SEARCH · Search NASA
Results for “states”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The transition from the open minimum to the ring minimum on the ground state and on the lowest excited state of like symmetry in ozone: A configuration interaction study
The metastable ring structure of the ozone 1{sup 1}A{sub 1} ground state, which theoretical calculations have shown to exist, has so far eluded experimental detection. An accurate prediction for the energy difference between this isomer and the lower open structure is therefore of interest, as is a prediction for the isomerization barrier between them, which results from interactions between the lowest two {sup 1}A{sub 1} states. In the present work, valence correlated energies of the 1{sup 1}A{sub 1} state and the 2{sup 1}A{sub 1} state were calculated at the 1{sup 1}A{sub 1} open minimum, the 1{sup 1}A{sub 1} ring minimum, the transition state between these two minima, the minimum of the 2{sup 1}A{sub 1} state, and the conical intersection between the two states. The geometries were determined at the full-valence multi-configuration self-consistent-field level. Configuration interaction (CI) expansions up to quadruple excitations were calculated with triple-zeta atomic basis sets. The CI expansions based on eight different reference configuration spaces were explored. To obtain some of the quadruple excitation energies, the method of Correlation Energy Extrapolation by Intrinsic Scaling was generalized to the simultaneous extrapolation for two states. This extrapolation method was shown to be very accurate. On the other hand, none of the CI expansions were found to have converged to millihartree (mh) accuracy at the quadruple excitation level. The data suggest that convergence to mh accuracy is probably attained at the sextuple excitation level. On the 1{sup 1}A{sub 1} state, the present calculations yield the estimates of (ring minimum—open minimum) ∼45–50 mh and (transition state—open minimum) ∼85–90 mh. For the (2{sup 1}A{sub 1}–{sup 1}A{sub 1}) excitation energy, the estimate of ∼130–170 mh is found at the open minimum and 270–310 mh at the ring minimum. At the transition state, the difference (2{sup 1}A{sub 1}–{sup 1}A{sub 1}) is found to be between 1 and 10 mh. The geometry of the transition state on the 1{sup 1}A{sub 1} surface and that of the minimum on the 2{sup 1}A{sub 1} surface nearly coincide. More accurate predictions of the energy differences also require CI expansions to at least sextuple excitations with respect to the valence space. For every wave function considered, the omission of the correlations of the 2s oxygen orbitals, which is a widely used approximation, was found to cause errors of about ±10 mh with respect to the energy differences.
A Medium-/Low-Voltage Joint State Estimator Through Linear Uncertainty Propagation
Traditionally, distribution system state estimations (DSSE) are challenged by the lack of measurements at both primary and secondary sides of the system. The widely available cable television (CATV) voltage sensors installed in low-voltage (LV) networks bring opportunities to achieve higher quality DSSE covering a broader area of the distribution network. This study proposes a medium-/low-voltage (MV/LV) joint distribution system state estimation approach using the untapped CATV measurements. It aims at addressing the need for system situational awareness at the grid edge while improving the estimation accuracy at both the primary and secondary sides compared to its disjointed counterpart. Linearized measurement functions and boundary condition uncertainty propagation rules are derived to ensure the computational efficiency and accuracy of the joint state estimator. Numerical experiments are conducted on an IEEE test feeder to demonstrate the efficacy of the proposed method and the value of CATV measurements.
Hyper Open-Shell States: The Lowest Excited Spin States of O Atom, Fe 2+ Ion, and FeF 2
Not provided.
Simple Approximation for the Ideal Reference State of Gases Adsorbed on Solid-State Surfaces
Reference states are useful as models for facilitating calculations of equilibrium constants, and they may also serve as standard states that are convenient for organizing and tabulating thermodynamic data; however, standard state conventions and appropriate reference states for adsorbed species have received less attention than those for pure substances and solutes. Here, we compare seven choices of reference states for calculations of equilibrium constants and transition state theory rate constants for flat surfaces, in particular (1) an ideal 2D harmonic oscillator, (2) an ideal rigid-molecule harmonic oscillator, (3) an ideal 2D harmonic oscillator with separable surface modes, (4) a 2D ideal gas, (5) an ideal 2D hindered translator, (6) an ideal 2D hindered translator with lowest-order barriers, and (7) a simple ideal 2D hindered translator proposed in this work. The advantage of models 5–7 is that they can treat both mobile and localized adsorbates in a consistent way, whereas models 1–3 are only appropriate for localized adsorbates, and model 4 is only appropriate for a freely translating adsorbate. Furthermore, models 6 and 7 reduce the computational cost without the user having to calculate barrier heights for diffusion. An advantage of the simple ideal 2D hindered translator is that it has a physical high-temperature limit. We also propose a reference state for nonflat surfaces. Here, the user is encouraged to choose a reference state based on the appropriateness of the model and the practicality of the calculations.
