Search NASA⌕ Search

SEARCH · Search NASA

Results for “stratification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Development of thermal stratification and destratification scaling concepts. Volume 2: Stratification

Temperature and pressure data obtained from the saturated Freon 113 PCA closed-tank stratification tests are presented. The data presented in tabular form are the test conditions, sensible heat values, and Freon 113 PCA liquid and ullage (vapor) properties. Also included, are graphical representations of the liquid bulk temperature and pressure histories, and dimensionless liquid-ullage delta-temperature profiles. Modified Grashof numbers and Fourier number-history data are also presented graphically.

Lovrich, T. N.↗
NASA NTRS1975

Development of thermal stratification and destratification scaling concepts. Volume 1: Definition of thermal stratification scaling parameters and experimental investigations

The dimensionless parameters associated with the thermal stratification and pressure history of a heated container of liquid and its vapor were examined. The Modified Grashof number, the Fourier number, and an Interface number were parameterized using a single test liquid, Freon 113. Cylindrical test tanks with spherical dome end caps were built. Blanket heaters covered the tanks and thermocouples monitored the temperatures of the liquid, the ullage, the tank walls, and the foam insulation encapsulating the tank. A centrifuge was used for the 6 inch tank to preserve the same scaling parameter values between it and the larger tanks. Tests were conducted over a range of Gr* values and the degree of scaling was checked by comparing the dimensionless pressures and temperatures for each scaled pair of tests. Results indicate that the bulk liquid temperature, the surface temperature of the liquid, and the tank pressure can be scaled with the three dimensionless parameters. Some deviation was, however, found in the detailed temperature profiles between the scaled pairs of tests.

Lovrich, T. N.↗
NASA NTRS2000

Numerical Study of Wake Vortex Behavior in Turbulent Domains with Ambient Stratification

A three-dimensional large eddy simulation model is used to investigate the sensitivity of ambient stratification with turbulence on the behavior of aircraft wake vortices. Modeled ambient turbulence levels range from very weak to moderate, and stratification levels range from strongly stable to unstable. The results of profound significance from this study are: 1) very little sensitivity between vortex linking time and the level of stratification, 2) the mean vortex separation remained nearly constant regardless of stratification and turbulence (at least prior to linking), 3) the wake vortices did not rise regardless of the level of stratification, and 4) for very strong stratification, the vortex stopped descending and quickly dissipated even before vortex linking could occur. These results are supported by experimental data and are contrary to conclusions from other numerical studies that assume laminar flow and/or relatively-low Reynolds numbers.

Switzer, George F.↗
NASA NTRS2013

Temperature Stratification in a Cryogenic Fuel Tank

A reduced dynamical model describing temperature stratification effects driven by natural convection in a liquid hydrogen cryogenic fuel tank has been developed. It accounts for cryogenic propellant loading, storage, and unloading in the conditions of normal, increased, and micro- gravity. The model involves multiple horizontal control volumes in both liquid and ullage spaces. Temperature and velocity boundary layers at the tank walls are taken into account by using correlation relations. Heat exchange involving the tank wall is considered by means of the lumped-parameter method. By employing basic conservation laws, the model takes into consideration the major multi-phase mass and energy exchange processes involved, such as condensation-evaporation of the hydrogen, as well as flows of hydrogen liquid and vapor in the presence of pressurizing helium gas. The model involves a liquid hydrogen feed line and a tank ullage vent valve for pressure control. The temperature stratification effects are investigated, including in the presence of vent valve oscillations. A simulation of temperature stratification effects in a generic cryogenic tank has been implemented in Matlab and results are presented for various tank conditions.

stratification↗
NASA NTRS1989

The influence of atmospheric stratification on scatterometer data

The effects of atmospheric stratification and the stability of the atmospheric stratification on the scatterometer data measuring surface winds over the ocean were investigated using the boundary layer model developed by Louis (1979). A variational analysis method is proposed, which allows direct assimilation of scatterometer data. It is shown that the effect of the stability of atmospheric stratification on the wind increment is relatively small. However, it is a systematic effect, and neglecting it would consistently underestimate the winds in stable regions.

