Search NASA⌕ Search

SEARCH · Search NASA

Results for “summer internship report”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Trigger-System Development for the HGCAL Cassette Testing (Final Report, Summer Internship 2023)

The Large Hadron Collider (LHC) will be upgraded to increase the instantaneous luminosity, which will result in an increase in the number of collisions from the 15 pile-up events of the first run of phase 1 to the 150-200 pile-up events of phase 2. Increasing the number of collisions means increasing the amount of radiation that the experiments will absorb. To meet these challenging conditions, the CMS calorimeters need to be upgraded. The new version of the hadronic HGCAL (High Granularity CALorimeters) in the endcaps will be assembled and tested in Fermilab’s laboratory. This report describes the new trigger system for testing the HGCAL’s cassettes.

42 ENGINEERING↗

DHS-STEM Summer Internship Report

Over the course of the last twelve weeks, I have been contributing to efforts in high efficiency solid state thermal neutron detection at Lawrence Livermore National Laboratory (LLNL) as a DHS HS-STEM intern. Reliable, high efficiency solid state thermal neutron detectors are desired to replace conventional 3 He gas filled tube technologies which have fieldability issues due to size, high operating voltage requirements, sensitivity to microphonics, and the recently rapidly diminishing supply of 3 He gas. Under the supervision of Rebecca Nikolić and Qinghui Shao, I have been developing an experimental plan to modify the doping profile of LLNL’s silicon-based pillar structured thermal neutron detector. The overall goal of this work is to reduce the capacitance and leakage current of the Pillar detector to enable the device area to be increased while maintaining a high thermal neutron detection efficiency.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Integrating PCTRAN with AI-Driven Host-Intrusion Detection and Secured Container Systems for Advanced Malware Analysis (Summer Internship Report)

This study presents a solution for enhancing the security of the Personal Computer Transient Analyzer (PCTRAN) PC-based Nuclear Power Plant Simulator by integrating the software with an artificial intelligence (AI)-driven host-intrusion detection system (HIDS), in addition to a secured container system, for malware analysis. PCTRAN is a Windows XP-based software package that has the ability to simulate a variety of accident and transient conditions for nuclear power plants (NPPs). It offers a high-resolution replica of the Nuclear Steam Supply System (NSSS) and displays the status of important parameters allowing for operator interaction. By including AI-driven HIDS for the NSSS, the framework can identify security threats in real-time, ensuring the integrity of the nuclear simulation environment. Additionally, the secured container system offers the ability to isolate and analyze malware, preventing potential threats from affecting core systems. The integration process involves extensive testing and validation in order to ensure accuracy, reliability, and compliance with security policies. This framework sets a new precedent for secure simulation and training in NPP operations, and offers insight for future advancements in cybersecurity.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Once-Through Steam Generator Model Analysis Using Python and Advanced Optimization Tools (Summer Internship Report)

This study focuses on the parametric analysis of design parameters for a once-through steam generator (OTSG) model, using python and advanced optimization tools to facilitate applications such as the flowing autoclave steam generator (FASG) test cases. Building on previous research involving another OTSG with a different design, this project aims to enhance our understanding of how steam generators (SGs) behave and how their outputs are influenced by changes in design. The reason for this design change is to allow for more precise modeling and optimization of SG performance, to provide a comparative analysis between the two designs, and to set up the model for integration with the FASG test case. The OTSG python-model is a mathematical representation (including fluid flow and heat transfer equations/models/correlations) of a steam-generating unit in a pressurized water reactor-type small modular reactor system. Design studies involve changing the model’s input design parameters to observe the resulting effects on the output of the system. By using advanced optimization tools, such as the Risk Analysis Virtual Environment (RAVEN) developed at Idaho National Laboratory, detailed design parametric studies and model optimization were performed. Six input parameters—pressure, temperature, and mass flow rate for the inlet of the primary-side (hot fluid) and secondary-side (cold fluid), respectively, of the SG—were randomly perturbed via RAVEN’s Monte Carlo Sampler module, using uniform distributions (i.e., ±1%, ±5% and ±10% relative changes) for 600 samples. The analysis provides valuable insights into SG optimization and can be used for sensor placement optimization to effectively monitor and obtain experimental data in other tests.