State-to-state mode selectivity in the HD + OH reaction: Perspectives from two product channels
The state-to-state quantum dynamics (J{sub tot} = 0) of the HD + OH(υ{sub 2} = 0, 1) reaction is studied using a reactant coordinate based method, which allows the analysis of both the H + DOH and D + HOH channels with a single propagation. The stretching vibration of the newly formed bond, namely, the OD bond in DOH and one OH bond in HOH, is excited, thanks to its strong coupling with the reaction coordinate at the transition state. On the other hand, the vibrational energy deposited into the OH reactant (υ{sub 2} = 1) is sequestered during the reaction in the spectator OH mode. The combined effect leads to the excitation of both the OD and OH stretching modes in the DOH product, and the dominance of the (002) normal-mode state population in the HOH product, which in the local-mode picture corresponds to the excitation of both OH bonds with one quantum each. The energy flow in this prototypical tetratomic reaction can be understood in terms of the sudden vector projection model.
Methods to Calculate Electronic Excited-State Dynamics for Molecules on Large Metal Clusters with Many States: Ensuring Fast Overlap Calculations and a Robust Choice of Phase
Here, we present an efficient set of methods for propagating excited-state dynamics involving a large number of configuration interaction singles (CIS) or Tamm-Dancoff approximation (TDA) single-reference excited states. Specifically, (i) following Head-Gordon et al., we implement an exact evaluation of the overlap of singly-excited CIS/TDA electronic states at different nuclear geometries using a biorthogonal basis and (ii) we employ a unified protocol for choosing the correct phase for each adiabat at each geometry. For many-electron systems, the combination of these techniques significantly reduces the computational cost of integrating the electronic Schrodinger equation and imposes minimal overhead on top of the underlying electronic structure calculation. As a demonstration, we calculate the electronic excited-state dynamics for a hydrogen molecule scattering off a silver metal cluster, focusing on high-lying excited states, where many electrons can be excited collectively and crossings are plentiful. Interestingly, we find that the high-lying, plasmon-like collective excitation spectrum changes with nuclear dynamics, highlighting the need to simulate non-adiabatic nuclear dynamics and plasmonic excitations simultaneously. In the future, the combination of methods presented here should help theorists build a mechanistic understanding of plasmon-assisted charge transfer and excitation energy relaxation processes near a nanoparticle or metal surface.
Consolidation of composite cathodes with NCM and sulfide solid-state electrolytes by hot pressing for all-solid-state Li metal batteries
In this study, hot pressing was evaluated as a method of cell fabrication to increase the energy density of next-generation all-solid-state batteries with NCM active material and sulfide solid-state electrolyte. Hot pressing involves consolidating glassy sulfide electrolyte by the application of pressure at a temperature above the electrolyte’s glass transition temperature. Typically, cell stacks are formed at room temperature and retain 15–30% porosity that limits cell energy density. On the other hand, the porosity of hot-pressed cell stacks is reduced to less than 10%. The electrochemical function of hot-pressed cathode composites was assessed as a function of active material and solid-state electrolyte compositions. Specifically, LiNi 0.85 Co 0.10 Mn 0.05 O 2 and LiNi 0.6 Co 0.2 Mn 0.2 O 2 were studied in combination with either glassy Li 7 P 3 S 11 , glassy Li 3 PS 4 , or β-Li 3 PS 4 solid-state electrolytes. Cathode composites composed of LiNi 0.6 Co 0.2 Mn 0.2 O 2 and Li 3 PS 4 maintained the best function after hot pressing at 200 °C and 370 MPa for 10 min. It was found that LiNi 0.6 Co 0.2 Mn 0.2 O 2 ’s resistance to microcracking and the inherent stability of Li 3 PS 4 ’s fully de-networked local structure are critical to maintain good electrochemical function after hot pressing. Furthermore, the results of this study show that hot pressing reduces porosity in the cathode composite and confirms the feasibility of cathode support of consolidated, reinforced glass separators.
