Experimental investigation of thermal stratification development in boiling water reactor suppression pools during reactor core isolation cooling system operation
Not provided.
Nuclear Science & Technology↗
SEARCH · Search NASA
Results for “suppression pool”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Two-zone stratified wetwell model development and implementation for RELAP-7
The Reactor Core Isolation Cooling (RCIC) system consists of a turbine, pump and wetwell and is used in many US Boiling Water Reactors (BWRs) as an important heat removal system. The wetwell is a major heat sink within containment. Experimental investigations have shown that thermal stratification may occur in the wetwell during RCIC operation. Current systems-level analysis codes lack stratified wetwell models. Here, this paper describes the development of a stratified wetwell model for the RELAP-7 code. This paper uses a simple two-zone model for the wetwell water that can capture thermal stratification. This model assumes that a buoyant plume transports heat and mass from the steam injection site to the upper water zone. The buoyant plume assumption requires that steam is injected at a low enough rate so it adds negligible momentum. Model validation against experimental data shows similar trends of temperature field development in the suppression pool.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
Understanding the dynamic nature of plant lipid anabolic and catabolic metabolism is key to sustainable oilseed engineering
Plant-derived oils are essential sources of reduced carbon and various fatty acid (FA) structures for food, biofuels, and the oleochemical industry. Despite extensive efforts, engineering mainstream oilseed crops to produce high levels of industrially valuable unusual FAs (UFAs) remains challenging. This review synthesizes recent advances in the understanding of lipid metabolic networks, emphasizing how species-specific regulation of FA synthesis, activation, and delivery influences triacylglycerol (TAG) assembly to govern the efficiency of UFA accumulation. Key insights reveal that acyl flux through anabolic and catabolic branches of lipid metabolism is tightly controlled by enzyme substrate selectivities, diacylglycerol (DAG) pool compartmentalization, and metabolic context, including lipid remodeling and degradation pathways. Engineering success is often constrained by incompatibilities between UFA biosynthetic enzymes and endogenous host metabolism, leading to flux imbalances, futile cycles, and undesired phenotypes. We highlight emerging strategies to overcome these barriers, such as the use of UFA-selective acyltransferases, coordinated manipulation of DAG source pools, suppression of competing endogenous enzymes, and exploitation of TAG remodeling mechanisms. This integrated synthesis provides a conceptual framework for logic-based engineering of oilseeds with enhanced UFA content by offering new avenues for sustainable biomanufacturing of valuable lipids.
acyltransferase specificity↗
Molten pool dynamics and humping suppression in high-speed laser welding via tailored beam configurations
High-speed laser welding is essential for increasing the production rate of fuel cell fabrication. However, when the welding speed exceeds a critical limit, humping occurs and reduces the weld quality. In this study, two tailored beam configurations, including an adjustable ring mode and a dual-beam configuration, were employed to suppress humping. Computational fluid dynamics simulations were performed to elucidate the underlying suppression mechanisms. Here, the results show that, in the adjustable ring mode, humping mitigation arises from a reduced backward cross-sectional melt flow rate and a more stable molten pool. In the dual-beam configuration, humping suppression is attributed to the deceleration of melt flow, the conduction-mode behavior of the trailing beam, and the widening of the molten pool induced by the trailing laser. Furthermore, because the dual-beam configuration directly modifies the trailing molten pool dynamics, it achieves more effective humping suppression, extending the welding speed limit to 1.50 m/s, compared with 1.00 m/s for the adjustable ring mode.
08 HYDROGEN↗
Factors Controlling Precipitation Onset and Maintenance: Inferences From Large Eddy Simulations of Two Afternoon Deep Convective Regimes Over Amazon
To investigate the environmental factors controlling the onset and maintenance of afternoon precipitation over tropical rainforests, two contrasting cases are created for large eddy simulations (LES) using GoAmazon observations: one features a single-pulse rain dissipating quickly in earlier afternoon, while the other shows double pulses lasting until evening. For these two specific cases under consideration, LES confirms that early-morning relative humidity dominates afternoon rain patterns. The attributed impacts are distinct: moisture determines the rain onset timing while temperature affects the peak rain intensity. Single-pulse day observes one round of strong precipitation and cold pools, which further suppresses convection. On double-pulse day, the first precipitation peak results from an intermediate development of congestus clouds, whose detrainment leads to a gradual moistening of the lower-to-middle troposphere. This behavior of convection favors a second pulse of stronger precipitation with more convective organization, whose development decouples from surface fluxes and sustains until evening.
