Search NASA⌕ Search

SEARCH · Search NASA

Results for “stratocumulus-topped boundary layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

On the Synergy Between Numerics and Subgrid Scale Modeling in LES of Stratified Flows: Grid Convergence of a Stratocumulus-Topped Boundary Layer

The effectiveness of a linear upwinding scalar advection scheme to suppress numerical dispersion errors near sharp inversions in large-eddy simulations of a nocturnal stratocumulus-topped boundary layer is assessed. Linear upwinding is a trade-off between non-dissipative and non-linear positive definite advection schemes. It is shown that linear upwinding does not negatively impact the model's grid convergence properties and a sharp inversion free of numerical artifacts is maintained. Even though mean profiles and turbulence fluxes show good grid convergence characteristics the liquid water amount varies significantly with grid resolution. The entrainment rate is identical for all resolutions and independent of the liquid water amount. For the present stratocumulus case, the impact of cloud-top radiative cooling is negligible and turbulence is largely driven by convection emanating from the surface.

Matheou, Georgios↗

Simulations of the stratocumulus-topped boundary layer with a third-order closure model

A third order closure model is proposed by Andre et al. (1982), in which the time rate of change terms, the relaxation and rapid effects for the pressure related terms, and the clipping approximation are included along with the quasi-normal closure, to study turbulence in a cloudy layer which is cooled radiatively from above. A spurious oscillation which is strongest near the inversion occurs. An analysis of the problem shows that the oscillation arises from the mean gradient and buoyancy terms of the triple moment equations; these terms are largest near the cloud top. The oscillation is physical, rather than computational. In nature the oscillation is effectively damped, by a mechanism which apparently is not included in our model. In the stably stratified layer just above the mixed layer top, turbulence can excite gravity waves, whose energy is radiated away. Because the closure assumption for the pressure terms does not take into account the transport of wave energy, the model generates spurious oscillations. Damping of the oscillations is possible by introducing diffusion terms into the triple moment equations. With a large enough choice for the diffusion coefficient, the oscillation is effectively eliminated. The results are quite sensitive to the ad hoc eddy coefficient.

Moeng, C. H.↗

Problems in simulating the stratocumulus-topped boundary layer with a third-order closure model

The Andre et al. (1976, 1978) third-order closure model, in which the time rate of change terms, the relaxation and rapid effects for pressure-related terms, and the clipping approximation are used along with the quasi-normal closure, is invoked in the study of turbulence in a cloudy layer that is radiatively cooled from above. A spurious oscillation whose greatest amplitude lies near the inversion is shown by analysis to arise from the mean gradient and buoyancy terms of the triple-moment equations. An attempt is made to damp the oscillation through the introduction of diffusion terms into the triple-moment equations. The results obtained are noted to be sensitive to the ad hoc eddy coefficient applied in the third-moment equations.

Moeng, C.-H.↗

A simple dynamical model of a stratocumulus-topped boundary layer

The evolution of a planetary boundary layer topped by stratocumulus clouds is investigated theoretically. The derivation of a simulation model based on two-dimensional shallow moist Boussinesq convection is examined in detail, and the numerical results are presented in extensive tables and maps. The horizontal asymmetry of the circulation within a convective couplet is shown to increase with cloud depth and latent heating, so that the circulation becomes detached from that of the subcloud layer when the clouds fill one-third to one-half of the domain.

