Search NASA⌕ Search

SEARCH · Search NASA

Results for “statistical comparison”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

A statistical comparison of two carbon fiber/epoxy fabrication techniques

A statistical comparison of the compression strengths of specimens that were fabricated by either a platen press or an autoclave were performed on IM6/3501-6 carbon/epoxy composites of 16-ply (0,+45,90,-45)(sub S2) lay-up configuration. The samples were cured with the same parameters and processing materials. It was found that the autoclaved panels were thicker than the platen press cured samples. Two hundred samples of each type of cure process were compression tested. The autoclaved samples had an average strength of 450 MPa (65.5 ksi), while the press cured samples had an average strength of 370 MPa (54.0 ksi). A Weibull analysis of the data showed that there is only a 30 pct. probability that the two types of cure systems yield specimens that can be considered from the same family.

Hodge, A. J.↗
NASA NTRS2009

MISR Aerosol Product Attributes and Statistical Comparisons with MODIS

In this paper, Multi-angle Imaging SpectroRadiometer (MISR) aerosol product attributes are described, including geometry and algorithm performance flags. Actual retrieval coverage is mapped and explained in detail using representative global monthly data. Statistical comparisons are made with coincident aerosol optical depth (AOD) and Angstrom exponent (ANG) retrieval results from the Moderate Resolution Imaging Spectroradiometer (MODIS) instrument. The relationship between these results and the ones previously obtained for MISR and MODIS individually, based on comparisons with coincident ground-truth observations, is established. For the data examined, MISR and MODIS each obtain successful aerosol retrievals about 15% of the time, and coincident MISR-MODIS aerosol retrievals are obtained for about 6%-7% of the total overlap region. Cloud avoidance, glint and oblique-Sun exclusions, and other algorithm physical limitations account for these results. For both MISR and MODIS, successful retrievals are obtained for over 75% of locations where attempts are made. Where coincident AOD retrievals are obtained over ocean, the MISR-MODIS correlation coefficient is about 0.9; over land, the correlation coefficient is about 0.7. Differences are traced to specific known algorithm issues or conditions. Over-ocean ANG comparisons yield a correlation of 0.67, showing consistency in distinguishing aerosol air masses dominated by coarse-mode versus fine-mode particles. Sampling considerations imply that care must be taken when assessing monthly global aerosol direct radiative forcing and AOD trends with these products, but they can be used directly for many other applications, such as regional AOD gradient and aerosol air mass type mapping and aerosol transport model validation. Users are urged to take seriously the published product data-quality statements.

Kahn, Ralph A.↗
NASA NTRS1985

Statistical comparison of pooled nitrogen washout data of various altitude decompression response groups

This analysis was done to determine whether various decompression response groups could be characterized by the pooled nitrogen (N2) washout profiles of the group members, pooling individual washout profiles provided a smooth time dependent function of means representative of the decompression response group. No statistically significant differences were detected. The statistical comparisons of the profiles were performed by means of univariate weighted t-test at each 5 minute profile point, and with levels of significance of 5 and 10 percent. The estimated powers of the tests (i.e., probabilities) to detect the observed differences in the pooled profiles were of the order of 8 to 30 percent.

Edwards, B. F.↗
NASA NTRS2002

A Statistical Comparison of PSC Model Simulations and POAM Observations

A better knowledge of PSC composition and formation mechanisms is important to better understand and predict stratospheric ozone depletion. Several past studies have attempted to compare modeling results with satellite observations. These comparisons have concentrated on case studies. In this paper we adopt a statistical approach. POAM PSC observations from several Arctic winters are categorized into Type Ia and Ib PSCs using a technique based on Strawa et al. The discrimination technique has been modified to employ the wavelengths dependence of the extinction signal at all wavelengths rather than only at 603 and 10 18 nm. Winter-long simulations for the 1999-2000 Arctic winter have been made using the IMPACT model. These simulations have been constrained by aircraft observations made during the SOLVE/THESEO 2000 campaign. A complete set of winter-long simulations was run for several different microphysical and PSC formation scenarios. The simulations give us perfect knowledge of PSC type (Ia, Ib, or II), composition, especially condensed phase HNO3 which is important for denitrification, and condensed phase H2O. Comparisons are made between the simulation and observation of PSC extinction at 1018 rim versus wavelength dependence, winter-long percentages of Ia and Ib occurrence, and temporal and altitude trends of the PSCs. These comparisons allow us to comment on how realistic some modeling scenarios are.

