Results for “source selection”

DOE OSTI2025

SITCOMTN-163: Source Selection for Abell 360 in LSSTComCam Data Preview 1

We cover the source selection done for the Abell 360 LSSTComCam cluster study focusing on color and photo-z cuts. Identification of cluster members via the red sequence and photo-z offers a science focused validation of photometry with LSSTComCam. We are able to cross-match with DESI spectroscopic redshifts to offer an independent validation suite on photo-z estimates. We make various color and photo-z cuts to generate N(z)s and shear profiles. We find that both cuts are quite robust to various choices made and can produce a shear profile for Abell 360. Both methods should be applicable to generating a consistent mass estimate for the cluster.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

A study on the clustering properties of radio-selected sources in the Lockman Hole region at 325 MHz

Studying the spatial distribution of extragalactic source populations is vital in understanding the matter distribution in the Universe. It also enables understanding the cosmological evolution of dark matter density fields and the relationship between dark matter and luminous matter. Clustering studies are also required for EoR foreground studies since it affects the relevant angular scales. This paper investigates the angular and spatial clustering properties and the bias parameter of radio-selected sources in the Lockman Hole field at 325 MHz. The data probes sources with fluxes ≳0.3 mJy within a radius of 1.8° around the phase centre of a 6° × 6° mosaic. Based on their radio luminosity, the sources are classified into Active Galactic Nuclei (AGNs) and Star-Forming Galaxies (SFGs). Clustering and bias parameters are determined for the combined populations and the classified sources. The spatial correlation length and the bias of AGNs are greater than SFGs- indicating that more massive haloes host the former. This study is the first reported estimate of the clustering property of sources at 325 MHz, intermediate between the pre-existing studies at high and low-frequency bands. It also probes a well-studied deep field at an unexplored frequency with moderate depth and area. Clustering studies require such observations along different lines of sight, with various fields and data sets across frequencies to avoid cosmic variance and systematics. Thus, an extragalactic deep field has been studied in this work to contribute to this knowledge.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2015

Source Selection Optimization

Explore the source record for details and available documents.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2017

Thermo-Responsive Polymers-Based on Source-Selective Lignins

In this study, thermomechanical properties of hardwood and softwood lignin-nitrile butadiene rubber composites were controlled by a thermal annealing process. The presence of thermally unstable linkages within the selected lignins provides free radical sources for crosslinking reactions. The measured dynamic mechanical properties demonstrated substantial improvement in glass transition temperatures (Tg) and storage moduli (E’) of 50 wt. % softwood lignin- and 50 wt. % hardwood lignin-rubber composites after thermal annealing at 180°C. An increase in Tg of approximately 18°C and more than 230% increasing E’ was achieved after annealing the 50 wt. % hardwood lignin-rubber for 5 h. The chemical crosslinking reactions between lignin-nitrile butadiene rubber and lignin-lignin were characterized by in-situ dynamic mechanical analysis and Fourier transform infrared (FTIR) spectroscopy. A mechanism of crosslinking reactions was revealed.

Nguyen, Ngoc A.↗

DOE OSTI2019

LANL NPB Project: Ion Source Selection and Development Path

The ORNL team will provide LANL with a scoping / feasibility study of H - sources which could potentially be developed to approach the goal of producing a single high-duty-factor H - beam of up to ~100 mA suitable for acceleration by an RFQ. Currently, no existing H - sources have been shown to operate anywhere near this goal so the study will focus on identifying the most promising approach and define the existing option space. Attention will be given to source concepts which are most likely to be scalable to continuous beam operation while offering lower-risk, lower duty-factor or beam current operation in the shorter term. The study will discuss the technology within this option space, tradeoffs and identify the best path forward. Once the best option is identified, an estimate of the expected output emittance, beam current, achievable beam duty-factor, hydrogen and cesium consumption rates, physical size and weight estimates of the source and supporting subsystems will be provided. This work will lay the foundation for developing a conceptual source design in Development 2 which will inform an actual mechanical design that will be used to either construct a prototype source or modify an existing source as part of a future technology development program for the project. The relative technology development risk and mitigations would also be defined for the candidate ion source technologies for a TRL 5 demonstration. Risk analysis for later TRL 6 phases and beyond would be part of a later phase of the project.

