Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface contamination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A Monte Carlo study of reflection electron energy loss spectroscopy spectrum of a carbon contaminated surface

It has been experimentally found that the carbon surface contamination influences strongly the spectrum signals in reflection electron energy loss spectroscopy (REELS) especially at low primary electron energy. However, there is still little theoretical work dealing with the carbon contamination effect in REELS. Such a work is required to predict REELS spectrum for layered structural sample, providing an understanding of the experimental phenomena observed. In this study, we present a numerical calculation result on the spatially varying differential inelastic mean free path for a sample made of a carbon contamination layer of varied thickness on a SrTiO{sub 3} substrate. A Monte Carlo simulation model for electron interaction with a layered structural sample is built by combining this inelastic scattering cross-section with the Mott's cross-section for electron elastic scattering. The simulation results have clearly shown that the contribution of the electron energy loss from carbon surface contamination increases with decreasing primary energy due to increased individual scattering processes along trajectory parts carbon contamination layer. Comparison of the simulated spectra for different thicknesses of the carbon contamination layer and for different primary electron energies with experimental spectra clearly identifies that the carbon contamination in the measured sample was in the form of discontinuous islands other than the uniform film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Decontamination of urban surfaces contaminated with radioactive materials and consequent onsite recycling of the waste water

Enhancing rapid remediation strategies is paramount for recovery after a large-scale nuclear contamination event in an urban environment. Some current strategies recommend use of readily available equipment, materials, and facilities to expedite recovery. For example, applying pressurized water to contaminated surfaces may effectively remove radioactive contamination. In this study, a commercial power washer removes soluble forms of 152 Eu 3 + , 85 Sr 2 + , and 137 Cs + contamination from common porous building materials, and computer simulations characterize the recycling of the resultant contaminated wash water. Pressure washing the porous building materials under spray conditions typical with do-it-yourself units improved decontamination factors (DFs) for 152 Eu compared to low-pressure application of tap water (majority of two-tailed t-test p-values < 0.1), but pressure did not improve DFs for 137 Cs or 85 Sr. For both pressurized and low-pressure applications, adding potassium ions (K + ) to promote ion exchange reactions produced significantly higher DFs for tested radionuclides on asphalt, brick, and concrete. The resultant contaminated wash water can be processed through self-prepared chemical filtration beds of clay and sand. Modeled in a prior study, the beds yielded linear trends (R 2 > 0.98) in sensitivity analyses between most bed configuration variables and bed performance variables, permitting flexible ad-hoc bed design. The experimental and simulation results led to estimates of the remediation rate and waste generated after cleaning 250 m 2 of cesium-contaminated concrete from the combined deployment of a power washer and two different mobile treatment beds. Furthermore, the first treatment bed was designed to reduce treatment time and processed 1900 L of wash solution in 70 min using 880 kg of clay/sand infill material. Designed to reduce the solid waste generated, the second bed processed the same solution volume in 1040 min (17 h) using 170 kg of clay/sand infill material. The results of this analysis warrant further investigation of power washing with recycled salt solution as an effective rapid decontamination method with manageable waste.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Remotely sensed physical property estimation from powder contaminated surfaces

It is the intent of this paper to demonstrate the veracity of a method to estimate the total solid contaminant mass present on a sparsely coated surface encompassing a pixel from longwave infrared spectra. Sparsely coated surfaces create complex radiometry due to the interactions of electromagnetic energy between intimate materials. Current algorithms can be used on intimate mixtures to identify the abundances of materials in a pixel, but they cannot provide additional property information. Radiative transfer models can create mixture signatures, but only with a set of well-characterized physical parameters that are typically not known or are difficult to retrieve. Finally, the approach described here creates a parameter inversion model from a radiative transfer model and uses empirically measured mixture data to retrieve physical characteristics of the contaminated surface and derive a total contaminant mass present.

97 MATHEMATICS AND COMPUTING↗

Influence of surface contamination on the wettability of heat transfer surfaces

In this study, the wettability of heat transfer surfaces plays an important role in liquid–vapor phase change phenomena, including boiling incipience, the critical heat flux, the Leidenfrost transition, and condensation. The influence of adsorbed surface contamination at the nanoscale, though seldom considered, can have a profound impact on wetting behavior. This study quantitatively investigates the impact of contaminant layer thickness on wettability. Various cleaning treatments are explored on zirconium and 6061 aluminum to determine the effect on contaminant and oxide layer thickness. Angle-resolved X-ray photoelectron spectroscopy can be used to measure the thickness of oxide and contaminant layers, which is then correlated to wettability by measuring the equilibrium contact angle. Results indicate that even after solvent cleaning, the contact angle of water on practical heat transfer surfaces is dominated by a hydrocarbon contaminant overlayer around five nanometers thick.