Amazon↗
Preliminary Design of Critical Experiments Involving Commercially Available B 4 C Neutron Absorber Plates with Low-Enriched UO 2 Fuel
The International Criticality Safety Benchmark Evaluation Project (ICSBEP) is an initiative to provide high-quality benchmark data in a standardized format for criticality safety analysts to use to validate calculational tools and nuclear data. In the last released 2022 version, the ICSBEP handbook contains over 5,000 critical experiment descriptions, results, and associated models. This paper describes the critical configurations proposed and calculations performed as part of the conceptual design phase of Integral Experiment Request (IER) 554 (IER-554). The goal of IER-554 is to add to the benchmark experiments available to the criticality safety community by designing critical experiments that can analyze how adding commercially available Boralcan plates to an assembly of low-enriched UO2 fuel rods affects the effective neutron multiplication factor (k eff ). Boralcan, a neutron absorber product developed by Rio Tinto, is made of B4C in an Al 1100 matrix and is commonly used for criticality suppression in fuel storage pools. In the current version of the ICSBEP handbook, only a few dated critical experiments involve B4C materials, and none involve Boralcan in a thin plate shape. The experiments designed as part of IER-554 are intended to be performed at the Sandia Pulsed Reactor Facility/Critical Experiments (SPRF/CX) apparatus at Sandia National Laboratories. SPRF/CX is a well-characterized assembly considered trustworthy by the benchmarking community because of the numerous high-quality evaluations with very low experimental uncertainties included in the ICSBEP handbook. Figure 1 illustrates the assembly for a particular configuration from LCT-078, one of the published benchmarks in the ICSBEP handbook. The experiments will be moderated and reflected by light water at ambient atmospheric pressure. Before the plates are inserted in the critical assembly, they will be characterized with x-ray computed tomography (XCT) to identify the sizes and distribution of the B 4 C powder particles inside the plates. The preliminary design calculations were performed with SCALE 6.3.0 using the KENO V.a sequence for the criticality calculations, the CE-TSUNAMI-3D sequence for the sensitivity and uncertainty studies, and the ENDF/B-VII.1 Continuous Energy cross section library. All the calculation results presented have 10 pcm statistical uncertainties. A set of critical experiments with Boralcan plates could increase the confidence of the criticality safety community in its modeling methods when using this type of neutron absorber material. Experiments would also help validate k eff calculations, and the industry could use these validations to change the B loading credit limits from the US Nuclear Regulatory Commission standard review plan for dry cask storage of spent nuclear fuel. This paper summarizes only part of the analysis documented in the preliminary design report.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
High-fidelity pool boiling simulations on multiple nucleation sites using interface capturing method
Boiling has proved to be one of the most efficient means for heat transfer and is a very important phenomenon during severe accident scenarios in light water reactors. High-fidelity pool boiling simulations can provide a numerical database for improving mechanistic boiling models by allowing for specific evaluation of interactions among bubbles. Previously published pool boiling simulations investigated two nucleation sites in which bubble growth at one site suppressed nucleation at the other site. Based on previous study results, more complicated interface-capturing simulations on pool boiling were conducted using PHASTA code with locally refined unstructured mesh. First, different boundary conditions (BCs) were assessed to support robustness and reproducibility of the boiling model. Then, a scale study was conducted at a larger domain with nine nucleation sites where either nine or four nucleation sites are activated. Involving more nucleation sites increased the complexity of bubble interactions from surrounding sites. Finally, bubble departure behavior influenced by wall heat flux was investigated. In this work, when heat flux was increased, the order of bubble departure changed, but diagonal bubbles always departed after one