Search NASA⌕ Search

SEARCH · Search NASA

Results for “source injection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Constraints on Wildfire Smoke Source Strength, Injection Height, and Particle Evolution

Aerosol sources are represented in climate and air quality models with an injection height and a source strength. We have applied a combination of Multi-angle Imaging SpectroRadiometer (MISR) and MODerate resolution Imaging Spectroradiometer (MODIS) observations to help constrain these two key model variables for wildfire smoke plumes. Injection height is obtained from MISR stereo imagery, which makes it possible to map plume elevation and estimate the associated motion vectors at plume altitude near-source, where contrast features in the plume can be identified in the multi-angle views. A current limitation of injection-height mapping is the relatively narrow MISR swath width (~380 km) and 10:30 AM equator crossing time on the day side of Earth. However, upcoming missions, as well as advanced imagers on geostationary platforms, promise to greatly expand the spatial and temporal range over which this technique can be applied. We estimate source strength by matching forward-simulated plume aerosol optical depth (AOD) from models with AOD snapshots retrieved from MODIS observations. This technique works best for large, isolated plumes common in boreal forest, and tends to fail where plume AOD is low and/or background AOD, distinct from the specific source of interest, is high. These two approaches for constraining aerosol modeling with satellite observations have been the subject of ongoing AeroCom/AeroSat studies by our group. A third effort applies the combination of MISR plume heights, wind vectors, and particle microphysical property constraints to infer smoke-plume particle evolution processes and timescales, including the emission and subsequent evolution of black and brown smoke. In this presentation, we will provide an update on the status of these efforts.

wildfire↗
NASA NTRS2014

Constraints on Smoke Injection Height, Source Strength, and Transports from MISR and MODIS

The AeroCom BB (Biomass Burning) Experiment AOD (Aerosol Optical Depth) motivation: We have a substantial set of satellite wildfire plume AOD snapshots and injection heights to help calibrate model/inventory performance; We are 1) adding more fire source-strength cases 2) using MISR to improve the AOD constrains and 3) adding 2008 global injection heights; We selected GFED3-daily due to good overall source strength performance, but any inventory can be tested; Joint effort to test multiple, global models, to draw robust BB injection height and emission strength conclusions. We provide satellite-based injection height and smoke plume AOD climatologies.

smoke injection height↗
NASA NTRS2008

Characterizing SRAM Single Event Upset in Terms of Single and Double Node Charge Collection

A well-collapse source-injection mode for SRAM SEU is demonstrated through TCAD modeling. The recovery of the SRAM s state is shown to be based upon the resistive path from the p+-sources in the SRAM to the well. Multiple cell upset patterns for direct charge collection and the well-collapse source-injection mechanisms are then predicted and compared to recent SRAM test data.

Black, J. D.↗
NASA NTRS1981

On the transport and propagation of relativistic electrons in galaxies

Analytic solutions to the time-dependent equation describing the transport of relativistic electrons that are being convected and diffused, and may be either gaining or losing energy, are described. The calculations yield a body of solutions from which specific ones can be chosen for the modelling of synchrotron radiation in the Galaxy and in other galaxies. The solutions allow for (1) spatially varying convection velocity; (2) an energy and spatially dependent diffusion coefficient; (3) adiabatic acceleration effects; (4) a term describing spatially dependent synchrotron loss and/or Fermi acceleration; (5) an injection source for the electrons that may be impulsive, steady-state, or variable-injection; (6) a spatial injection or spatially more diffuse source; (7) arbitrary energy dependence of the injection source; and (8) spatial and energy boundaries where the spatial or energy form of the convection, diffusion, and energy supply terms in the basic equation can change character.

Lerche, I.↗
NASA NTRS1991

Efficiency of core light injection from sources in the cladding - Bulk distribution

The behavior of the power efficiency of an optical fiber with bulk distribution of sources in its cladding is analyzed. Marcuse's (1988) results for weakly guiding cylindrical fibers with fluorescent sources uniformly distributed in the cladding are confirmed for the bulk distribution case. It is found that power efficiency increases with wavelength and with difference in refractive indices. A new independent variable for the bulk distribution is found, and it is shown that the power efficiency does not always increase with the V number.

Egalon, Claudio O.↗
NASA NTRS1980

Solar wind ion injections in the morning auroral oval

Energy versus time dispersion of precipitating ion bursts was observed during two rocket flights in the morning auroral oval. Individual bursts lasted about 20 seconds and repeated on a time scale of 100 seconds. The dispersion is interpreted as energy-dependent time-of-flight delay which provides identification of ion charge-to-mass ratio as well as injection source distance. The data are consistent with injections of magnetosheath ions with injection distances ranging from 7 to 19 earth radii. Individual events extended over a regin of at least several degrees of magnetic longitude and 0.3 degrees of invariant latitude. It is suggested that these events are associated with turbulent plasma entry into the magnetospheric entry layer.