Laufersweiler, Mark J.↗

Turbulence spectra of the FIRE stratocumulus-topped boundary layers

There are at least four physical phenomena which contribute to the FIRE boundary layer turbulence spectra: boundary layer spanning eddies resulting from buoyant and mechanical production of turbulent kinetic energy (the microscale subrange); inertial subrange turbulence which cascades this energy to smaller scales; quasi-two dimensional mesoscale variations; and gravity waves. The relative contributions of these four phenomena to the spectra depend on the altitude of observation and variable involved (vertical velocity, temperature and moisture spectra are discussed). The physical origins of these variations in relative contribution are discussed. As expected from the theory (Kaimal et al., 1976), mixed layer scaling of the spectra (i.e., nondimensionalizing wavelength by Z(sub i) and spectral density by Z(sub i) and the dissipation rates) is successful for the microscale subrange and inertial subrange but not for the mesoscale subrange. The most striking feature of the normalized vertical velocity spectra is the lack of any significant mesoscale contribution. The spectral peak results from buoyant and mechanical production on scales similar to the boundary layer depth. The decrease in spectral density at larger scales results from the suppression of vertical velocity perturbations with large horizontal scales by the shallowness of the atmosphere. The spectral density also decreases towards smaller scales following the well known inertial subrange slope. There is a significant variation in the shape of the normalized spectra with height.

Young, G. S.↗

A Model for Particle Microphysics, Turbulent Mixing, and Radiative Transfer in the Stratocumulus-Topped Marine Boundary Layer and Comparisons with Measurements

A detailed 1D model of the stratocumulus-topped marine boundary layer is described. The model has three coupled components: a microphysics module that resolves the size distributions of aerosols and cloud droplets, a turbulence module that treats vertical mixing between layers, and a multiple wavelength radiative transfer module that calculates radiative heating rates and cloud optical properties. The results of a 12-h model simulation reproduce reasonably well the bulk thermodynamics, microphysical properties, and radiative fluxes measured in an approx. 500-m thick, summertime marine stratocumulus cloud layer by Nicholls. However, in this case, the model predictions of turbulent fluxes between the cloud and subcloud layers exceed the measurements. Results of model simulations are also compared to measurements of a marine stratus layer made under gale conditions and with measurements of a high, thin marine stratocumulus layer. The variations in cloud properties are generally reproduced by the model, although it underpredicts the entrainment of overlying air at cloud top under gale conditions. Sensitivities of the model results are explored. The vertical profile of cloud droplet concentration is sensitive to the lower size cutoff of the droplet size distribution due to the presence of unactivated haze particles in the lower region of the modeled cloud. Increases in total droplet concentrations do not always produce less drizzle and more cloud water in the model. The radius of the mean droplet volume does not correlate consistently with drizzle, but the effective droplet radius does. The greatest impacts on cloud properties predicted by the model are produced by halving the width of the size distribution of input condensation nuclei and by omitting the effect of cloud-top radiative cooling on the condensational growth of cloud droplets. The omission of infrared scattering produces noticeable changes in cloud properties. The collection efficiencies for droplets less than 30-micrometers radius, and the value of the accommodation coefficient for condensational droplet growth, have noticeable effects on cloud properties. The divergence of the horizontal wind also has a significant effect on a 12-h model simulation of cloud structure. Conclusions drawn from the model are tentative because of the limitations of the 1D model framework. A principal simplification is that the model assumes horizontal homogeneity, and, therefore, does not resolve updrafts and downdrafts. Likely consequences of this simplification include overprediction of the growth of droplets by condensation in the upper region of the cloud, underprediction of droplet condensational growth in the lower region of the cloud, and underprediction of peak supersaturations.

Ackerman, Andrew S.↗

A Model for Particle Microphysics,Turbulent Mixing, and Radiative Transfer in the Stratocumulus-Topped Marine Boundary Layer and Comparisons with Measurements

