Search NASA⌕ Search

SEARCH · Search NASA

Results for “species interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Construction of analytically solvable models for interacting species

The basic form of a model representation for systems of n interacting biological species is a set of essentially nonlinear autonomous ordinary differential equations. A generic canonical expression for the rate functions in the equations is reported which permits the analytical general solution to be obtained by elementary computation. It is shown that a general analytical solution is directly obtainable for models where the rate functions are prescribed by the generic canonical expression from the outset. Some illustrative examples are given which demonstrate that the generic canonical expression can be used to construct analytically solvable models for two interacting species with limit-cycle dynamics as well as for a three-species interdependence.

Rosen, G.↗

Next-generation wildlife tracking devices and integrated sensors for measuring species-environment interactions and advancing conservation

Global land use and climate change have magnified the importance of collecting accurate animal movement and environmental data to improve our ability to model species interactions with the environment and promote effective conservation. Advanced animal tracking devices that couple cutting-edge technologies with our expanding need for ecological information is critical. In addition to further optimizing device size to monitor small, sensitive species, new paradigms for collecting, storing, and transmitting data about animals and their environments will propel wildlife tracking devices forward. Advanced telemetry capabilities will increase our ability to pair location and sensor data from tagged wildlife with remote sensing data. The USGS Western Ecological Research Center, NASA Ames Research Center, and collaborators have been developing new wildlife tracking devices and integrated environmental sensors to address these challenges. We describe a new, miniaturized solar GPS-enabled Globalstar satellite transmitter with accelerometer capability that is 20% lighter and 25% less expensive than existing commercially available tags. We also introduce a novel peer-to-peer, solar-powered network tag that uses long-range, low-power, wireless platform technology. Concurrently, we began adapting a carbon nanotube (CNT) sensor to detect dimethyl sulfide (DMS), a trace gas relevant to marine ecology and climate studies. CNT sensors offer a small, lightweight, and low-power technology that can detect changes in resistance across carbon nanotubes coated with adsorbent selected to specifically bind with a variety of reactive trace gasses. We flew a prototype sensor in a small UAS and sampled an apparent increase in DMS concentration consistent with a well-defined marine frontal boundary. Currently we are integrating project components to create a hybridized architecture of networked peer-to-peer and satellite tags with integrated CNT and additional on-board and remote sensors to advance animal tracking and to provide information for next generation wildlife conservation.

Ian G. Brosnan↗

Importance of Tree- and Species-Level Interactions With Wildfire, Climate, and Soils in Interior Alaska: Implications for Forest Change Under A Warming Climate

The boreal zone of Alaska is dominated by interactions between disturbances, vegetation, and soils. These interactions are likely to change in the future through increasing permafrost thaw, more frequent and intense wildfires, and vegetation change from drought and competition. We utilize an individual tree-based vegetation model, the University of Virginia Forest Model Enhanced (UVAFME), to estimate current and future forest conditions across sites within interior Alaska. We updated UVAFME for application within interior Alaska, including improved simulation of permafrost dynamics, litter decay, nutrient dynamics, fire mortality, and post-fire regrowth. Following these updates, UVAFME output on species-specific biomass and stem density was comparable to inventory measurements at various forest types within interior Alaska. We then simulated forest response to climate change at specific inventory locations and across the Tanana Valley River Basin on a 2 × 2 km2 grid. We derived projected temperature and precipitation from a five-model average taken from the CMIP5 archive under the RCP 4.5 and 8.5 scenarios. Results suggest that climate change and the concomitant impacts on wildfire and permafrost dynamics will result in overall decreases in biomass (particularly for spruce (Picea spp.)) within the interior Tanana Valley, despite increases in quaking aspen (Populus tremuloides) biomass, and a resulting shift towards higher deciduous fraction. Simulation results also predict increases in biomass at cold, wet locations and at high elevations, and decreases in biomass in dry locations, under both moderate (RCP 4.5) and extreme (RCP 8.5) climate change scenarios. These simulations demonstrate that a highly detailed, species interactive model can be used across a large region within Alaska to investigate interactions between vegetation, climate, wildfire, and permafrost. The vegetation changes predicted here have the capacity to feed back to broader scale climate-forest interactions in the North American boreal forest, a region which contributes significantly to the global carbon and energy budgets.