43 PARTICLE ACCELERATORS↗

DOE OSTI2023

The miniJPAS survey: AGN and host galaxy coevolution of X-ray-selected sources

Studies indicate strong evidence of a scaling relation in the local Universe between the supermassive black hole mass (MBH) and the stellar mass of their host galaxies (M * ). They even show similar histories across cosmic times of their differential terms: the star formation rate (SFR) and black hole accretion rate (BHAR). However, a clear picture of this coevolution is far from being understood. We selected an X-ray sample of active galactic nuclei (AGN) up to z = 2.5 in the miniJPAS footprint. Their X-ray to infrared spectral energy distributions (SEDs) have been modeled with the CIGALE code, constraining the emission to 68 bands, from which 54 are the narrow filters from the miniJPAS survey. For a final sample of 308 galaxies, we derived their physical properties, such as their M * , SFR, star formation history (SFH), and the luminosity produced by the accretion process of the central BH (L AGN ). For a subsample of 113 sources, we also fit their optical spectra to obtain the gas velocity dispersion from the broad emission lines and estimated the M BH . We calculated the BHAR in physical units depending on two radiative efficiency regimes. We find that the Eddington ratios (λ Edd ) and its popular proxy (L X /M * ) have a difference of 0.6 dex, on average, and a KS test indicates that they come from different distributions. Our sources exhibit a considerable scatter on the MBH - M * scaling relation, which can explain the difference between λ Edd and its proxy. We also modeled three evolution scenarios for each source to recover the integral properties at z = 0. Using the SFR and BHAR, we show a notable diminution in the scattering between MBH - M * . For the last scenario, we considered the SFH and a simple energy budget for the AGN accretion, and we retrieved a relation similar to the calibrations known for the local Universe. Our study covers ~1 deg 2 in the sky and is sensitive to biases in luminosity. Nevertheless, we show that, for bright sources, the link between the differential values (SFR and BHAR) and their decoupling based on an energy limit is the key that leads to the local M BH - M * scaling relation. In the future, we plan to extend this methodology to a thousand degrees of the sky using JPAS with an X-ray selection from eROSITA, to obtain an unbiased distribution of BHAR and Eddington ratios.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

The clustering of Lyman Alpha Emitting galaxies at 𝗓=2–3

Here, we measure the clustering of Lyman Alpha Emitting galaxies (LAEs) selected from the One-hundred-square-degree DECam Imaging in Narrowbands (ODIN) survey, with spectroscopic follow-up from Dark Energy Spectroscopic Instrument (DESI). We use DESI spectroscopy to optimize our selection and to constrain the interloper fraction and redshift distribution of our narrow-band selected sources. We select samples of 4000 LAEs at z = 2.45 and 3.1 in 9 sq. deg. centered on the COSMOS field with median Lyα fluxes of ≈ 10 -16 erg s -1 cm -2 . Covariances and cosmological inferences are obtained from a series of mock catalogs built upon high-resolution N-body simulations that match the footprint, number density, redshift distribution and observed clustering of the sample. We find that both samples have a correlation length of r 0 = 3.0 ± 0.2 h -1 Mpc. Within our fiducial cosmology these correspond to 3D number densities of ≈ 10 -3 h 3 Mpc -3 and, from our mock catalogs, biases of 1.7 and 2.0 at z= 2.45 and 3.1, respectively. We discuss the implications of these measurements for the use of LAEs as large-scale structure tracers for high-redshift cosmology.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

Calibration and Data Analysis of a Frequency Selectable Laser Source for CMB Detector Characterization