Excited states via coupled cluster theory without equation-of-motion methods: Seeking higher roots with application to doubly excited states and double core hole states
Here, in this work, we revisited the idea of using the coupled-cluster (CC) ground state formalism to target excited states. Our main focus was targeting doubly excited states and double core hole states. Typical equation-of-motion (EOM) approaches for obtaining these states struggle without higher-order excitations than doubles. We showed that by using a non-Aufbau determinant optimized via the maximum overlap method, the CC ground state solver can target higher energy states. Furthermore, just with singles and doubles (i.e., CCSD), we demonstrated that the accuracy of ΔCCSD and ΔCCSD(T) (triples) far surpasses that of EOM-CCSD for doubly excited states. The accuracy of ΔCCSD(T) is nearly exact for doubly excited states considered in this work. For double core hole states, we used an improved ansatz for greater numerical stability by freezing core hole orbitals. The improved methods, core valence separation (CVS)-ΔCCSD and CVS-ΔCCSD(T), were applied to the calculation of the double ionization potential of small molecules. Even without relativistic corrections, we observed qualitatively accurate results with CVS-ΔCCSD and CVS-ΔCCSD(T). Remaining challenges in ΔCC include the description of open-shell singlet excited states with the single-reference CC ground state formalism as well as excited states with genuine multireference character. The tools and intuition developed in this work may serve as a stepping stone toward directly targeting arbitrary excited states using ground state CC methods.
Creating large Fock states and massively squeezed states in optics using systems with nonlinear bound states in the continuum
The quantization of the electromagnetic field leads directly to the existence of quantum mechanical states, called Fock states, with an exact integer number of photons. Despite these fundamental states being long-understood, and despite their many potential applications, generating them is largely an open problem. For example, at optical frequencies, it is challenging to deterministically generate Fock states of order two and beyond. Here, we predict the existence of an effect in nonlinear optics, which enables the deterministic generation of large Fock states at arbitrary frequencies. The effect, which we call an n-photon bound state in the continuum, is one in which a photonic resonance (such as a cavity mode) becomes lossless when a precise number of photons n is inside the resonance. Based on analytical theory and numerical simulations, we show that these bound states enable a remarkable phenomenon in which a coherent state of light, when injected into a system supporting this bound state, can spontaneously evolve into a Fock state of a controllable photon number. This effect is also directly applicable for creating (highly) squeezed states of light, whose photon number fluctuations are (far) below the value expected from classical physics (i.e., shot noise). In conclusion, we suggest several examples of systems to experimentally realize the effects predicted here in nonlinear nanophotonic systems, showing examples of generating both optical Fock states with large n (n > 10), as well as more macroscopic photonic states with very large squeezing, with over 90% less noise (10 dB) than the classical value associated with shot noise.
Behavior of the maximum likelihood in quantum state tomography
Quantum state tomography on a d-dimensional system demands resources that grow rapidly with d. They may be reduced by using model selection to tailor the number of parameters in the model (i.e., the size of the density matrix). Most model selection methods typically rely on a test statistic and a null theory that describes its behavior when two models are equally good. Here, we consider the loglikelihood ratio. Because of the positivity constraint ρ ≥ 0, quantum state space does not generally satisfy local asymptotic normality (LAN), meaning the classical null theory for the loglikelihood ratio (the Wilks theorem) should not be used. Thus, understanding and quantifying how positivity affects the null behavior of this test statistic is necessary for its use in model selection for state tomography. We define a new generalization of LAN, metric-projected LAN, show that quantum state space satisfies it, and derive a replacement for the Wilks theorem. In addition to enabling reliable model selection, our results shed more light on the qualitative effects of the positivity constraint on state tomography.
Is an interacting ground state (pure state) v-representable density also non-interacting ground state v-representable by a Slater determinant? In the absence of degeneracy, yes!
It is shown that in the absence of degeneracy a density,$n,(r)$, describing the probability of finding a particle in a small volume at position, r, that is known to be pure-state v-representable in terms of the ground state of an interacting system of particles evolving under an external potential,$v,(r)$, is also pure state v-representable in terms of a single Slater determinant describing the ground state of a system of non-interacting particles under a potential, $v_s(r)$ . This establishes the validity of the Kohn–Sham formalism of density functional theory. An explicit form of $v_s(r)$ is derived. We also derive the exact form of the correlation functional and the corresponding potential, $\mu_c(r)$, that lead to the exact density and energy of an interacting system's ground state. In addition, we demonstrate the existence of a one-to-one mapping between the ground-state densities of non-degenerate interacting and non-interacting systems. Finally, we show that practical implementations of the Kohn–Sham formalism can generate neither the exact density nor energy of an interacting system's ground state, a feature that is particularly true in the case of the so-called exact exchange, in which the correlation functional and potential are set equal to zero.
Terminating states in the positive-parity structures of As67
The energy levels and γ-ray decay scheme of the positive-parity states in the Tz=12 nucleus 67As have been studied by using the 40Ca(36Ar,2αp)67As reaction at a beam energy of 145 MeV. Two new band structures have been identified which can be connected to the previously known levels. The results for these bands are compared with configuration-dependent cranked Nilsson–Strutinsky calculations. The good level of agreement between theory and experiment suggests that these structures can be interpreted in terms of configurations that involve three g92 particles and that both possess noncollective terminating states.