Search NASA⌕ Search

SEARCH · Search NASA

Results for “subspace method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Parameter Reduction of Composite Load Model Using Active Subspace Method

Over the past decades, the increasing penetration of distributed energy resources (DERs) has dramatically changed the power load composition in the distribution networks. The traditional static and dynamic load models can hardly capture the dynamic behavior of modern loads especially for fault-induced delayed voltage recovery (FIDVR) events. Thus, a more comprehensive composite load model with combination of static load, different types of induction motors, single-phase A/C motor, electronic load and DERs has been proposed by Western Electricity Coordinating Council (WECC). However, due to the large number of parameters and model complexity, the WECC composite load model (WECC CMLD) raises new challenges to power system studies. To overcome these challenges, in this paper, a cutting-edge parameter reduction (PR) approach for WECC CMLD based on active subspace method (ASM) is proposed. Firstly, the WECC CMLD is parameterized in a discrete-time manner for the application of the proposed method. Then, parameter sensitivities are calculated by discovering the active subspace, which is a lower-dimensional linear subspace of the parameter space of WECC CMLD in which the dynamic response is most sensitive. The interdependency among parameters can be taken into consideration by our approach. Finally, the numerical experiments validate the effectiveness and advantages of the proposed approach for WECC CMLD model.

active subspace↗

Block Krylov Subspace Methods for Functions of Matrices II: Modified Block FOM

We analyze an expansion of the generalized block Krylov subspace framework of [Electron. Trans. Numer. Anal., 47 (2017), pp. 100--126]. This expansion allows the use of low-rank modifications of the matrix projected onto the block Krylov subspace and contains, as special cases, the block GMRES method and the new block Radau--Arnoldi method. Within this general setting, we present results that extend the interpolation property from the nonblock case to a matrix polynomial interpolation property for the block case, and we relate the eigenvalues of the projected matrix to the latent roots of these matrix polynomials. Some error bounds for these modified block FOM methods for solving linear systems are presented. We then show how cospatial residuals can be preserved in the case of families of shifted linear block systems. This result is used to derive computationally practical restarted algorithms for block Krylov approximations that compute the action of a matrix function on a set of several vectors simultaneously. Finally, we prove some error bounds and present numerical results showing that two modifications of FOM, the block harmonic and the block Radau--Arnoldi methods for matrix functions, can significantly improve the convergence behavior.

97 MATHEMATICS AND COMPUTING↗

Active Subspace Methods for Data-Intensive Inverse Problems

Fostered by advances in computing, simulation and data science have emerged as the third and fourth paradigms enabling scientific discovery. Many mathematical challenges arise when integrating these paradigms to produce new knowledge. One of the most important challenges is the inverse or calibration problem: find the inputs of a simulation such that its outputs agree with a given set of measurements. As both the cost of the complex simulations and the volume of measurement data sets increase, intuition-driven trial-and-error methods for calibration quickly become untenable; modern scientists need more computationally efficient and mathematically rigorous methods. When measurements and simulated predictions contain uncertainty, the Bayesian perspective on statistical inference provides a popular mathematical framework for developing computational methods to solve inverse problems. Markov chain Monte Carlo (MCMC) methods are a mainstay of this framework; they characterize a probability distribution on the space of model inputs that is conditioned on the given measurements. However, despite recent advances, MCMC methods remain impractical for expensive simulations with more than a handful of inputs. At its heart, MCMC searches the space of inputs for corresponding outputs that match measurements, and so it is afflicted with the curse of dimensionality. Additionally, MCMC methods become less efficient as the volume of the measurement data increases, particularly if the measurements are redundant. To make MCMC—and Bayesian methods, in general—amenable to today’s computer models with millions of inputs and terabytes of measurement data, one must devise methods to reduce the dimension of both the simulation inputs and the measurements. For many models used in practice, the outputs vary primarily on a low-dimensional manifold of the nominally high-dimensional input space. Recently developed active subspace methods discover this low-dimensional manifold and exploit it to enable analyses typically suited for low-dimensional settings (e.g., statistical inversion of complex systems). We hypothesize that active subspace methods can provide the necessary dimension reduction, enabling existing Bayesian methods to find solutions for a large class of otherwise intractable statistical inverse problems. We will test the hypothesis with a series of mathematical analyses and computational experiments that will proceed along three research veins: (i) integrating active subspace methods into methods for statistical inversion, (ii) addressing current challenges in active subspace methods, and (iii) incorporating methods for nonlinear dimensionality reduction into active subspace methods. We will apply the methods we develop to real inverse problems in chemical kinetics and turbulent flame modeling. Our team combines expertise in methods for inverse problems, dimension reduction, and reduced order modeling. With a history of active collaboration and thoughtful engagement, we bring enthusiasm and fresh perspectives to a well studied subject. We are excited by the potential opportunity to work together to extend and apply active subspace methods to data-intensive inverse problems.

