Search NASA⌕ Search

SEARCH · Search NASA

Results for “spin decomposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Decomposition-aggregation stability analysis of the spinning Skylab

Stability of an 11-th order linear model of the spinning Skylab is determined by the decomposition-aggregation method based upon the comparison principle and vector Liapunov functions. To reduce the inherent conservativeness of the method an optimization problem is formulated and resolved producing the optimum comparison system. The system provides the best estimate of the stability region of the important structural parameter - asymmetry in the boom settings.

Cuk, S. M.↗

Noncausal effects in relativistic wave equations

The problem of determining whether a given type of external field interaction will lead to noncausal wave propagation in the context of the five-component Duffin-Kemmer-Petiau (DKP) spin-0 theory is considered. It is shown that if a Peirce decomposition of the DKP spin-0 equation is applied for each of the couplings in the equation, the causal properties become apparent from the form of the operator H in the resulting Schroedinger-type equation.

Guertin, R. F.↗

Decoding Mode-mixing in Black-hole Merger Ringdown

Optimal extraction of information from gravitational-wave observations of binary black-hole coalescences requires detailed knowledge of the waveforms. Current approaches for representing waveform information are based on spin-weighted spherical harmonic decomposition. Higher-order harmonic modes carrying a few percent of the total power output near merger can supply information critical to determining intrinsic and extrinsic parameters of the binary. One obstacle to constructing a full multi-mode template of merger waveforms is the apparently complicated behavior of some of these modes; instead of settling down to a simple quasinormal frequency with decaying amplitude, some |m| = modes show periodic bumps characteristic of mode-mixing. We analyze the strongest of these modes the anomalous (3, 2) harmonic mode measured in a set of binary black-hole merger waveform simulations, and show that to leading order, they are due to a mismatch between the spherical harmonic basis used for extraction in 3D numerical relativity simulations, and the spheroidal harmonics adapted to the perturbation theory of Kerr black holes. Other causes of mode-mixing arising from gauge ambiguities and physical properties of the quasinormal ringdown modes are also considered and found to be small for the waveforms studied here.

Kelly, Bernard J.↗

Libration in the earth's rotation

External luni-solar torque exerted on the difference (B-A) of the earth's two equatorial principal moments of inertia gives rise to two types of librational motions in the earth's rotation: the semidiurnal libration in spin and the prograde diurnal libration in polar motion. Formulas for the librations considering a realistic earth model and their tidal decompositions are derived and evaluated. The spin libration has a maximum peal-to-peak amplitude of 0.90 milliarcseconds, that of the polar libration is 0.06 milliarcseconds. Implications concerning their detectability and role in the tidal variation of earth rotation are discussed.

Chao, B. F.↗

Application of the target decomposition theorem to a polarimetric random media model

With advances in polarimetric radar measurements of land surfaces, the need for understanding the underlying scattering mechanisms and dominant target features has become the focus of many studies. In particular, the maximum use of the polarimetric information to identify and/or separate parameters related to the surface features such as vegetation thickness, structure, water content, and soil surface characteristics will enhance the possibility of using polarimetric radars for monitoring the earth's surface from space. In this paper, Cloude's decomposition theorem is applied to a polarimetric random media model to simulate the radar measurements of vegetated canopies. The vegetated canopies are modeled as a three layer discrete random medium with leaves and branches in the first layer, tree trunks in the second layer, and a half space of homogeneous ground with rough interface as the bottom layer. The distorted born approximation (DBA) has been used to compute full Mueller matrix of the canopy, using canonical dielectric objects such as thin discs and cylinders as leaves, branches, and trunks, respectively. The Mueller matrix and the derived covariance matrix contain information on the second order statistics of radar signals at various polarizations from the canopy. To decompose the covariance matrix to its constituent targets, the eigenvalues and eigenvectors of the covariance matrix are computed in terms of the physical parameters of the canopy. In addition, each eigenvector explicitly shows the scattering mechanisms such as odd and even reflections in the canopy. Cloude's decomposition theorem is applied using the Pauli spin matrices as a basis and an expression for the degree of disorder or the entropy for the vegetated surface is found. Then, the physical parameters estimated from in situ measurements are used in the random media to obtain realistic covariance matrices. As a result, the sensitivity of the eigenvalue spectrums and the coefficients resulting from the target decomposition theorem to the physical parameters of the canopy are examined and the possible use of Cloude's theorem to estimate vegetation and soil parameters is discussed.

