Search NASA⌕ Search

SEARCH · Search NASA

Results for “station use”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A First Preliminary Look: Are Corridor Charging Stations Used to Extend the Range of Electric Vehicles in The EV Project?

A preliminary analysis of data from The EV Project was performed to begin answering the question: are corridor charging stations used to extend the range of electric vehicles? Data analyzed were collected from Blink brand electric vehicle supply equipment (EVSE) units based in California, Washington, and Oregon. Analysis was performed on data logged between October 1, 2012 and January 1, 2013. It should be noted that as additional AC Level 2 EVSE and DC fast chargers are deployed, and as drivers become more familiar with the use of public charging infrastructure, future analysis may have dissimilar conclusions.

33 ADVANCED PROPULSION SYSTEMS↗

Vehicle to Grid Frequency Regulation Capacity Optimal Scheduling for Battery Swapping Station Using Deep Q-Network

Battery swapping stations (BSSs) are ideal candidates for fast frequency regulation services (FFRS) due to their large battery stock capacity. In addition, BSSs can precharge batteries for customers and the batteries that are not in charging can provide a stable regulation capacity to the market. However, uncertainties, such as ACE signals and the EV per-hour visit counts, introduce stochastic nonlinear dynamics into the operation of a BSS-based FFRS. Currently, there is no quantification method to ensure its optimal economical operation. To close this gap, in this article, we propose a novel deep Q-learning-based FFRS capacity dynamic scheduling strategy. This method can autonomously schedule the hourly regulation capacity in real time to maximize the BSSx0027;s revenue for providing FFRS. Case studies using real-world data verify the efficacy of the proposed work.

25 ENERGY STORAGE↗

Hydrogen Fueling Station Using Thermal Compression: a techno-economic analysis

The goal of this project was to demonstrate the technical and economic feasibility of using thermal compression to create the hydrogen pressure necessary to operate vehicle hydrogen fueling stations. The concept of utilizing the exergy within liquid hydrogen to build pressure rather than mechanical components such as compressors or cryogenic liquid pumps has several advantages. In theory, the compressor-less hydrogen station will have lower operating and maintenance costs because the compressors found in conventional stations require large amounts of electricity to run and are prone to mechanical breakdowns. The thermal compression station also utilizes some of the energy used to liquefy the hydrogen as work to build pressure, this is energy that in conventional stations is lost as heat to the environment.

08 HYDROGEN↗

Compressor-less Hydrogen Refueling Station Using Thermal Compression

The goal of this project was to demonstrate the technical and economic feasibility of using thermal compression to create the hydrogen pressure necessary to operate vehicle hydrogen fueling stations. The concept of utilizing the exergy within liquid hydrogen to build pressure rather than mechanical components such as compressors or cryogenic liquid pumps has several advantages. In theory, the compressor-less hydrogen station will have lower operating and maintenance costs because the compressors found in conventional stations require large amounts of electricity to run and are prone to mechanical breakdowns. The thermal compression station also utilizes some of the energy used to liquefy the hydrogen as work to build pressure, this is energy that in conventional stations is lost as heat to the environment.

08 HYDROGEN↗

Seismic Signal Detection on International Monitoring System 3-Component Stations using PhaseNet

In this report we discuss training a deep learning seismic signal detection model on 3-component stations from the International Monitoring System (IMS) using the PhaseNet architecture. Using 14 years of associated signals from the International Data Centre’s (IDC) Late Event Bulletin (LEB), we auto-curated training data consisting of signal windows containing associated arrivals, and noise windows that contain no LEB-associated signals. We trained several models using different waveform window durations (30 seconds and 100 seconds), with and without bandpass filtering. We evaluated the effectiveness of our models using associated signals from the Unconstrained Global Event Bulletin (UGEB) and found that several of our models outperformed the signal detections from the IDC’s Selected Event List 3 (SEL3) arrival table. The SEL3 bulletin evaluated on the UGEB dataset with 100-second waveform windows registered a precision and recall of .15 and .48, respectively, versus .19 and .59 for our filtered-data model. For the 30-second waveform window dataset, the SEL3 bulletin achieved a precision and recall of .31 and .47, respectively, versus .32 and .60 for our filtered-data model. Finally, our models detected signals from all source-to-receiver distances, suggesting it is feasible to use a single PhaseNet model for the IMS network.