A detailed 1D model of the stratocumulus-topped marine boundary layer is described. The model has three coupled components: a microphysics module that resolves the size distributions of aerosols and cloud droplets, a turbulence module that treats vertical mixing between layers, and a multiple wavelength radiative transfer module that calculates radiative heating rates and cloud optical properties. The results of a 12-h model simulation reproduce reasonably well the bulk thermodynamics, microphysical properties, and radiative fluxes measured in an approx. 500-m thick, summertime marine stratocumulus cloud layer by Nicholls. However, in this case, the model predictions of turbulent fluxes between the cloud and subcloud layers exceed the measurements. Results of model simulations are also compared to measurements of a marine stratus layer made under gate conditions and with measurements of a high, thin marine stratocumulus layer. The variations in cloud properties are generally reproduced by the model, although it underpredicts the entrainment of overlying air at cloud top under gale conditions. Sensitivities of the model results are explored. The vertical profile of cloud droplet concentration is sensitive to the lower size cutoff of the droplet size distribution due to the presence of unactivated haze particles in the lower region of the modeled cloud. Increases in total droplet concentrations do not always produce less drizzle and more cloud water in the model. The radius of the mean droplet volume does not correlate consistently with drizzle, but the effective droplet radius does. The greatest impacts on cloud properties predicted by the model are produced by halving the width of the size distribution of input condensation nuclei and by omitting the effect of cloud-top radiative cooling on the condensational growth of cloud droplets. The omission of infrared scattering produces noticeable changes in cloud properties. The collection efficiencies for droplets less than 30-micron radius, and the value of the accommodation coefficient for condensational droplet growth, have noticeable effects on cloud properties. The divergence of the horizontal wind also has a significant effect on a 12-h model simulation of cloud structure. Conclusions drawn from the model are tentative because of the limitations of the 1D model framework. A principal simplification is that the model assumes horizontal homogeneity, and, therefore, does not resolve updrafts and downdrafts. Likely consequences of this simplification include overprediction of the growth of droplets by condensation in the upper region of the cloud, underprediction of droplet condensational growth in the lower region of the cloud, and under-prediction of peak supersaturations.

Ackerman, Andrew S.↗

Trade-Wind Cloudiness and Climate

Closed Mesoscale Cellular Convection (MCC) consists of mesoscale cloud patches separated by narrow clear regions. Strong radiative cooling occurs at the cloud top. A dry two-dimensional Bousinesq model is used to study the effects of cloud-top cooling on convection. Wide updrafts and narrow downdrafts are used to indicate the asymmetric circulations associated with the mesoscale cloud patches. Based on the numerical results, a conceptual model was constructed to suggest a mechanism for the formation of closed MCC over cool ocean surfaces. A new method to estimate the radioative and evaporative cooling in the entrainment layer of a stratocumulus-topped boundary layer has been developed. The method was applied to a set of Large-Eddy Simulation (LES) results and to a set of tethered-balloon data obtained during FIRE. We developed a statocumulus-capped marine mixed layer model which includes a parameterization of drizzle based on the use of a predicted Cloud Condensation Nuclei (CCN) number concentration. We have developed, implemented, and tested a very elaborate new stratiform cloudiness parameterization for use in GCMs. Finally, we have developed a new, mechanistic parameterization of the effects of cloud-top cooling on the entrainment rate.

Randall, David A.↗

Large-eddy Simulation of Stratocumulus-topped Atmospheric Boundary Layers with Dynamic Subgrid-scale Models

The objective of the present study is to evaluate the dynamic procedure in LES of stratocumulus topped atmospheric boundary layer and assess the relative importance of subgrid-scale modeling, cloud microphysics and radiation modeling on the predictions. The simulations will also be used to gain insight into the processes leading to cloud top entrainment instability and cloud breakup. In this report we document the governing equations, numerical schemes and physical models that are employed in the Goddard Cumulus Ensemble model (GCEM3D). We also present the subgrid-scale dynamic procedures that have been implemented in the GCEM3D code for the purpose of the present study.