forest modeling↗

Remote sensing analysis of Lake Livingston aquatic plants

Results obtained during 1975 to monitor the growth of aquatic plants in the Lake Livingston area, using remote sensing photographic imagery, were described. Sequential total coverage was provided of the Jungle and White Rock Creek, plus coverage of smaller areas of localized infestation downlake, including Brushy Creek, KOA Kampground Marina, Penwaugh Slough, Memorial Point Marina, the Beacon Bay marinas and Pine Island. The imagery was generally good, photographic exposure being increased as the season progressed in order to obtain better pictures of the submerged vegetation. Some very significant differences in growth patterns, species interaction, and species dominance were observed when compared to 1974. Observation of the following plants was discussed: water hyacinth, hydrilla, coontail, potamageton. In general, the level of infestation was lower in 1975 than in 1974, due to the combined effect of more systematic application of herbicides and harsher intervening winter weather conditions.

Benton, A. R., Jr.↗

Relating FTS Catalyst Properties to Performance

During the reporting period June 23, 2011 to August 31, 2013, CAER researchers carried out research in two areas of fundamental importance to the topic of cobalt-based Fischer-Tropsch Synthesis (FTS): promoters and stability. The first area was research into possible substitute promoters that might be used to replace the expensive promoters (e.g., Pt, Re, and Ru) that are commonly used. To that end, three separate investigations were carried out. Due to the strong support interaction of γ-Al2O3 with cobalt, metal promoters are commonly added to commercial FTS catalysts to facilitate the reduction of cobalt oxides and thereby boost active surface cobalt metal sites. To date, the metal promoters examined have been those up to and including Group 11. Because two Group 11 promoters (i.e., Ag and Au) were identified to exhibit positive impacts on conversion, selectivity, or both, research was undertaken to explore metals in Groups 12 - 14. The three metals selected for this purpose were Cd, In, and Sn. At a higher loading of 25%Co on alumina, 1% addition of Cd, In, or Sn was found to-on average-facilitate reduction by promoting a heterogeneous distribution of cobalt consisting of larger lesser interacting cobalt clusters and smaller strongly interacting cobalt species. The lesser interacting species were identified in TPR profiles, where a sharp low temperature peak occurred for the reduction of larger, weakly interacting, CoO species. In XANES, the Cd, In, and Sn promoters were found to exist as oxides, whereas typical promoters (e.g., Re, Ru, Pt) were previously determined to exist in an metallic state in atomic coordination with cobalt. The larger cobalt clusters significantly decreased the active site density relative to the unpromoted 25%Co/Al2O3 catalyst. Decreasing the cobalt loading to 15%Co eliminated the large non-interacting species. The TPR peak for reduction of strongly interacting CoO in the Cd promoted catalyst occurred at a measurably lower temperature than in the unpromoted catalyst. Nevertheless, the Co clusters remained slightly larger, on average, in comparison with the unpromoted 15%Co/Al2O3 reference catalyst. None of the promoted catalysts (i.e., with Cd, In, or Sn) exhibited surface Co0 site densities higher than that of the unpromoted catalyst. In activity testing, the activities were even much lower than what was expected from the H2-TPD results. Two possible explanations were proposed: (1) the promoters may be located on the surfaces of cobalt particles, blocking surface Co0 but being able to desorb hydrogen or (2) the promoters may facilitate Co oxidation during FTS, as previously observed by Huffman and coworkers when K was added to cobalt catalysts.

