Search NASA⌕ Search

SEARCH · Search NASA

Results for “spectral emissivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Spectral emission characteristics near 646 nm and plasma properties of laser-induced plasma of gaseous uranium hexafluoride

We present a detailed investigation of the temporal evolution of line and continuum emissions in laser-induced breakdown spectroscopy (LIBS) of gaseous uranium hexafluoride (UF 6 ), focusing on the spectral region near 646 nm. Spectral emission features, signal-to-background ratios (SBRs) of selected uranium lines, and spectral linewidths were examined under varying UF 6 pressures (15–60 Torr) and laser pulse energies (10–60 mJ). Higher pressures and pulse energies enhanced continuum emission and reduced SBRs but did not cause significant spectral congestion. Additional studies with the use of different laser systems, including nanosecond-pulsed Nd:YAG lasers (at fundamental and various harmonics) and a femtosecond-pulsed Ti:sapphire laser, revealed long-lived plasma continua in all cases. This persistent continuum is attributed to a pseudo-continuum from overlapping molecular emissions, as its intensity scales linearly with electron number density, deviating from the expected quadratic dependence of classical ion–electron interactions for free-free and free-bound continuum emission. Based on plasma persistence time, SBR, U II/U I intensity ratios, and electronic excitation temperature, no fundamental advantage was found for femtosecond-pulsed lasers over conventional nanosecond-pulsed ones for UF 6 enrichment assay with direct LIBS measurement.

Laser-induced breakdown spectroscopy↗
DOE OSTI2021

Temperature-dependent Spectral Emission of Hexagonal Boron Nitride Quantum Emitters on Conductive and Dielectric Substrates

We report a reduction in the linewidth and suppression of spectral diffusion of quantum emitters in hexagonal boron nitride supported on a conductive substrate. In this work, we observe a temperature-dependent reduction in the spectral emission linewidth for CVD-grown and exfoliated crystals on conductive ITO relative to those seen on silicon dioxide (SiO 2 ) substrates. We show that the inhomogeneous linewidth can be suppressed by 45% as a result of using a conductive substrate. We investigate the zero-phonon line profile at temperatures ranging from 4 to 300 K and decompose the effects of thermal broadening and spectral diffusion at each temperature by Voigt fitting. The temperature dependence of homogeneous and inhomogeneous components of the broadening is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Spectral emission properties of a nitrogen-doped diamond (001) photocathode: Hot electron transport and transverse momentum filtering

The electron emission properties of a single-crystal nitrogen-doped diamond(001) photocathode inserted in a 10 kV DC photoelectron gun are determined using a tunable (235–410 nm) ultraviolet laser radiation source for photoemission from both the back nitrogen-doped substrate face and the front homoepitaxially grown and undoped diamond crystal face. Here, the measured spectral trends of the mean transverse energy and quantum efficiency of the emitted electrons are both anomalous and nonmonotonic, but are shown to be consistent with (i) the known physics of electron photoexcitation from the nitrogen substitution states into the conduction bands of diamond, (ii) the energy position and dispersion characteristics of the conduction bands of diamond in the (001) emission direction, (iii) the effective electron affinity of the crystal faces, (iv) the strong electron-(optical)phonon coupling in diamond, and (v) the associated hot electron transport dynamics under energy equipartition with the optical phonons. Notably, the observed hot electron emission is shown to be restricted parallel to the photocathode surface by the low transverse effective masses of the emitting band states—a transverse momentum filtering effect.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Inverse Design of Photonic Surfaces via High throughput Femtosecond Laser Processing and Tandem Neural Networks

Abstract This work demonstrates a method to design photonic surfaces by combining femtosecond laser processing with the inverse design capabilities of tandem neural networks that directly link laser fabrication parameters to their resulting textured substrate optical properties. High throughput fabrication and characterization platforms are developed that generate a dataset comprising 35280 unique microtextured surfaces on stainless steel with corresponding measured spectral emissivities. The trained model utilizes the nonlinear one‐to‐many mapping between spectral emissivity and laser parameters. Consequently, it generates predominantly novel designs, which reproduce the full range of spectral emissivities (average root‐mean‐squared‐error < 2.5%) using only a compact region of laser parameter space 25 times smaller than what is represented in the training data. Finally, the inverse design model is experimentally validated on a thermophotovoltaic emitter design application. By synergizing laser‐matter interactions with neural network capabilities, the approach offers insights into accelerating the discovery of photonic surfaces, advancing energy harvesting technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Inverse design of photonic surfaces via multi fidelity ensemble framework and femtosecond laser processing