36 MATERIALS SCIENCE↗

Composition suitable for decontaminating a porous surface contaminated with cesium

A method of decontaminating porous surfaces contaminated with water soluble radionuclides by contacting the contaminated porous surfaces with an ionic solution capable of solubilizing radionuclides present in the porous surfaces followed by contacting the solubilized radionuclides with a gel containing a radionuclide chelator to bind the radionuclides to the gel, and physically removing the gel from the porous surfaces. A dry mix is also disclosed of a cross-linked ionic polymer salt, a linear ionic polymer salt, a radionuclide chelator, and a gel formation controller present in the range of from 0% to about 40% by weight of the dry mix, wherein the ionic polymer salts are granular and the non cross-linked ionic polymer salt is present as a minor constituent.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Estimating Radionuclide Activity in Surface Contamination for GTCC Activated Metal Waste Streams - 18236

The U.S. Nuclear Regulatory Commission's licensing requirements for land disposal of low-level radioactive waste (LLRW) in 10 CFR Part 61 classify LLRW wastes as Class A, B, C, or Greater-Than- Class C (GTCC). GTCC waste includes activated metals that are generated primarily by nuclear power reactors. Activated metals represent a significant volume (880 cubic meters) of GTCC wastes that may be generated as current commercial power reactors are decommissioned. Additionally, these wastes are expected to contain radionuclides that are very long-lived and are mobile in the environment (e.g., Tc-99 and I-129) as well as transuranic radionuclides that, while not as mobile as other radionuclides, have greater potential for health consequences should such radionuclides reach receptor locations in sufficient concentrations. Quantities of surface contamination on activated metals have typically been reported using a combination of assumptions, calculations, and measurements. For example, projections of future activity associated with surface contamination, or the surface activity, for the activated metals is dependent on assumptions made regarding fuel behavior (e.g., modern fuel performance is expected to be different from fuel performance in the 1970's). In this study, we examined published information to better understand how assumptions, calculations, and measurements used for estimating quantities of surface contamination on activated metals can influence the estimated quantities. The analysis in this report was performed to better understand how estimates for the activated metal inventory of GTCC metal could influence potential decisions regarding the siting and design of disposal facilities. It was found that the variability in surface contamination either measured or estimated was sufficiently large that characterization of the radionuclide inventory for GTCC activated metals, especially the transuranic radionuclides, is critically important for establishing the siting and design requirements for a disposal facility. Overly conservative assumptions for the inventory could significantly limit disposal options, whereas, overly optimistic assumptions with respect to the inventory could lead to a disposal facility that may not protect off-site receptors. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

In situ plasma removal of surface contaminants from ion trap electrodes

In this thesis, the construction and implementation of an in situ plasma discharge designed to remove surface contaminants from electrodes in an ion trapping experimental system is presented with results. In recent years, many advances have been made in using ion traps for quantum information processing. All of the criteria defined by DiVincenzo for using ion traps for implementing a quantum computer have been individually demonstrated, and in particular surface traps provide a scalable platform for ions. In order to be used for quantum algorithms, trapped ions need to be cooled to their motional (quantum mechanical) ground state. One of the hurdles in integrating surface ion traps for a quantum computer is minimizing electric field noise, which causes the ion to heat out of its motional ground state and which increases with smaller ion-to-electrode distances realized with surface traps. Surface contamination of trap electrodes is speculated to be the primary source of electric field noise. The main goal achieved by this work was to implement an in situ surface cleaning solution for surface electrode ion traps, which would not modify the ion trap electrode surface metal. Care was taken in applying the RF power in order to localize a plasma near the trap electrodes. A method for characterizing the energy of the plasma ions arriving at the ion trap surface is presented and results for plasma ion energies are shown. Finally, a method for quantifying the effectiveness of plasma cleaning of trap electrodes, using the surface analysis technique of X-ray photoelectron spectroscopy for measuring the amount and kind of surface contaminants, is described. A significant advantage of the trap electrode surface cleaning method presented here is the minimal changes necessary for implementation on a working ion trap experimental system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A method for Removing Surface Contamination on Ultra-pure Copper Spectrometer Components