Zirconia↗

Diagnostics Adapted for Heat-Treating Furnace Environment

Diagnostics developed for the in situ monitoring of rocket combustion environments were adapted for use in heat-treating furnaces. Simultaneous, in situ monitoring of the carbon monoxide, carbon dioxide, methane, water, and hydrogen concentrations in the endothermic gas of a heat-treating furnace were demonstrated under a Space Act Agreement between the NASA Lewis Research Center, the Heat Treating Network, and Akron Steel Treating Company. This endothermic gas, or "endogas," is produced in a catalytic process, where natural gas is "cracked" in the presence of air. Variations in the composition of the natural gas supplied lead to variations in the composition of the endothermic gas. These variations could lead to an unacceptable quality of steel products that are hardened through the carborization process that uses this gas. Conventional methods of monitoring the endogas include measuring the dew point of the gas and the oxygen concentration. From these data, the carbon monoxide content of the gas can be calculated. This carbon monoxide concentration creates the carbon potential needed for carburization. Several weak links are present in this approach. The oxygen monitor deteriorates over time, and the measurement might be inaccurate by 50 percent. Also, the chemistry equations, which are based on several assumptions, such as secondary species concentrations, provide only an approximate estimate of the carbon monoxide concentration. To address these weaknesses, we investigated a new method based on ordinary Raman spectroscopy, in which the carbon monoxide concentration is measured directly and in situ. This method measures the laser light scattered from the molecules. Each species interacts with the light and scatters the light at a different frequency. Spectral monitoring of the scattered light intensity at each molecular frequency of interest provides the species concentrations. One advantage over the conventional method is that several species can be monitored simultaneously. A second advantage is that the measurement is direct; there is no need to make assumptions, to filter the gas, or to calibrate the instrument. An instrument was designed consisting of a laser and a detection system within an enclosure, connected to an optical probe by fibers. For determining carbon monoxide concentration, the probe is mounted on the endothermic gas line, close to the generator. Optical fibers with a length of 150 ft have been used to transmit laser light from the instrument to the probe. There, the light is focused into the gas, and the scattered light is collected and transmitted back to the instrument where it is analyzed with a photomultiplier and lock-in amplifier. Laboratory tests have shown that with the current system the concentration of carbon monoxide, water, nitrogen, oxygen, and hydrogen in the air can be monitored with an accuracy of 1 percent. The concentration of carbon dioxide in the air can be monitored with an accuracy of 0.5 percent, and the concentration of methane with an accuracy of 0.2 percent. This instrument was taken to the Akron Steel Treating Plant, where field tests are in progress to verify the system capabilities. Planned developments are improving the accuracy, monitoring multiple locations, and reducing instrument size and cost.

Source record↗

Second virial coefficients for the polar species in steam.

The potential function parameters to fit the data obtained by Kell et al. (1968) are determined. The data of Kell et al. cover the temperature range from 150 to 450 C. Data for the temperature range from 500 to 1000 C are from Sugaware et al. (1964). These calculations have been extended to include OH-OH and OH-H2O pairwise interactions. For the latter interaction the formalism was extended to the case of unequal dipole quadrupole moments in the potential function for the interacting species.

Kubin, R. F.↗

The behaviour of minor species in the solar wind

The flow of minor species in the solar wind is considered on the basis of a model in which all species are heated in an arbitrary manner as they leave the sun and the minor species interact with the background proton-electron plasma through the radial electric field associated with the latter and by means of Coulomb collisions. In order to produce satisfactory results in which the ions all move at more or less the same speed at the orbit of the earth, it is necessary to introduce heating functions such that each species is given energy in proportion to its mass. Coulomb collisions are found to be important as a means of removing energy from the heavier species close to the sun and bringing all species closer to thermal equilibrium at great distances from the sun. Substantial velocity differences can occur between species, especially close to the sun. Furthermore it is not difficult to construct solutions in which the bulk velocity of the helium ions exceeds that of the solar wind, as is often observed.

