Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface emissivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Improved Representations of Longwave Surface Emissivity to Reduce Surface and Atmospheric Heating Biases in Earth System Models

Abstract Many Earth system models (ESMs) approximate surface emissivity as a broadband constant. This approximation reduces the computational burden, yet omits the spectral structure of emissivity and atmospheric absorption. Neglecting spectral variation in surface emission introduces biases in longwave (LW) atmospheric fluxes and heating. Biases are strongest over surfaces with strongly varying emissivity and minimal atmospheric opacity. We examine these biases over water, ice, and snow surfaces. We partition spectral emissivity into the 16 spectral bands utilized by a single‐column atmospheric radiative transfer model (RRTMG_LW) commonly used in ESMs. We quantify flux and heating biases introduced by broadband assumptions relative to the spectrally resolved case for standard atmospheric profiles over each surface type. Current assumptions tend to overestimate upwelling surface fluxes; for example, the greybody assumption overestimates flux by 1.6 W/m 2 (0.52%) at the bottom of a mid‐latitude winter atmosphere over ice, and by 2.33 (1.0%) at the top of atmosphere. The blackbody assumption tends to artificially cool Earth's surface, stabilizing the lower troposphere. Interestingly, the optimal broadband emissivity can deviate from the Planck‐weighted mean by up to 3% depending on surface type and atmospheric profile. We investigate bias sensitivity to surface temperature, cloud water path, and atmospheric water vapor. Bias is most sensitive to water vapor content, and least sensitive to cloud water path. Lastly, we show that a modified greybody method with updated broadband values can reduce total surface flux bias up to 1.69 , comparable to a five‐band approach and at a fraction of the computational cost.

Manzo, L. [Department of Earth System Science Univ↗

Experimental studies of di-jet survival and surface emission bias in Au+Au collisions via angular correlations with respect to back-to-back leading hadrons

We report first results from an analysis based on a new multi-hadron correlation technique, exploring jet-medium interactions and di-jet surface emission bias at the BNL Relativistic Heavy Ion Collider (RHIC). Pairs of back-to-back high-transverse-momentum hadrons are used for triggers to study associated hadron distributions. In contrast with two- and three-particle correlations with a single trigger with similar kinematic selections, the associated hadron distribution of both trigger sides reveals no modification in either relative pseudorapidity {Delta}{eta} or relative azimuthal angle {Delta}{phi} from d+Au to central Au+Au collisions. We determine associated hadron yields and spectra as well as production rates for such correlated back-to-back triggers to gain additional insights on medium properties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Far-infrared surface emissivity and climate

Presently, there are no global measurement constraints on the surface emissivity at wavelengths longer than 15 μm, even though this surface property in this far-IR region has a direct impact on the outgoing longwave radiation (OLR) and infrared cooling rates where the column precipitable water vapor (PWV) is less than 1 mm. Such dry conditions are common for high-altitude and high-latitude locations, with the potential for modeled climate to be impacted by uncertain surface characteristics. This paper explores the sensitivity of instantaneous OLR and cooling rates to changes in far-IR surface emissivity and how this unconstrained property impacts climate model projections. At high latitudes and altitudes, a 0.05 change in emissivity due to mineralogy and snow grain size can cause a 1.8–2.0 W m⁻² difference in the instantaneous clear-sky OLR. A variety of radiative transfer techniques have been used to model the far-IR spectral emissivities of surface types defined by the International Geosphere-Biosphere Program. Incorporating these far-IR surface emissivities into the Representative Concentration Pathway (RCP) 8.5 scenario of the Community Earth System Model leads to discernible changes in the spatial patterns of surface temperature, OLR, and frozen surface extent. The model results differ at high latitudes by as much as 2°K, 10 W m⁻², and 15%, respectively, after only 25 y of integration. The calculated difference in far-IR emissivity between ocean and sea ice of between 0.1 and 0.2, suggests the potential for a far-IR positive feedback for polar climate change.