20 FOSSIL-FUELED POWER PLANTS↗

Summer Internship Report: ARA2 Benchmarking

Over the past decade, the RISC-V Instruction Set Architecture (ISA) has emerged as a significant player in both academic and industrial processor design due to its open-source nature, modular extension system, and versatility across domains ranging from microcontrollers to high-performance computing (HPC). One of its most important recent advancements is the RISC-V Vector Extension (RVV), which enables explicit data-level parallelism through vector registers and vectorized instructions. Unlike traditional SIMD (Single Instruction, Multiple Data) architectures that fix vector lengths at design time, RVV uses the concept of VLEN (vector register length) as a hardware-independent parameter and allows software to adapt dynamically to the available vector width. This flexible approach ensures portability across implementations while enabling scalable performance. The ARA2 core is a parameterizable RISC-V vector processor developed at the Integrated Systems Lab at ETH Zürich and the University of Bologna. Designed as a tightly-coupled accelerator to a scalar RISC-V core, ARA2 implements the RVV 1.0 specification and offers tunable architectural parameters such as the number of vector lanes, VLEN, and cache sizes.

97 MATHEMATICS AND COMPUTING↗

Summer 2021 Internship Report

During this internship program, I was assigned with developing a Web application to robustify web resources referenced by links (URI-Rs) in PDFs. It was intended for use in LANL Research 2 Library systems such as RASSTI (Review and Approval System for Scientific and Technical Information), where users submit scholarly PDFs that may contain URI-Rs. For such PDFs, the application should, using Web Archives, create robust snapshots (i.e., Mementos) of the web resources referenced by URI-Rs, and notify this robustification to LANL Research Library systems. The Mementos were to be created using the Robust Links Service, and the notifications were to be sent using the Linked Data Notifications (LDN) Protocol.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Summer 2021 Internship Report

The Library Research and Prototyping team (Proto Team) under the research library explores aspects of scholarly communication, covering aspects of infrastructure, interoperability, and persistence. One of the key contributions of the team is the contribution in standardizing and forming the infrastructure for Mementos in web archiving. The Memento framework in web archiving enables access to digital resources in prior versions serving both persistence and the interoperability of the information. During the internship program, I worked on improving the Memento infrastructure by updating the memento validator. The Memento validator provides the functionality of testing the compliance of the web resources to the Memento specification. The application is intended to be used by the community at large such as web archives, researchers, librarians, and general users, with different levels of technical expertise.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Source Discretization Near Curvilinear Mesh Refinements in One Dimeions (Summer Internship Final Report)

Lawrence Livermore National Lab developed the seismic wave code SW4 for earthquake simulations, and has recently added the ability to specify mesh-refinement interfaces in the curvilinear mesh. The primary purpose of this is to allow for high resolution near the surface, with relatively fewer total points in the mesh leading to shorter computation time. Presently, the code does not allow for point-source forcing terms (commonly used in seismic simulations) to be located near these curvilinear mesh refinement interfaces. The goal of this internship was to investigate the discretization of point-source forcing terms in the seismic wave equation when the sources are located near the interfaces between two curvilinear meshes. Ultimately this will be incorporated into SW4 to allow for more realistic simulations to be carried out in this faster implementation.

97 MATHEMATICS AND COMPUTING↗

Summer 2021 Internship Report

The internship was a 12 week program which started on 7th of June 2021. During this internship program, I worked as a Research Intern on a project which focused on feature extraction from scientific PDF documents using open-source, machine-learning-based tools.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

NASA-USRP Summer 2013 Internship Final Report

Three major projects were undertaken during the Summer 2013 USRP Internship: (A) assisting the cTAPS group with component and pressure vessel system analyses and documentation, (B) designing a hoisting fixture for a solid rocket motor, (C) finding an alternative to removing the DOT rated gaseous nitrogen tank from the roof for hydrostatic testing. Hypergolic Material Assessments (HMAs) and pressure calculations were performed on components of pressure systems. Additionally, component information was logged in the Standard Parts Database to provide a location where system designers can find information regarding components, including their specifications and compatibility with fluids. A hoisting fixture was designed to hoist a solid rocket motor and meets the specifications related to stress and size. However, there are issues with the fixtures bolt head allotment, the bolt spacing, and the complexity of the part. Finally, calculations were performed on an expiring DOT rated gaseous nitrogen tank in an attempt to re-rate it per ASME standards. This was unsuccessful so other options are being explored for the tank. While much progress was made on all three projects, there is still work to be performed on each project to achieve the desired results.

Gurganus, S. Christine↗

Fabrication and Design Testing of 4 Petals for Deployable Starshade Prototype : JPL Summer Internship Program : Final Report

One of the next steps in the exoplanet search is the development of occulter technology. Starlight suppression for a telescope would provide the ability to more accurately find and characterize potential true-Earth analogs. Coronagraphs have been the subject of much research in recent years but have yet to prove themselves a feasible approach. Attention has now turned to external occulters or starshades. A large occulting mask in front of a telescope should provide a comparable optical resolution to a coronagraph. Under a TDEM grant, a proposed starshade design was demonstrated to exceed coronagraph resolution by at least an order of magnitude. The current project is to demonstrate that the current design can be manufactured and then properly deployed. 4 sample starshade petals were constructed, ready to be attached to a pre-existing deployment truss. Time was spent detailing and modifying the petal construction process, so that future petals could be constructed at a more accurate and faster pace.