58 GEOSCIENCES↗

GAMMA SPECTRUM STABILIZATION FOR ENVIRONMENTAL RADIATION MONITORING STATIONS USING NAI(TL) DETECTOR

Abstract Gamma spectrum measured by an NaI(Tl) detector is known to be unstable with the in situ temperature. In the present work, an advanced method has been applied to stabilize the gamma spectrum measured by the NaI(Tl) detector at environmental radiation monitoring (ERM) stations. The method is based on experimental data obtained under controlled conditions in laboratory. In the temperature range from 4 to 45°C, the relative deviation of the peak positions within the stabilized gamma spectrum is less than 2%. To test this method in a real scenario, it has been integrated into the ERM station at the Military Institute of Chemical and Environmental Engineering in Hanoi, Vietnam. The results show that the proposed method is ready for a real application.

Hung, Dinh Tien↗

Initial Engineering Design of a Post-Combustion CO 2 Capture (PCC) System for Duke Energy’s East Bend Station Using Membrane-Based Technology

The Electric Power Research Institute (EPRI) led a U.S. Department of Energy (DOE) funded study for a membrane-based post-combustion CO 2 capture (PCC) system retrofit to an existing U.S. coal power plant. EPRI teamed with technology suppliers, Membrane Technology and Research (MTR), engineering consultants Nexant, Trimeric Corporation and Bechtel Power Corporation, to develop a first-of-a-kind initial design and cost estimate for a PCC system at Duke Energy’s East Bend Station (EBS) in Kentucky. This project provides a comprehensive overview of the plant design proposed and develops estimated costs to within +/- 30% accuracy for retrofitting the existing EBS coal-fired power plant with the latest MTR’s second-generation Polaris™ membrane technology for CO 2 flue gas removal. The projects primary objective was to develop a design for Duke Energy that will require “minimally invasive surgery” on their existing 600-MWe coal-fired power plant, located on the Ohio River in Boone County, Kentucky. Unlike the current commercially available solvent-based capture systems that require a reliable source of steam to operate, the MTR membrane-based capture system is driven primarily by electric power. This direct, bolt-on approach to retrofitting carbon capture could potentially reduce the impact on the existing power plant, by minimal disruption of the existing facility’s infrastructure and operating procedures. This may also reduce the amount of retrofit downtime before the power plant can resume normal operations. A second objective was to reduce the cost of each ton of captured CO 2 while maintaining the existing 600 MW net output of the East Bend Station. With this aim in mind, various options to provide the necessary auxiliary power for the capture system were evaluated for the site. The full report describes in detail the overall design, layout and components of the entire EBS membrane capture system. The equipment and sizes, the capital cost estimate encompassing both engineering design and construction for the carbon capture process and balance of plant systems is presented. A detailed techno-economic analysis is also undertaken to examine the business case for capture.

01 COAL, LIGNITE, AND PEAT↗

Remote methane sensor for emissions from pipelines and compressor stations using chirped-laser dispersion spectroscopy

Leak rates of methane (CH 4 ) from the natural gas supply chain result in lost profit from unsold product, public safety and property concerns due to potential explosion hazards, and a potentially large source of economic damages from legal liabilities. Yet large measurement challenges exist in identifying and quantifying CH 4 leak rates along the vast number and type of components in the natural gas supply chain. This is particularly true of the “midstream” components involved in the gathering, processing, compression, transmission, and storage of natural gas. This project developed and deployed new advances in chirped laser dispersion spectroscopy (CLaDS) to detect methane leaks from pipelines, compressor stations, and other midstream infrastructure from a remote position (standoff detection). The system was deployed from a van to measure fugitive methane leaks from a local compressor station as a proof-of-concept. The technique was validated through mobile laboratory measurements with in-situ sensors as well as controlled releases of methane. The system also mapped a plume from a controlled release of methane by tracking a small unmanned aerial system (sUAS) that carried a corner cube retroreflector which reflected the beam back to the instrument. The drone-based system quantified a leak rate to within 30% of the actual rate and localized the emission location within 5 m of the actual release location at standoff distances of 25-45 m. This sUAS-reflector tracking approach has benefits for mapping leak locations remotely using small drones flying around a facility. Benefits of a commercial sensor with these capabilities include reductions of leaks for pipeline operators (more profit), earlier detection of leaks to avoid catastrophic explosion hazards for public health and to mitigate property damage, and reduced methane emissions to the atmosphere (improving air quality).