58 GEOSCIENCES↗

Time-Dependent Cryospheric Longwave Surface Emissivity Feedback in the Community Earth System Model

Frozen and unfrozen surfaces exhibit different longwave surface emissivities with different spectral characteristics, and outgoing longwave radiation and cooling rates are reduced for unfrozen scenes relative to frozen ones. In this paper physically realistic modeling of spectrally resolved surface emissivity throughout the coupled model components of the Community Earth System Model (CESM) is advanced, and implications for model high-latitude biases and feedbacks are evaluated. It is shown that despite a surface emissivity feedback amplitude that is, at most, a few percent of the surface albedo feedback amplitude, the inclusion of realistic, harmonized longwave, spectrally resolved emissivity information in CESM1.2.2 reduces wintertime Arctic surface temperature biases from -7.2 ± 0.9 K to -1.1 ± 1.2 K, relative to observations. The bias reduction is most pronounced in the Arctic Ocean, a region for which Coupled Model Intercomparison Project version 5 (CMIP5) models exhibit the largest mean wintertime cold bias, suggesting that persistent polar temperature biases can be lessened by including this physically based process across model components. The ice emissivity feedback of CESM1.2.2 is evaluated under a warming scenario with a kernel-based approach, and it is found that emissivity radiative kernels exhibit water vapor and cloud cover dependence, thereby varying spatially and decreasing in magnitude over the course of the scenario from secular changes in atmospheric thermodynamics and cloud patterns. Finally, accounting for the temporally varying radiative responses can yield diagnosed feedbacks that differ in sign from those obtained from conventional climatological feedback analysis methods.

54 ENVIRONMENTAL SCIENCES↗

An approach to sulfate geoengineering with surface emissions of carbonyl sulfide

Sulfate geoengineering (SG) methods based on lower stratospheric tropical injection of sulfur dioxide (SO 2 ) have been widely discussed in recent years, focusing on the direct and indirect effects they would have on the climate system. Here a potential alternative method is discussed, where sulfur emissions are located at the surface or in the troposphere in the form of carbonyl sulfide (COS) gas. There are two time-dependent chemistry–climate model experiments designed from the years 2021 to 2055, assuming a 40 Tg-Syr -1 artificial global flux of COS, which is geographically distributed following the present-day anthropogenic COS surface emissions (SG-COS-SRF) or a 6 Tg-Syr -1 injection of COS in the tropical upper troposphere (SG-COS-TTL). The budget of COS and sulfur species is discussed, as are the effects of both SG-COS strategies on the stratospheric sulfate aerosol optical depth (~Δτ=0.080 in the years 2046–2055), aerosol effective radius (0.46 µm), surface SO x deposition (+8.9 % for SG-COS-SRF; +3.3 % for SG-COS-TTL), and tropopause radiative forcing (RF; ~-1.5 W m –2 in all-sky conditions in both SG-COS experiments). Indirect effects on ozone, methane and stratospheric water vapour are also considered, along with the COS direct contribution. According to our model results, the resulting net RF is –1.3 W m –2 , for SG-COS-SRF, and –1.5 W m –2 , for SG-COS-TTL, and it is comparable to the corresponding RF of –1.7 W m –2 obtained with a sustained injection of 4 Tg-Syr -1 in the tropical lower stratosphere in the form of SO 2 (SG-SO2, which is able to produce a comparable increase of the sulfate aerosol optical depth). Significant changes in the stratospheric ozone response are found in both SG-COS experiments with respect to SG-SO2 (~5 DU versus +1.4 DU globally). According to the model results, the resulting ultraviolet B (UVB) perturbation at the surface accounts for –4.3 % as a global and annual average (versus –2.4 % in the SG-SO2 case), with a springtime Antarctic decrease of –2.7 % (versus a +5.8 % increase in the SG-SO2 experiment). Overall, we find that an increase in COS emissions may be feasible and produce a more latitudinally uniform forcing without the need for the deployment of stratospheric aircraft. However, our assumption that the rate of COS uptake by soils and plants does not vary with increasing COS concentrations will need to be investigated in future work, and more studies are needed on the prolonged exposure effects to higher COS values in humans and ecosystems.