Carlson, C. W.↗
NASA NTRS1972

Cosmic-ray source and local interstellar spectra deduced from the isotopes of hydrogen and helium.

A self-consistent model for cosmic-ray hydrogen and helium propagation from the sources in the Galaxy to the orbit of earth is obtained, taking into account experimental information now available on the isotopes H-1, H-2, He-3, and He-4. The only adjustable parameters include the shape of the energy spectra of H-1 and He-4 at the time of source injection, the distribution of particle path lengths in interstellar space, and the solar modulation parameters. It is found that the allowed form of the source differential spectra of the H-1 and He-4 nuclei is dominated by a power law in total energy.

Comstock, G. M.↗
NASA NTRS1979

Stratospheric aerosols in the intertropical convergence zone, Panama Canal zone

To investigate whether injection sources of the stratospheric aerosol layer could be detected in the tropical stratosphere, an examination of the aerosol vertical and horizontal size distribution around the Intertropical Convergence Zone (ITCZ) at the Panama Canal Zone was performed during the summer of 1977. By comparing these data with similar measurements in temperate and polar regions, it was hoped to discover variations in particle size that would indicate whether a young aerosol is forming and entering the stratosphere at the ITCZ; where the aerosol matures; and finally, where it reenters the troposphere. The methods used in the investigations and the results obtained from the analyses are described.

Farlow, N. H.↗
NASA NTRS1985

DE-1 phase 3 extended mission data analysis of Dynamics Explorer retarding ion mass spectrometer flight data

Field-aligned motion of ionospheric ions at a low altitudes and different pitch angle distributions of ionospheric ions at high altitudes were studied. The objective is twofold: (1) to discover the degree to which observations made by Dynamics Explorer 1 (DE-1) and DE-2 agree when taken in the same ionospheric volume; (2) to understand the processes operating along a magnetic field tube connecting DE-1 and DE-2 that allow a reconciliation of the two data sets. A second investigation has two facets; to reconcile the observed occurrence of ionospheric ions at high altitudes with a point source injection in the ionosphere and subsequent E x B drift, and to reconcile the observed fluxes of ionospheric ions at high altitudes with the measured upward flux at low altitudes. An understanding of the effects of E x B drift molten on the dispersion of ionospheric ions is attained.

Source record↗
NASA NTRS1987

Titanium-doped sapphire laser research and design study

Three main topics were considered in this study: the fundamental laser parameters of titanium-doped sapphire, characterization of commercially grown material, and design of a tunable, narrow-linewidth laser. Fundamental parameters investigated included the gain cross section, upper-state lifetime as a function of temperature and the surface-damage threshold. Commercial material was found to vary widely in the level of absorption of the laser wavelength with the highest absorption in Czochralski-grown crystals. Several Yi:sapphire lasers were constructed, including a multimode laser with greater than 50mJ of output energy and a single-transverse-mode ring laser, whose spectral and temporal characteristics were completely characterized. A design for a narrow-linewidth (single-frequency) Ti:sapphire laser was developed, based on the results of the experimental work. The design involves the use of a single-frequency, quasi-cw master oscillator, employed as an injection source for a pulsed ring laser.

Moulton, Peter F.↗
NASA NTRS1986

Pulsed injection control of a titanium-doped sapphire laser

Injection control of a tunable Ti:sapphire laser using a narrow-bandwidth pulsed dye laser operating at a wavelength removed from the peak of the Ti:sapphire-laser gain curve is reported. The free-running Ti:sapphire laser had broadband laser emission from 750 to 790 nm. Injection at 727 nm resulted in essentially complete energy extraction at that wavelength in a 2.5-pm bandwidth matching the injection source.

Brockman, Philip↗
NASA NTRS1989

Impulsive acceleration and scatter-free transport of about 1 MeV per nucleon ions in (He-3)-rich solar particle events

Impulsive solar energetic particle (SEP) events are studied to: (1) describe a distinct class of SEP ion events observed in interplanetary space, and (2) test models of focused transport through detailed comparisons of numerical model prediction with the data. An attempt will also be made to describe the transport and scattering properties of the interplanetary medium during the times these events are observed and to derive source injection profiles in these events. ISEE 3 and Helios 1 magnetic field and plasma data are used to locate the approximate coronal connection points of the spacecraft to organize the particle anisotropy data and to constrain some free parameters in the modeling of flare events.

Mason, G. M.↗
NASA NTRS1990

The influence of Oort clouds on the mass and chemical balance of the interstellar medium

The contribution of stellar encounters and interstellar erosion to comet cloud mass injection to the ISM is calculated. It is shown that evaporative mass loss from passing stars and SNe results in an average Galactic mass injection rate of up to 10 to the -5th solar mass/yr if such clouds are frequent around solar-type stars. Cometary erosion by interstellar grains produces an injection rate of 10 to the -5th to 10 to the -4th solar mass/yr. An injection rate of 2 x 10 to the -5th solar mass/yr is calculated. Each of these rates could be increased by a factor of about 15 if the comet clouds contain a significant amount of smaller debris. It is concluded that the total mass injection rate of material to the ISM by comet clouds is small compared to other ISM mass injection sources. Comet cloud mass loss to the ISM could be responsible for a sizeable fraction of the metal and dust abundances of the ISM if Oort clouds are common.

