEE is tested by exposure to an ion beam from a particle accelerator. At such facilities, the device under test (DUT) is irradiated with large beams so there is no fine resolution to investigate particular regions of sensitivity on the parts. While it is the most reliable approach for radiation qualification, these evaluations are time consuming and costly. There is always a need for new cost-efficient strategies to complement accelerator testing: pulsed lasers provide such a solution. Pulsed laser light can be utilized to simulate heavy ion effects with the advantage of being able to localize the sensitive region of an integrated circuit. Generally, a focused laser beam of approximately picosecond pulse duration is used to generate carrier density in the semiconductor device. During irradiation, the laser pulse is absorbed by the electronic medium with a wavelength selected accordingly by the user, and the laser energy can ionize and simulate SEE as would occur in space. With a tightly focused near infrared (NIR) laser beam, the beam waist of about a micrometer can be achieved, and additional scanning techniques are able to yield submicron resolution. This feature allows mapping of all of the sensitive regions of the studied device with fine resolution, unlike heavy ion experiments. The problematic regions can be precisely identified, and it provides a considerable amount of information about the circuit. In addition, the system allows flexibility for testing the device in different configurations in situ.

Aveline, David C.↗
NASA NTRS1990

Evolution equation for infinitesimal rotational discontinuities

An evolution equation in the form of a modified Korteweg-de Vries equation is developed which describes the small-amplitude version of the infinitesimal rotational discontinuity (RD) studied by Wang and Sonnerup (1984). It is shown that the small-amplitude version of the equilibrium pulse solution obtained by Wang and Sonnerup is metastable and thus unlikely to arise spontaneously. When the initial pulse amplitude is smaller than and/or the initial pulse width is greater than the equilibrium value, the pulse decays. When the reverse is the case, the pulse is converted to an infinitesimal intermediate-mode solitary wave having greater pulse amplitude and speed. A simulation experiment is performed in which one of the equilibrium intermediate-mode solitary waves overtakes another, less rapidly moving version of the same wave. The existence of multipeaked intermediate-mode solitary pulses is demonstrated.

Sonnerup, B. U. O.↗
NASA NTRS1980

An extended field method solution for a pulse loaded thin plate

This paper deals with a new extension of a weighted residual method of analysis called the extended field method. The extended field method is applied for the first time to the problem of the transient vibration of a uniformly thin elastic plate. Numerical results have been obtained which validate the analysis procedure and show better solution convergence than is obtainable by standard methods of analysis for the same number of degrees of freedom. Further studies are necessary to obtain still better convergence.

Donaldson, B. K.↗
NASA NTRS1992

Pulsed plane wave analytic solutions for generic shapes and the validation of Maxwell's equations solvers

Generic shapes are subjected to pulsed plane waves of arbitrary shape. The resulting scattered electromagnetic fields are determined analytically. These fields are then computed efficiently at field locations for which numerically determined EM fields are required. Of particular interest are the pulsed waveform shapes typically utilized by radar systems. The results can be used to validate the accuracy of finite difference time domain Maxwell's equations solvers. A two-dimensional solver which is second- and fourth-order accurate in space and fourth-order accurate in time is examined. Dielectric media properties are modeled by a ramping technique which simplifies the associated gridding of body shapes. The attributes of the ramping technique are evaluated by comparison with the analytic solutions.

Yarrow, Maurice↗
NASA NTRS1969

Primary radical yields in pulse irradiated alkaline aqueous solution

Primary radical yields of hydrated electrons, H atoms, and OH radicals are determined by measuring hydrated electron formation following a 4 microsecond pulse of X rays. The pH dependence of free radical yields beyond pH 12 is determined by observation of the hydrated electrons.

Fielden, E. M.↗
NASA NTRS1974

Monitoring the sea surface with a short pulse radar

A solution is presented for the scattering of short pulses from a stochastic, corrugated surface relative to the sea for the case of a narrow-beam transmitting antenna pointing near nadir. The spectrum of the received power and its time history are calculated and this solution is used to show that a measure of the variance of the surface ordinant can be obtained from the backscattered power. Included explicitly in the analysis is the finite nature of the source and the role of the small-scale wave structure (capillary wave range). It is shown that when sufficiently short pulses are transmitted, one can obtain a measure of the variance of the large scale surface ordinant from either the temporal spacing of the peaks in the returned power or from the envelope of the spectrum of the received power. Assuming an appropriate model for the statistics and spectrum of the surface ordinate, the variance can be used to compute the wind speed and the significant wave height of the surface.

Le Vine, D. M.↗
NASA NTRS2012

Analysis and Sizing for Transient Thermal Heating of Insulated Aerospace Vehicle Structures

An analytical solution was derived for the transient response of an insulated structure subjected to a simplified heat pulse. The solution is solely a function of two nondimensional parameters. Simpler functions of these two parameters were developed to approximate the maximum structural temperature over a wide range of parameter values. Techniques were developed to choose constant, effective thermal properties to represent the relevant temperature and pressure-dependent properties for the insulator and structure. A technique was also developed to map a time-varying surface temperature history to an equivalent square heat pulse. Equations were also developed for the minimum mass required to maintain the inner, unheated surface below a specified temperature. In the course of the derivation, two figures of merit were identified. Required insulation masses calculated using the approximate equation were shown to typically agree with finite element results within 10%-20% over the relevant range of parameters studied.