Strawa, A. W.↗
NASA NTRS1979

Statistical comparisons of aircraft flyover noise adjustment procedures for different weather conditions

Aircraft flyover noise spectra and effective perceived noise level (EPNL) values obtained under widely different weather conditions were adjusted according to a proposed national standard. The results were statistically compared with the same measured spectra adjusted according to an alternate procedure and with reference spectra and EPNL values obtained under almost ideal weather conditions. Three different ways to represent the weather condition through which the sound propagated were also evaluated.

Mueller, A. W.↗
NASA NTRS1985

Statistical comparison of galaxy formation models - The bispectrum

To discriminate between galaxy-formation models that give similar two-point correlation functions, higher moments, specifically the three-point function in transform space or bispectrum, are looked to for an ensemble of numerical simulations. Different behaviors of this statistic are found that can be used to distinguish between classes of models. Up to the uncertainty in identifying the galaxy distribution with the mass distribution in the models, the results seem to prefer the isothermal or the cold-particle models. No model, however, agrees in all detail with the observational bispectrum of the Shane-Wirtanen galaxy catalog.

Fry, J. N.↗
NASA NTRS1979

Biaxial and uniaxial data for statistical comparisons of a ceramic's strength

The uniaxial and equibiaxial tensile strengths of a brittle material were measured in bending. Equibiaxial tension was attained by concentric ring loading of disks and uniaxial tension by four-point line loading of plates. The two specimen designs give equal volumes, surface areas, and stress gradients. Ground surfaces and lapped surfaces were tested. The equibiaxial tensile strength of a dense alumina was lower than the uniaxial tensile strengths for both ground and lapped surfaces, 8.5 and 8.1%, respectively. The Batdorf theory of flaw statistics, in which biaxial tensile strengths can be predicted from the statistical distribution of uniaxial tensile strength measurements, agreed with the data.

Giovan, M. N.↗
NASA NTRS2012

Columnar Aerosol Properties from Sun-and-star Photometry: Statistical Comparisons and Day-to-night Dynamic

This work presents the first analysis of longterm correlative day-to-night columnar aerosol optical properties. The aim is to better understand columnar aerosol dynamic from ground-based observations, which are poorly studied until now. To this end we have used a combination of sun-and-star photometry measurements acquired in the city of Granada (37.16 N, 3.60 W, 680 ma.s.l.; South-East of Spain) from 2007 to 2010. For the whole study period, mean aerosol optical depth (AOD) around 440 nm (+/-standard deviation) is 0.18 +/- 0.10 and 0.19 +/- 0.11 for daytime and nighttime, respectively, while the mean Angstr¨om exponent (alpha ) is 1.0 +/- 0.4 and 0.9 +/- 0.4 for daytime and nighttime. The ANOVA statistical tests reveal that there are no significant differences between AOD and obtained at daytime and those at nighttime. Additionally, the mean daytime values of AOD and obtained during this study period are coherent with the values obtained in the surrounding AERONET stations. On the other hand, AOD around 440 nm present evident seasonal patterns characterised by large values in summer (mean value of 0.20 +/- 0.10 both at daytime and nighttime) and low values in winter (mean value of 0.15 +/- 0.09 at daytime and 0.17 +/- 0.10 at nighttime). The Angstr¨om exponents also present seasonal patterns, but with low values in summer (mean values of 0.8 +/- 0.4 and 0.9 +/- 0.4 at dayand night-time) and relatively large values in winter (mean values of 1.2 +/- 0.4 and 1.0 +/- 0.3 at daytime and nighttime). These seasonal patterns are explained by the differences in the meteorological conditions and by the differences in the strength of the aerosol sources. To take more insight about the changes in aerosol particles between day and night, the spectral differences of the Angstrom exponent as function of the Angstr¨om exponent are also studied. These analyses reveal increases of the fine mode radius and of the fine mode contribution to AOD during nighttime, being more remarkable in the summer seasons. These variations are explained by the changes of the local aerosol sources and by the meteorological conditions between daytime and nighttime, as well as aerosol aging processes. Case studies during summer and winter for different aerosol loads and types are also presented to clearly illustrate these findings.

