Search NASA⌕ Search

SEARCH · Search NASA

Results for “subspace method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Parameter Reduction of Composite Load Model Using Active Subspace Method

Over the past decades, the increasing penetration of distributed energy resources (DERs) has dramatically changed the power load composition in the distribution networks. The traditional static and dynamic load models can hardly capture the dynamic behavior of modern loads especially for fault-induced delayed voltage recovery (FIDVR) events. Thus, a more comprehensive composite load model with combination of static load, different types of induction motors, single-phase A/C motor, electronic load and DERs has been proposed by Western Electricity Coordinating Council (WECC). However, due to the large number of parameters and model complexity, the WECC composite load model (WECC CMLD) raises new challenges to power system studies. To overcome these challenges, in this paper, a cutting-edge parameter reduction (PR) approach for WECC CMLD based on active subspace method (ASM) is proposed. Firstly, the WECC CMLD is parameterized in a discrete-time manner for the application of the proposed method. Then, parameter sensitivities are calculated by discovering the active subspace, which is a lower-dimensional linear subspace of the parameter space of WECC CMLD in which the dynamic response is most sensitive. The interdependency among parameters can be taken into consideration by our approach. Finally, the numerical experiments validate the effectiveness and advantages of the proposed approach for WECC CMLD model.

active subspace↗

Block Krylov Subspace Methods for Functions of Matrices II: Modified Block FOM

We analyze an expansion of the generalized block Krylov subspace framework of [Electron. Trans. Numer. Anal., 47 (2017), pp. 100--126]. This expansion allows the use of low-rank modifications of the matrix projected onto the block Krylov subspace and contains, as special cases, the block GMRES method and the new block Radau--Arnoldi method. Within this general setting, we present results that extend the interpolation property from the nonblock case to a matrix polynomial interpolation property for the block case, and we relate the eigenvalues of the projected matrix to the latent roots of these matrix polynomials. Some error bounds for these modified block FOM methods for solving linear systems are presented. We then show how cospatial residuals can be preserved in the case of families of shifted linear block systems. This result is used to derive computationally practical restarted algorithms for block Krylov approximations that compute the action of a matrix function on a set of several vectors simultaneously. Finally, we prove some error bounds and present numerical results showing that two modifications of FOM, the block harmonic and the block Radau--Arnoldi methods for matrix functions, can significantly improve the convergence behavior.

97 MATHEMATICS AND COMPUTING↗

Overview of Krylov subspace methods with applications to control problems

An overview of projection methods based on Krylov subspaces are given with emphasis on their application to solving matrix equations that arise in control problems. The main idea of Krylov subspace methods is to generate a basis of the Krylov subspace Span and seek an approximate solution the the original problem from this subspace. Thus, the original matrix problem of size N is approximated by one of dimension m typically much smaller than N. Krylov subspace methods have been very successful in solving linear systems and eigenvalue problems and are now just becoming popular for solving nonlinear equations. It is shown how they can be used to solve partial pole placement problems, Sylvester's equation, and Lyapunov's equation.