We demonstrate a multi-fidelity (MF) machine learning ensemble framework for the inverse design of photonic surfaces, trained on a dataset of 11,759 samples that we fabricate using high throughput femtosecond laser processing. The MF ensemble combines an initial low fidelity model for generating design solutions, with a high fidelity model that refines these solutions through local optimization. The combined MF ensemble can generate multiple disparate sets of laser-processing parameters that can each produce the same target input spectral emissivity with high accuracy (root mean squared errors < 2%). SHapley Additive exPlanations analysis shows transparent model interpretability of the complex relationship between laser parameters and spectral emissivity. Finally, the MF ensemble is experimentally validated by fabricating and evaluating photonic surface designs that it generates for improved efficiency energy harvesting devices. Our approach provides a powerful tool for advancing the inverse design of photonic surfaces in energy harvesting applications.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Self-radiography of imploded shells on OMEGA based on additive-free multi-monochromatic continuum spectral analysis

Radiographs of pure-DT cryogenic imploding shells provide critical validation of progress toward ignition-scalable performance of inertial confinement fusion implosions. Cryogenic implosions on the OMEGA Laser System can be self-radiographed by their own core spectral emission near ≈2 keV. Utilizing the distinct spectral dependences of continuum emissivity and opacity, the projected optical-thickness distribution of imploded shells, i.e., the shell radiograph, can be distinguished from the structure of the core emission distribution in images.Importantly, this can be done without relying on spectral additives (shell dopants), as in previous applications of implosion self-radiography. Furthermore, demonstrations with simulated data show that this technique is remarkably well-suited to cryogenic implosions and can also be applied to self-radiography of imploded room-temperature CH shells at higher spectral energy (hv ≈ 3–5 keV) based on the very similar continuum spectrum of carbon. Experimental demonstration of additive-free self-radiography with warm CH shell implosions on OMEGA will provide an important proof of principle for future applications to cryogenic DT implosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Establishing temperature from radiance of dynamically compressed metals

Precise temperature determination is a significant challenge in extreme environments of dynamic compression studies. How can radiance measurements taken in high-pressure shock experiments constrain temperature in a meaningful and physically consistent way? Experiments maintaining sample compression against a transparent window can be tailored to present a uniform measurement area with uncertain spectral emissivity. We compare several methods to analyze radiance collected at multiple wavelengths, applying statistical methods and physical principles to improve temperature inference. With proper radiance collection and analysis, dynamic temperature uncertainties become comparable to thermomechanical ambiguities of the emitting surface.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Intrinsic emittance properties of an Fe-doped β-Ga 2 O 3 (010) photocathode: Ultracold electron emission at 300 K and the polaron self-energy

Measurements of the spectral emission properties of an iron-doped a β-Ga 2 O 3 (010) photocathode at 300 K reveal the presence of an ultracold contribution to the total electron beam emission with a 6 meV mean transverse energy (MTE) in the 3.5–4.4 eV photon energy range (282–354 nm). This extreme sub-thermal photoemission signal is consistent with direct emission of electrons photoexcited from the Fe dopant states into the low effective mass and positive electron affinity primary conduction band, and it is superimposed on a stronger signal with a larger MTE associated with an (optical)phonon-mediated momentum-resonant Franck–Condon (FC) emission process from a thermally populated and negative electron affinity upper conduction band. For photon energies above 4.5 eV, a transition from a long to a short transport regime is forced by an absorption depth reduction to below 100 nm and both MTE signals exhibit spectral trends consistent with phonon-mediated FC emission if the polaron formation self-energy is included in the temperature of the initial thermalized photoexcited electron distribution.

