Search NASA⌕ Search

SEARCH · Search NASA

Results for “solvent annealing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Simulation of Defect Reduction in Block Copolymer Thin Films by Solvent Annealing

Solvent annealing provides an effective means to control the self-assembly of block copolymer (BCP) thin films. Multiple effects, including swelling, shrinkage, and morphological transitions, act in concert to yield ordered or disordered structures. The current understanding of these processes is limited; by relying on a theoretically informed coarse-grained model of block copolymers, a conceptual framework is presented that permits prediction and rationalization of experimentally observed behaviors. Through proper selection of several process conditions, it is shown that a narrow window of solvent pressures exists over which one can direct a BCP material to form well-ordered, defect-free structures.

Hur, Su-Mi↗

Tuning the Morphology and Performance of Low Bandgap Polymer: Fullerene Heterojunctions via Solvent Annealing in Selective Solvents

Low bandgap polymer (LBG):fullerene mixtures are some of the most promising organic photovoltaic active layers. Unfortunately, there are no post-deposition treatments available to rationally improve the morphology and performance of as-cast LBG:fullerene OPV active layers, where thermal annealing usually fails. Therefore, there is a glaring need to develop postdeposition methods to guide the morphology of LBG:fullerene bulk heterojunctions towards targeted structures and performance. In this paper, the structural evolution of PCPDTBT:PCBM mixtures with solvent annealing (SA) is examined, focusing on the effect of solvent quality of the fullerene and polymer in the annealing vapor on morphological evolution and device performance. The results indicate that exposure of this active layer to the solvent vapor controls the ordering of PCPDTBT and PCBM phase separation very effectively, presumably by inducing component mobility as the solvent plasticizes the mixture. These results also unexpectedly indicate that solvent annealing in a selective solvent provides a method to invert the morphology of the LBG:fullerene mixture from a polymer aggregate dispersed in a polymer:fullerene matrix to fullerene aggregates dispersed in a polymer:fullerene matrix. The judicious choice of solvent vapor, therefore, provides a unique method to exquisitely control and optimize the morphology of LBG conjugated polymer/fullerene mixtures.

Chen, Huipeng↗

Simultaneous spin-coating and solvent annealing: Manipulating the active layer morphology to a power conversion efficiency of 9.6% in polymer solar cells

Here, we developed a simultaneous spin-coating/solvent-annealing process and demonstrated morphology optimization for PTB7 based organic photovoltaics. This novel processing method enhances the edge-on crystalline content in thin films and induces the formation of weak PCBM aggregates. As a result, the efficiency of polymer solar cells increased from 9.2% to a certified high efficiency of 9.61%, owing to an enhanced short-circuit current (J sc , 18.4 mA cm –2 vs. 17. 5 mA cm –2 ) and an improved fill factor.

36 MATERIALS SCIENCE↗

Perovskite Solar Cells with Enhanced Fill Factors Using Polymer-Capped Solvent Annealing

Despite huge improvements in power conversion efficiencies of perovskite solar cells, the technology is still limited by fill factors at around 80%. In this work, we report perovskite solar cells having exceptionally high fill factors of 85% and enhanced open-circuit voltage without sacrificing short-circuit current through a polymer-capped solvent-annealing process assisted by a hot air blower. Additionally, during the solvent-annealing, the perovskite surface flattens and the perovskite grains agglomerate into micrometer-sized clusters having enlarged α-phase crystallites, while the δ-phase simultaneously disappears. The optimized structure reduces energetic disorder and trap-assisted recombination in the perovskite layer, resulting in an enhanced efficiency from 18.2% to 19.8% and improved device lifetime. Our results provide a pathway to increase the device efficiency and stability of perovskite solar cells, and have the potential to stimulate research on scalable poly-crystal perovskite layer fabrication in optoelectronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Roll-to-Roll Scalable Production of Ordered Microdomains through Nonvolatile Additive Solvent Annealing of Block Copolymers

A new method, “nonvolatile solvent vapor annealing” (NVASA), has been developed to anneal block copolymers during film deposition by controlling the solvent drying process. Precise amounts of high boiling point additive added to the polymer solution briefly remain in the polymer film after casting, leaving the film in a swollen state, increasing its chain mobility, and ultimately improving domain order. We demonstrated the effectiveness of NVASA on several block copolymer systems and used in situ grazing incidence small-angle X-ray scattering (GISAXS) to validate the ordering process during the self-assembly. The simplicity and reproducibility of the method is attractive for implementation in large-scale manufacturing processes such as roll-to-roll printing as swell ratio is easily controlled by the amount of additive used and separate annealing steps are not needed. This work potentially introduces a new way to quickly and cost effectively anneal block copolymers.

