SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Steepest descent method extended to trajectory optimization problem for stochastically disturbed systems with application to Euler equation for white noise problem of reentering vehicle
The ultimate goal of this research program is to make Probabilistic Structural Analysis (PSA) computationally efficient and hence practical for the design environment by achieving large scale parallelism. The paper identifies the multiple levels of parallelism in PSA, identifies methodologies for exploiting this parallelism, describes the development of a parallel stochastic finite element code, and presents results of two example applications. It is demonstrated that speeds within five percent of those theoretically possible can be achieved. A special-purpose numerical technique, the stochastic preconditioned conjugate gradient method, is also presented and demonstrated to be extremely efficient for certain classes of PSA problems.
Estimation of unknown noise covariances in a Kalman filter is a problem of significant practical interest in a wide array of applications. Although this problem has a long history, reliable algorithms for their estimation were scant, and necessary and sufficient conditions for identifiability of the covariances were in dispute until recently. Necessary and sufficient conditions for covariance estimation and a batch estimation algorithm were presented in our previous study. This paper presents stochastic gradient descent algorithms for noise covariance estimation in adaptive Kalman filters that are an order of magnitude faster than the batch method for similar or better root mean square error. More significantly, these algorithms are applicable to non-stationary systems where the noise covariances can occasionally jump up or down by an unknown magnitude. The computational efficiency of the new algorithms stems from adaptive thresholds for convergence, recursive fading memory estimation of the sample cross-correlations of the innovations, and accelerated stochastic gradient descent algorithms. The comparative evaluation of the proposed methods on a number of test cases demonstrates their computational efficiency and accuracy.
The goals of this work are to use a nested optimizer to conduct simultaneous sizing (inner level) and topology (outer level) design of a wingbox, considering uncertainties in the safety factors used to define the aeroelastic constraints. These uncertainties, propagated via sampling-driven polynomial chaos, are explicitly introduced at the inner level of the method, during gradient-based sizing optimization, resulting in a stochastic optimal sizing distribution. Measures of robustness in the total structural mass are then passed to the outer level, where a global optimizer evolves the topology parameters. The results demonstrate design choices needed to improve robustness in the face of uncertain safety factors, and the various physical mechanisms driving this process.
A method for active fluid flow control based on control theory is discussed. Dynamic programming and fixed point successive approximations are used to accommodate the nonlinear control problem. The long-term goal of this project is to establish an effective method applicable to complex flows such as turbulence and jets. However, in this report, the method is applied to stochastic Burgers equation as an intermediate step towards this goal. Numerical results are compared with those obtained by gradient search methods.
We present robust trajectory optimization techniques using a sweeping gradient method for ordinary differential equations with events (SGM) and linear covariance analysis (LinCov). SGM is a method for computing the gradient of trajectory analyses defined by performance indices over initial value problems with events with respect to static parameters. LinCov is an analytic technique for predicting stochastic behavior of dynamical systems. By combining SGM and LinCov, it is possible use efficient, off-the-shelf, gradient-based optimizers to solve robust optimal trajectory design problems. We describe the individual methods and some details on how they can be combined. Then we apply the combined techniques to a variety of orbital trajectory design problems to demonstrate its use, including minimum fuel transfer and mid-course correction burn scheduling.
Differential dynamic programming (DDP) has been demonstrated as a viable approach to low-thrust trajectory optimization, namely with the recent success of NASAs Dawn mission. The Dawn trajectory was designed with the DDP-based Static Dynamic Optimal Control algorithm used in the Mystic software. Another recently developed method, Hybrid Differential Dynamic Programming (HDDP) is a variant of the standard DDP formulation that leverages both first-order and second-order state transition matrices in addition to nonlinear programming (NLP) techniques. Areas of improvement over standard DDP include constraint handling, convergence properties, continuous dynamics, and multi-phase capability. DDP is a gradient based method and will converge to a solution nearby an initial guess. In this study, monotonic basin hopping (MBH) is employed as a stochastic search method to overcome this limitation, by augmenting the HDDP algorithm for a wider search of the solution space.