Spectrometers for the lowest-level radiometric measurements require materials of extreme radiopurity. Measurements of rare nuclear decays, e.g. neutrinoless double-beta decay, can require construction and shielding materials with bulk radiopurity reaching one micro-Becquerel per kilogram or less. When such extreme material purity is achieved, surface contamination, particularly solid daughters in the natural radon decay chains, can become the limiting background. High-purity copper is an important material for ultra-low-background spectrometers and thus is the focus of this work. A method for removing surface contamination at very low levels without attacking the bulk material is described. An assay method using a low-background proportional counter made of the material under examination is employed, and the resulting preliminary result of achievable surface contamination levels is presented.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Radon induced surface contaminations in low background experiments

In neutrinoless double-beta decay and dark matter searches, one of the main issues is to increase the experimental sensitivity through careful material selection and production, minimizing the background contributions. In order to achieve the required, extremely low, counting rates, very stringent requirements must be fulfilled in terms of bulk material radiopurity. As the experimental sensitivity increases, the bulk impurities in the detector components decrease, and surface contaminations start to play an increasingly significant role In fully active detectors, like cryogenic particle detectors, surface contaminations are a critical issue (as shown by the CUORICINO experiment). {sup 222}Rn is by far the most intense source of airborne radioactivity, and if a radio-pure material is exposed to environment where the Radon concentration is not minimized, {sup 210}Pb and {sup 210}Po contaminations can occur. The mechanisms and the dynamics of Radon-induced surface contaminations are reviewed, and specific solutions to prevent and to reject the induced background are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Performance enhancement of medium temperature baked niobium SRF cavity by surface contamination removal

Medium temperature baking (300- 350 °C) enhances the quality factor of niobium superconducting radio frequency cavities. However, surface contamination introduced during vacuum furnace baking limits the quench field and may also degrade the quality factor of the cavity. To investigate this effect, a 1.3 GHz single-cell Nb cavity underwent mid-T baking, followed by a chemical treatment to remove the surface contaminants. Post-treatment measurements revealed a significant improvement in both the quality factor and the quench field.

Chouhan, Vijay [Fermilab] (ORCID:0000000282004931)↗

Performance Enhancement of Medium Temperature Baked Nb SRF Cavity by Surface Contamination Removal

Medium-temperature (mid-T) baking, typically conducted at 300 350 C, enhances the quality factor of niobium (Nb) superconducting radio frequency cavities. However, surface contamination introduced during vacuum furnace baking can limit the cavity performance. To investigate this effect, a 1.3 GHz single-cell Nb cavity underwent mid-T baking, followed by a chemical treatment to remove the surface contaminants. Post-treatment measurements revealed a significant improvement in both the quality factor and the quench field.

Chouhan, Vijay [Fermilab]↗

Community dynamics and functional characteristics of naphthalene‐degrading populations in contaminated surface sediments and hypoxic/anoxic groundwater

Summary Earlier research on the biogeochemical factors affecting natural attenuation in coal‐tar contaminated groundwater, at South Glens Falls, NY, revealed the importance of anaerobic metabolism and trophic interactions between degrader and bacterivore populations. Field‐based characterizations of both phenomena have proven challenging, but advances in stable isotope probing (SIP), single‐cell imaging and shotgun metagenomics now provide cultivation‐independent tools for their study. We tracked carbon from 13 C‐labelled naphthalene through microbial populations in contaminated surface sediments over 6 days using respiration assays, secondary ion mass spectrometry imaging and shotgun metagenomics to disentangle the contaminant‐based trophic web. Contaminant‐exposed communities in hypoxic/anoxic groundwater were contrasted with those from oxic surface sediments to identify putative features of anaerobic catabolism of naphthalene. In total, six bacteria were responsible for naphthalene degradation. Cupriavidus , Ralstonia and Sphingomonas predominated at the earliest stages of SIP incubations and were succeeded in later stages by Stenotrophomonas and Rhodococcus. Metagenome‐assembled genomes provided evidence for the ecological and functional characteristics underlying these temporal shifts. Identical species of Stenotrophomonas and Rhodococcus were abundant in the most contaminated, anoxic groundwater. Apparent increases in bacterivorous protozoa were observed following exposure to naphthalene, though insignificant amounts of carbon were transferred between bacterial degraders and populations of secondary feeders.