97 MATHEMATICS AND COMPUTING↗

Active Subspace Methods for Data-Intensive Inverse Problems (Final Report)

Fostered by advances in computing, simulation and data science have emerged as the third and fourth paradigms enabling scientific discovery. Many mathematical challenges arise when integrating these paradigms to produce new knowledge. One of the most important challenges is the inverse or calibration problem: find the inputs of a simulation such that its outputs agree with a given set of measurements. As both the cost of the complex simulations and the volume of measurement data sets increase, intuition-driven trial-and-error methods for calibration quickly become untenable; modern scientists need more computationally efficient and mathematically rigorous methods. When measurements and simulated predictions contain uncertainty, the Bayesian perspective on statistical inference provides a popular mathematical framework for developing computational methods to solve inverse problems. Markov chain Monte Carlo (MCMC) methods are a mainstay of this framework; they characterize a probability distribution on the space of model inputs that is conditioned on the given measurements. However, despite recent advances, MCMC methods remain impractical for expensive simulations with more than a handful of inputs. At its heart, MCMC searches the space of inputs for corresponding outputs that match measurements, and so it is afflicted with the curse of dimensionality. Additionally, MCMC methods become less efficient as the volume of the measurement data increases, particularly if the measurements are redundant. To make MCMC—and Bayesian methods, in general—amenable to today’s computer models with millions of inputs and terabytes of measurement data, one must devise methods to reduce the dimension of both the simulation inputs and the measurements. For many models used in practice, the outputs vary primarily on a low-dimensional manifold of the nominally high-dimensional input space. Recently developed active subspace methods discover this low-dimensional manifold and exploit it to enable analyses typically suited for low-dimensional settings (e.g., statistical inversion of complex systems). We hypothesize that active subspace methods can provide the necessary dimension reduction, enabling existing Bayesian methods to find solutions for a large class of otherwise intractable statistical inverse problems. We will test the hypothesis with a series of mathematical analyses and computational experiments that will proceed along three research veins: (i) integrating active subspace methods into methods for statistical inversion, (ii) addressing current challenges in active subspace methods, and (iii) incorporating methods for nonlinear dimensionality reduction into active subspace methods. We will apply the methods we develop to real inverse problems in chemical kinetics and turbulent flame modeling. Our team combines expertise in methods for inverse problems, dimension reduction, and reduced order modeling. With a history of active collaboration and thoughtful engagement, we bring enthusiasm and fresh perspectives to a well studied subject. We are excited by the potential opportunity to work together to extend and apply active subspace methods to data-intensive inverse problems.

97 MATHEMATICS AND COMPUTING↗

Subspace Methods in Multi-Parameter Seismic Full Waveform Inversion

In full waveform inversion (FWI) high-resolution subsurface model parameters are sought. FWI is normally treated as a nonlinear least-squares inverse problem, in which the minimum of the corresponding misfit function is found by updating the model parameters. When multiple elastic or acoustic properties are solved for, simple gradient methods tend to confuse parameter classes. This is referred to as parameter cross-talk; it leads to incorrect model solutions, poor convergence and strong dependence on the scaling of the different parameter types. Determining step lengths in a subspace domain, rather than directly in terms of gradients of different parameters, is a potentially valuable approach to address this problem. The particular subspace used can be defined over a span of different sets of data or different parameter classes, provided it involves a small number of vectors compared to those contained in the whole model space. Additionally, in a subspace method, the basis vectors are defined first, and a local minimum is found in the space spanned by these. We examine the application of the subspace method within acoustic FWI in determining simultaneously updates for velocity and density. We first discuss the choice of basis vectors to construct the spanned space, from linear updates by distinguishing only the contributions of different parameter classes towards nonlinear updates by adding the contributions of higher-order perturbations of each parameter class. The numerical character of FWI solutions generated via subspace methods involving different basis vectors is then analyzed and compared with traditional FWI methods. The subspace methods can provide better reconstructions of the model, especially for the velocity, as well as improved convergence rates, while the computational costs are still comparable with the traditional FWI methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Krylov Subspace Methods for Quantum Dynamics with Time-Dependent Generators