Differential dynamic programming (DDP) has been demonstrated as a viable approach to low-thrust trajectory optimization, namely with the recent success of NASA's Dawn mission. The Dawn trajectory was designed with the DDP-based Static/Dynamic Optimal Control algorithm used in the Mystic software.1 Another recently developed method, Hybrid Differential Dynamic Programming (HDDP),2, 3 is a variant of the standard DDP formulation that leverages both first-order and second-order state transition matrices in addition to nonlinear programming (NLP) techniques. Areas of improvement over standard DDP include constraint handling, convergence properties, continuous dynamics, and multi-phase capability. DDP is a gradient based method and will converge to a solution nearby an initial guess. In this study, monotonic basin hopping (MBH) is employed as a stochastic search method to overcome this limitation, by augmenting the HDDP algorithm for a wider search of the solution space.
The linearized frequency-domain method was recently implemented in the stabilized finite element solver in NASA’s FUN3D code. Previous work by the authors used this method for enforcing flutter constraints during gradient-based optimizations. More recently, the solver was expanded to account for continuous (also known as stochastic) gust responses. This paper expands on recent Common Research Model wing optimization work, which demonstrated gradient-based optimization with flutter and stochastic gust constraints, among others. While that work utilized FUN3D for static aeroelastic solutions but relied on doublet lattice aerodynamics for gust and flutter responses, the present work replaces these unsteady aerodynamic analyses with those of FUN3D’s linearized frequency-domain solver. With analytic derivatives available, gradient-based optimization is performed through the use of the OpenMDAO/MPhys libraries with over 700 shape, structural, and aerodynamic design variables and over 10 nonlinear constraints. Comparisons of analysis results and optimized designs are made between doublet lattice and linearized frequency-domain solutions.
Metastable state relaxation in a gravitational field is investigated in the case of non-critical binary solutions. A relaxation description is presented in terms of the time-dependent Ginzburg-Landau formalism for a non-conserved order parameter. A new ansatz for solution of the corresponding partial nonlinear stochastic differential equation is discussed. It is proved that, for the supersaturated solution under consideration, the metastable state relaxation in a gravitational field leads to formation of solute concentration gradients due to the sedimentation of subcritical solute clusters. The pure discussion of the possible methods to compare theoretical results and experimental data related to solute sedimentation in a gravitational field is presented. It is shown that in order to describe these experiments it is necessary to deal both with the value of the solute concentration gradient and with its formation rate. The stochastic nature of the sedimentation process is shown.
A robust optimization is demonstrated on a two-dimensional inviscid airfoil problem in subsonic flow. Given uncertainties in statistically independent, random, normally distributed flow parameters (input variables), an approximate first-order statistical moment method is employed to represent the Computational Fluid Dynamics (CFD) code outputs as expected values with variances. These output quantities are used to form the objective function and constraints. The constraints are cast in probabilistic terms; that is, the probability that a constraint is satisfied is greater than or equal to some desired target probability. Gradient-based robust optimization of this stochastic problem is accomplished through use of both first and second-order sensitivity derivatives. For each robust optimization, the effect of increasing both input standard deviations and target probability of constraint satisfaction are demonstrated. This method provides a means for incorporating uncertainty when considering small deviations from input mean values.
We describe the application of a sweeping gradient method for ordinary differential equations with events (SGM) and linear covariance analysis (LinCov) to the co-optimization of navigation system requirement generation and robust trajectory design. SGM is a method for computing the gradient of trajectory analyses defined by performance indices over initial value problems with events with respect to static parameters. LinCov is an analytic technique for predicting stochastic behavior of dynamical systems. By combining SGM and LinCov, it is possible use efficient, off-the-shelf, gradient-based optimizers to solve a combined robust optimal trajectory and navigation system design problem. In this paper, we formulate the required models to apply the combined SGM and LinCov techniques to a Near-Rectilinear Halo Orbit rendezvous approach scenario and show results for several intermediate problems.