Wilhelm, Roland C.↗

Recovery of phosphonate surface contaminants from glass using a simple vacuum extractor with a solid-phase microextraction fiber

Recovery of chemical contaminants from fixed surfaces for analysis can be challenging particularly if it is not possible to acquire a solid sample. A simple device is described that collects semivolatile organic compounds from fixed surfaces by creating an enclosed volume over the surface, then generating a modest vacuum. A solid-phase microextraction fiber is then inserted into the evacuated volume where it functions to sorb volatilized organic contaminants. The device is based on a syringe modified with a seal that is used to create the vacuum, with a perforable plunger through which the SPME fiber is inserted. The vacuum speeds partitioning of the semivolatile compounds into the gas phase, and reduces the boundary layer around the SPME fiber, which enables a fraction of the volatilized organics to partition into the SPME fiber. After sample collection the SPME fiber is analyzed using conventional gas chromatography/mass spectrometry. The methodology has been used to collect organophosphorus compounds from glass surfaces, to provide a simple test for the functionality of the devices. Thirty minute sampling times (deltaTvac) resulted in fractional recovery efficiencies ranged from 10(-3) to > 10(-1), and in absolute terms collection of low nanograms was demonstrated. Fractional recovery values were correlated to the vapor pressure of the compounds being sampled. Fractional recovery increased with increasing deltaTvac, and displayed a roughly logarithmic profile indicating that an operational equilibrium is being approached. Fractional recovery decreased with increasing time between exposure and sampling, however recordable quantities of the phosphonates could be collected three weeks after exposure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The BetaCage, an ultra-sensitive screener for surface contamination

Material screening for identifying low-energy electron emitters and alpha-decaying isotopes is now a prerequisite for rare-event searches (e.g., dark-matter direct detection and neutrinoless double-beta decay) for which surface radiocon-tamination has become an increasingly important background. The BetaCage, a gaseous neon time-projection chamber, is a proposed ultra-sensitive (and nondestructive) screener for alpha-and beta-emitting surface contaminants to which existing screening facilities are insufficiently sensitive. Sensitivity goals are 0.1 betas keV{sup −1} m{sup −2} day{sup −1} and 0.1 alphas m{sup −2} day{sup −1}, with the former limited by Compton scattering of photons in the screening samples and (thanks to tracking) the latter expected to be signal-limited; radioassays and simulations indicate backgrounds from detector materials and radon daughters should be subdominant. We report on details of the background simulations and detector design that provide the discrimination, shielding, and radiopurity necessary to reach our sensitivity goals for a chamber with a 95 × 95 cm{sup 2} sample area positioned below a 40 cm drift region and monitored by crisscrossed anode and cathode planes consisting of 151 wires each.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Correlation of Measured Surface Contaminants as a Function of Ion Beam Current in GSD Ion Implanters

An investigation into measured differences in surface contaminant levels when evaluating several ion implant tools and/or tool types. For a given species and energy, beam current appears to have a strong effect on final contaminant levels. Ideally one evaluates process integrity at machine set-up conditions that approximate or exceed the worst case conditions required for regular, volume wafer production. Some contaminants may exhibit a 'threshold' effect where they are easily observed with sufficient beam current, but not present at all for lower beam currents. Knowing the characteristics of the measurement process is essential in obtaining reliable results with a clear interpretation and better facilitates cross-site or cross-platform comparisons.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Detection of uranyl fluoride and sand surface contamination on metal substrates by hand-held laser-induced breakdown spectroscopy

Here, a hand-held device for laser-induced breakdown spectroscopy has been investigated for the determination of uranyl fluoride surface contamination. This research demonstrates the ability to successfully detect uranium on surfaces when using a low resolving power (λ/Δλ=4000) spectrograph, with a 5 mJ energy per 1 ns pulsed laser radiation, available as a commercially packaged hand-held system. Sand/uranyl fluoride mixtures are prepared to simulate residue likely encountered during decontamination efforts at facilities that handle uranium hexafluoride. Detection limits are described for four uranium lines with one revealing the capability to detect uranium at a level of 250 parts per million. Lastly, advantages of the studied compact device include that location specific information can be obtained on-site to augment contamination identification.

36 MATERIALS SCIENCE↗