Krylov subspace methods in quantum dynamics identify the minimal subspace in which a process unfolds. To date, their use is restricted to time evolutions governed by time-independent generators. Here, we introduce a generalization valid for driven quantum systems governed by a time-dependent Hamiltonian that maps the evolution to a diffusion problem in a one-dimensional lattice with nearest-neighbor hopping probabilities that are inhomogeneous and time dependent. This representation is used to establish a novel class of fundamental limits to the quantum speed of evolution and operator growth. We also discuss generalizations of the algorithm, adapted to discretized time evolutions and periodic Hamiltonians, with applications to many-body systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

s-Step Krylov Subspace Methods as Bottom Solvers for Geometric Multigrid

Geometric multigrid solvers within adaptive mesh refinement (AMR) applications often reach a point where further coarsening of the grid becomes impractical as individual sub domain sizes approach unity. At this point the most common solution is to use a bottom solver, such as BiCGStab, to reduce the residual by a fixed factor at the coarsest level. Each iteration of BiCGStab requires multiple global reductions (MPI collectives). As the number of BiCGStab iterations required for convergence grows with problem size, and the time for each collective operation increases with machine scale, bottom solves in large-scale applications can constitute a significant fraction of the overall multigrid solve time. In this paper, we implement, evaluate, and optimize a communication-avoiding s-step formulation of BiCGStab (CABiCGStab for short) as a high-performance, distributed-memory bottom solver for geometric multigrid solvers. This is the first time s-step Krylov subspace methods have been leveraged to improve multigrid bottom solver performance. We use a synthetic benchmark for detailed analysis and integrate the best implementation into BoxLib in order to evaluate the benefit of a s-step Krylov subspace method on the multigrid solves found in the applications LMC and Nyx on up to 32,768 cores on the Cray XE6 at NERSC. Overall, we see bottom solver improvements of up to 4.2x on synthetic problems and up to 2.7x in real applications. This results in as much as a 1.5x improvement in solver performance in real applications.

97 MATHEMATICS AND COMPUTING↗

A methodology for generating reduced-order models for large-scale buildings using the Krylov subspace method

Developing a computationally efficient but accurate building energy simulation (BES) model is important for many purposes. Model order reduction (MOR) methods are attractive and much more reliable than identification approaches, since it directly extract a lower-dimensional model from a detailed physics-based model without any pre-simulations. However, because of computational and data storage requirements, there are challenges of applying these methods to a large-scale building. To overcome the problem, this work introduces the Krylov subspace method to the building science field. Technical issues of applying the method to building applications are addressed and a suitable algorithm that overcomes those challenges is presented. Furthermore, to demonstrate the reliability of the algorithm, comparisons between the resulted reduced-order model (ROM) and a high-fidelity model from a commercial BES software for a 60-zone case study building are provided. The ROM was a factor of 100 faster than the high fidelity model but with high accuracy.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Preliminary Theoretical Analysis of Mixed Precision Krylov Subspace Methods (Q3 Report)

The third quarter of the project was spent performing theoretical finite precision analysis of Krylov subspace method variants that use mixed precision. Our focus here is on the Conjugate Gradient (CG) method and the Lanczos method. We have performed an analysis of maximum attainable accuracy for the classical CG method in which 3 precisions are used: a working precision ε, a precision ε IP for the inner product computations, and a precision ε MV for the matrix-vector products. Our results show that performing inner product computations in lower precision does not affect the attainable accuracy. Further, we have performed a complete error analysis of the s-step Lanczos algorithm. In this case, we show that the numerical behavior of the algorithm can be significantly improved by using extra precision in a small part of the computation. We summarize the main theorems in the remainder of the document. Other activities include attending biweekly xSDK meetings. The subsequent quarter will be spent finalizing these results into technical reports and/or manuscripts for submission to journals, as well as identifying opportunities for future work.