Angeloni, Louis A. [University of Illinois, Chicag↗
DOE OSTI2025

Emission properties of a hybrid metallized diamond(001) photocathode

The spectral emission characteristics of a proof-of-concept hybrid metallized diamond(001) photocathode are presented. The quantum efficiency (QE) is shown to be determined by the photoinjection efficiency across the ohmic contact at the back metallized face, whereas the mean transverse energy (MTE) of the photoemitted electrons is consistent with an (optical)phonon-assisted and momentum-resonant Franck-Condon mechanism [Franck-Condon electron emission from polar semiconductor photocathodes, Phys. Rev. Appl. 23, 054065 (2025)] following electron drift transport to the untreated diamond(001) front emission face. Emission is observed from both the lower and upper conduction bands of diamond with positive and negative electron affinity, respectively. A potential route to the realization of a red-visible photocathode based on this concept with a sub-50 meV MTE and a QE greater than 0.1% is discussed.

Density of states↗
DOE OSTI2023

Tantalum oxide and nitride spectral features from a laser-produced plasma

Here, we report measurements of time-resolved Ta, TaO and TaN emission spectroscopic signatures from a laser-produced plasma. Plasmas were generated using 1064 nm, 6 ns pulses from an Nd:YAG laser focused onto a pure Ta metal target in a gaseous environment with varying percentages of O 2 /N 2 for controlling gas-phase oxidation/plasma chemistry. Time-resolved analysis showed that Ta oxide emission is prominent at later times in plasma evolution, whereas strong atomic emission is present at early times in air. Emission spectral features as a function of O 2 partial pressure showed that TaO emission intensity increases, while the peak intensity of TaO appears earlier with increasing O 2 availability. We also report emission spectra of TaN, and show that plasma chemistry favors TaO formation instead of TaN when O 2 is present in the environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Investigating the Nature of the Luminous Ambiguous Nuclear Transient ASASSN-17jz

Abstract We present observations of the extremely luminous but ambiguous nuclear transient (ANT) ASASSN-17jz, spanning roughly 1200 days of the object’s evolution. ASASSN-17jz was discovered by the All-Sky Automated Survey for Supernovae (ASAS-SN) in the galaxy SDSS J171955.84+414049.4 on UT 2017 July 27 at a redshift of z = 0.1641. The transient peaked at an absolute B -band magnitude of M B ,peak = −22.81, corresponding to a bolometric luminosity of L bol,peak = 8.3 × 10 44 erg s −1 , and exhibited late-time ultraviolet emission that was still ongoing in our latest observations. Integrating the full light curve gives a total emitted energy of E tot = (1.36 ±0.08) × 10 52 erg, with (0.80 ± 0.02) × 10 52 erg of this emitted within 200 days of peak light. This late-time ultraviolet emission is accompanied by increasing X-ray emission that becomes softer as it brightens. ASASSN-17jz exhibited a large number of spectral emission lines most commonly seen in active galactic nuclei (AGNs) with little evidence of evolution. It also showed transient Balmer features, which became fainter and broader over time, and are still being detected >1000 days after peak brightness. We consider various physical scenarios for the origin of the transient, including supernovae (SNe), tidal disruption events, AGN outbursts, and ANTs. We find that the most likely explanation is that ASASSN-17jz was a SN IIn occurring in or near the disk of an existing AGN, and that the late-time emission is caused by the AGN transitioning to a more active state.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Oxidation in laser-generated metal plumes

The temporal evolution of atoms and molecules in a laser-produced plasma was investigated using optical emission spectroscopy for several metal targets (i.e., Al, Ti, Fe, Zr, Nb, and Ta). Plasmas from metal targets were generated by focusing 1064 nm, 6 ns pulses from an Nd:YAG laser. Gas-phase oxidation/plasma chemistry was initiated by adding O2 (partial pressures up to ≈20%) to an N2 environment where the total background pressure was kept at a constant 1 atmosphere. Temporally resolved emission spectral features were used to track the gas-phase oxidation. The dynamics of atomic and molecular species were monitored using space-resolved time-of-flight emission spectroscopy. Our results highlight that the partial pressure of O2 strongly influences spectral features and molecular formation in laser-produced plasmas. Atoms and molecules co-exist in plasmas, although with different temporal histories depending on the target material due to differences in thermo- and plasma chemical reactions occurring in the plume.