This paper developes a method for mathematically modeling terrain surfaces for use on an unmanned Martian vehicle. The data collected by the vehicle consists of terrain height and two directional slopes at each data point. The parameters for the mathematical terrain model are stochastically determined by using least square approximations.-
The paper examines the mathematical and physical foundations for the kinetic theory of reactive turbulent flows, discussing the differences and relation between the kinetic and averaged equations, and comparing some solutions of the kinetic equations obtained by the Green's function method with those obtained by the approximate bimodal method. The kinetic method described consists essentially in constructing the probability density functions of the chemical species on the basis of solutions of the Langevin stochastic equation for the influence of eddies on the behavior of fluid elements. When the kinetic equations are solved for the structure of the diffusion flame established in a shear layer by the bimodal method, discontinuities in gradients of the mean concentrations at the two flame edges appear. This is a consequence of the bimodal approximation of all distribution functions by two dissimilar half-Maxwellian functions, which is a very crude approximation. These discontinuities do not appear when the solutions are constructed by the Green's function method described here.
The perceived quality of images reconstructed from low bit rate compression is severely degraded by the appearance of transform coding artifacts. This paper proposes a method for producing higher quality reconstructed images based on a stochastic model for the image data. Quantization (scalar or vector) partitions the transform coefficient space and maps all points in a partition cell to a representative reconstruction point, usually taken as the centroid of the cell. The proposed image estimation technique selects the reconstruction point within the quantization partition cell which results in a reconstructed image which best fits a non-Gaussian Markov random field (MRF) image model. This approach results in a convex constrained optimization problem which can be solved iteratively. At each iteration, the gradient projection method is used to update the estimate based on the image model. In the transform domain, the resulting coefficient reconstruction points are projected to the particular quantization partition cells defined by the compressed image. Experimental results will be shown for images compressed using scalar quantization of block DCT and using vector quantization of subband wavelet transform. The proposed image decompression provides a reconstructed image with reduced visibility of transform coding artifacts and superior perceived quality.
A method is developed for modeling terrain surfaces for use on an unmanned Martian roving vehicle. The modeling procedure employs a two-step process which uses gradient as well as height data in order to improve the accuracy of the model's gradient. Least square approximation is used in order to stochastically determine the parameters which describe the modeled surface. A complete error analysis of the modeling procedure is included which determines the effect of instrumental measurement errors on the model's accuracy. Computer simulation is used as a means of testing the entire modeling process which includes the acquisition of data points, the two-step modeling process and the error analysis. Finally, to illustrate the procedure, a numerical example is included.
The research effort in the Center for the Advancement of Computational Mechanics at Georgia Tech has two main thrusts. The first of these is the development of special approaches for the numerical stress analysis of solids and structures whose material and geometric properties are uncertain. The second seeks to develop and implement high-efficiency plate and shell elements. The stochastic element method, currently being implemented, will be able to more accurately portray the probabilistic nature of stress, strain, and displacement in actual structures. Current research has provided a hybrid-stress shell element whose behavior is acceptable for aspect ratios as high as 30 to 1. Thus, substantially more complex analyses will be practicable as soon as this element is fully implemented. An additional advantage of the hybrid approach is that it permits more accurate stress-recovery at the upper and lower surfaces of the shell, an important consideration in high thickness-gradient applications. The software associated with the above research is being implemented in the form of extensions to the Nessus code. The hybrid shell element has been successfully tested in several small-deformation elastic analyses. The theoretical formulation of the stochastic elements is essentially complete; its implementation is just beginning.
The random element method is a generalization of the random vortex method that was developed for the numerical modeling of momentum transport processes as expressed in terms of the Navier-Stokes equations. The method is based on the concept that random walk, as exemplified by Brownian motion, is the stochastic manifestation of diffusional processes. The algorithm based on this method is grid-free and does not require the diffusion equation to be discritized over a mesh, it is thus devoid of numerical diffusion associated with finite difference methods. Moreover, the algorithm is self-adaptive in space and explicit in time, resulting in an improved numerical resolution of gradients as well as a simple and efficient computational procedure. The method is applied here to an assortment of problems of diffusion of momentum and energy in one-dimension as well as heat conduction in two-dimensions in order to assess its validity and accuracy. The numerical solutions obtained are found to be in good agreement with exact solution except for a statistical error introduced by using a finite number of elements, the error can be reduced by increasing the number of elements or by using ensemble averaging over a number of solutions.