Starshade petals↗

Solving Coupled Surface and Subsurface Flow with Multirate Time Integration [Slides]

This report details an end of summer internship. The report lists the objective, "Add more multirate time integration methods to Amanzi" and concludes that, "Multirate methods can be used to speed up simulations and to get higher orders of accuracy", and "Coupled surface and subsurface simulations could benefit from using multirate schemes".

47 OTHER INSTRUMENTATION↗

DHS Internship Final Report

This summer I worked on projects that involved RNA sequencing of pathogens after an infection of host cells. The goal of these projects was to continue developing pathogen enrichment strategies for transcriptomic analysis, and also to perform hostpathogen interaction studies.

59 BASIC BIOLOGICAL SCIENCES↗

Internship Report - Andrew Beathard

This summer, I had the opportunity to work as an intern under Ryan Goldhahn at Lawrence Livermore National Laboratory. Alongside another intern, I was tasked with implementing perception and autonomy algorithms on unmanned aerial systems (UAS) for multiagent cooperative missions and testing their effectiveness at the OS-150 UAS test facility at LLNL. We aimed to engineer a collaborative reaction to a single agent’s identification of an object of interest and test various multiagent algorithms.

42 ENGINEERING↗

West Texas A&M University Pantex Internship Final Report: How to Apply RCM MENG-4097

This summer internship here at Pantex pertained to how one may approach equipment and apply Reliability Centered Maintenance. Reliability Centered Maintenance (RCM), is a strategy for maintenance first used in the 1960’s. Within this strategy there are three methods of maintenance, preventative, run-till-failure, and condition based and these will be what a part may be categorized into. When approaching equipment/parts to decide which category they fall into they must go under a five procedures, Criticality, Fault Tree Analysis, Task Analysis, Effectiveness, and Cost. The pilot project was to test the maintenance strategies on the preventative maintenance [PM’s] work orders used on Air Handling Units (AHU) and Dehumidifying Units (DHU) here at the Pantex Plant. This was accomplished by making recommendations on the preventative maintenance work orders.

99 GENERAL AND MISCELLANEOUS↗

Internship Work Report

I worked on two projects during my summer internship at Sandia. My official title was “Intern - Mission Tech Electrical Eng./Computer Eng.- R&D Undergraduate Summer.” I worked at the central location, which is Albuquerque, New Mexico. The department you are placed in at Sandia doesn’t always correspond to the people you will be working with. For example, I only directly worked with one person from my department this summer. On one of my projects, I worked with a diverse team of engineers from many different departments. On my other project, I mainly worked with two departments, as the project had two distinct parts. As mentioned earlier, I worked on two projects during my summer at Sandia. The first project focused on a lightweight embedded controller in an advanced FPGA System-on-Chip for radar signal processing applications. The term “controller” refers to a hardware device that directs the flow of data between two entities. An FPGA is a reprogrammable integrated circuit (as opposed to an integrated circuit with one purpose). An FPGA was used on this project so in order to protype various ideas for our System-on-Chip. My role on the project was to implement designs on the fabric of the FPGA and design a state machine (written in C) for the processor. My second project was also heavily involved with embedded systems but had a different application. It focused on using a Newton-Raphson control algorithm to stabilize an inverted pendulum using a novel microcontroller. The pendulum dynamics were derived, and it was successfully simulated in MATLAB. I worked on integrating the microcontroller with the inverted pendulum machinery, and converting the Newton-Raphson control algorithm from MATLAB into C. The inverted pendulum was successfully stabilized using a simple PID controller and industry-standard microcontroller. The project is still ongoing, and the team is gearing up for more tests using the novel Newton-Raphson control algorithm and novel microcontroller

42 ENGINEERING↗

Advanced Materials and Manufacturing Office (AMMTO) ORISE (Final Report)

For his AMMTO summer internship, Nathan Delaney was placed at Lawrence Livermore National Lab (LLNL). Throughout his time at LLNL, he worked on a bioreactor project focused on converting methane to value added liquid products, mainly organic acids. This project was different from anything he had worked on in the past and exposed him to new techniques. he also learned many new skills that he had not had exposure to. This is Nathan's final report outlining his experience as an intern for LLNL.

36 MATERIALS SCIENCE↗