Senocak, Inane↗

Boundary layer roll circulations during FIRE

The probable mechanism underlying the development of boundary layer roll circulations are studied using wind and temperature profiles measured by the National Center for Atmospheric Research (NCAR) Electra during the stratocumulus phase of the First ISCCP Regional Experiment (FIRE). The expected, or preferred, roll orientations, horizontal wavelengths, and propagation periods are determined by finding the minimum values of the dynamic and thermodynamic forcing parameters, which here are the eddy Reynolds number (Re) and moist Rayleigh number (Ra sub m). These minimum values depend on the height z sub T of the capping temperature inversion and on the values of the Fourier coefficients of the background height-dependent vector wind profile. As input to our nonlinear spectral model, descent and ascent runs by the Electra provide for initial estimates of the inversion height and the wind profiles. In the first phase of the investigation presented here, a mechanism is said to be a probable contributor to the development of roll circulations within the stratocumulus-topped boundary layer if the modeled roll orientation and wavelengths agree with their observed values. Preliminary results using the 14-coefficient model of Haack-Hirschberg (1988) are discussed for the 7 July 1987 Electra Mission 188-A (Flight 5). This mission was flown across a sharp cloud boundary that was within a LANDSAT/SPOT scene. The stratocumulus deck was relatively solid in the eastern part of the scene, while there was a rapid decrease in cloud cover to scattered cumulus clouds aligned in streets to the west. These cloud streets were oriented nearly parallel to the mean wind direction in the layer, which was approximately 340 degrees. The hypothesis that roll circulations occurred in both the relatively clear and the cloudy regions is investigated using as model input a descent profile obtained in the relatively clear air and an ascent profile obtained in the cloudy air. Initial results for the clear air case are that the pure inflection point mode is not possible and the pure thermal mode was oriented 35 degrees to the right of the mean wind direction. The origin of this unacceptably large discrepancy between the observed and modeled results will be investigated further and the conclusions reported at the next FIRE workshop.

Shirer, Hampton N.↗

Toward a Unified Parameterization of the Boundary Layer and Moist Convection: Simulations of Clear and Cloudy Convection - Part 3

A model that employs a new form of mass-flux closure (described in Part I of this paper) is applied to a variety of clear and cloudy planetary boundary layers (PBLs) including dry convection from the Wangara Experiment, trade wind cumulus from the Barbados Oceanographic and Meteorological Experiment (BOMEX), and marine stratocumulus from the Atlantic Stratocumulus Experiment (ASTEX). For Wangara, the simulated variances and fluxes match that expected from similarity arguments, while the mean state is a little less mixed than the observations. In the BOMEX simulation. the shape and magnitude of the fluxes and the turbulence kinetic energy budget agree with LES results and observations. However, the liquid water mixing ratio is too large. This is attributed to an underprediction of the skewness. In agreement with observations from the ASTEX experiment, many of the model-simulated fields distinctly reflect a regime in transition between the trade wind cumulus and the classic stratocumulus-topped boundary layers. In general, the simulated entrainment rate tends to be a little underpredicted in regimes where there is little cloud-top radiative cooling (Wangara and BOMEX), while it is overpredicted in regimes where this process is more critical (e.g., ASTEX). Prior work suggests that this may be related to the manner in which the pressure terms are parameterized in the model. Overall, the model is able to capture some key physical features of these PBL regimes, and appears to have the potential to represent both cloud and boundary layer processes. Thus, this approach is a first step toward unifying these processes in large-scale models.

Lappen, Cara-Lyn↗

Variations in radiative heating of humid biomass burning aerosols in the southeast Atlantic from airborne observations and reanalysis

The atmosphere over the southeast Atlantic Ocean (SEA) experiences consistent springtime biomass burning (BB) smoke from widespread agricultural fires on the African continent. This smoke layer is initially lofted high in a continental mixed layer (~5-6km) and is then transported westward into the free troposphere where it overlies and ultimately mixes into a stratocumulus-topped oceanic boundary layer. Coincident with this smoke is an elevated humidity signal which is present from the time a given airmass is over the continental source region. ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) was a NASA Earth Venture Suborbital mission with the goal of measuring aerosol, cloud, and atmospheric properties over this region over three deployments in September 2016, August 2017, and October 2018. Measurements included in situ profile measurements of aerosol physical and optical properties, trace gas concentrations, and cloud properties, as well as column measurements of aerosol optical depth and trace gas concentrations from an airborne sun photometer. Here we present results from each of the ORACLES deployments over the southeast Atlantic Ocean. Despite the differing locations and season of each deployment, we show that there is good agreement between the airborne ORACLES dataset and large-scale reanalyses, specifically the ECMWF ERA5 reanalyses (and, to a degree, the CAMS product) as compared to other available products. This agreement allows us to examine multi-year seasonal patterns and trends beyond the three months with available aircraft data. In both the data and reanalysis, we find distinct variations between each deployment in terms of vertical smoke distribution and correlation to atmospheric specific humidity, due to changing conditions over the BB season. We trace the origin and the history of these smoky airmasses and finally, we briefly discuss the broader radiative and dynamical implications of these results for conditions of aerosols overlying stratocumulus clouds.