Saatchi, Sasan S.↗

A new parameterization of polar motion

The rotational motion of the earth is decomposed into spin, polar motion and local motions. The rotation vector components are associated to phenomena such as precession, nutation, diurnal spin, polar motion and local motions. The above decomposition is accomplished without refering to an earth-fixed CIO pole or BIH zero meridian. The time-like variations of the coordinates of a surface point in a geocentric equatorial reference frame are presented as a function of the rotation vector components. In the rigid earth approximation three scalar parameters are necessary for evaluating point coordinate variations, namely spin rate of the earth, polar motion magnitude and spin rate of the polar motion vector. Two numerical examples are given as an illustration.

Papo, H. B.↗

Precipitation in a rapidly solidified and aged Ni-Al-Mo alloy

The early stages of decomposition of a highly supersaturated nickel-base alloy have been studied using TEM, SEM, and X-ray diffraction. The material was produced as a metastable solid solution by chill-block melt-spinning. On aging, the material exhibited a number of decomposition products appearing in series or concomitantly. Some of the decomposition products of this alloy, Ni4Mo, Ni3Mo, and Ni2Mo, are related to those found in Ni-Mo binary alloys. Alpha-Mo formed during solidification was distinguished from that formed by precipitation in the solid state by orientation relationships.

Nash, P.↗

Noncausal effects in relativistic wave equations

Manifestly covariant wave equations describing particles with a unique mass and spin can, for certain types of external-field interactions, possess noncausal solutions. The paper reports a procedure for applying Pierce decomposition of all six couplings expressed in the Duffin-Kemmer-Petiau spin-0 formula. This treatment converts the equation to a form in which the causal properties are apparent. The conditions under which the causal properties of higher-spin equations can be made manifest are discussed.

Guertin, R. F.↗

The dual momentum control device for large space systems - An example of distributed system adaptive control

One area in which large space systems require new technology is attitude control. The paper presents an adaptive control philosophy applicable to the control of distributed systems. An adaptive control system is described for stabilization of the flexible modes of a spinning ring. The system consists of a modal decomposition and identification subsystem, a gain adjustment subsystem, and a feedback control subsystem. Simulations are presented illustrating the adaptive capability of the system. The adaptive controller did produce stable results by quickly identifying the parameter differences and adjusting the feedback controller gains.

Montgomery, R. C.↗

A blade loss response spectrum for flexible rotor systems

A shock spectrum procedure is developed to estimate the peak displacement response of linear flexible rotor-bearing systems sugjected to a step change in unbalance (i.e., a blade loss). A progressive and a retrograde response spectrum are established. These blade loss response spectra are expressed in a unique non-dimensional form and are functions of the modal damping ratio and the ratio of rotor spin speed to modal damped whirl speed. Modal decomposition using complex modes is utilized to make use of the unique feature of the spectra for the calculation of the peak blade loss displacement response of the rotor system. The procedure is applied to three example systems using several modal superposition strategies. The results of each are compared to true peak displacement obtained by a separate transient response program.

Nelson, H. D.↗

Production of continuous mullite fiber via sol-gel processing

The development of a continuous ceramic fiber which could be used in rocket engine and rocket boosters applications was investigated at the Marshall Space Flight Center. Methods of ceramic fiber production such as melt spinning, chemical vapor deposition, and precursor polymeric fiber decomposition are discussed and compared with sol-gel processing. The production of ceramics via the sol-gel method consists of two steps, hydrolysis and polycondensation, to form the preceramic, followed by consolidation into the glass or ceramic structure. The advantages of the sol-gel method include better homogeneity and purity, lower preparation temperature, and the ability to form unique compositions. The disadvantages are the high cost of raw materials, large shrinkage during drying and firing which can lead to cracks, and long processing times. Preparation procedures for aluminosilicate sol-gel and for continuous mullite fibers are described.

Tucker, Dennis S.↗

Stabilization of large-scale systems - A spinning flexible spacecraft

Stabilization of high-order constant systems by multilevel control is proposed in the framework of the decomposition-aggregation method for stability analysis of large-scale systems. An 11-order linear model of a spinning flexible spacecraft is stabilized by the method using both the passive and the active stabilization devices. The method can take advantage of the special structural features of the model to provide the best estimate of the stability region for an important parameter which couples the wobble and the spin motion of the spacecraft.