97 MATHEMATICS AND COMPUTING↗

Reduced scaling formulation of CASPT2 analytical gradients using the supporting subspace method

We present a reduced scaling and exact reformulation of state specific complete active space second-order perturbation (CASPT2) analytical gradients in terms of the MP2 and Fock derivatives using the supporting subspace method. This work follows naturally from the supporting subspace formulation of the CASPT2 energy in terms of the MP2 energy using dressed orbitals and Fock builds. For a given active space configuration, the terms corresponding to the MP2-gradient can be evaluated with O(N5) operations, while the rest of the calculations can be computed with O(N3) operations using Fock builds, Fock gradients, and linear algebra. When tensor-hyper-contraction is applied simultaneously, the computational cost can be further reduced to O(N4) for a fixed active space size. The new formulation enables efficient implementation of CASPT2 analytical gradients by leveraging the existing graphical processing unit (GPU)-based MP2 and Fock routines. We present benchmark results that demonstrate the accuracy and performance of the new method. Example applications of the new method in ab initio molecular dynamics simulation and constrained geometry optimization are given.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Co-Active Subspace Methods for the Joint Analysis of Adjacent Computer Models

Active subspace (AS) methods are a valuable tool for understanding the relationship between the inputs and outputs of a Physics simulation. In this article, an elegant generalization of the traditional ASM is developed to assess the co-activity of two computer models. This generalization, which we refer to as a Co-Active Subspace (Co-AS) Method, allows for the joint analysis of two or more computer models allowing for thorough exploration of the alignment (or non-alignment) of the respective gradient spaces. We define co-active directions, co-sensitivity indices, and a scalar “concordance” metric (and complementary “discordance” pseudo-metric) and we demonstrate that these are powerful tools for understanding the behavior of a class of computer models, especially when used to supplement traditional AS analysis. Details for efficient estimation of the Co-AS and an accompanying R package (concordance) are provided. Practical application is demonstrated through analyzing a set of simulated rate stick experiments for PBX 9501, a high explosive, offering insights into complex model dynamics.

97 MATHEMATICS AND COMPUTING↗

A comparison of preconditioned Krylov subspace methods for large‐scale nonsymmetric linear systems

Summary Preconditioned Krylov subspace (KSP) methods are widely used for solving large‐scale sparse linear systems arising from numerical solutions of partial differential equations (PDEs). These linear systems are often nonsymmetric due to the nature of the PDEs, boundary or jump conditions, or discretization methods. While implementations of preconditioned KSP methods are usually readily available, it is unclear to users which methods are the best for different classes of problems. In this work, we present a comparison of some KSP methods, including GMRES, TFQMR, BiCGSTAB, and QMRCGSTAB, coupled with three classes of preconditioners, namely, Gauss–Seidel, incomplete LU factorization (including ILUT, ILUTP, and multilevel ILU), and algebraic multigrid (including BoomerAMG and ML). Theoretically, we compare the mathematical formulations and operation counts of these methods. Empirically, we compare the convergence and serial performance for a range of benchmark problems from numerical PDEs in two and three dimensions with up to millions of unknowns and also assess the asymptotic complexity of the methods as the number of unknowns increases. Our results show that GMRES tends to deliver better performance when coupled with an effective multigrid preconditioner, but it is less competitive with an ineffective preconditioner due to restarts. BoomerAMG with a proper choice of coarsening and interpolation techniques typically converges faster than ML, but both may fail for ill‐conditioned or saddle‐point problems, whereas multilevel ILU tends to succeed. We also show that right preconditioning is more desirable. This study helps establish some practical guidelines for choosing preconditioned KSP methods and motivates the development of more effective preconditioners.

Ghai, Aditi↗

SNS: A Solution-Based Nonlinear Subspace Method for Time-Dependent Model Order Reduction

Several reduced order models have been successfully developed for nonlinear dynamical systems. To achieve a considerable speed-up, a hyper-reduction step is needed to reduce the computational complexity due to nonlinear terms. Many hyper-reduction techniques require the construction of nonlinear term basis, which introduces a computationally expensive offline phase. A novel way of constructing nonlinear term basis within the hyper-reduction process is introduced. In contrast to the traditional hyper-reduction techniques where the collection of nonlinear term snapshots is required, the SNS method avoids collecting the nonlinear term snapshots. Instead, it uses the solution snapshots that are used for building a solution basis, which enables avoiding an extra data compression of nonlinear term snapshots. As a result, the SNS method provides a more efficient offline strategy than the traditional model order reduction techniques, such as the DEIM, GNAT, and ST-GNAT methods. The SNS method is theoretically justified by the conforming subspace condition and the subspace inclusion relation. It is useful for model order reduction of large-scale nonlinear dynamical problems to reduce the offline cost. It is especially useful for ST-GNAT that has shown promising results, such as a good accuracy with a considerable online speed-up for hyperbolic problems in a recent paper by Choi and Carlberg [SIAM J. Sci. Comput., 41 (2019), pp. A26--A58], because ST-GNAT involves an expensive offline cost related to collecting nonlinear term snapshots. Error analysis for the SNS method is presented. Numerical results support that the accuracy of the solution from the SNS method is comparable to the traditional methods and a considerable speed-up (i.e., a factor of two to a hundred) is achieved in the offline phase.

