Search NASA⌕ Search

SEARCH · Search NASA

Results for “source models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

An Empirical Temperature Variance Source Model in Heated Jets

An acoustic analogy approach is implemented that models the sources of jet noise in heated jets. The equivalent sources of turbulent mixing noise are recognized as the differences between the fluctuating and Favre-averaged Reynolds stresses and enthalpy fluxes. While in a conventional acoustic analogy only Reynolds stress components are scrutinized for their noise generation properties, it is now accepted that a comprehensive source model should include the additional entropy source term. Following Goldstein s generalized acoustic analogy, the set of Euler equations are divided into two sets of equations that govern a non-radiating base flow plus its residual components. When the base flow is considered as a locally parallel mean flow, the residual equations may be rearranged to form an inhomogeneous third-order wave equation. A general solution is written subsequently using a Green s function method while all non-linear terms are treated as the equivalent sources of aerodynamic sound and are modeled accordingly. In a previous study, a specialized Reynolds-averaged Navier-Stokes (RANS) solver was implemented to compute the variance of thermal fluctuations that determine the enthalpy flux source strength. The main objective here is to present an empirical model capable of providing a reasonable estimate of the stagnation temperature variance in a jet. Such a model is parameterized as a function of the mean stagnation temperature gradient in the jet, and is evaluated using commonly available RANS solvers. The ensuing thermal source distribution is compared with measurements as well as computational result from a dedicated RANS solver that employs an enthalpy variance and dissipation rate model. Turbulent mixing noise predictions are presented for a wide range of jet temperature ratios from 1.0 to 3.20.

Khavaran, Abbas↗
DOE OSTI2021

Seismic Source Modeling Software Enhancements (FY21)

Seismic source modeling allows researchers both to simulate how a source that induces seismic waves interacts with the Earth to produce observed seismograms and, inversely, to infer what the time histories, sizes, and force distributions were for a seismic source given observed seismograms. In this report, we discuss improvements made in FY21 to our software as applies to both the forward and inverse seismic source modeling problems. For the forward portion of the problem, we have added the ability to use full 3-D nonlinear simulations by implementing 3-D time varying boundary conditions within Sandia’s linear seismic code Parelasti. Secondly, on the inverse source modeling side, we have developed software that allows us to invert seismic gradiometer-derived observations in conjunction with standard translational motion seismic data to infer properties of the source that may improve characterization in certain circumstances. First, we describe the basic theory behind each software enhancement and then demonstrate the software in action with some simple examples.

58 GEOSCIENCES↗
NASA NTRS1986

Comparison of two propeller source models for aircraft interior noise studies

The sensitivity of the predicted synchrophasing (SP) effectiveness trends to the propeller source model issued is investigated with reference to the development of advanced turboprop engines for transport aircraft. SP effectiveness is shown to be sensitive to the type of source model used. For the virtually rotating dipole source model, the SP effectiveness is sensitive to the direction of rotation at some frequencies but not at others. The SP effectiveness obtained from the virtually rotating dipole model is not very sensitive to the radial location of the source distribution within reasonable limits. Finally, the predicted SP effectiveness is shown to be more sensitive to the details of the source model used for the case of corotation than for the case of counterrotation.

Mahan, J. R.↗
DOE OSTI2025

Dark matter substructure or source model systematics? A case study of cluster lens Abell S1063

Mapping the small-scale structure of the universe through gravitational lensing is a promising tool for probing the particle nature of dark matter. Curved Arc Basis (CAB) has been proposed as a local lensing formalism in galaxy clusters, with the potential to detect low-mass dark matter substructure. In this work, we analyse the cluster lens Abell S1063 in search of dark matter substructure with the CAB formalism, using multiband imaging data from James Webb Space Telescope ( JWST ). We use two different source modelling methods: shapelets and pixel-based source reconstruction based on Delaunay triangulation. We find that source modelling systematics from shapelets result in a disagreement between CAB parameters measured from different filters. Source modelling with Delaunay significantly alleviates this systematic, as seen in the improvement in agreement across filters. We also find that inadequate complexity in source modelling can result in convincing spurious detections of dark matter substructure from strong gravitational lenses, as seen by our $\Delta \text{BIC} > 20$ measurement of a $M \sim 10^{10}$ ${\rm M}_{\odot }$ subhalo with shapelets, a spurious detection that is not reproduced with Delaunay source modelling. We demonstrate that multiband analysis with different JWST filters is key for disentangling source and lens model systematics from dark matter substructure detections.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