Saad, Youcef↗

Active Subspace Methods for Data-Intensive Inverse Problems

Fostered by advances in computing, simulation and data science have emerged as the third and fourth paradigms enabling scientific discovery. Many mathematical challenges arise when integrating these paradigms to produce new knowledge. One of the most important challenges is the inverse or calibration problem: find the inputs of a simulation such that its outputs agree with a given set of measurements. As both the cost of the complex simulations and the volume of measurement data sets increase, intuition-driven trial-and-error methods for calibration quickly become untenable; modern scientists need more computationally efficient and mathematically rigorous methods. When measurements and simulated predictions contain uncertainty, the Bayesian perspective on statistical inference provides a popular mathematical framework for developing computational methods to solve inverse problems. Markov chain Monte Carlo (MCMC) methods are a mainstay of this framework; they characterize a probability distribution on the space of model inputs that is conditioned on the given measurements. However, despite recent advances, MCMC methods remain impractical for expensive simulations with more than a handful of inputs. At its heart, MCMC searches the space of inputs for corresponding outputs that match measurements, and so it is afflicted with the curse of dimensionality. Additionally, MCMC methods become less efficient as the volume of the measurement data increases, particularly if the measurements are redundant. To make MCMC—and Bayesian methods, in general—amenable to today’s computer models with millions of inputs and terabytes of measurement data, one must devise methods to reduce the dimension of both the simulation inputs and the measurements. For many models used in practice, the outputs vary primarily on a low-dimensional manifold of the nominally high-dimensional input space. Recently developed active subspace methods discover this low-dimensional manifold and exploit it to enable analyses typically suited for low-dimensional settings (e.g., statistical inversion of complex systems). We hypothesize that active subspace methods can provide the necessary dimension reduction, enabling existing Bayesian methods to find solutions for a large class of otherwise intractable statistical inverse problems. We will test the hypothesis with a series of mathematical analyses and computational experiments that will proceed along three research veins: (i) integrating active subspace methods into methods for statistical inversion, (ii) addressing current challenges in active subspace methods, and (iii) incorporating methods for nonlinear dimensionality reduction into active subspace methods. We will apply the methods we develop to real inverse problems in chemical kinetics and turbulent flame modeling. Our team combines expertise in methods for inverse problems, dimension reduction, and reduced order modeling. With a history of active collaboration and thoughtful engagement, we bring enthusiasm and fresh perspectives to a well studied subject. We are excited by the potential opportunity to work together to extend and apply active subspace methods to data-intensive inverse problems.

97 MATHEMATICS AND COMPUTING↗

Active Subspace Methods for Data-Intensive Inverse Problems (Final Report)

Fostered by advances in computing, simulation and data science have emerged as the third and fourth paradigms enabling scientific discovery. Many mathematical challenges arise when integrating these paradigms to produce new knowledge. One of the most important challenges is the inverse or calibration problem: find the inputs of a simulation such that its outputs agree with a given set of measurements. As both the cost of the complex simulations and the volume of measurement data sets increase, intuition-driven trial-and-error methods for calibration quickly become untenable; modern scientists need more computationally efficient and mathematically rigorous methods. When measurements and simulated predictions contain uncertainty, the Bayesian perspective on statistical inference provides a popular mathematical framework for developing computational methods to solve inverse problems. Markov chain Monte Carlo (MCMC) methods are a mainstay of this framework; they characterize a probability distribution on the space of model inputs that is conditioned on the given measurements. However, despite recent advances, MCMC methods remain impractical for expensive simulations with more than a handful of inputs. At its heart, MCMC searches the space of inputs for corresponding outputs that match measurements, and so it is afflicted with the curse of dimensionality. Additionally, MCMC methods become less efficient as the volume of the measurement data increases, particularly if the measurements are redundant. To make MCMC—and Bayesian methods, in general—amenable to today’s computer models with millions of inputs and terabytes of measurement data, one must devise methods to reduce the dimension of both the simulation inputs and the measurements. For many models used in practice, the outputs vary primarily on a low-dimensional manifold of the nominally high-dimensional input space. Recently developed active subspace methods discover this low-dimensional manifold and exploit it to enable analyses typically suited for low-dimensional settings (e.g., statistical inversion of complex systems). We hypothesize that active subspace methods can provide the necessary dimension reduction, enabling existing Bayesian methods to find solutions for a large class of otherwise intractable statistical inverse problems. We will test the hypothesis with a series of mathematical analyses and computational experiments that will proceed along three research veins: (i) integrating active subspace methods into methods for statistical inversion, (ii) addressing current challenges in active subspace methods, and (iii) incorporating methods for nonlinear dimensionality reduction into active subspace methods. We will apply the methods we develop to real inverse problems in chemical kinetics and turbulent flame modeling. Our team combines expertise in methods for inverse problems, dimension reduction, and reduced order modeling. With a history of active collaboration and thoughtful engagement, we bring enthusiasm and fresh perspectives to a well studied subject. We are excited by the potential opportunity to work together to extend and apply active subspace methods to data-intensive inverse problems.