Blosser, Max L.↗
NASA NTRS2012

Rotating Radio Transients and Their Place Among Pulsars

Six years ago, the discovery of Rotating Radio Transients (RRATs) marked what appeared to be a new type of sparsely-emitting pulsar. Since 2006, more than 70 of these objects have been discovered in single-pulse searches of archival and new surveys. With a continual inflow of new information about the RRAT population in the form of new discoveries, multi-frequency follow ups, coherent timing solutions, and pulse rate statistics, a view is beginning to form of the place in the pulsar population RRATs hold. Here we review the properties of neutron stars discovered through single pulse searches. We first seek to clarify the definition of the term RRAT, emphasising that "the RRAT population" encompasses several phenomenologies. A large subset of RRATs appears to represent the tail of an extended distribution of pulsar nulling fractions and activity cycles; these objects present several key open questions remaining in this field.

stars↗
NASA NTRS1989

A moment method solution of a volume-surface integral equation using isoparametric elements and point matching

Three integral equations for TE (transverse electric) scattering by dielectric cylinders having large values of permittivity are examined. A moment-method solution of the volume-surface integral equation is developed employing isoparametric elements and point matching. The solution is shown to be more accurate and stable than the traditional solutions using pulse basis, particularly in the case of scatterers having large refractive indices.

Jin, Jian-Ming↗
NASA NTRS1972

Diffraction of a plane pulse by a three-dimensional corner.

The conical solutions for the incidence of a plane pulse on a three-dimensional corner are presented. The corner is represented by a trihedron with one edge perpendicular to the other two. Both the boundary condition of the first kind and that of the second kind are considered. Outside the characteristic sphere of the vertex of the corner, the solution is represented by the well-known conical solutions in two variables. Inside the characteristic sphere, the problem involves three conical variables. By the separation of variables, the problem is reduced to that of an eigenvalue problem with an irregular boundary which is in turn reduced to a system of homogeneous algebraic equations. The eigenvalues are then determined numerically. By the superposition of the conical solutions for plane pulses, the solution for the incidence of a plane wave is obtained. Numerical examples simulating the incidence of a sonic boom on the corner of a structure are presented.

Ting, L.↗
NASA NTRS1975

Heating of solid targets with laser pulses

Analytical and numerical solutions to the heat-conduction equation are obtained for the heating of absorbing media with pulsed lasers. The spatial and temporal form of the temperature is determined using several different models of the laser irradiance. Both surface and volume generation of heat are discussed. It is found that if the depth of thermal diffusion for the laser-pulse duration is large compared to the optical-attenuation depth, the surface- and volume-generation models give nearly identical results. However, if the thermal-diffusion depth for the laser-pulse duration is comparable to or less than the optical-attenuation depth, the surface-generation model can give significantly different results compared to the volume-generation model. Specific numerical results are given for a tungsten target irradiated by pulses of different temporal durations and the implications of the results are discussed with respect to the heating of metals by picosecond laser pulses.

Bechtel, J. H.↗
NASA NTRS1992

Rotational parameters of PSR 0540 - 69 as measured at optical wavelengths

The rotation frequency of the 50 ms pulsar PSR 0540 - 69 utilizing data collected at the ESO 3.6 m telescope at La Silla is measured. The observations were acquired in the interval 1989 January-1991 April. The average pulse shape displays a broad enhancement with a superposed double-peaked structure. It was possible to phase-relate the data between 1990 March and 1991 April indicating the pulsar did not display any large spin discontinuities during that time span. Three solutions, incorporating a pulse number ambiguity of +/- 1, are presented. The preferred solution yields a braking index of 2.04 +/- 0.02, comparable with GINGA measurements in 1987. Discrepancies between these results and extrapolation of the GINGA results are discussed.

Gouiffes, Christian↗
NASA NTRS1979

Directional spectra of ocean waves from microwave backscatter: A physical optics solution with application to the short-pulse and two-frequency measurement techniques

Two simple microwave radar techniques that are potentially capable of providing routine satellite measurements of the directional spectrum of ocean waves were developed. One technique, the short pulse technique, makes use of very short pulses to resolve ocean surface wave contrast features in the range direction; the other technique, the two frequency correlation technique makes use of coherency in the transmitted waveform to detect the large ocean wave contrast modulation as a beat or mixing frequency in the power backscattered at two closely separated microwave frequencies. A frequency domain analysis of the short pulse and two frequency systems shows that the two measurement systems are essentially duals; they each operate on the generalized (three frequency) fourth-order statistical moment of the surface transfer function in different, but symmetrical ways, and they both measure the same directional contrast modulation spectrum. A three dimensional physical optics solution for the fourth-order moment was obtained for backscatter in the near vertical, specular regime, assuming Gaussian surface statistics.

Jackson, F. C.↗
NASA NTRS1978

Evaluation of the SSRCT engine with a hydrazine as a fuel, phase 1

The performance parameters for the space shuttle reaction control thruster (SSRCT) when the fuel is changed from monomethylhydrazine to hydrazine were predicted. Potential problems are higher chamber wall temperature during steady state operation and explosive events during pulse mode operation. Solutions to the problems are suggested. To conduct the analysis, a more realistic film cooling model was devised which considers that hydrazine based fuels are reactive when used as a film coolant on the walls of the combustion chamber. Hydrazine based fuels can decompose exothermally as a monopropellant and also enter into bipropellant reactions with any excess oxidizer in the combustion chamber. It is concluded that the conversion of the thruster from MMH to hydrazine fuel is feasible but that a number of changes would be required to achieve the same safety margins as the monomethylhydrazine-fueled thruster.

Minton, S. J.↗