54 ENVIRONMENTAL SCIENCES↗

Pan-tropical daily L-band microwave land surface emissivity retrieval from GNSS-R observations

The uncertainties in microwave land surface emissivity (MLSE) measurements have long limited the use of spaceborne microwave radiometer data. As an emerging observation method, Global Navigation Satellite System Reflectometry (GNSS-R) has demonstrated great potential in several land and ocean applications. In this study, a method for obtaining daily MLSE dataset in the pan-tropical region from Cyclone GNSS (CYGNSS) observations is presented and evaluated. The CYGNSS observations are first aggregated into the Equal-Area-Scalable-Earth (EASE) 2.0 36 km grid by a combined weight function of distance, time, and signal-to-noise ratio variance. Then, the method employs a pixel-by-pixel regression algorithm to conduct the daily MLSE retrieval using reference emissivity derived from the Soil Moisture Active Passive (SMAP) brightness temperature. The CYGNSS MLSE shows good agreement with SMAP MLSE, delivering an overall root-mean-square error (RMSE) of 0.022 and 0.017 for horizontal and vertical polarization, respectively, during the training set spanning the whole year of 2018. Furthermore, on the test set from January 2019 to May 2019, the RMSE values amounted to 0.030 and 0.023 for horizontal and vertical polarization, respectively. Temperature records from the International Soil Moisture Network are employed to calculate the emissivity and for in-situ validation, which yield an RMSE of 0.034 and 0.026 for the two polarizations, respectively. The proposed algorithm provides an encouraging approach to obtain accurate daily MLSE dataset for microwave remote sensing. Compared to the SMAP MLSE, the CYGNSS MLSE has a remarkable improvement of 86% in temporal resolution, greatly complementing the existing microwave emissivity datasets.

54 ENVIRONMENTAL SCIENCES↗

Reporting central tendencies of chamber measured surface emission and oxidation

Methane emissions, concentrations, and oxidation were measured on eleven MSW landfills in eleven states spanning from California to Pennsylvania during the three year study. The flux measurements were performed using a static chamber technique. Initial concentration samples were collected immediately after placement of the flux chamber. Oxidation of the emitted methane was evaluated using stable isotope techniques. When reporting overall surface emissions and percent oxidation for a landfill cover, central tendencies are typically used to report 'averages' of the collected data. The objective of this study was to determine the best way to determine and report central tendencies. Results showed that 89% of the data sets of collected surface flux have lognormal distributions, 83% of the surface concentration data sets are also lognormal. Sixty seven percent (67%) of the isotope measured percent oxidation data sets are normally distributed. The distribution of data for all eleven landfills provides insight of the central tendencies of emissions, concentrations, and percent oxidation. When reporting the 'average' measurement for both flux and concentration data collected at the surface of a landfill, statistical analyses provided insight supporting the use of the geometric mean. But the arithmetic mean can accurately represent the percent oxidation, as measured with the stable isotope technique. We examined correlations between surface CH{sub 4} emissions and surface air CH{sub 4} concentrations. Correlation of the concentration and flux values using the geometric mean proved to be a good fit (R{sup 2} = 0.86), indicating that surface scans are a good way of identifying locations of high emissions.