another. The departure time interval between the first and second bubble reduced as heat flux increased. The corresponding frequency was almost linearly proportional to the heat flux. In addition, bubble departure behavior was found to be greatly influenced by the nucleation site pattern. Multiple nucleation sites resulted in superimposed inhibitive effects from surrounding sites to each bubble, which extensively delayed the departure. This new observation was not discussed in previously published works. The work presented here provides new insight on the fundamental understanding of boiling phenomena, contributes to the development of a 3D multiphase computational fluid dynamics (M-CFD) model, and provides a more comprehensive database for data-driven pool boiling studies.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
Interface Capturing Simulations on Pool Boiling Performance With Multiple Nucleation Sites
High-fidelity pool boiling simulations can provide a numerical database for improving mechanistic boiling models by allowing for specific evaluation of interactions among bubbles. Previously published pool boiling simulations investigated two nucleation sites in which bubble growth at one site suppressed nucleation at the other site. Based on previous study results, more complicated interface-capturing simulations on pool boiling were conducted using PHASTA code with locally refined unstructured mesh.First, different boundary conditions (BCs) were assessed to support robustness and reproducibility of the boiling model. Then, a scale study was conducted at a larger domain with nine nucleation sites, four of which were activated. Involving more nucleation sites increased the complexity of bubble interactions from surrounding sites. Finally, bubble departure behavior influenced by wall heat flux was investigated. When heat flux was increased, the order of bubble departure changed, but diagonal bubbles always departed after one another. The departure time interval between the first and second bubble reduced as heat flux increased. The corresponding frequency was almost linearly proportional to the heat flux. In addition, bubble departure behavior was found to be greatly influenced by the nucleation site pattern. Multiple nucleation sites resulted in superimposed inhibitive effects from surrounding sites to each bubble, which extensively delayed the departure.The work presented here provides new insight on the fundamental understanding of boiling phenomena, contributes to the development of a 3D multiphase computational fluid dynamics (M-CFD) model, and provides a more comprehensive database for data-driven pool boiling studies.
Fan, Joy↗
The Essential Role of Westerly Wind Bursts in ENSO Dynamics and Extreme Events Quantified in Model “Wind Stress Shaving” Experiments
Abstract Westerly wind bursts (WWBs)—brief but strong westerly wind anomalies in the equatorial Pacific—are believed to play an important role in El Niño–Southern Oscillation (ENSO) dynamics, but quantifying their effects is challenging. Here, we investigate the cumulative effects of WWBs on ENSO characteristics, including the occurrence of extreme El Niño events, via modified coupled model experiments within Community Earth System Model (CESM1) in which we progressively reduce the impacts of wind stress anomalies associated with model-generated WWBs. In these “wind stress shaving” experiments we limit momentum transfer from the atmosphere to the ocean above a preset threshold, thus “shaving off” wind bursts. To reduce the tropical Pacific mean state drift, both westerly and easterly wind bursts are removed, although the changes are dominated by WWB reduction. As we impose progressively stronger thresholds, both ENSO amplitude and the frequency of extreme El Niño decrease, and ENSO becomes less asymmetric. The warming center of El Niño shifts westward, indicating less frequent and weaker eastern Pacific (EP) El Niño events. Removing most wind burst–related wind stress anomalies reduces ENSO mean amplitude by 22%. The essential role of WWBs in the development of extreme El Niño events is highlighted by the suppressed eastward migration of the western Pacific warm pool and hence a weaker Bjerknes feedback under wind shaving. Overall, our results reaffirm the importance of WWBs in shaping the characteristics of ENSO and its extreme events and imply that WWB changes with global warming could influence future ENSO.