columnar aerosol optical properties↗
NASA NTRS2004

Statistical Comparison and Improvement of Methods for Combining Random and Harmonic Loads

Structures in many environments experience both random and harmonic excitation. A variety of closed-form techniques has been used in the aerospace industry to combine the loads resulting from the two sources. The resulting combined loads are then used to design for both yield ultimate strength and high cycle fatigue capability. This paper examines the cumulative distribution function (CDF) percentiles obtained using each method by integrating the joint probability density function of the sine and random components. A new Microsoft Excel spreadsheet macro that links with the software program Mathematics is then used to calculate the combined value corresponding to any desired percentile along with a curve fit to this value. Another Excel macro is used to calculate the combination using a Monte Carlo simulation. Unlike the traditional techniques, these methods quantify the calculated load value with a Consistent percentile. Using either of the presented methods can be extremely valuable in probabilistic design, which requires a statistical characterization of the loading. Also, since the CDF at high probability levels is very flat, the design value is extremely sensitive to the predetermined percentile; therefore, applying the new techniques can lower the design loading substantially without losing any of the identified structural reliability.

Brown, Andrew M.↗
NASA NTRS2001

NRLMSISE-00 Empirical Model of the Atmosphere: Statistical Comparisons and Scientific Issues

The new NRLMSISE-00 model and the associated NRLMSIS database now include the following data: (1) total mass density from satellite accelerometers and from orbit determination, including the Jacchia and Barlier data; (2) temperature from incoherent scatter radar, and; (3) molecular oxygen number density, [O2], from solar ultraviolet occultation aboard the Solar Maximum Mission (SMM). A new component, 'anomalous oxygen,' allows for appreciable O(+) and hot atomic oxygen contributions to the total mass density at high altitudes and applies primarily to drag estimation above 500 km. Extensive tables compare our entire database to the NRLMSISE-00, MSISE-90, and Jacchia-70 models for different altitude bands and levels of geomagnetic activity. We also investigate scientific issues related to the new data sets in the NRLMSIS database. Especially noteworthy is the solar activity dependence of the Jacchia data, with which we investigate a large O(+) contribution to the total mass density under the combination of summer, low solar activity, high latitudes, and high altitudes. Under these conditions, except at very low solar activity, the Jacchia data and the Jacchia-70 model indeed show a significantly higher total mass density than does MSISE-90. However, under the corresponding winter conditions, the MSIS-class models represent a noticeable improvement relative to Jacchia-70 over a wide range of F(sub 10.7). Considering the two regimes together, NRLMSISE-00 achieves an improvement over both MSISE-90 and Jacchia-70 by incorporating advantages of each.

Aikin, A. C.↗
NASA NTRS2020

Antarctic Meteorites: A Statistical Look at a Uniquely Valuable Resource

As of the end of the 2018-19 field season, the U.S. Antarctic meteorite program has surpassed 23,000 meteorites collected. The U.S. collection is valuable in that it is classified in its entirety. The systematic methods employed to collect the meteorites have provided meteorites of more than 40 types, many of which are the first of their type ever recognized. One of the early drivers for consistent and methodical characterization of the entire U.S. Antarctic collection was to allow statistical comparisons. Early statistical assessments of the U.S. Antarctic collection examined mass distributions and the relative frequency of meteorite types as well as comparisons to a defined set of modern falls. Using these statistics argued that the flux of H chondrites changed over time used model size distributions to deconstruct the contribution of wind movement, meteorite supply and search losses to the Antarctic collection. Mass-based statistics and size distribution comparisons were examined by investigated various aspects of the statistics, including comparison with modern falls/Saharan finds. Also discuss geospatial statistics provides a comprehensive overview of the statistics of the Antarctic collections for the first 35 seasons of U.S. collection by ANSMET. Here we build upon that assessment and that from.