Kautz, Elizabeth J. (ORCID:0000000263389223)↗
DOE OSTI2022

A Dirac R-matrix calculation for the electron-impact excitation of W +

Abstract Aims : tungsten has been chosen for use as a plasma facing component in the divertor for the ITER experiment, and is currently being used on existing tokamaks such as JET. W + plays an integral role in assessing the impurity influx from plasma facing component of tokamaks and subsequent redeposition. Together with previously calculated a neutral tungsten electron-impact dataset this study allows us to determine neighbouring spectral lines in the same wavelength window of the spectrometer, and detect if there is strong blending of overlapping lines between these two ion stages as well as providing ionisation per photon ratios for both species. The new data is to be used for tungsten erosion/redeposition diagnostics. Methods : a significantly modified version of the GRASP0 atomic structure code in conjunction with DARC (Dirac Atomic R -matrix Code) are used to calculate the Einstein A coefficients and collisional rates used to generate a synthetic W II spectrum. The W II spectrum is compared against tungsten spectral emission experiments. Results : this study is used to model the spectrum of W ii , providing the predictive capability of identifying spectral lines from recent experiments. These results provide an integral part of impurity influx and redeposition determination, as the ionisation rates may be used to calculate S/XB ratios.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Unraveling Spatio-Temporal Chemistry Evolution in Laser Ablation Plumes and Its Relation to Initial Plasma Conditions

The chemistry evolution in a laser ablation plume depends strongly on its initial physical conditions. In this article, we investigate the impact of plasma generation conditions on the interrelated phenomena of expansion dynamics, plasma chemistry, and physical conditions. Plasmas are produced from a uranium metal target in air using nanosecond, femtosecond, and femtosecond filament-assisted laser ablation. Time-resolved two-dimensional spectral imaging was performed for evaluating the spatio-temporal evolu-tion of atoms, diatoms, polyatomic molecules, and nanoparticles in situ. Emission spectral features reveal that molecular formation occurs at early times in both femtosecond and filament ablation plumes, although with different temporal decay. In contrast, mo-lecular formation is found to occur at much later times in nanosecond plasma evolution. Spectral modeling is used to infer tem-poral behavior of plasma excitation temperature, and results highlighted that nanosecond plume temperatures decay rapidly while plumes generated by filament ablation show slowest decay. In this work, we find U atoms and UO molecules co-exist in ultrafast laser produced plasmas even at early times after plasma onset owing to favorable temperatures for molecular formation. Regardless of irradiation conditions, plume emission features showed presence of higher oxides (i.e. UxOy), although with different temporal histories. Our study provides insight into the impact of plasma generation conditions on chemistry evolution in plasmas produced from traditional focused femtosecond, nanosecond, and filament-assisted laser ablation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Multi-delay coherence imaging spectroscopy optimized for ion temperature measurements in the divertor plasma of the Wendelstein 7-X stellarator

A new coherence imaging spectroscopy (CIS) diagnostic optimized to measure the C 2+ impurity ion temperature T i spatial distribution in the divertor plasma of the W7-X stellarator is designed, tested, and validated. Using CIS to obtain T i in the edge of magnetically confined plasmas has historically been challenging because Doppler broadening and Zeeman splitting have comparable effects on the shape of spectral emission lines. To distinguish between these two mechanisms, a novel approach to birefringent crystal design is employed to minimize the diagnostic’s sensitivity to Zeeman splitting. The recently developed pixelated multi-delay CIS approach is also used to obtain four times as much spectral information as traditional CIS approaches. The T i -optimized CIS diagnostic is validated in a long-pulse W7-X plasma by comparison with a high-resolution spectrometer whose sightlines overlap with the CIS field of view. The CIS and spectrometer T i profiles have the same shape and agree to within 10% on average and 25% in the worst case. Images of the T i distribution near the divertor show toroidally elongated bands aligned with the magnetic field, with T i ranging between 10 and 40 eV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Franck-Condon electron emission from polar semiconductor photocathodes

An analytical formulation of (optical-)phonon-mediated and momentum-resonant Franck-Condon emission of photoexcited electrons from polar semiconductors is shown to be very consistent with (i) the observed emission properties of a cesiated Ga⁢As⁢(001) photocathode at 808 nm [J. Phys. D: Appl. Phys. 54, 205301 (2021)] and (ii) the measured spectral emission properties of a Ga⁢N(0001) photocathode from just below its bandgap energy to 5 eV. The theoretical analysis in the parabolic band approximation predicts the form of both the quantum efficiency and mean transverse energy of photoemission as a function of the photocathode’s electron affinity and the electron temperature in the vicinity of its emission face. The good agreement between theory and experimental data also suggests that sub-10-nm rms surface roughness effects are not significant for polar semiconductor photocathodes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