K. Pistone↗

Variation and evolution of atmospheric structure over the SEA BB season as seen from aircraft and reanalysis

The presence of absorbing aerosols and atmospheric water vapor will impact clouds both radiatively and dynamically. The atmosphere over the southeast Atlantic Ocean (SEA) experiences consistent springtime biomass burning (BB) smoke from widespread agricultural fires on the African continent. This smoke layer is initially lofted high in a continental mixed layer (~5-6km) and is then transported westward into the free troposphere where it overlies and ultimately mixes into the underlying stratocumulus-topped oceanic boundary layer. Coincident with this smoke is an elevated humidity signal which is present from the time a given airmass is over the continental source region. ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) was a NASA Earth Venture Suborbital mission with the goal of measuring aerosol, cloud, and atmospheric properties over this region over three deployments in September 2016, August 2017, and October 2018. Measurements included in situ profile measurements of aerosol physical and optical properties, trace gas concentrations, and cloud properties, as well as column measurements of aerosol optical depth and trace gas concentrations from an airborne sun photometer, allowing for calculation of radiative heating at different altitudes. Here we present results from the three ORACLES deployments over the southeast Atlantic Ocean. The airborne observations capture both seasonal patterns (August through October) and spatial patterns (north/south and east/west) in the vertical smoke distribution and its correlation to atmospheric specific humidity over the SEA basin. We describe the observed variations and show that the variability in both meteorological and emissions is largely captured in the European Centre for Medium-range Weather Forecasting Copernicus Atmosphere Monitoring Service (ECMWF CAMS) reanalysis, which allows for a more systematic examination of the relative frequency of observed conditions and their radiative impact over the region. Finally, we discuss the broader radiative and dynamical implications of these results for conditions of biomass burning aerosols overlying stratocumulus clouds.

Kristina Marie Myers Pistone↗

Springtime SEA Air Is Consistently Both Smoky and Humid, but This Relationship (and Its Radiative Effects) Varies Spatially and Seasonally

The atmosphere over the southeast Atlantic Ocean (SEA) sees a consistent springtime biomass burning (BB) smoke from widespread agricultural fires on the African continent. This smoke layer is initially lofted high in a continental mixed layer (~5-6km) and is then transported westward in the free troposphere, where it overlies and ultimately mixes into the SEA stratocumulus-topped oceanic boundary layer. Coincident with this smoke is an elevated humidity signal which is present from the time a given airmass is over the continental source region. ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) was a NASA Earth Venture Suborbital mission with the goal of measuring aerosol, cloud, and atmospheric properties over this region during three deployments in September 2016, August 2017, and October 2018. A previous study discussed the spatial characteristics of the water vapor-BB plume observations in the September 2016 flight data and their degree of agreement with several atmospheric reanalyses and models. In the present work, we first discuss atmospheric chemistry, structure, and aerosol results from all three ORACLES deployments to place these results in a broader seasonal context. Despite the differing locations and season of each deployment, we show that there continues to be good agreement between the airborne ORACLES dataset and large-scale reanalyses, specifically the ECMWF ERA5 and CAMS reanalyses. Other reanalyses (specifically NASA's MERRA-2) preserved the observed correlation between meteorology and biomass burning conditions, but, as was seen for 2016, was frequently displaced spatially relative to the observations. The CAMS reanalysis performs better with water vapor than with CO. Results comparing CAMS column AOD to the field measurements show slight overestimates, consistent with previous analysis, but the good relationship observed between AOD and inlet-based aerosol extinction demonstrates this metric's utility to broader studies. The good ERA5/CAMS/ORACLES agreement allows us to next examine the multi-year seasonal patterns and trends beyond the three ORACLES deployment periods. Looking at seven years of reanalysis data for the BB season, we find distinct variations between each month/deployment in terms of vertical smoke distribution and correlation to atmospheric specific humidity, due to changing conditions through the BB season. Using k-means clustering of these climatological reanalysis, we identify six canonical atmospheric profile types of varying total atmospheric humidity and vertical structure and describe their changing incidence spatially and throughout the season, and six analogous profile types for carbon monoxide, allowing us to characterize the atmospheric structure of both vapor and BB over time throughout the SEA region. This classification will allow for a more complete analysis of the broader radiative and dynamical effects of humid aerosols overlying stratocumulus clouds.