Cosmic Microwave Background (CMB) experiments study faint radiation left over from the early universe. The CMB was created when the universe became cool enough for light to travel freely through space, and today it gives scientists one of the earliest images of the universe. One important goal of modern CMB experiments is to measure this radiation with higher precision in order to search for evidence that supports the theory of cosmic inflation. To do this, scientists use extremely sensitive detectors that must be calibrated accurately. The Frequency Selectable Laser Source, or FLS, is a new calibration tool that can send selected frequencies to detectors and help measure their response. During my internship, I worked on the FLS after it returned to Fermilab from Chile, where it had been used to characterize detectors at the Simons Observatory. The system came back in parts, so the first part of my project was helping rebuild the optical and mechanical setup. After the system was rebuilt, we performed alignments to maximize the receiver photocurrent. We then collected calibration measurements over different frequency ranges, including 543 GHz to 568 GHz, 740 GHz to 766 GHz, and 60 GHz to 500 GHz. These measurements were used to check waterline calibration and reflectivity features and compare new data with previous data. Another major part of my project was learning Python so I could understand previous analysis code, modify it for new files, and write my own code to compare the mean response between datasets. The results showed that the new data was close to previous measurements and that waterline features near 556 GHz and 752 GHz were found within less than 1.5 GHz of the expected values. I also completed the reflectivity analysis for five prisms in two polarization orientations. In the original orientation, the results were consistent between the five prisms and close to values measured on a different system at the University of Chicago. I then collected a second set of measurements on my own with the polarization of the laser rotated by 90 degrees and compared them with the original data using the same Python workflow. The measured reflectivity increased for all five prisms in the new orientation, showing that the prism reflectivity depends on polarization. Future work will focus on using the FLS to characterize real CMB detectors.

Pumarino, Rafael [Unlisted]↗

DOE OSTI2026

Calibration and Data Analysis of a Frequency Selectable Laser Source for CMB Detector Characterization

Cosmic Microwave Background (CMB) experiments study faint radiation left over from the early universe. The CMB was created when the universe became cool enough for light to travel freely through space, and today it gives scientists one of the earliest images of the universe. One important goal of modern CMB experiments is to measure this radiation with higher precision in order to search for evidence that supports the theory of cosmic inflation. To do this, scientists use extremely sensitive detectors that must be calibrated accurately. The Frequency Selectable Laser Source, or FLS, is a new calibration tool that can send selected frequencies to detectors and help measure their response. During my internship, I worked on the FLS after it returned to Fermilab from Chile, where it had been used to characterize detectors at the Simons Observatory. The system came back in parts, so the first part of my project was helping rebuild the optical and mechanical setup. After the system was rebuilt, we performed alignments to maximize the receiver photocurrent. We then collected calibration measurements over different frequency ranges, including 543 GHz to 568 GHz, 740 GHz to 766 GHz, and 60 GHz to 500 GHz. These measurements were used to check waterline calibration and reflectivity features and compare new data with previous data. Another major part of my project was learning Python so I could understand previous analysis code, modify it for new files, and write my own code to compare the mean response between datasets. The results showed that the new data was close to previous measurements and that waterline features near 556 GHz and 752 GHz were found within less than 1.5 GHz of the expected values. I also completed the reflectivity analysis for five prisms in two polarization orientations. In the original orientation, the results were consistent between the five prisms and close to values measured on a different system at the University of Chicago. I then collected a second set of measurements on my own with the polarization of the laser rotated by 90 degrees and compared them with the original data using the same Python workflow. The measured reflectivity increased for all five prisms in the new orientation, showing that the prism reflectivity depends on polarization. Future work will focus on using the FLS to characterize real CMB detectors.

Pumarino Meza, Rafael [Unlisted, US; Fermilab]↗

DOE OSTI2026

Calibration and Data Analysis of a Frequency Selectable Laser Source for CMB Detector Characterization

Cosmic Microwave Background (CMB) experiments study faint radiation left over from the early universe. The CMB was created when the universe became cool enough for light to travel freely through space, and today it gives scientists one of the earliest images of the universe. One important goal of modern CMB experiments is to measure this radiation with higher precision in order to search for evidence that supports the theory of cosmic inflation. To do this, scientists use extremely sensitive detectors that must be calibrated accurately. The Frequency Selectable Laser Source, or FLS, is a new calibration tool that can send selected frequencies to detectors and help measure their response. During my internship, I worked on the FLS after it returned to Fermilab from Chile, where it had been used to characterize detectors at the Simons Observatory. The system came back in parts, so the first part of my project was helping rebuild the optical and mechanical setup. After the system was rebuilt, we performed alignments to maximize the receiver photocurrent. We then collected calibration measurements over different frequency ranges, including 543 GHz to 568 GHz, 740 GHz to 766 GHz, and 60 GHz to 500 GHz. These measurements were used to check waterline calibration and reflectivity features and compare new data with previous data. Another major part of my project was learning Python so I could understand previous analysis code, modify it for new files, and write my own code to compare the mean response between datasets. The results showed that the new data was close to previous measurements and that waterline features near 556 GHz and 752 GHz were found within less than 1.5 GHz of the expected values. I also completed the reflectivity analysis for five prisms in two polarization orientations. In the original orientation, the results were consistent between the five prisms and close to values measured on a different system at the University of Chicago. I then collected a second set of measurements on my own with the polarization of the laser rotated by 90 degrees and compared them with the original data using the same Python workflow. The measured reflectivity increased for all five prisms in the new orientation, showing that the prism reflectivity depends on polarization. Future work will focus on using the FLS to characterize real CMB detectors.