97 MATHEMATICS AND COMPUTING↗

Fragment-based initialization for quantum subspace methods

Here, we present a novel quantum-classical algorithm called LAS-QKSD for multireference systems, by combining a classical localized active space (LAS) fragment-based multireference algorithm with the quantum Krylov subspace diagonalization (QKSD) method for quantum computers. The algorithm uses wave function information from a LAS self-consistent field (LASSCF) calculation to prepare an initial state with better overlap with the target ground state than the Hartree-Fock state. This is coupled with the use of QKSD to ultimately converge to the exact energy, providing faster convergence than starting from the Hartree-Fock state. Fragmentation has the two-fold benefit of fewer configurations on the classical side of the algorithm as well as fewer state preparation gates on the quantum side. First, we compare the LAS-QKSD method to the classical LASSCF method and to QKSD with a Hartree-Fock initial state. We then examine ways to load the LASSCF wave function using direct initialization and a QKSD-motivated spectral filtering approach. Finally, using a bimetallic complex, we show that the LAS-QKSD method is an efficient alternative to highly expensive complete active space SCF (CASSCF) calculations on strongly correlated systems.

D'Cunha, Ruhee↗

Active Subspace Methods for Data-Intensive Inverse Problems

The project has developed theory and computational tools to exploit active subspaces to reduce the dimension in statistical calibration problems. This dimension reduction enables MCMC methods to calibrate otherwise intractable models. The same theoretical and computational tools can also reduce the measurement dimension for calibration problems that use large stores of data.

97 MATHEMATICS AND COMPUTING↗

Two-Level Chebyshev Filter Based Complementary Subspace Method: Pushing the Envelope of Large-Scale Electronic Structure Calculations

We describe here a novel iterative strategy for Kohn–Sham density functional theory calculations aimed at large systems (>1,000 electrons), applicable to metals and insulators alike. In lieu of explicit diagonalization of the Kohn–Sham Hamiltonian on every self-consistent field (SCF) iteration, we employ a two-level Chebyshev polynomial filter based complementary subspace strategy to (1) compute a set of vectors that span the occupied subspace of the Hamiltonian; (2) reduce subspace diagonalization to just partially occupied states; and (3) obtain those states in an efficient, scalable manner via an inner Chebyshev filter iteration. By reducing the necessary computation to just partially occupied states and obtaining these through an inner Chebyshev iteration, our approach reduces the cost of large metallic calculations significantly, while eliminating subspace diagonalization for insulating systems altogether. We describe the implementation of the method within the framework of the discontinuous Galerkin (DG) electronic structure method and show that this results in a computational scheme that can effectively tackle bulk and nano systems containing tens of thousands of electrons, with chemical accuracy, within a few minutes or less of wall clock time per SCF iteration on large-scale computing platforms. We anticipate that our method will be instrumental in pushing the envelope of large-scale ab initio molecular dynamics. As a demonstration of this, we simulate a bulk silicon system containing 8,000 atoms at finite temperature, and obtain an average SCF step wall time of 51 s on 34,560 processors; thus allowing us to carry out 1.0 ps of ab initio molecular dynamics in approximately 28 h (of wall time).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bandgap optimization of two-dimensional photonic crystals using semidefinite programming and subspace methods

In this paper, we consider the optimal design of photonic crystal structures for two-dimensional square lattices. The mathematical formulation of the bandgap optimization problem leads to an infinite-dimensional Hermitian eigenvalue optimization problem parametrized by the dielectric material and the wave vector. To make the problem tractable, the original eigenvalue problem is discretized using the finite element method into a series of finite-dimensional eigenvalue problems for multiple values of the wave vector parameter. The resulting optimization problem is large-scale and non-convex, with low regularity and non-differentiable objective. By restricting to appropriate eigenspaces, we reduce the large-scale non-convex optimization problem via reparametrization to a sequence of small-scale convex semidefinite programs (SDPs) for which modern SDP solvers can be efficiently applied. Numerical results are presented for both transverse magnetic (TM) and transverse electric (TE) polarizations at several frequency bands. The optimized structures exhibit patterns which go far beyond typical physical intuition on periodic media design.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