Meteorology & Atmospheric Sciences↗
Intra‐ and inter‐annual variability of nitrification in the rhizosphere of field‐grown bioenergy sorghum
Abstract Biological nitrification inhibition (BNI) and plant–microbe competition for ammonium (NH 4 + ) by sorghum ( Sorghum bicolor (L.) Moench) have the potential to suppress nitrification, reducing nitrate (NO 3 − ) and nitrous oxide (N 2 O) production for more sustainable bioenergy feedstock production. However, it is unknown how variability in environmental factors, field management, and plant growth affect the suppression of nitrification. We conducted a field trial with four genotypes of energy sorghum and four fertilization rates in central Illinois, USA, and measured soil N pools, potential nitrification and denitrification rates, and microbial community composition in bulk and rhizosphere soils to assess nitrification suppression throughout the 2018 and 2019 growing seasons. Concentrations of NO 3 − and NH 4 + were very low in rhizosphere soil regardless of fertilization level, suggesting strong N demand by plants and microbes. Potential nitrification was lower in the rhizosphere soil than bulk soil, and this suppression was strongest mid‐season ~2 months after planting in both years (20% suppression in 2018 and 58% in 2019). Since precipitation was lower during the mid‐growing season of 2019 compared to 2018, we speculate that hydrophilic BNI root exudates accumulated in the rhizosphere and suppressed nitrification more than in 2018 when soil moisture was higher. Unfertilized plots had greater nitrification suppression than fertilized plots during the mid‐season in 2018, but otherwise nitrification suppression was insensitive to fertilizer treatment. Potential denitrification was stimulated in the rhizosphere compared to bulk soil in both study years, suggesting that heterotrophic activity was stimulated by plant carbon inputs, possibly further suppressing slower‐growing chemoautotrophic nitrifying microbes. Overall, we found inter‐ and intra‐annual variation in nitrification suppression in the rhizosphere of field‐grown biomass sorghum, suggesting that plant phenology and environmental conditions should be considered when devising strategies to improve the nitrogen sustainability of this annual bioenergy crop.
09 BIOMASS FUELS↗
Re-Programing Glucose Catabolism in the Microalga Chlorella sorokiniana under Light Condition
The microalga Chlorella sorokiniana has attracted much attention for lipid production and wastewater treatment. It can perform photosynthesis and organic carbon utilization concurrently. To understand its phototrophic metabolism, a biomass compositional analysis, a 13 C metabolic flux analysis, and metabolite pool size analyses were performed. Under dark condition, the oxidative pentose phosphate pathway (OPP) was the major route for glucose catabolism (88% carbon flux) and a cyclic OPP–glycolytic route for glucose catabolism was formed. Under light condition, fluxes in the glucose catabolism, tricarboxylic acid (TCA) cycle, and anaplerotic reaction (CO 2 fixation via phosphoenolpyruvate carboxylase) were all suppressed. Meanwhile, the RuBisCO reaction became active and the ratio of its carbon fixation to glucose carbon utilization was determined as 7:100. Moreover, light condition significantly reduced the pool sizes of sugar phosphate metabolites (such as E4P, F6P, and S7P) and promoted biomass synthesis (which reached 0.155 h –1 ). In addition, light condition increased glucose consumption rates, leading to higher ATP and NADPH production and a higher protein content (43% vs. 30%) in the biomass during the exponential growth phase.
13C-MFA↗
Sensitivity of pore collapse heating to the melting temperature and shear viscosity of HMX
A multiscale modeling strategy is used to quantify factors governing the temperature rise in hot spots formed by pore collapse from supported and unsupported shock waves in the high explosive HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine). Two physical aspects are examined in detail, namely the melting temperature and liquid shear viscosity. All-atom molecular dynamics simulations of phase coexistence are used to predict the pressure-dependent melting temperature up to 5 GPa. Equilibrium simulations and the Green–Kubo formalism are used to obtain the temperature- and pressure-dependent liquid shear viscosity. Starting from a simplified continuum-based grain-scale model of HMX, in this study we systematically increase the complexity of treatments for the solid–liquid phase transition and liquid shear viscosity in simulations of pore collapse. Using a realistic pressure-dependent melting temperature completely suppresses melting for supported shocks, which is otherwise predicted when treating it as a constant determined at atmospheric pressure. Alternatively, melt pools form around collapsed pores when the pressure (and melting temperature) are reduced during the release stage of unsupported shocks. Capturing the pressure dependence of the shear viscosity increases the peak temperature of melt pools by hundreds of Kelvin through viscous work. The complicated interplay of the solid-phase plastic work, solid–liquid phase transition, and liquid-phase viscous work identified here motivate taking a systematic approach to building increasingly complex grain-scale models.