Pumarino Meza, Rafael [Unlisted, US; Fermilab]↗

DOE OSTI2022

Development of an Open-source Alloy Selection and Lifetime Assessment Tool for Structural Components in CSP

Lack of sufficient data on high temperature mechanical and corrosion behavior of structural materials is a huge barrier in the technological maturity of current and future Concentrating Solar Power (CSP) technologies. Rapid development and selection of materials cannot be achieved by expensive and time-consuming acquisition of experimental data. The goal of the proposed work is development of an open-source alloy selection and lifetime prediction tool that will integrate validated physics-based models to describe influence of temperature, alloy composition, environment and component geometry (thickness) on mechanical and corrosion behavior of Ni and Fe-based alloys employed in molten salts/sCO 2 heat exchangers. This one-year project leveraged the extensive dataset on the creep\corrosion behavior of candidate materials generated at ORNL through past projects and input from current collaborations with industrial partners. Based on previous experience and the feedback provided by industry (Brayton Energy and Echogen), three candidate materials of interest, Ni-based alloys 740H, 282 and 625 and application-specific operating conditions (max. temperature of 730 °C and stress of 150 MPa) were identified for the heat exchanger. An extensive corrosion and creep dataset was assimilated for the relevant operating conditions and was supported by detailed characterization of about 100 metallographic cross-sections. The corrosion dataset consisted of scanning electron microscopy images (secondary electron and backscatter electron), measured concentration profiles of alloying elements using energy dispersive X-ray spectroscopy (EDS), widths of denuded zones (dissolution of strengthening phases) and depths of attack in molten KCl-MgCl 2 mixtures using image analyses. The creep dataset comprised of creep rupture data and creep strain curves (for 740H and 282). Coupled thermodynamic-kinetic microstructure-based models were employed to predict the stress-corrosion induced compositional and phase evolutions in the alloy during operation under the identified operating conditions. Reduced order models were developed from advanced physics-based models and were integrated in a user-friendly alloy selection tool. The corrosion model was able to predict the time to a critical Cr concentration at the oxide/alloy interface (chemical lifetime) within ±10% (1 standard deviation) of typical statistical variation in corrosion tests and EDS measurement errors (±0.5 wt%). The initial scope of the project was limited to predict creep rupture times (Larson-Miller parameter). Based on the input provided by industry, the mechanical lifetime of the heat exchanger is governed by accumulated creep strains (2%) rather than creep rupture. To be able to predict the times to specific creep strains, a more extensive creep model development was undertaken largely beyond the initial scope of the project. The continuum damage mechanics creep model was able to predict times to 2% creep strain, t 2% with an accuracy of ±500h. Ultimately, a screening protocol for SiC was generated to demonstrate the pathway for integration of one of the currently immature materials from a commercial adoption standpoint in the current material evaluation tool. The modeling tool developed here is accessible to the science community and stakeholders and lays the foundation for methods that will enable a rapid evaluation of optimum materials for CSP applications and reliable prediction of material degradation thereby considerably reducing operational costs, improving reliability and increasing overhaul intervals. However, the complete potential of such a tool to include a wider range of materials and test conditions can only be realized with a more concentrated combined experimental-characterization-computation effort.