03 NATURAL GAS↗

An Improved Automated Method to Detect Landfast Ice Edge off Zhongshan Station Using SAR Imagery

Landfast ice is an important component of the Antarctic sea ice. Its edge generally advances offshore to its annual maximum extent by mid-winter before retreating later in spring. This study presents an automated method to detect the seaward landfast ice edge (SLIE) at its maximum extent in the beginning in the austral spring (October) for a region northeast of the Amery Ice Shelf, East Antarctic. Here, the net gradient difference algorithm developed by Mahoney has been extended to include the medium edge detection method to automatically delineate the SLIE using the sequential SAR data. The underlying method is to use a spatial gradient operation to identify potential edge pixels, before applying the noise removal using a baseline (2000–2008) SLIE, and a pixel connection technique to generate a contiguous edge. We show that in 2016, the SLIE extended 20 km (25%) further equatorward than in 2008. Good agreement has been achieved between the SLIE derived from our automated method and the manual SLIE extraction using the original SAR as well as a near-coincident Landsat-8 OLI image. The error in the automated approach is minimized when using three to four calibrated SAR images, all with the same incident angle and the maximum separation between them is less than 20 days. Lastly, our results confirm the potential of the method for operational application, and we expect it to promote the study of Antarctic landfast ice.

47 OTHER INSTRUMENTATION↗

Image Station Use Examples from DARHT [Slides]

This presentation covers these topics: the beam envelope equation for tuning, Optical Transition Radiation (OTR), the solenoid scan method for beam identification, the Pepper-pot method for beam identification, and Beam-target studies via gated imaging.

43 PARTICLE ACCELERATORS↗

Independent confirmation of global land warming without the use of station temperatures

Confidence in estimates of anthropogenic climate change is limited by known issues with air temperature observations from land stations. Station siting, instrument changes, changing observing practices, urban effects, land cover, land use variations, and statistical processing have all been hypothesized as affecting the trends presented by the Intergovernmental Panel on Climate Change and others. Any artifacts in the observed decadal and centennial variations associated with these issues could have important consequences for scientific understanding and climate policy. We use a completely different approach to investigate global land warming over the 20th century. We have ignored all air temperature observations and instead inferred them from observations of barometric pressure, sea surface temperature, and sea-ice concentration using a physically based data assimilation system called the 20th Century Reanalysis. This independent data set reproduces both annual variations and centennial trends in the temperature data sets, demonstrating the robustness of previous conclusions regarding global warming.

54 ENVIRONMENTAL SCIENCES↗

Evaporation estimates using weather station data and boundary layer theory

Global estimates of evapotranspiration remain a challenge. In this study, we show that the daily course of air temperature and specific humidity available at routine weather stations can be used to estimate evapotranspiration and the evaporative fraction, the ratio of latent heat flux to available energy at the surface. Indeed, the diurnal increase in air temperature reflects the magnitude of the sensible heat flux and the increase of specific humidity after sunrise reflects the amplitude of evapotranspiration. Here, the method is physically constrained and based on the budget of heat and moisture in the boundary layer. Unlike land surface-based estimates, the proposed boundary layer estimate does not rely on ad hoc surface resistance parameterizations (e.g., Penman-Monteith). The proposed methodology can be applied to data collected at weather stations to estimate evapotranspiration and evaporative fraction under cloudy conditions and in the pre–remote sensing era.

54 ENVIRONMENTAL SCIENCES↗

Decentralized Failure-Tolerant Optimization of Electric Vehicle Charging

We present a decentralized failure-tolerant algorithm for optimizing electric vehicle (EV) charging, using charging stations as computing agents. The algorithm is based on the alternating direction method of multipliers (ADMM) and it has the following features: (i) It handles capacity, peak demand, and ancillary services coupling constraints. (ii) It does not require a central agent collecting information and performing coordination (e.g. an aggregator), instead all agents exchange information and computations are carried out in a fully decentralized fashion. (iii) It can withstand the failure of any number of computing agents, as long as the remaining computing agents are in a connected communications network. We construct this algorithm by reformulating the optimal EV charging problem in a decomposable form, amenable to ADMM, and then developing efficient decentralized solution methods for the subproblems dealing with coupling constraints. We conduct numerical experiments on industry-scale synthetic EV charging datasets, with up to 1,152 charging stations, using a high performance computing cluster. The experiments demonstrate that the proposed algorithm can solve the optimal EV charging problem fast enough to permit the integration of EV charging with real-time electricity markets, even in the presence of failures.