36 MATERIALS SCIENCE↗
Plant-Nitrifier Interactions in Topsoil and Subsoil
Plants can influence soil microbes through resource acquisition and interference competition, with consequences for ecosystem function such as nitrification. However, how plants alter soil conditions to influence nitrifiers and nitrification rates remains poorly understood, especially in the subsoil. Here, coupling the 15N isotopic pool dilution technique, high throughput sequencing and in situ soil O2 monitoring, we investigated how a deep-rooted perennial grass, miscanthus, versus an adjacent shallow-rooted turfgrass reference shapes nitrifier assembly and function along 1 m soil profiles. In topsoil, the suppression of ammonia (NH3) oxidizing archaea (AOA) and gross nitrification rates in miscanthus relative to the reference likely resulted from nitrifiers being outcompeted by plant roots and heterotrophic bacteria for ammonium (NH4+). The stronger tripartite competition under miscanthus may have been caused in part by the lower soil organic matter (SOM) content, which supported lower gross nitrogen (N) mineralization, the major soil process that produces NH4+. In contrast, below 10 cm soil depth, significantly greater gross nitrification rates were observed in miscanthus compared to the reference. This was likely driven by the significantly lower oxygen (O2) in miscanthus than reference subsoil, which selected against aerobic heterotrophic bacteria but in favor of AOA. Overall, we found that plants can regulate AOA community structure and function through different mechanisms in topsoil and subsoil, with suppression of nitrification in topsoil and enhancement of nitrification in subsoil.
Field Data↗
An operando synchrotron study on the effect of wire melting state on solidification microstructures of Inconel 718 in wire-laser directed energy deposition
Directed energy deposition (DED) with a coaxial wire-laser configuration has gained significant attention in recent years for the production of large-scale metallic components because of its low directional dependence, fast deposition rate, high feedstock efficiency, and low manufacturing costs. This work studies the coaxial wire-laser DED process of Inconel 718 alloy under a stable deposition condition with a relatively low input volumetric energy density (55.5J/mm 3 ). Post characterization reveals a cluster of refined grains at the center-bottom region of the as-printed track. Operando high-energy synchrotron X-ray experiments and multi-physics modeling are applied innovatively to study the fundamental mechanism responsible for the formation of this microstructure. The X-ray diffraction experiment provides direct evidence, which is supported by the simulation, that the feeding wire can reach the melt pool bottom and release solid particles (primarily carbides) near the mushy zone owing to insufficient melting. Consequently, these sub-micron sized particles suppress the growth of large columnar grains and cause the formation of unique microstructural heterogeneity. In conclusion, this discovery offers new opportunities for tailoring the solidification microstructure by controlling the melting state of the feedstock wire in DED process, in addition to commonly known factors such as the thermal gradient and solidification velocity.
42 ENGINEERING↗
Lead-Free Organic–Perovskite Hybrid Quantum Wells for Highly Stable Light-Emitting Diodes
Two-dimensional perovskites that could be regarded as natural organic-inorganic hybrid quantum wells (HQWs) are promising for light-emitting diode (LED) applications. High photoluminescence quantum efficiencies (approaching 80%) and extremely narrow emission bandwidth (less than 20 nm) have been demonstrated in their single crystals; however, a reliable electrically driven LED device has not been realized owing to inefficient charge injection and extremely poor stability. Furthermore, the use of toxic lead raises concerns. Here, we report Sn(II)-based organic-perovskite HQWs employing molecularly tailored organic semiconducting barrier layers for efficient and stable LEDs. Utilizing femtosecond transient absorption spectroscopy, we demonstrate the energy transfer from organic barrier to inorganic perovskite emitter occurs faster than the intramolecular charge transfer in the organic layer. Consequently, this process allows efficient conversion of lower-energy emission associated with the organic layer into higher-energy emission from the perovskite layer. Thus, this greatly broadened the candidate pool for the organic layer. Incorporating a bulky small bandgap organic barrier in the HQW, charge transport is enhanced and ion migration is greatly suppressed. We demonstrate a HQW-LED device with pure red emission, a maximum luminance of 3466 cd m -2 , a peak external quantum efficiency up to 3.33%, and an operational stability of over 150 h, which are significantly better than previously reported lead-free perovskite LEDs.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Highly Altered State of Proton Transport in Acid Pools in Charged Reverse Micelles