Kristina Marie Myers Pistone↗

The Seasonal Evolution of Atmospheric Vertical Structure of Smoke and Humidity Over the Southeast Atlantic Biomass Burning Region

The atmosphere over the southeast Atlantic Ocean (SEA) sees a consistent springtime biomass burning (BB) smoke from widespread agricultural fires on the African continent. This smoke layer is initially lofted high in a continental mixed layer (~5-6km) and is then transported westward in the free troposphere, where it overlies and ultimately mixes into the SEA stratocumulus-topped oceanic boundary layer. Coincident with this smoke is an elevated humidity signal which is present from the time a given airmass is over the continental source region; this correlation is persistent through the biomass burning season, although varying through the course of the season. ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) was a NASA Earth Venture Suborbital mission with the goal of measuring aerosol, cloud, and atmospheric properties over this region during three deployments in September 2016, August 2017, and October 2018. We use the ORACLES observations to assess this smoke-vapor relationship. First, we discuss the good agreement between the airborne ORACLES dataset and the ECMWF ERA5 and CAMS reanalyses, as well as results from NASA’s MERRA-2, as seen over the three deployment years. We then use the reanalyses to develop a framework in which to understand more broadly the radiative and dynamical interactions between the elevated smoke and water vapor over the SEA through the biomass burning season, beyond the three ORACLES observation periods. Looking at seven years of reanalysis data for the BB season, we find distinct variations between each month/deployment in terms of vertical smoke distribution and correlation to atmospheric specific humidity, due to changing conditions through the BB season. Using k-means clustering of these climatological reanalyses, we identify six canonical atmospheric profile types of varying total atmospheric humidity and vertical structure and describe their changing incidence spatially and throughout the season, and six analogous profile types for carbon monoxide, allowing us to characterize the atmospheric structure of both vapor and BB over time throughout the SEA region. The radiative heating of both aerosol and water vapor has potential to influence the cloud-top entrainment and atmospheric turbulence, thus modifying the underlying stratocumulus cloud properties. We next discuss how these smoke-humidity variations influence both the low-cloud fraction (as observed by MODIS and VIIRS, and output by ERA5) and the boundary layer height in the region. This classification will ultimately allow for a more complete analysis of the broader radiative and dynamical effects of humid aerosols overlying stratocumulus clouds.

Kristina Marie Myers Pistone↗

Plume mechanics and stratocumulus convection

The First ISCCP Regional Experiment (FIRE) marine stratocumulus Intensive Field Observation (IFO) held in July, 1987 produced a data set that is far more comprehensive than data sets from previous stratocumulus experiments. One exciting new development was the use of the 10.6 micron lidar system for cloud-top mapping that was available on the National Center for Atmospheric Research (NCAR) Electra. This system provided a unique look at the small scales of the turbulence in the clouds, images of the turbulent structures that are quantitatively revealed by conditional sampling (e.g., Khalsa and Greenhut, 1987). The behavior of these updrafts and downdrafts is central to the dynamics of the stratocumulus-topped marine boundary layer. FIRE's objectives of understanding cloud dynamics and how they affect the cloud optical depth - which, in turn, is the crucial factor in determining the clouds' albedo - therefore require the investigation of these drafts. Given here are initial results from a simple model capable of simulating moist, entraining plumes that are subject to water phase changes and radiative heating and cooling. These results correspond, therefore, to the 'dry cloud' case discussed by Lilly and Schubert (1980). The model's simplicity limits the realism of the results - the plumes are assumed not to interact, for example - but the role of radiative processes in influencing the plume dynamics is clear. Also revealed is the role the plumes play is maintaining the cloud-top inversion. The model equations and methodology used, and qualitative results are given.

Hanson, Howard P.↗