14 SOLAR ENERGY↗

DOE OSTI2026

An upgraded frequency-selectable laser source (FLS) calibrator for CMB bandpass characterization

One of the biggest challenges for Cosmic Microwave Background (CMB) experiments comes from the uncertainty in instrument bandpass calibration. Uncertainties in bandpass can limit foreground removal and spectral fitting, which are critical for inflationary and galaxy cluster measurements. CMB experiments currently use Fourier Transform Spectrometers (FTSes) to measure instrument bandpasses. However, FTS systems are currently systematics-limited, so significant improvements in bandpass measurements require novel calibrators. To this end, we developed a Frequency-selectable Laser Source (FLS) calibrator, which uses a laser with adjustable frequency coupled to a system that allows for laser power attenuation. Following initial testing with the first FLS prototype, we developed an upgraded version of the calibrator with improved performance. We present the upgrades to the FLS calibrator, the characterization of the upgraded calibrator and new laser source, and plans for testing with microwave instruments in the field.

Saunders, Lauren J. [Fermilab] (ORCID:000000016367↗

DOE OSTI2025

Frequency-Selectable Laser Source for Cosmic Microwave Background Experiments

Cosmic Microwave Background (CMB) experiments measure remnant radiation from the early universe and use that data to determine fundamental properties of the universe. We can constrain key parameters, such as \textit{r}, the cosmic tensor-to-scalar ratio, and $N_\text{eff}$, the effective number of relativistic species, by analyzing the CMB power spectra. Improving our measurements of the CMB requires improving our instrument systematics, one of the most important of which is detector bandpass. Current experiments use a Fourier Transform Spectrometer (FTS) to measure bandpass. However, the FTS is systematics limited, and cannot achieve the accuracy needed to make improved CMB measurements. For this reason, we are developing a new instrument, the Frequency-Selectable Laser Source (FLS) to decrease the uncertainty in bandpass by an order of magnitude. In this paper, we describe work completed to support the version 2 upgrade to the FLS. Using ray-tracing software, we modeled the FLS optics to set physical tolerances for the new design. We also discuss the laser calibration, and future work to be completed in further development of the FLS upgrade.

Rosen-Turits, Gabriel M. [Fermilab]↗

DOE OSTI2025

Frequency-Selectable Laser Source (FLS) for Cosmic Microwave Background Experiments

Cosmic Microwave Background (CMB) experiments measure remnant radiation from the early universe and use that data to determine fundamental properties of the universe. We can constrain key parameters, such as \textit{r}, the cosmic tensor-to-scalar ratio, and $N_\text{eff}$, the effective number of relativistic species, by analyzing the CMB power spectra. Improving our measurements of the CMB requires improving our instrument systematics, one of the most important of which is detector bandpass. Current experiments use a Fourier Transform Spectrometer (FTS) to measure bandpass. However, the FTS is systematics limited, and cannot achieve the accuracy needed to make improved CMB measurements. For this reason, we are developing a new instrument, the Frequency-Selectable Laser Source (FLS) to decrease the uncertainty in bandpass by an order of magnitude. In this paper, we describe work completed to support the version 2 upgrade to the FLS. Using ray-tracing software, we modeled the FLS optics to set physical tolerances for the new design. We also discuss the laser calibration, and future work to be completed in further development of the FLS upgrade.

Rosen-Turits, Gabriel M.↗

DOE OSTI2025

Frequency-Selectable Laser Source (FLS) Calibrator for CMB Bandpass Characterization

One of the biggest challenges for Cosmic Microwave Background (CMB) experiments comes from our detector bandpass calibration. Uncertainties in bandpass can severely limit our measurements by limiting foreground removal and spectral fitting, which is particularly important for high-$\ell$ observations like cluster science using the Sunyaev-Zeldovich (SZ) effect. Currently, CMB experiments typically use a Fourier Transform Spectrometer (FTS) to measure the detector bandpasses. However, the resolution of the FTS is dependent on the length of the interferometer arms, leading to a need for increasingly large FTS instruments as CMB experiments require tighter constraints on detector bandpasses. Additionally, systematic effects like shifts in bandpass shape from uneven illumination from the FTS further limit the calibration uncertainties. As a complement to the FTS, we have developed a Frequency-selectable Laser Source (FLS) calibrator, which uses a laser with adjustable frequency housed in a calibrator that allows for varying degrees of laser power attenuation. We present several tests used to characterize the first prototype design of the FLS calibrator, as well as the improvements to the calibrator design currently underway.