42 ENGINEERING↗

Analysis of seismicity at observed at station BCE using subspace detectors

A dynamic correlation processor (DCP) was used to process 90 days of 3-component seismic data recorded by station BCE. Two methods of detector creation were compared. The first attempted to span the signal space with a small number of subspace detectors having minimal projections on one another, and the second used a much larger number of detectors with substantial inter-template projections. After two passes over the data the results were compared, and the second approach was found to have produced more than 3 times the number of detections. For events in common, the average correlation statistic for the second approach was 0.77 compared to a statistic of 0.65 for the first approach. Also, analysis of the detection statistics as a function of SNR showed a strong functional relationship between SNR and correlation statistic for the second approach not found in the first approach. I interpret this to mean that the intra-group variability of signals produced by the second method is due primarily to noise rather than variations in source or path. These results show that (in an environment with large numbers of repeaters) if precise classification is a goal, it is better to operate a DCP with many correlators with substantial inter-template projections and that fully span the signal space. The performance of the DCP was also measured using a small set of “ground truth” picks for BCE from the Chip Brogan catalog. The catalog spanned less than three days out of the 90 days of the experiment and is also incomplete, but the comparison identified 12 signals missed by the DCP because of low SNR. Combining detections by the DCP and picks from the Brogan catalog, identifies 76 unique signals. Of these, the DCP detected 64 (84%) and the Catalog contained between 48/76 (63%) and 48/62 (77%). Analysis of time-of-day and day-of-week statistics was not useful in identifying the signal sources. However, magnitude recurrence statistics were consistent with mining induced seismicity (a preponderance of small sources). Failure of the temporal discriminants may indicate that the events being detected are not coupled in the same way to the mining activity, e.g. secondary failures. Correlation data from explosions at the Nevada test site (NTS) were used to bound the separation of events within groups. Nearly all the NTS correlations with the same passband and time bandwidth product as the detections and having a correlation statistic >= 0.8 are from sources separated by less than 1 km. Even at correlation values of 0.6 nearly all the source separations are less than about 3 km. Because the DCP detectors were formed to span the signal space at a correlation value of 0.9 and because the intra-group variability is most likely due to noise and not source variability, it is likely that the sources associated with each detector are separated by one km or less, and almost certain that the majority are separated by no more than 3 km.

47 OTHER INSTRUMENTATION↗

The laser shock station in the dynamic compression sector. I

The Laser Shock Station in the Dynamic Compression Sector [Advanced Photon Source (APS), Argonne National Laboratory] links a laser-driven shock compression platform with high energy x-ray pulses from the APS to achieve in-situ, time-resolved x-ray measurements (diffraction and imaging) in materials subjected to well-characterized, high stress, short duration planar shock waves. Additionally, the combination of this station and the other DCS experimental stations provides a unique and versatile experimental facility to study condensed state phenomena by undertaking real-time, multi-scale measurements in materials subjected to a wide range of shock amplitudes (to above ~350 GPa) and time-durations (~10 ns to 1 μs). The Laser Shock Station uses a 100 joule, 5-17 ns, 351 nm frequency tripled Nd:glass laser with programmable pulse shaping and focal profile smoothing for maximum precision. The laser is capable of a shot every 30 minutes. The interaction chamber contains multiple ports for simultaneous diagnostics, a sample holder that allows sequential exposure for 14 samples without breaking vacuum, the capability to vary the angle between the x-ray beam and laser beam by 135°, and the ability to translate to select one of two types of x-ray beams. X-ray data can be taken with a temporal resolution of ~90 psec. Highly reproducible, planar shocks can be propagated in samples to undertake precise and well-characterized experiments. In a series of ten shots, the absolute variation in the time the shock breaks out at the back of the sample is less than 500ps and the variation in peak particle velocity at the sample/window interface is 4.3%. Lastly, this paper describes the entire DCS Laser Shock Station, including sample fabrication and diagnostics, as well as representative experimental results from shock compressed tantalum to demonstrate the excellent quality of x-ray diffraction data in solid tantalum and to establish the stress for tantalum melting.

47 OTHER INSTRUMENTATION↗