Ryan, J. M.↗

Interactions of Hydrazine and Blowby Gases

The interactions between hydrazine and blowby gases from pyrovalves was explored in this research project. Investigating the decomposition chemistry of hydrazine through detailed chemical kinetic modeling is a project started last summer while participating in the Summer Faculty Fellowship program. During the 1999-2000 academic year, the chemical kinetic mechanism for hydrazine decomposition developed while a SFF at NASA's White Sands Test Facility was further revised and validated against the limited experimental data in the literature. This mechanism was then used in assessing the effects of blowby gas species on hydrazine decomposition. The combustion products introduced into the fuel line by pyrovalve actuation consist primarily of hydrogen gas. Hydrogen is also a product of the decomposition of hydrazine. Additional gaseous chemical species are introduced into the fuel, as well as metals and metal salts that deposit onto the walls of the fuel line. The deposition process is undoubtedly very rapid, and exothermic. Therefore, the major focus of this summer's work was examining the effects of hydrogen presence on hydrazine decomposition, with some representative calculations including the remaining gaseous species found to exist in blowby gases. Since hydrogen is a product of hydrazine decomposition, all reactions necessary to evaluate its effect on hydrazine decomposition chemistry were in the original mechanism developed. However, the mechanism needed to be considerably expanded to include the reactions of the other gaseous blowby species with hydrazine, all the intermediate species formed in its decomposition, and each other. The expanded mechanism consists of 70 species interacting via a network of 452 reactions. Calculations with molecular hydrogen introduced into hydrazine gas in an inert bath gas indicate that H2 presence as an initial reactant in substantial amounts can dramatically impact the decomposition process for hydrazine. The other gaseous blowby species (CO, CO2, H2O, CH4, O2, and N2) were found to have little effect compared to the inclusion of hydrogen itself as an initial reagent. This result is undoubtedly due, in part, to the fact that the blowby gas used in these calculations consisted of 94.6% H2. A more rigorous examination of the behavior of the full detailed mechanism under a variety of conditions was not performed.

Meagher, Nancy E.↗

Simplified Modeling of Oxidation of Hydrocarbons

A method of simplified computational modeling of oxidation of hydrocarbons is undergoing development. This is one of several developments needed to enable accurate computational simulation of turbulent, chemically reacting flows. At present, accurate computational simulation of such flows is difficult or impossible in most cases because (1) the numbers of grid points needed for adequate spatial resolution of turbulent flows in realistically complex geometries are beyond the capabilities of typical supercomputers now in use and (2) the combustion of typical hydrocarbons proceeds through decomposition into hundreds of molecular species interacting through thousands of reactions. Hence, the combination of detailed reaction- rate models with the fundamental flow equations yields flow models that are computationally prohibitive. Hence, further, a reduction of at least an order of magnitude in the dimension of reaction kinetics is one of the prerequisites for feasibility of computational simulation of turbulent, chemically reacting flows. In the present method of simplified modeling, all molecular species involved in the oxidation of hydrocarbons are classified as either light or heavy; heavy molecules are those having 3 or more carbon atoms. The light molecules are not subject to meaningful decomposition, and the heavy molecules are considered to decompose into only 13 specified constituent radicals, a few of which are listed in the table. One constructs a reduced-order model, suitable for use in estimating the release of heat and the evolution of temperature in combustion, from a base comprising the 13 constituent radicals plus a total of 26 other species that include the light molecules and related light free radicals. Then rather than following all possible species through their reaction coordinates, one follows only the reduced set of reaction coordinates of the base. The behavior of the base was examined in test computational simulations of the combustion of heptane in a stirred reactor at various initial pressures ranging from 0.1 to 6 MPa. Most of the simulations were performed for stoichiometric mixtures; some were performed for fuel/oxygen mole ratios of 1/2 and 2.

Bellan, Josette↗

Self-consistent solar wind-LISM interaction including neutrals: A 4-fluid model

We investigate the interaction between the heliosphere and local interstellar medium, including charge-exchange self-consistently between the neutral and ionized components. The system is modelled as consisting of neutral hydrogen, protons and electrons. The electrons are assumed to contribute to the dynamics via a pressure that is everywhere equal to the proton pressure. The fluid equations for the protons and hydrogen are solved self-consistently, assuming the two species interact only via charge exchange. The protons are treated as a single isotropic fluid. The hydrogen is decomposed into three isotropic fluids: hydrogen of interstellar origin with characteristic temperature of approximately 104 K, hydrogen produced via charge exchange in the post-shock solar wind, with characteristic temperature of approximately 105 K, and hydrogen produced via charge exchange in the supersonic solar wind, relatively cool but expanding radially outward with the solar wind speed. Two-Dimensional time-dependent numerical simulations of this system are performed to calculate the number density, temperature and bulk velocity of neutral hydrogen and plasma everywhere in the heliosphere. These quantities are compared to relevant solar wind observations. Implications for the pick-up process in the supersonic solar wind, as well as heating and deceleration of the wind, are addressed.