Siljak, D. D.↗

The Application of a Boundary Integral Equation Method to the Prediction of Ducted Fan Engine Noise

The prediction of ducted fan engine noise using a boundary integral equation method (BIEM) is considered. Governing equations for the BIEM are based on linearized acoustics and describe the scattering of incident sound by a thin, finite-length cylindrical duct in the presence of a uniform axial inflow. A classical boundary value problem (BVP) is derived that includes an axisymmetric, locally reacting liner on the duct interior. Using potential theory, the BVP is recast as a system of hypersingular boundary integral equations with subsidiary conditions. We describe the integral equation derivation and solution procedure in detail. The development of the computationally efficient ducted fan noise prediction program TBIEM3D, which implements the BIEM, and its utility in conducting parametric noise reduction studies are discussed. Unlike prediction methods based on spinning mode eigenfunction expansions, the BIEM does not require the decomposition of the interior acoustic field into its radial and axial components which, for the liner case, avoids the solution of a difficult complex eigenvalue problem. Numerical spectral studies are presented to illustrate the nexus between the eigenfunction expansion representation and BIEM results. We demonstrate BIEM liner capability by examining radiation patterns for several cases of practical interest.

Dunn, M. H.↗

Prototype maneuver decomposition algorith for genesis

This paper addresses a prototype of a maneuver decomposition algorithm developed by the Genesis Navigation Team at JPL. The algorithm described herein is an early prototype designed to support navigation analyses and to provide the basis for later development of operational software by the Spacecraft Team. The basis algorithm is applicable to any spin-stabilized spacecraft with axisymmetric thrusters.

Genesis↗

Metallo-organic decomposition films

A summary of metallo-organic deposition (MOD) films for solar cells was presented. The MOD materials are metal ions compounded with organic radicals. The technology is evolving quickly for solar cell metallization. Silver compounds, especially silver neodecanoate, were developed which can be applied by thick-film screening, ink-jet printing, spin-on, spray, or dip methods. Some of the advantages of MOD are: high uniform metal content, lower firing temperatures, decomposition without leaving a carbon deposit or toxic materials, and a film that is stable under ambient conditions. Molecular design criteria were explained along with compounds formulated to date, and the accompanying reactions for these compounds. Phase stability and the other experimental and analytic results of MOD films were presented.

Gallagher, B. D.↗

Control of spinning flexible spacecraft by modal synthesis

A procedure is presented for the active control of a spinning flexible spacecraft. Such a system exhibits gyroscopic effects. The design of the controller is based on modal decomposition of the gyroscopic system. This modal decoupling procedure leads to a control mechanism implemented in modular form, which represents a distinct computational advantage over the control of the coupled system. Design procedures are demonstrated for two types of control algorithms, linear and nonlinear. The first represents classical linear feedback approach, and the second represents an application of on-off control, both types made feasible by the modal decomposition scheme.

Meirovitch, L.↗

Control of spinning flexible spacecraft by modal synthesis

A procedure is presented for the active control of a spinning flexible spacecraft. Such a system exhibits gyroscopic effects. The design of the controller is based on modal decomposition of the gyroscopic system. This modal decoupling procedure leads to a control mechanism implemented in modular form, which represents a distinct computational advantage over the control of the coupled system. Design procedures are demonstrated for two types of control algorithms, linear and nonlinear. The first represents classical linear feedback approach and the second represents an application of on-off control, both types made feasible by the modal decomposition scheme.

Meirovitch, L.↗

X-ray observations of GX 1 + 4 with the monitor proportional counter on board the Einstein Observatory

The results of X-ray observations of GX 1 + 4 with the monitor proportional counter on board the Einstein Observatory (HEAO 2) are presented. Using data from the time interval processor, the value of the approximately 2 minute pulse period at the time of the observations was determined. Previous determinations are discussed, along with evidence for a suggested value of approximately 4 minutes for the pulse period. The phase of first harmonic of the Fourier decomposition of pulse profile is stable within its errors but the phases of higher harmonics are not. The spin-up time scale is determined to be approximately 40 years.

Elsner, R. F.↗