Louis, Jean-Francois↗
NASA NTRS1990

Thermal advection and stratification effects on surface winds and the low level meridional mass transport

Statistical tests are performed on the Seasat scatterometer observations to examine if and to what degree thermal advection and stratification effects manifest themselves in these remotely sensed measurements of mean wind and wind stress over the ocean. On the basis of a two layer baroclinic boundary layer model which is presented, it is shown that the thermal advection and stratification of the entire boundary layer as well as the geostrophic forcing influence the modeled near surface wind and wind stress profiles. Evidence of diurnal variation in the stratification under barotropic conditions is found in the data, with the daytime marine boundary layer being more convective than its nighttime counterpart. The temporal and spacial sampling pattern of the satellite makes it impossible to recover the full diurnal cycle, however. The observed effects of the thermal advection are shown to be statistically significant during the day (and presumed more convective) hours, causing a systematic increase in the poleward transport of mass and heat. The statistical results are in a qualitative agreement with the model simulations and cannot be reproduced in randomized control tests.

Levy, Gad↗
NASA NTRS1992

Thermal stratification potential in rocket engine coolant channels

The potential for rocket engine coolant channel flow stratification was computationally studied. A conjugate, 3-D, conduction/advection analysis code (SINDA/FLUINT) was used. Core fluid temperatures were predicted to vary by over 360 K across the coolant channel, at the throat section, indicating that the conventional assumption of a fully mixed fluid may be extremely inaccurate. Because of the thermal stratification of the fluid, the walls exposed to the rocket engine exhaust gases will be hotter than an assumption of full mixing would imply. In this analysis, wall temperatures were 160 K hotter in the turbulent mixing case than in the full mixing case. The discrepancy between the full mixing and turbulent mixing analyses increased with increasing heat transfer. Both analysis methods predicted identical channel resistances at the coolant inlet, but in the stratified analysis the thermal resistance was negligible. The implications are significant. Neglect of thermal stratification could lead to underpredictions in nozzle wall temperatures. Even worse, testing at subscale conditions may be inadequate for modeling conditions that would exist in a full scale engine.

Kacynski, Kenneth J.↗
NASA NTRS2007

An Improved Model of Cryogenic Propellant Stratification in a Rotating, Reduced Gravity Environment

This paper builds on a series of analytical literature models used to predict thermal stratification within rocket propellant tanks. The primary contribution to the literature is to add the effect of tank rotation and to demonstrate the influence of rotation on stratification times and temperatures. This work also looks levels of thermal stratification for generic propellant tanks (cylindrical shapes) over a parametric range of upper-stage coast times, heating levels, rotation rates, and gravity levels.

Oliveira, Justin↗
NASA NTRS1971

Two fluid model for thermal stratification in the Apollo cryogenic oxygen tanks

It is observed on Apollo flights that for oxygen densities greater than 42 lb/cu ft the heater operation time to achieve a desired pressure rise is half that which would be required if the energy were uniformly dispersed. A two fluid model was developed to describe this effect of stratification on the tank's pressurization behavior. The increase in pressure rise rate is attributed to compression of the bulk fluid in response to expansion of the heated fluid adjacent to the heater. It is assumed that during the heating operation the adjacent fluid retains nearly all the heater energy and has no mass interaction with the bulk fluid. The hot fluid temperatures predicted by the model are in reasonable correspondence with the observed heater temperatures. The model indicates that the fraction of the fluid interacting with the heater increases with decreasing density, from less than 0.1% at full tank to roughly 1% at 50% quantity, the lowest quantity at which stratification effects on pressure are observed.

Saxton, J. A.↗
NASA NTRS1968

Improved fluid dynamics similarity, analysis and verification. Part 5: Analytical and experimental studies of thermal stratification phenomena

The stratification behavior of a contained fluid subjected to transient free convection heat transfer was studied. A rectangular vessel was employed with heat transfer from two opposite walls of the vessel to the fluid. The wall temperature was increased suddenly to initiate the process and was then maintained constant throughout the transient stratification period. Thermocouples were positioned on a post at the center of the vessel. They were adjusted so that temperatures could be measured at the fluid surface and at specific depths beneath the surface. The predicted values of the surface temperature and the stratified layer thickness were found to agree reasonably well with the experimental measurements. The experiments also provided information on the transient centerline temperature distribution and the transient flow distribution.