Stern, S. Alan↗
NASA NTRS1991

22 W coherent GaAlAs amplifier array with 400 emitters

Greater than 22 W of optical power has been demonstrated from a multiple-emitter, traveling-wave semiconductor amplifier, with approximately 87 percent of the output at the frequency of the injection source. The device integrates, in AlGaAs graded-index separate-confinement heterostructure single quantum well (GRINSCH-SQW) epitaxy, 400 ridge waveguide amplifiers with a coherent optical signal distribution circuit on a 12 x 6 mm chip.

Krebs, D.↗
NASA NTRS1991

Load flows and faults considering dc current injections

The authors present novel methods for incorporating current injection sources into dc power flow computations and determining network fault currents when electronic devices limit fault currents. Combinations of current and voltage sources into a single network are considered in a general formulation. An example of relay coordination is presented. The present study is pertinent to the development of the Space Station Freedom electrical generation, transmission, and distribution system.

Kusic, G. L.↗
NASA NTRS1995

Phase lags in Cygnus X-1

Coronae of hot electrons are ubiquitous features in models of the inner regions of accreting black holes and nonmagnetic neutron stars. The scattering optical depth of these coronae inferred from observations is often tau approximately 3, so the energy spectrum of the disk in these regions is likely masked by the spectrum of upscattered photons in the corona and some of the disk properties are thus obscured. Observations of the dependence on not available with the energy spectrum. In our picture, the disk emission is modeled as a photon source injected into a Comptonizing corona; Comptonization may also occur in the disk, but for our purposes the disk emission is simply an input to the corona. We show that, contrary to some claims, the functional dependence of lag on Fourier frequency emerges intact from transit through the corona, modulo a multiplicative factor (which may in principle be negative, so that a phase lag can be changed to a phase lead), even if the properties of the corona vary with time. We also show that any frequency dependence of the lag due to variation in the corona itself is only second order in the amplitude of the variation, and cannot exceed the transit time approximately ms of the corona; thus, the lags of up to 0.1 s seen in several black hole candidates come from lags in the emission from the disk. Finally, we predict that plots of the time lag versus Fourier frequency in black hole candidates should have a 'shelf' of constant lag equal to the coronal lag (approximately 1 ms), with the constant being proportional to In (E(sub 2)/E(sub 1)) for the lag between energies E(sub 2) and E(sub 1). The lack of such a shelf in current observations of several galactic black hole candidates constraints the radii of the coronae to be R less than or approximately = 10(exp 8) tau cm.

Miller, M. Coleman↗
NASA NTRS1994

Kinetic and thermodynamic properties of a convecting plasma in a two-dimensional dipole field

Charged particle guiding center motion is considered in the magnetic field of a two-dimensional ('line') dipole on which is superimposed a small, static, perpendicular electric field. The parallel equation of motion is that of a simple harmonic oscillator for cos theta, the cosine of magnetic colatitude theta. Equations for the perpendicular electric and magnetic drifts are derived as well as their bounce-averaged forms. The latter are solved to yield a bounce-averaged guiding center trajectory, which is the same as that obtained from conversation of magnetic moment mu, longitudinal invariant J, and total (kinetic plus electrostatic) energy K. The algebraic simplicity of the trajectory equations is also manifest in the forms of the invariants. An interesting result is that guiding centers drift in such a way that they preserve the values of their equatorial pitch angles and (equivalently) mirror latitudes. The most general Maxwellian form of the equilibrium one-particle distribution function f is constructed from the invariants, and spatially varying density and pressure moments, parallel and perpendicular to the magnetic field, are identified. Much of the paper deals with the more restricted problem in which f is specified as a bi-Maxwellian over a straight line of finite length in the equatorial plane of the dipole and perpendicular to field lines. This might be thought of as specifying a cross-tail ion injection source; our formalism then describes the subsequent spatial development. The distribution away from the source is a scaled bi-Maxwellian but one that is cut off at large and small kinetic energies, which depend on position. Density and pressure components are reduced from the values they would have if the total content of individual flux tubes convected intact. The equatorial and meridional variations of density and pressure components are examined and compared systematically for the isotropic and highly anisotropic situations. There appears to be little qualitative difference due to anisotropy. An anisotropy measure is defined, and its spatial variation determined as a signature of possible MHD instability. Extreme values are found, larger than at the source, but the plasma beta in such regions is probably so low as to render the effect inconsequential energetically. Finally, the possible consequence of 'nonadia- batic' pressure profiles on electrostatic interchanges is considered, and a boundary delineating stabilizing and destabilizing regions determined.

Huang, T. S.↗