Transport mechanisms of solvated protons of 1 M HCl acid pools, confined within reverse micelles (RMs) containing the negatively charged surfactant sodium bis(2-ethylhexyl) sulfosuccinate (NaAOT) or the positively charged cetyltrimethylammonium bromide (CTABr), are analyzed with reactive force field simulations to interpret dynamical signatures from TeraHertz absorption and dielectric relaxation spectroscopy. We find that the forward proton hopping events for NaAOT are further suppressed compared to a nonionic RM, while the Grotthuss mechanism ceases altogether for CTABr. We attribute the sluggish proton dynamics for both charged RMs as due to headgroup and counterion charges that expel hydronium and chloride ions from the interface and into the bulk interior, thereby increasing the pH of the acid pools relative to the nonionic RM. For charged NaAOT and CTABr RMs, the localization of hydronium near a counterion or conjugate base reduces the Eigen and Zundel configurations that enable forward hopping. Thus, localized oscillatory hopping dominates, an effect that is most extreme for CTABr in which the proton residence time increases dramatically such that even oscillatory hopping is slow.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Reduced Atmospheres of Post-impact Worlds: The Early Earth
Impacts may have had a significant effect on the atmospheric chemistry of the early Earth. Reduced phases in the impactor (e.g., metallic iron) can reduce the planet's H 2 O inventory to produce massive atmospheres rich in H 2 . While previous studies have focused on the interactions between the impactor and atmosphere in such scenarios, we investigate two further effects: (1) the distribution of the impactor's iron inventory during impact between the target interior, target atmosphere, and escaping the target; and (2) interactions between the post-impact atmosphere and the impact-generated melt phase. We find that these two effects can potentially counterbalance each other, with the melt–atmosphere interactions acting to restore reducing power to the atmosphere that was initially accreted by the melt phase. For a ~10 22 kg impactor, when the iron accreted by the melt phase is fully available to reduce this melt, we find an equilibrium atmosphere with H 2 column density ~10 4 moles cm –2 (pH 2 ~ 120 bars, X H2 ~ 0.77), consistent with previous estimates. However, when the iron is not available to reduce the melt (e.g., sinking out in large diameter blobs), we find significantly less H 2 (7 × 10 2 – 5 × 10 3 moles cm –2 , pH 2 ≲ 60 bars, X H2 ≲ 0.41). These lower H 2 abundances are sufficiently high that species important to prebiotic chemistry can form (e.g., NH 3 , HCN), but sufficiently low that the greenhouse heating effects associated with highly reducing atmospheres, which are problematic to such chemistry, are suppressed. The manner in which iron is accreted by the impact-generated melt phase is critical in determining the reducing power of the atmosphere and resolidified melt pool in the aftermath of impact.
79 ASTRONOMY AND ASTROPHYSICS↗
Forest Breeze–Cold Pool Interactions Drive Convective Organization over Heterogeneous Vegetation
Heterogeneous landscapes can influence the development of convection through the generation of thermally driven mesoscale circulations. To assess the impacts of these circulations and their interaction with sea breezes, we simulated convection in an idealized coastal environment using the Regional Atmospheric Modeling System (RAMS). We compared simulations with striped patterns of surface vegetation to those of uniform vegetation to identify the importance of vegetation heterogeneity in impacting convective development. Under dry soil conditions representative of those during the Tracking Aerosol Convection Interactions Experiment (TRACER) and Experiment of Sea Breeze Convection, Aerosols, Precipitation, and Environment (ESCAPE) campaigns in June 2022, we found that these vegetation-induced circulations, referred to in the literature as “forest breezes,” are more important than the sea breeze in determining the location of convection initiation. Convection and precipitation are also found to be favored over forests and suppressed over pasture and suburban landscapes as a result of greater surface sensible heat flux over the forest. Our findings also indicate that forest breezes are important for initiating convection along the boundaries of the forest, but that cold pools may play a key role in propagating the forest breezes toward the center of the forest stripe. In our simulations, the collisions of these breezes in the center of the forest stripe lead to uplift and strong convection there; however, a different width of the forest stripe would alter when the forest breezes collide or whether they collide at all. The presence of these cold pools may therefore impact the “ideal stripe width,” the width of each vegetation stripe which maximizes domain-wide precipitation.
54 ENVIRONMENTAL SCIENCES↗