Williams, L. L.↗

Beam-foil-gas spectroscopy - A technique for studying steady-state non-equilibrium processes.

When a thin foil is inserted in the beam of a beam-gas experiment, the beam particle state populations are driven far from their beam-gas equilibrium values. Downstream from the foil, the 'new beam' and gas species interact to produce a new equilibrium, usually different from the beam-gas equilibrium. Experimental results are presented to demonstrate this effect and to show how relative cross-section measurements can be used to study the beam-foil interaction.

Bickel, W. S.↗

Monte Carlo analysis of uncertainty propagation in a stratospheric model. 1: Development of a concise stratospheric model

A concise model has been developed to analyze uncertainties in stratospheric perturbations, yet uses a minimum of computer time and is complete enough to represent the results of more complex models. The steady state model applies iteration to achieve coupling between interacting species. The species are determined from diffusion equations with appropriate sources and sinks. Diurnal effects due to chlorine nitrate formation are accounted for by analytic approximation. The model has been used to evaluate steady state perturbations due to injections of chlorine and NO(X).

Rundel, R. D.↗

Uncertainty propagation in a stratospheric model. I - Development of a concise stratospheric model. II - Monte Carlo analysis of imprecisions due to reaction rates

The paper discusses the development of a concise stratospheric model which uses iteration to obtain coupling between interacting species. The one-dimensional, steady-state, diurnally-averaged model generates diffusion equations with appropriate sources and sinks for species odd oxygen, H2O, H2, CO, N2O, odd nitrogen, CH4, CH3Cl, CCl4, CF2Cl2, CFCl3, and odd chlorine. The model evaluates steady-state perturbations caused by injections of chlorine and NO(x) and may be used to predict ozone depletion. The model is used in a Monte Carlo study of the propagation of reaction-rate imprecisions by calculating an ozone perturbation caused by the addition of chlorine. Since the model is sensitive to only 10 of the more than 50 reaction rates considered, only about 1000 Monte Carlo cases are required to span the space of possible results.

Rundel, R. D.↗

Transport equations for multicomponent anisotropic space plasmas - A review

An attempt is made to present a unified approach to the study of transport phenomena in multicomponent anisotropic space plasmas. In particular, a system of generalized transport equations is presented that can be applied to widely different plasma flow conditions. The generalized transport equations can describe subsonic and supersonic flows, collision-dominated and collisionless flows, plasma flows in rapidly changing magnetic field configurations, multicomponent plasma flows with large temperature differences between the interacting species, and plasma flows that contain anisotropic temperature distributions. In addition, if Maxwell's equations of electricity and magnetism are added to the system of transport equations, they can be used to model electrostatic shocks, double layers, and magnetic merging processes. These transport equations also contain terms which act to regulate both the heat flow and temperature anisotropy, processes which appear to be operating in the solar wind.

Barakat, A. R.↗

Inverse Bremsstrahlung in Shocked Astrophysical Plasmas

There has recently been interest in the role of inverse bremsstrahlung, the emission of photons by fast suprathermal ions in collisions with ambient electrons possessing relatively low velocities, in tenuous plasmas in various astrophysical contexts. This follows a long hiatus in the application of suprathermal ion bremsstrahlung to astrophysical models since the early 1970s. The potential importance of inverse bremsstrahlung relative to normal bremsstrahlung, i.e. where ions are at rest, hinges upon the underlying velocity distributions of the interacting species. In this paper, we identify the conditions under which the inverse bremsstrahlung emissivity is significant relative to that for normal bremsstrahlung in shocked astrophysical plasmas. We determine that, since both observational and theoretical evidence favors electron temperatures almost comparable to, and certainly not very deficient relative to proton temperatures in shocked plasmas, these environments generally render inverse bremsstrahlung at best a minor contributor to the overall emission. Hence inverse bremsstrahlung can be safely neglected in most models invoking shock acceleration in discrete sources such as supernova remnants. However, on scales approximately > 100 pc distant from these sources, Coulomb collisional losses can deplete the cosmic ray electrons, rendering inverse bremsstrahlung, and perhaps bremsstrahlung from knock-on electrons, possibly detectable.

Baring, Matthew G.↗