Winter, E. R. F.↗
NASA NTRS1971

Heat transfer and thermal stratification in the Apollo 14 cryogenic oxygen tanks

Two significant facets of Apollo oxygen tank operation are the occurrence of thermal stratification at high fluid densities and the tendency toward high heater temperatures at low fluid densities. Some insight into the nature of these phenomena can be gained, respectively, by consideration of a two fluid stratification model and a conductive heat transfer model. The alternative of convective blowdown tank operation at low densities is briefly examined.

Fineblum, S. S.↗
NASA NTRS1971

Stratification calculations in a heated cryogenic oxygen storage tank at zero gravity

A cylindrical one-dimensional model of the Apollo cyrogenic oxygen storage tank has been developed to study the effect of stratification in the tank. Zero gravity was assumed, and only the thermally induced motions were considered. The governing equations were derived from conservation laws and solved on a digital computer. Realistic thermodynamic and transport properties were used. Calculations were made for a wide range of conditions. The results show the fluid behavior to be dependent on the quantity in the tank or equivalently the bulk fluid temperature. For high quantities (low temperatures) the tank pressure rose rapidly with heat addition, the heater temperature remained low, and significant pressure drop potentials accrued. For low quantities the tank pressure rose more slowly with heat addition and the heater temperature became high. A high degree of stratification resulted for all conditions; however, the stratified region extended appreciably into the tank only for the lowest tank quantity.

Shuttles, J. T.↗
NASA NTRS1973

The effect of thermal stratification and evaporation on geostrophic drag coefficient in the atmospheric boundary layer

It is shown that the fields of velocity, eddy viscosity, potential temperature, and specific humidity in a planetary boundary layer are decoupled by the introduction of a free parameter, Q, which combines the effects of thermal and humidity stratification. Solutions of the whole system are shown to be obtainable by the method of trial and error on Q. Results show good agreement when both the thermal and humidity stratification are accounted for.

Yeh, G.-T.↗
NASA NTRS1976

A canopy-related stratification of a southern pine forest using LANDSAT digital data

An investigation was undertaken to determine if a consistent stratification of a Southern pine forest could be obtained by using LANDSAT multispectral scanner data to assess crown closure. Winter and summer LANDSAT scenes of the North Carolina coastal region were analyzed individually and then registered and merged to take advantage of temporal changes in the forest canopy. Three levels of pine crown closure were accurately delineated. The applicability of this stratification as supplemental input to a forest inventory system is also discussed.

Williams, D. L.↗
NASA NTRS1976

A canopy-related stratification of a Southern pine forest using Landsat digital data

An investigation was undertaken to determine if a consistent stratification of a Southern pine forest could be obtained by using Landsat multispectral scanner data to assess crown closure. Winter and summer Landsat scenes of the North Carolina coastal region were analyzed individually and then registered and merged to take advantage of temporal changes in the forest canopy. Three levels of pine crown closure were accurately delineated. The applicability of this stratification as supplemental input to a forest inventory system is also discussed.

Williams, D. L.↗
NASA NTRS1978

Stratification and sample selection for multicrop experiments

The author has identified the following significant results. A stratification was performed and sample segments were selected for an initial investigation of multicrop problems in order to support development and evaluation of procedures for using LACIE and other technologies for the classification of corn and soybeans, to identify factors likely to affect classification performance, and to evaluate problems encountered and techniques which are applicable to the crop estimation problem in foreign countries. Two types of samples, low density and high density, supporting these requirements were selected as research data set for an initial evaluation of technical issues. Looking at the geographic location of the strata, the system appears to be logical and the various segments seem to represent different conditions. This result is supportive not only of the variables and the methodology employed in the stratification, but also of the validity of the data sets employed.

Landgrebe, D. A.↗
NASA NTRS1980

Stratification of forest vegetation for timber inventory using Landsat and collateral data

An automated forest stratification procedure based on Landsat and digital terrain data is reviewed. The system uses Landsat multispectral brightness values, a spatial texture channel, and digital terrain data information to divide Klamath National Forest vegetation into timber volume-homogeneous strata. The stratification process involves analyst-supervised class pooling editing, and the modeling of the regional type in a spatial manner using the digital terrain data. It is noted that for a given size and density class, the timber volume will change when the regional type changes, reflecting differences in growth potential.

Woodcock, C. E.↗