Corrigan, C. M.↗
NASA NTRSDate not supplied

Antarctic Meteorites: A Statistical Look at a Uniquely Valuable Resource

As of the 2019-20 field season, the U.S. Antarctic meteorite program has collected >23,000 meteorites. The U.S. collection is valuable in that it is classified in its entirety. The systematic collection methods employed have pro-vided meteorites of >40 types, many of which are the first of their type ever recognized. One of the early drivers for characterization of the entire U.S. Antarctic collection was to allow statistical comparisons. Early statistical assessments examined mass distributions and the relative frequency of meteorite types as well as comparisons to a defined set of modern falls. Using these statistics some have argued that the flux of H chondrites changed over time. Harvey used model size distributions to deconstruct the contribution of wind movement, meteorite supply and search losses to the Antarctic collection. Mass-based statistics and size distribution comparisons were examined, including comparison with modern falls/Saharan finds. Focus has been on geospatial statistics, with a comprehensive overview of the statistics of the Antarctic collections provided from the first 35 seasons of U.S. collection by ANSMET, as well as more recent assessments.

Antarctic meteorite↗
NASA NTRS1984

A diagnostic approach to obtaining planetary boundary layer winds using satellite-derived thermal data

The feasibility of using satellite derived thermal data to generate realistic synoptic scale winds within the planetary boundary layer (PBL) is examined. Diagnostic modified Ekman wind equations from the Air Force Global Weather Central (AFGWC) Boundary Layer Model are used to compute winds at seven levels within the PBL transition layer (50 m to 1600 m AGL). Satellite derived winds based on 62 predawn TIROS-N soundings are compared to similarly derived wind fields based on 39 AVE-SESAME II rawinsonde (RAOB) soundings taken 2 h later. Actual wind fields are also used as a basis for comparison. Qualitative and statistical comparisons show that the Ekman winds from both sources are in very close agreement, with an average vector correlation coefficient of 0.815. Best results are obtained at 300 m AGL. Satellite winds tend to be slightly weaker than their RAOB counterparts and exhibit a greater degree of cross-isobaric flow. The modified Ekman winds show a significant improvement over geostrophic values at levels nearest the surface.

Belt, Carol L.↗
NASA NTRS2012

Comparison of Statistical Estimation Techniques for Mars Entry, Descent, and Landing Reconstruction from MEDLI-like Data Sources

Flight data from an entry, descent, and landing (EDL) sequence can be used to reconstruct the vehicle's trajectory, aerodynamic coefficients and the atmospheric profile experienced by the vehicle. Past Mars missions have contained instruments that do not provide direct measurement of the freestream atmospheric conditions. Thus, the uncertainties in the atmospheric reconstruction and the aerodynamic database knowledge could not be separated. The upcoming Mars Science Laboratory (MSL) will take measurements of the pressure distribution on the aeroshell forebody during entry and will allow freestream atmospheric conditions to be partially observable. This data provides a mean to separate atmospheric and aerodynamic uncertainties and is part of the MSL EDL Instrumentation (MEDLI) project. Methods to estimate the flight performance statistically using on-board measurements are demonstrated here through the use of simulated Mars data. Different statistical estimators are used to demonstrate which estimator best quantifies the uncertainties in the flight parameters. The techniques demonstrated herein are planned for application to the MSL flight dataset after the spacecraft lands on Mars in August 2012.

Dutta, Soumyo↗