97 MATHEMATICS AND COMPUTING↗

Subspace Methods in Multi-Parameter Seismic Full Waveform Inversion

In full waveform inversion (FWI) high-resolution subsurface model parameters are sought. FWI is normally treated as a nonlinear least-squares inverse problem, in which the minimum of the corresponding misfit function is found by updating the model parameters. When multiple elastic or acoustic properties are solved for, simple gradient methods tend to confuse parameter classes. This is referred to as parameter cross-talk; it leads to incorrect model solutions, poor convergence and strong dependence on the scaling of the different parameter types. Determining step lengths in a subspace domain, rather than directly in terms of gradients of different parameters, is a potentially valuable approach to address this problem. The particular subspace used can be defined over a span of different sets of data or different parameter classes, provided it involves a small number of vectors compared to those contained in the whole model space. Additionally, in a subspace method, the basis vectors are defined first, and a local minimum is found in the space spanned by these. We examine the application of the subspace method within acoustic FWI in determining simultaneously updates for velocity and density. We first discuss the choice of basis vectors to construct the spanned space, from linear updates by distinguishing only the contributions of different parameter classes towards nonlinear updates by adding the contributions of higher-order perturbations of each parameter class. The numerical character of FWI solutions generated via subspace methods involving different basis vectors is then analyzed and compared with traditional FWI methods. The subspace methods can provide better reconstructions of the model, especially for the velocity, as well as improved convergence rates, while the computational costs are still comparable with the traditional FWI methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multigrid and Krylov Subspace Methods for Transport Equations: Absorption Case

In this paper we look at Krylov subspace methods for solving the transport equations in a slab geometry. The spatial discretization scheme used is a finite element method called Modified Linear Discontinuous scheme (MLD). We investigate the convergence rates for a number of Krylov subspace methods for this problem and compare with the results of a spatial multigrid scheme.

Oliveira, S.↗

Krylov Subspace Methods for Complex Non-Hermitian Linear Systems

We consider Krylov subspace methods for the solution of large sparse linear systems Ax = b with complex non-Hermitian coefficient matrices. Such linear systems arise in important applications, such as inverse scattering, numerical solution of time-dependent Schrodinger equations, underwater acoustics, eddy current computations, numerical computations in quantum chromodynamics, and numerical conformal mapping. Typically, the resulting coefficient matrices A exhibit special structures, such as complex symmetry, or they are shifted Hermitian matrices. In this paper, we first describe a Krylov subspace approach with iterates defined by a quasi-minimal residual property, the QMR method, for solving general complex non-Hermitian linear systems. Then, we study special Krylov subspace methods designed for the two families of complex symmetric respectively shifted Hermitian linear systems. We also include some results concerning the obvious approach to general complex linear systems by solving equivalent real linear systems for the real and imaginary parts of x. Finally, numerical experiments for linear systems arising from the complex Helmholtz equation are reported.

Freund, Roland W.↗

Krylov subspace methods - Theory, algorithms, and applications

Projection methods based on Krylov subspaces for solving various types of scientific problems are reviewed. The main idea of this class of methods when applied to a linear system Ax = b, is to generate in some manner an approximate solution to the original problem from the so-called Krylov subspace span. Thus, the original problem of size N is approximated by one of dimension m, typically much smaller than N. Krylov subspace methods have been very successful in solving linear systems and eigenvalue problems and are now becoming popular for solving nonlinear equations. The main ideas in Krylov subspace methods are shown and their use in solving linear systems, eigenvalue problems, parabolic partial differential equations, Liapunov matrix equations, and nonlinear system of equations are discussed.

Sad, Youcef↗

Krylov Subspace Methods for Quantum Dynamics with Time-Dependent Generators

Krylov subspace methods in quantum dynamics identify the minimal subspace in which a process unfolds. To date, their use is restricted to time evolutions governed by time-independent generators. Here, we introduce a generalization valid for driven quantum systems governed by a time-dependent Hamiltonian that maps the evolution to a diffusion problem in a one-dimensional lattice with nearest-neighbor hopping probabilities that are inhomogeneous and time dependent. This representation is used to establish a novel class of fundamental limits to the quantum speed of evolution and operator growth. We also discuss generalizations of the algorithm, adapted to discretized time evolutions and periodic Hamiltonians, with applications to many-body systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Krylov subspace methods on supercomputers