A dynamic volumetric heat source model for laser additive manufacturing

Melt pool scale models of laser powder bed fusion (LPBF) offer insights into the process-structure-property relationships in additive manufacturing (AM). These models often neglect physical phenomena such as vapor cavity formation and fluid mechanics to reduce computational demands. Instead, volumetric heat source models are used to represent the effects that these phenomena have on the predicted melt pool dimensions. Generally, the dimensions and effective absorption of the volumetric heat source are calibrated to reproduce melt pool dimensions observed in metallographic cross sections taken from single-track experiments on bare plate. However, the transient nature of LPBF often deviates the melt pool dimensions from the assumed steady-state conditions of single-track experiments, motivating the need for a volumetric heat source model that more generally considers the dynamic relationship between melt pool shape and laser-material interactions. Here, we introduce a two-parameter volumetric heat source model that integrates several existing models into a generalized mathematical expression, providing independent control over the radial heat distribution via the parameter k and the volumetric shape of the heat source via the parameter m. This parameterization enables the calibration of melt pool shape predictions through simultaneous adjustment of these parameters, while keeping the radial heat source dimensions consistent with the experimental spot size (D4σ) and constraining the heat source depth and absorption to physically derived expressions for cavities. Consequently, the proposed volumetric heat source model adapts to changes in the local melt pool conditions due to scanning strategy and part geometry by dynamically adjusting the heat source depth and absorption. We demonstrate the capabilities of the proposed model through comparisons with a collection of experiments from the Additive Manufacturing Benchmark (AMBench).

36 MATERIALS SCIENCE↗
NASA NTRS2004

Application of a Momentum Source Model to the RAH-66 Comanche FANTAIL

A Momentum Source Model has been revised and implemented in the flow solver OVERFLOW-D. In this approach, the fan forces are evaluated from two-dimensional airfoil tables as a function of local Mach number and angle-of-attack and applied as source terms in the discretized Navier-Stokes equations. The model revisions include a new model for forces in the tip region and axial distribution of the source terms. The model revisions improve the results significantly. The Momentum Source Model agrees well with a discrete blade model for all computed collective pitch angles. The two models agree well with experimental data for thrust vs. torque. The Momentum Source Model is a good complement to Discrete Blade Models for ducted fan computations. The lower computational and labor costs make parametric studies, optimization studies and interactional aerodynamics studies feasible for cases beyond what is practical with a Discrete Blade Model today.

Nygaard, Tor A.↗
DOE OSTI2021

A mathematical framework for ejecta cloud dynamics with application to source models and piezoelectric mass measurements

We present a mathematical framework for describing the dynamical evolution of an ejecta cloud generated by a generic ejecta source model. We consider a piezoelectric sensor fielded in the path of an ejecta cloud, for experimental configurations in which the ejecta are created at a singly shocked planar surface and fly ballistically through vacuum to the stationary sensor. To do so, we introduce the concept of a time- and velocity-dependent ejecta “areal mass function.” We derive expressions for the analytic (“true”) accumulated ejecta areal mass at the sensor and the measured (“inferred”) value obtained via the standard method for analyzing piezoelectric voltages. In this way, we derive an exact expression and upper bound for the error imposed upon a piezoelectric ejecta mass measurement (in a perfect system) by the assumption of instantaneous creation, which is commonly required for momentum diagnostic analyses. This error term is zero for truly instantaneous source models; otherwise, the standard piezoelectric analysis is guaranteed to overestimate the true mass. When combined with a piezoelectric dataset, this framework provides a unique solution for the ejecta particle velocity distribution, subject to the assumptions inherent in the data analysis. The framework also leads to strong boundary conditions that any ejecta source model must satisfy in order to be consistent with apparently global properties of piezoelectric measurements from a wide range of experiments. We demonstrate this methodology by applying it to the Richtmyer–Meshkov instability+self-similar velocity distribution ejecta source model currently under development at Los Alamos National Laboratory.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

ALPHANSO: Open-source modeling of (α, n) neutron source terms

Applications ranging from nuclear safeguards to dark matter detection require accurate predictions of neutron yields and energy spectra produced by (α, n) reactions. Legacy tools like SOURCES-4C remain widely used despite significant limitations, including outdated nuclear data, missing target nuclides, and restricted accessibility. Here, we present ALPHANSO, an open-source Python package for calculating (α, n) neutron source terms. ALPHANSO incorporates modern nuclear data libraries and formats covering all naturally occurring target nuclides and provides a transparent, modular framework for updating or extending the data as new evaluations are released. Comparison with an updated version of SOURCES-4A, NeuCBOT, and experimental measurements across a range of elements and materials shows that ALPHANSO reproduces neutron yields and spectra in good agreement with experimental data and state-of-the-art (α, n) calculations. These results demonstrate that ALPHANSO is a reliable, accessible, and modern alternative to legacy (α, n) source term codes such as SOURCES-4C. Its open-source design and modular data handling make it readily extensible to future evaluated nuclear data and low-background applications.

(α, n) reactions↗
DOE OSTI2021

Distributed Thermal Response Multi-Source Modeling to Evaluate Heterogeneous Subsurface Properties

A thorough assessment of thermal properties in heterogeneous subsurface is necessary in design of low-temperature borehole heat exchangers (BHEs). For this study, a distributed thermal response test (DTRT), which combines distributed temperature sensing (DTS) with a conventional thermal response test (TRT), was conducted in a U-bend geothermal loop installed in an open borehole at the University of Illinois at Urbana-Champaign to estimate thermal properties by analyzing the thermal response of different geologic materials while applying a constant heat input rate. Fiber-optic cables in the DTRT were deployed both inside the U-bend geothermal loop and in the center of the borehole to improve the accuracy of calculated heat-loss rates and borehole temperature profile measurements. To assess the subsurface thermal conductivity during the heating phase of the DTRT, a single-source model and a multi-source model, both based on the infinite line source method, were developed using the borehole temperature data and temperatures inside and along the outside of the loop, separately. The two models returned similar thermal conductivity values. The multi-source modeling has the advantage of predicting the thermal conductivity of heterogeneous geologic materials from borehole temperature profiles during the DTRT heating phase. Additionally, based on the distributed thermal conductivity measured in the borehole, estimates were made for both radial thermal impacts and the rate of heat loss in the BHE.