54 ENVIRONMENTAL SCIENCES↗

exoALMA. V. Gaseous Emission Surfaces and Temperature Structures

An analysis of the gaseous component in protoplanetary disks can inform us about their thermal and physical structure, chemical composition, and kinematic properties, all of which are crucial for understanding various processes within the disks. By exploiting the asymmetry of the line emission, or via line profile analysis, we can locate the emitting surfaces. Here, we present the emission surfaces of the exoALMA sources in 12 CO J = 3–2, 13 CO J = 3–2, and CS J = 7–6. We find that 12 CO traces the upper disk atmosphere, with mean $\langle$ z/r $\rangle$ values of ≈0.28, while 13 CO and CS trace lower regions of the disk with mean $\langle$ z/r $\rangle$ values of ≈0.16 and ≈0.18, respectively. We find that 12 CO $\langle$ z/r $\rangle$ and the disk mass are positively correlated with each other; this relationship offers a straightforward way to infer the disk mass. We derive 2D r – z temperature distributions of the disks. Additionally, we search for substructure in the surfaces and radial intensity profiles; we find evidence of localized substructure in the emission surfaces and peak intensity profiles of nearly every disk, with this substructure often being coincident between molecular tracers, intensity profiles, and kinematic perturbations. Four disks display evidence of potential photodesorption, implying that this effect may be common even in low far-ultraviolet star-forming regions. For most disks, we find that the physical and thermal structure is more complex than analytical models can account for, highlighting a need for more theoretical work and a better understanding of the role of projection effects on our observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Terahertz surface emission from Cu{sub 2}ZnSnSe{sub 4} thin film photovoltaic material excited by femtosecond laser pulses

We observed efficient terahertz (THz) emission from sol-gel grown Cu{sub 2}ZnSnSe{sub 4} (CZTSe) thin films using THz time domain spectroscopy technique. The THz emission bandwidth exceeds 2 THz with a dynamic range of 20 dB in the amplitude spectrum. The THz emission amplitude from CZTSe is found to be independent of external magnetic fields. Comparing the polarity of THz emission waveforms of CZTSe and GaAs, we suggest that the acceleration of photo-carriers in the surface accumulation layer of CZTSe is the dominant mechanism of radiation emission. Optical excitation fluence dependence measurements show that the saturation fluence of the CZTSe thin film reaches 1.48 μJ/cm{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Contribution of Microorganisms with the Clade II Nitrous Oxide Reductase to Suppression of Surface Emissions of Nitrous Oxide

The sources and sinks of nitrous oxide, as control emissions to the atmosphere, are generally poorly constrained for most environmental systems. Initial depth-resolved analysis of nitrous oxide flux from observation wells and the proximal surface within a nitrate contaminated aquifer system revealed high subsurface production but little escape from the surface. Further, to better understand the environmental controls of production and emission at this site, we used a combination of isotopic, geochemical, and molecular analyses to show that chemodenitrification and bacterial denitrification are major sources of nitrous oxide in this subsurface, where low DO, low pH, and high nitrate are correlated with significant nitrous oxide production. Depth-resolved metagenomes showed that consumption of nitrous oxide near the surface was correlated with an enrichment of Clade II nitrous oxide reducers, consistent with a growing appreciation of their importance in controlling release of nitrous oxide to the atmosphere. Our work also provides evidence for the reduction of nitrous oxide at a pH of 4, well below the generally accepted limit of pH 5.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of Gauss's theorem to quantify localized surface emissions from airborne measurements of wind and trace gases

Airborne estimates of greenhouse gas emissions are becoming more prevalent with the advent of rapid commercial development of trace gas instrumentation featuring increased measurement accuracy, precision, and frequency, and the swelling interest in the verification of current emission inventories. Multiple airborne studies have indicated that emission inventories may underestimate some hydrocarbon emission sources in US oil- and gas-producing basins. Consequently, a proper assessment of the accuracy of these airborne methods is crucial to interpreting the meaning of such discrepancies. We present a new method of sampling surface sources of any trace gas for which fast and precise measurements can be made and apply it to methane, ethane, and carbon dioxide on spatial scales of ~1000 m, where consecutive loops are flown around a targeted source region at multiple altitudes. Using Reynolds decomposition for the scalar concentrations, along with Gauss's theorem, we show that the method accurately accounts for the smaller-scale turbulent dispersion of the local plume, which is often ignored in other average mass balance methods. With the help of large eddy simulations (LES) we further show how the circling radius can be optimized for the micrometeorological conditions encountered during any flight. Furthermore, by sampling controlled releases of methane and ethane on the ground we can ascertain that the accuracy of the method, in appropriate meteorological conditions, is often better than 10 %, with limits of detection below 5 kg h -1 for both methane and ethane. Because of the FAA-mandated minimum flight safe altitude of 150 m, placement of the aircraft is critical to preventing a large portion of the emission plume from flowing underneath the lowest aircraft sampling altitude, which is generally the leading source of uncertainty in these measurements. Finally, we show how the accuracy of the method is strongly dependent on the number of sampling loops and/or time spent sampling the source plume.