A short survey of recent research on Krylov subspace methods with emphasis on implementation on vector and parallel computers is presented. Conjugate gradient methods have proven very useful on traditional scalar computers, and their popularity is likely to increase as three-dimensional models gain importance. A conservative approach to derive effective iterative techniques for supercomputers has been to find efficient parallel/vector implementations of the standard algorithms. The main source of difficulty in the incomplete factorization preconditionings is in the solution of the triangular systems at each step. A few approaches consisting of implementing efficient forward and backward triangular solutions are described in detail. Polynomial preconditioning as an alternative to standard incomplete factorization techniques is also discussed. Another efficient approach is to reorder the equations so as to improve the structure of the matrix to achieve better parallelism or vectorization. An overview of these and other ideas and their effectiveness or potential for different types of architectures is given.

Saad, Youcef↗

s-Step Krylov Subspace Methods as Bottom Solvers for Geometric Multigrid

Geometric multigrid solvers within adaptive mesh refinement (AMR) applications often reach a point where further coarsening of the grid becomes impractical as individual sub domain sizes approach unity. At this point the most common solution is to use a bottom solver, such as BiCGStab, to reduce the residual by a fixed factor at the coarsest level. Each iteration of BiCGStab requires multiple global reductions (MPI collectives). As the number of BiCGStab iterations required for convergence grows with problem size, and the time for each collective operation increases with machine scale, bottom solves in large-scale applications can constitute a significant fraction of the overall multigrid solve time. In this paper, we implement, evaluate, and optimize a communication-avoiding s-step formulation of BiCGStab (CABiCGStab for short) as a high-performance, distributed-memory bottom solver for geometric multigrid solvers. This is the first time s-step Krylov subspace methods have been leveraged to improve multigrid bottom solver performance. We use a synthetic benchmark for detailed analysis and integrate the best implementation into BoxLib in order to evaluate the benefit of a s-step Krylov subspace method on the multigrid solves found in the applications LMC and Nyx on up to 32,768 cores on the Cray XE6 at NERSC. Overall, we see bottom solver improvements of up to 4.2x on synthetic problems and up to 2.7x in real applications. This results in as much as a 1.5x improvement in solver performance in real applications.

97 MATHEMATICS AND COMPUTING↗

A methodology for generating reduced-order models for large-scale buildings using the Krylov subspace method

Developing a computationally efficient but accurate building energy simulation (BES) model is important for many purposes. Model order reduction (MOR) methods are attractive and much more reliable than identification approaches, since it directly extract a lower-dimensional model from a detailed physics-based model without any pre-simulations. However, because of computational and data storage requirements, there are challenges of applying these methods to a large-scale building. To overcome the problem, this work introduces the Krylov subspace method to the building science field. Technical issues of applying the method to building applications are addressed and a suitable algorithm that overcomes those challenges is presented. Furthermore, to demonstrate the reliability of the algorithm, comparisons between the resulted reduced-order model (ROM) and a high-fidelity model from a commercial BES software for a 60-zone case study building are provided. The ROM was a factor of 100 faster than the high fidelity model but with high accuracy.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Preliminary Theoretical Analysis of Mixed Precision Krylov Subspace Methods (Q3 Report)

The third quarter of the project was spent performing theoretical finite precision analysis of Krylov subspace method variants that use mixed precision. Our focus here is on the Conjugate Gradient (CG) method and the Lanczos method. We have performed an analysis of maximum attainable accuracy for the classical CG method in which 3 precisions are used: a working precision ε, a precision ε IP for the inner product computations, and a precision ε MV for the matrix-vector products. Our results show that performing inner product computations in lower precision does not affect the attainable accuracy. Further, we have performed a complete error analysis of the s-step Lanczos algorithm. In this case, we show that the numerical behavior of the algorithm can be significantly improved by using extra precision in a small part of the computation. We summarize the main theorems in the remainder of the document. Other activities include attending biweekly xSDK meetings. The subsequent quarter will be spent finalizing these results into technical reports and/or manuscripts for submission to journals, as well as identifying opportunities for future work.