58 GEOSCIENCES↗
NASA NTRS2002

Prediction of the Acoustic Field Associated with Instability Wave Source Model for a Compressible Jet

This paper provides preliminary results of the study of the acoustic radiation from the source model representing spatially-growing instability waves in a round jet at high speeds. The source model is briefly discussed first followed by the analysis of the produced acoustic directivity pattern. Two integral surface techniques are discussed and compared for prediction of the jet acoustic radiation field.

Golubev, Vladimir↗
NASA NTRS1985

An improved source model for aircraft interior noise studies

There is concern that advanced turboprop engines currently being developed may produce excessive aircraft cabin noise levels. This concern has stimulated renewed interest in developing aircraft interior noise reduction methods that do not significantly increase take off weight. An existing analytical model for noise transmission into aircraft cabins was utilized to investigate the behavior of an improved propeller source model for use in aircraft interior noise studies. The new source model, a virtually rotating dipole, is shown to adequately match measured fuselage sound pressure distributions, including the correct phase relationships, for published data. The virtually rotating dipole is used to study the sensitivity of synchrophasing effectiveness to the fuselage sound pressure trace velocity distribution. Results of calculations are presented which reveal the importance of correctly modeling the surface pressure phase relations in synchrophasing and other aircraft interior noise studies.

Mahan, J. R.↗
NASA NTRS1985

An improved source model for aircraft interior noise studies

There is concern that advanced turboprop engines currently being developed may produce excessive aircraft cabin noise level. This concern has stimulated renewed interest in developing aircraft interior noise reduction methods that do not significnatly increase take off weight. An existing analytical model for noise transmission into aircraft cabins was utilized to investigate the behavior of an improved propeller source model for use in aircraft interior noise studies. The new source model, a virtually rotating dipole, is shown to adequately match measured fuselage sound pressure distributions, including the correct phase relationships, for published data. The virtually rotating dipole is used to study the sensitivity of synchrophasing effectiveness to the fuselage sound pressure trace velocity distribution. Results of calculations are presented which reveal the importance of correctly modeling the surface pressure phase relations in synchrophasing and other aircraft interior noise studies.

Mahan, J. R.↗
DOE OSTI2021

Empirical Acoustic Source Model for Chemical Explosions in Air

Chemical explosions generate pressure disturbances in air that radiate as nonlinear shock waves near the source and transition into acoustic waves with distance. Because low-frequency acoustic waves generally travel large distances without significant loss of energy, they are often used for explosion monitoring and yield estimation. However, quantitative relationships between acoustic energy and explosion yields are required for accurate yield estimation. Here, we develop an empirical acoustic source model for chemical explosions from experimental data. The empirical model returns the acoustic pressure waveform for the detonation of 1 kg of trinitrotoluene, which is conventionally used to represent the explosive release of 4.184 MJ of explosion energy. The full-waveform model can be used to predict acoustic signals for an arbitrary yield of a high-explosive detonation based on the standard scaling law and to estimate acoustic energies in a specific frequency range. We evaluate the accuracy of the acoustic source model independently by estimating the yield of other explosive events that are not included in the model development. Finally, statistical characteristics of the model and their implications for the uncertainty quantification of estimated yields are discussed.

58 GEOSCIENCES↗
DOE OSTI2024

A Gaussian Process-Based extended Goldak heat source model for finite element simulation of laser powder bed fusion additive manufacturing process

In this study, laser powder bed fusion (L-PBF) additive manufacturing (AM) is a key enabling technology to manufacture highly complex and integrated metallic structures. In L-PBF AM process, the melting of the metal powders and the layers underneath can be governed by either “conduction mode” or “keyhole mode”, with the keyhole mode reportedly leading to porosity and decreased strength and ductility by many studies. In part scale simulations, finite element (FE) model is often used to study the temperature distribution during printing and to predict the residual stress, where a volumetric heat flux with a Gaussian or a double ellipsoidal (Goldak) distribution is often applied as the laser heat source. However, the above heat source models can only capture the melt pool shape in the conduction mode, and fail to capture the transition to keyhole melting mode when the process parameters change. To overcome this inaccuracy, an extended Goldak heat source model is proposed by introducing a laser penetration term as a function of laser parameters obtained from a Gaussian-Process (GP) model. The model is validated by “2D pad” AlSi10Mg L-PBF experiments under a wide range of laser power, scan speed, and laser focus offset, and the results show the model successfully captures the measured melt pool shape in all conditions.

36 MATERIALS SCIENCE↗