Saunders, Lauren [Fermilab]↗

DOE OSTI2017

Recommendation of ruthenium source for sludge batch flowsheet studies

Included herein is a preliminary analysis of previously-generated data from sludge batches 7a, 7b, 8, and 9 sludge simulant and real-waste testing, performed to recommend a form of ruthenium for future sludge batch simulant testing under the nitric-formic flowsheet. Focus is given to reactions present in the Sludge Receipt and Adjustment Tank cycle, given that this cycle historically produces the most changes in chemical composition during Chemical Process Cell processing. Data is presented and analyzed for several runs performed under the nitric-formic flowsheet, with consideration given to effects on the production of hydrogen gas, nitrous oxide gas, consumption of formate, conversion of nitrite to nitrate, and the removal and recovery of mercury during processing. Additionally, a brief discussion is given to the effect of ruthenium source selection under the nitric-glycolic flowsheet. An analysis of data generated from scaled demonstration testing, sludge batch 9 qualification testing, and antifoam degradation testing under the nitric-glycolic flowsheet is presented. Experimental parameters of interest under the nitric-glycolic flowsheet include N2O production, glycolate destruction, conversion of glycolate to formate and oxalate, and the conversion of nitrite to nitrate. To date, the number of real-waste experiments that have been performed under the nitric-glycolic flowsheet is insufficient to provide a complete understanding of the effects of ruthenium source selection in simulant experiments with regard to fidelity to real-waste testing. Therefore, a determination of comparability between the two ruthenium sources as employed under the nitric-glycolic flowsheet is made based on available data in order to inform ruthenium source selection for future testing under the nitric-glycolic flowsheet.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

SITCOMTN-161: PSF assessment in the field of Abell 360 and shapeHSM shear profile using LSSTComCam data

The Rubin LSSTComCam on-sky campaign performed at the end of 2024 provided observations of the Abell 360 galaxy cluster; these data allow a preliminary study of cluster weak lensing analysis using Rubin Data Preview 1 (DP1) data. Among all the steps required for such analyses, accurate modeling of the PSF is essential. This work uses several diagnostics, mostly based on the residuals between the second moments of stars and the PSF model, to characterize the accuracy of the PSF modeling in the A360 field. We find the level of the residuals to be sufficiently low not to hinder the measurement of the tangential shear profile around A360. With a simple source selection process, we demonstrate that outputs of the LSST Science Pipelines can be used to detect the tangential shear profile in Abell 360 at the 3.6σ level, and our analysis indicates that contamination from PSF modeling systematics is negligible.

Dell'Antonio, Ian [Brown University]↗

DOE OSTI2025

SITCOMTN-162: Testing the implementation of Metadetection and Cell-Based Coadds on Abell 360 LSSTComCam data

The purpose of this technote is to test the technical quality of LSSTComCam commissioning data, specifically the Rubin_SV_38_7 field, by utilizing cell-based coadds and Metadetection by measuring the tangential and cross weak lensing shear profiles of the massive cluster Abell 360 (called A360 throughout the technote). The process entails generating the cell-based coadds for Metadetection to run on, identifying and removing cluster member galaxies, applying quality cuts, calibrating the shear measurements, and validation. Cell-based coadds and Metadetection are both currently in the process of being implemented within the LSST Science Pipelines at the time of this technote. There is substantial technical value in attempting a difficult measurement prior to full implementation. Measuring the tangential shear around A360 will showcase the current abilities of these algorithms, as well as highlight where work is still needed. As seen from the resulting shear profile of A360, the cell-based coadds and Metadetection are able to work in tandem to produce a shear catalog and resulting reduced shear profile. This technote is one part of a series studying A360 in order to both stress test the commissioning camera and demonstrate the technical capabilities of the Vera Rubin Observatory. We study the quality of the PSF modeling and impact it can have on cluster WL in [Combet et al., 2025], implementation of cell-based coadds and subsequent use for Metadetect [Sheldon et al., 2023] in this technote, photometric calibration in (in prep), source selection and photometric redshifts in [Adari et al., 2025], use of Anacal [Li et al., 2024] to produce a cluster shear profile in [Li et al., 2025], and background subtraction in this field and Fornax in [Zhou et al., 2025].

79 ASTRONOMY AND ASTROPHYSICS↗