97 MATHEMATICS AND COMPUTING↗

Reduced scaling formulation of CASPT2 analytical gradients using the supporting subspace method

We present a reduced scaling and exact reformulation of state specific complete active space second-order perturbation (CASPT2) analytical gradients in terms of the MP2 and Fock derivatives using the supporting subspace method. This work follows naturally from the supporting subspace formulation of the CASPT2 energy in terms of the MP2 energy using dressed orbitals and Fock builds. For a given active space configuration, the terms corresponding to the MP2-gradient can be evaluated with O(N5) operations, while the rest of the calculations can be computed with O(N3) operations using Fock builds, Fock gradients, and linear algebra. When tensor-hyper-contraction is applied simultaneously, the computational cost can be further reduced to O(N4) for a fixed active space size. The new formulation enables efficient implementation of CASPT2 analytical gradients by leveraging the existing graphical processing unit (GPU)-based MP2 and Fock routines. We present benchmark results that demonstrate the accuracy and performance of the new method. Example applications of the new method in ab initio molecular dynamics simulation and constrained geometry optimization are given.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Co-Active Subspace Methods for the Joint Analysis of Adjacent Computer Models

Active subspace (AS) methods are a valuable tool for understanding the relationship between the inputs and outputs of a Physics simulation. In this article, an elegant generalization of the traditional ASM is developed to assess the co-activity of two computer models. This generalization, which we refer to as a Co-Active Subspace (Co-AS) Method, allows for the joint analysis of two or more computer models allowing for thorough exploration of the alignment (or non-alignment) of the respective gradient spaces. We define co-active directions, co-sensitivity indices, and a scalar “concordance” metric (and complementary “discordance” pseudo-metric) and we demonstrate that these are powerful tools for understanding the behavior of a class of computer models, especially when used to supplement traditional AS analysis. Details for efficient estimation of the Co-AS and an accompanying R package (concordance) are provided. Practical application is demonstrated through analyzing a set of simulated rate stick experiments for PBX 9501, a high explosive, offering insights into complex model dynamics.

97 MATHEMATICS AND COMPUTING↗

Application of vector-valued rational approximations to the matrix eigenvalue problem and connections with Krylov subspace methods

Let F(z) be a vectored-valued function F: C approaches C sup N, which is analytic at z=0 and meromorphic in a neighborhood of z=0, and let its Maclaurin series be given. We use vector-valued rational approximation procedures for F(z) that are based on its Maclaurin series in conjunction with power iterations to develop bona fide generalizations of the power method for an arbitrary N X N matrix that may be diagonalizable or not. These generalizations can be used to obtain simultaneously several of the largest distinct eigenvalues and the corresponding invariant subspaces, and present a detailed convergence theory for them. In addition, it is shown that the generalized power methods of this work are equivalent to some Krylov subspace methods, among them the methods of Arnoldi and Lanczos. Thus, the theory provides a set of completely new results and constructions for these Krylov subspace methods. This theory suggests at the same time a new mode of usage for these Krylov subspace methods that were observed to possess computational advantages over their common mode of usage.

Sidi, Avram↗

An Active Subspace Method for Accelerating Convergence in Delaunay-Based Optimization via Dimension Reduction

Delaunay-based derivative-free optimization, ∆DOGS, is an efficient and provably-convergent global optimization method for the problems which has computationally expensive objection function and the analytical expression for the objective function is not available. ∆-DOGS is a novel optimization scheme in the family of response surface methods (RSMs); however, it suffers from the curse of dimensionality since the computational cost increases dramatically as the number of design parameters increases. As a result, the number of design parameters in ∆-DOGS algorithm is relatively low (n.10). To avoid such problems, this paper proposes a combination of derivative-free optimization, seeking the global minimizer of an expensive and nonconvex objective function f(x) and active subspace method, detecting the directions of the most variability using evaluations of the gradient. The contribution of other directions to the objective function is bounded by a sufficiently small constant. This new algorithm iteratively applied Delaunay-based derivative-free optimization to seek the minimizer on the d-dimensional active subspace that has most function variation. Inverse mapping is needed to project data from active subspace to full-model for evaluating function values. This task is overcome by solving an inequality constrained problem that curves the response surface of the objective function. The test results show that this strategy is effective on a handful of optimization problems.

Bewley, Thomas R.↗