54 ENVIRONMENTAL SCIENCES↗

The efficacy of aerosol–cloud radiative perturbations from near-surface emissions in deep open-cell stratocumuli

Aerosol–cloud radiative effects are determined and quantified in simulationsof deep open-cell stratocumuli observed during the VAMOS Ocean-Cloud-Atmosphere-LandStudy Regional Experiment (VOCALS-REx) campaign offthe west coast of Chile. The cloud deck forms in a boundarylayer 1.5 km deep, with cell sizes reaching 50 km in diameter. Global databases of shiptracks suggest that these linear structures are seldom found in boundarylayers this deep. Here, we quantify the changes in cloud radiative propertiesto a continuous aerosol point source moving along a fixed emission linereleasing 10 17 particles per second. We show that a spatially coherentcloud perturbation is not evident along the emission line. Yet our modelsimulates an increase in domain-mean all-sky albedo of 0.05, corresponding toa diurnally averaged cloud radiative effect of 20 W m -2 , given theannual mean solar insolation at the VOCALS-REx site. Therefore, markedchanges in cloud radiative properties in precipitating deep open cells may bedriven by anthropogenic near-surface aerosol perturbations, such as thosegenerated by ships.Furthermore, we demonstrate that these changes in cloud radiative propertiesare masked by the naturally occurring variability within the organised cloudfield. A clear detection and attribution of cloud radiative effects to aperturbation in aerosol concentrations becomes possible when sub-filtering ofthe cloud field is applied, using the spatio-temporal distribution of theaerosol perturbation. Therefore, this work has implications for the detectionand attribution of effective cloud radiative forcing in marine stratocumuli,which constitutes one of the major physical uncertainties within the climatesystem. Our results suggest that ships may sometimes have a substantialradiative effect on marine clouds and albedo, even when ship tracks are notreadily visible.

54 ENVIRONMENTAL SCIENCES↗

Ice Nucleating Particle Connections to Regional Argentinian Land Surface Emissions and Weather During the Cloud, Aerosol, and Complex Terrain Interactions Experiment

Abstract Here, we present a multi‐season study of ice‐nucleating particles (INPs) active via the immersion freezing mechanism, which took place in north‐central Argentina, a worldwide hotspot for mesoscale convective storms. INPs were measured untreated, after heating to 95°C, and after hydrogen peroxide digestion. No seasonal cycle of INP concentrations was observed. Heat labile INPs, which we define as “biological” herein, dominated the population active at −5 to −20°C, while non‐heat‐labile organic INPs (decomposed by peroxide) dominated at lower temperatures, from −20 to −28°C. Inorganic INPs (remaining after peroxide digestion), were minor contributors to the overall INP activity. Biological INP concentration active around −12°C peaked during rain events and under high relative humidity, reflecting emission mechanisms independent of the background aerosol concentration. The ratio of non‐heat‐labile organic and inorganic INPs was generally constant, suggesting they originated from the same source, presumably from regional arable topsoil based on air mass histories. Single particle mass spectrometry showed that soil particles aerosolized from a regionally common agricultural topsoil contained known mineral INP sources (K‐feldspar and illite) as well as a significant organic component. The INP activity observed in this study correlates well with agricultural soil INP activities from this and other regions of the world, suggesting that the observed INP spectra might be typical of many arable landscapes. These results demonstrate the strong influence of regional continental landscapes, emitting INPs of types that are not yet well represented in global models.

54 ENVIRONMENTAL SCIENCES↗