36 MATERIALS SCIENCE↗

Solution-processed BiI 3 thin films for photovoltaic applications: Improved carrier collection via solvent annealing

Here, we report all-inorganic solar cells based on solution-processed BiI 3 . Two-electron donor solvents such as tetrahydrofuran and dimethylformamide were found to form adducts with BiI 3 , which make them highly soluble in these solvents. BiI 3 thin films were deposited by spin-coating. Solvent annealing BiI 3 thin films at relatively low temperatures (≤100 °C) resulted in increased grain size and crystallographic reorientation of grains within the films. The BiI3 films were stable against oxidation for several months and could withstand several hours of annealing in air at temperatures below 150 °C without degradation. Surface oxidation was found to improve photovoltaic device performance due to the formation of a BiOI layer at the BiI 3 surface which facilitated hole extraction. Nonoptimized BiI 3 solar cells achieved the highest power conversion efficiencies of 1.0%, demonstrating the potential of BiI 3 as a nontoxic, air-stable metal-halide absorber material for photovoltaic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synergistic effects of lead thiocyanate additive and solvent annealing on the performance of wide-bandgap perovskite solar cells

Here, we show that the cooperation of lead thiocyanate additive and a solvent annealing process can effectively increase the grain size of mixed-cation lead mixed-halide perovskite thin films while avoiding excess lead iodide formation. As a result, the average grain size of the wide-bandgap mixed-cation lead perovskite thin films increases from 66 ± 24 to 1036 ± 111 nm, and the mean carrier lifetime shows a more than 3-fold increase, from 330 ns to over 1000 ns. Consequently, the average open-circuit voltage of wide-bandgap perovskite solar cells increases by 80 (70) mV, and the average power conversion efficiency (PCE) increases from 13.44 ± 0.48 (11.75 ± 0.34) to 17.68 ± 0.36 (15.58 ± 0.55)% when measured under reverse (forward) voltage scans. The best-performing wide-bandgap perovskite solar cell, with a bandgap of 1.75 eV, achieves a stabilized PCE of 17.18%.

14 SOLAR ENERGY↗

Field-theoretic Simulations of Block Copolymers: Design and Solvent Annealing

We first propose a solution to the inverse design problem for block copolymers that uses self-consistent field theory (SCFT) with numerical optimization. We apply our design methodology to both conformationally symmetric and asymmetric diblock copolymer melts. In the latter case, the parameters are specific to poly(ethylene oxide-b-styrene) block copolymer (PEO-PS), a material currently being explored as an electrolyte for lithium-ion batteries. The results of this design approach not only guide the synthesis of block copolymers but also shed light on the polymer physics of the gyroid phase. Second, we develop an SCFT to isolate and study the dynamical aspects of micro-phase separation in block copolymer films during the film drying process. Key questions include whether evaporation rate as a controlled, independent variable can effect a change in microdomain orientation, whether a concentration-dependent kinetic mobility is required to explain such an effect, and working out the consequences for controlling the morphology alignment in copolymer films of varying thicknesses.

36 MATERIALS SCIENCE↗

Simple orientational control over cylindrical organic-inorganic block copolymer domains for etch mask applications.

Bottom-up patterning methodologies, predicated on chemical self-assembly, have the potential to transcend limitations associated with more traditional lithographies. By controlling the domain orientation of a cylinder-forming organic-inorganic block copolymer, poly(styrene-block-ferrocenyldimethylsilane), it is possible to straightforwardly fabricate massive arrays of either nanoscale dots or wires out of a film composed of a wide variety of materials. In the work reported here, orientational control is achieved by manipulating the polymer film thickness in concert with the annealing treatment. For films much thinner than the equilibrium periodicity of the microdomains, the cylinders spontaneously orient themselves perpendicular to the substrate. Films with thickness close to the equilibrium periodicity exhibit the more common in-plane orientation following thermal annealing. Solvent annealing leads to an in-plane orientation for the full range of film thicknesses studied. As a demonstration of the effectiveness of this method, semiconductor substrates were patterned with arrays of posts and wires, respectively, using the same starting polymeric material as the etch mask. Compatibility of this polymer with various substrate materials is also demonstrated.

36 MATERIALS SCIENCE↗

Rapid ordering of block copolymer thin films

Block-copolymers self-assemble into diverse morphologies, where nanoscale order can be finely tuned via block architecture and processing conditions. However, the ultimate usage of these materials in real-world applications may be hampered by the extremely long thermal annealing times—hours or days—required to achieve good order. Here, we provide an overview of the fundamentals of block-copolymer self-assembly kinetics, and review the techniques that have been demonstrated to influence, and enhance, these ordering kinetics. We discuss the inherent tradeoffs between oven annealing, solvent annealing, microwave annealing, zone annealing, and other directed self-assembly methods; including an assessment of spatial and temporal characteristics. Here, we also review both real-space and reciprocal-space analysis techniques for quantifying order in these systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